Indonesia Regulation & Pipelines International Standard & Certification INDOPIPE
The 5th International Indoensia Gas Infrastructure Conference & Exhibition by Rudiyanto, Chairman of APITINDO
Content 1. Indonesian Regulation 2. Pipeline Design Codes 3. Pipelines Definition 4. Consideration on the Pipelines Design, Installation and Testing 5. Certification Body and Personnel 6. Pipeline Certification and Recertification Scheme
Indonesian Regulatuon • Kepmen Pertambangan dan Energi Nomor 300K/38/M.PE/1997 Keselamatan Kerja Pipa Penyalur Minyak dan Gas Bumi • Keputusan Dirjen MIGAS Nomor : 84.K/38/DJM/1998 Pedoman Dan Tatacara Pemeriksaan Keselamatan Kerja Atas Instalasi, Peralatan Dan TeknikYang Dipergunakan Dalam Usaha Pertambangan Minyak Dan Gas Bumi Dan Penguasaan Sumberdaya Panas Bumi • Permen Energi dan Sumber Daya Mineral Nomor 15 Tahun 2008 Pemberlakuan Standar Nasional Indonesia Mengenai Sistem Transportasi Cairan Untuk Hidrokarbon dan Standar Nasional Indonesia Mengenai Sistem Perpipaan Transmisi dan Distribusi Gas Sebagai Standar Wajib • Kepmeneg Lingkungan Hidup Nomor 17 Tahun 2001 Jenis Rencana Usaha dan/atau Kegiatan yang Wajib Dilengkapi dengan Analisis Mengenai Dampak Lingkungan Hidup • Keputusan Dirjen MIGAS Nomor : 37K/70/DDJM/1990 Standar Dalam Operasi Pertambangan Minyak Dan Gas Bumi Dan Pengusahaan Sumber Daya Panasbumi •
Peraturan Dirjen MIGAS Nomor : 43P/382/DDJM/1992 Syarat-Syarat dan Tata Kerja PJIT Bidang Pertambangan Migas dan Sumber Daya Pengusahaan Panas Bumi
Indonesian Regulation • PP Nomor 19 Tahun 1973 Pengaturan Dan Pengawasan Keselamatan Kerja Dibidang Pertambangan • PP Nomor 17 Tahun 1974 Pengawasan Pelaksanaan Eksplorasi Dan Eksploitasi Minyak Dan Gas Bumi di Daerah Lepas Pantai • PP Nomor 11 Tahun 1979 Keselamatan Kerja Pada Pemurnian Dan Pengolahan Minyak Dan Gas Bumi • Permen Pertambangan & Energi Nomor 06P/0746/M.PE/1991 Pemeriksaan Keselamatan Kerja Atas Instalasi, Peralatan Dan TeknikYang Dipergunakan Dalam Pertambangan Minyak Dan Gas Bumi Dan Pengusahaan Sumberdaya Panasbumi
Pipeline Design Code • SNI 13-3473:2011 Sistem Transportasi Pipa Penyalur Untuk Cairan Hidrokarbon Dan Cairan Lain • SNI 13-3474:2009 Sistem Penyaluran Dan Distribusi Pipa Gas • ASME B31.4 Pipeline Transportation System for Liquid Hydrocarbons and Other Liquids • ASME B31.8 Gas Transmission and Distribution Piping Systems
Pipeline Definition and Scope • 300K/38/M.PE/1997 Piping system of oil and gas which includes of oil and gas which includes Flow line, Oil Transmission Pipeline, Gas Transmission Pipeline, Main Pipeline and Service Pipeline
• 84.K/38/DJM/1998 A line of connected pipe (conduit of pipe) and its associated facilities that are used for the conveyance of oil and gas and geothermal steam.
Pipeline Definition and Scope • 300K/38/M.PE/1997 Piping system of oil and gas which includes of oil and gas which includes Flow line, Oil Transmission Pipeline, Gas Transmission Pipeline, Main Pipeline and Service Pipeline
• 84.K/38/DJM/1998 A line of connected pipe (conduit conduit of pipe) and its associated facilities that are used for the conveyance of oil and gas and geothermal steam.
• SNI 13-3473:2011 3473:2011 and ASME B31.4 Scope refers to figure 400.1.1 / 2 of SNI 13-3473:2011 13 and figure 400.1.1-1 / 2 of ASME B31.4
• SNI 13-3474:2009 3474:2009 and ASME B31.8 All parts of physical facilities through which gas moves in transportation, including pipe, valves, fittings, flanges (including bolting and gaskets), regulators, pressure vessels, pulsation dampeners, relief valves, appurtenances attached to pipe, compressor units, metering facilities, pressure regulating stations, pressure limiting stations, pressure relief stations, and fabricated assemblies. Included within this definition are gas transmission and gathering lines, which transport gas from production facilities to onshore locations and gas storage equipment of the closed pipe type, that is fabricated or forged from pipe or fabricated from pipe and fittings. Scope refers to figure Q1, Q2 and Q3 of SNI 13-3474:2009 13 and ASME B31.8
Some Considerations to Indonesian Regulation Compliance • Applicable code and standard • Design and Installation * Location Class * Design Factor * Minimum distance • Testing * Procedure * Testing equipment and instrumentation * Holding time * Acceptance criteria
Migas Certification/Recertification Process Scheme
Certification Body and Qualified Personnel Permen Pertambangan & Energi No 06P/0746/M.PE/1991
Peraturan Direjen Migas Nomor 43P/382/DDJM/1992
Challenges •
THE MINIMUM ELIGIBILITY to whatever we have
•
THE MINIMUM ELIGIBILITY and RE-DEFINED 300K/38/M.PE/1997
Thank You
