ASOSIASI PENDIDIKAN TINGGI ARSITEKTUR INDONESIA

ASOSIASI PENDIDIKAN TINGGI ARSITEKTUR INDONESIA Bandung, 28 Oktober 2015 No. Hal Lamp.

: : ToT Autodesk : 6 (enam) berkas

Kepada Yth. Bapak / Ibu Ketua Jurusan / Program Studi Arsitektur Anggota APTARI (daftar terlampir) Di Tempat

Dengan hormat, Sebagai tindak lanjut kerjasama antara APTARI dengan Autodesk Indonesia, maka dengan ini kami mengundang maksimal 2 (dua) orang dosen dari setiap anggota APTARI untuk dapat mengikuti ToT software Autodesk Revit. Luaran dari training ini diharapkan kepada setiap peserta dapat membagi pengetahuan yang telah diperolehnya di lingkungan masing-masing baik sebagai pengajar mata kuliah atau studio maupun menjadi trainer untuk rekan-rekan dosen lainnya. Peserta Pelatihan diharapkan dosen yang telah mengenal Autodesk dan berkeinginan untuk mengelaborasi lebih jauh software Autodesk tersebut. Pendaftaran dilakukan dengan mengisi form excel dan dikirimkan kembali ke [email protected] dan [email protected] paling lambat tanggal 10 Desember 2015. Adapun kegiatan training ini akan diselenggarakan pada: Hari, tanggal Waktu Acara Tempat

: : : :

Senin - Kamis, 14 – 17 Desember 2015 08.00-16.00 (rincian acara terlampir) Terlampir Department Teknik Arsitektur Universitas Hasanuddin, Jalan Perintis Kemerdekaan km 10, Makassar, Sulawesi Selatan

Perlu disampaikan bahwa Autodesk Indonesia akan menyediakan materi workshop termasuk software, trainer, dan konsumsi selama kegiatan berlangsung. Sedangkan biaya perjalanan dan akomodasi mohon didanai dari masing-masing instansi pengirim. Untuk menjaga berbagai kemungkinan, diharapkan agar setiap peserta dapat membawa laptop/notebooknya masingmasing. Sekretariat APTARI: SAPPK INSTITUT TEKNOLOGI BANDUNG (ITB) Gedung Labtek IXA lt. 2 - Jl. Ganesha No. 10 Bandung 40132 Tlp: (022) 2504625 ext. 108 – fax: (022) 2500046 JURUSAN ARSITEKTUR INSTITUT TEKNOLOGI NASIONAL (ITENAS) Gedung 17 - Jl. PHH. Mustapha No. 23 Bandung 40124 Tlp: (022) 7272215 ext. 151 – fax: (022) 7202892

Untuk informasi lebih lanjut terkait pendaftaran dan lainnya, dapat menghubungi: Yuli Setiawati ( Lili ) Program Manager of Indonesia Autodesk Education Mobile : +62 81617770979 www.autodesk.com/education

Atas perhatian, kerja sama, serta kerhadirannya diucapkan banyak terimakasih.

Hormat Kami, APTARI,

Dr. Ir. Adib Abadi, MSc. Ketua

Tembusan : 1. Bu Lili Setiawati, Autodesk Indonesia

Sekretariat APTARI: SAPPK INSTITUT TEKNOLOGI BANDUNG (ITB) Gedung Labtek IXA lt. 2 - Jl. Ganesha No. 10 Bandung 40132 Tlp: (022) 2504625 ext. 108 – fax: (022) 2500046 JURUSAN ARSITEKTUR INSTITUT TEKNOLOGI NASIONAL (ITENAS) Gedung 17 - Jl. PHH. Mustapha No. 23 Bandung 40124 Tlp: (022) 7272215 ext. 151 – fax: (022) 7202892

ANGGOTA APTARI WILAYAH TIMUR : Jatim, jateng , DIY, Sulawesi, Maluku, NTT ,NTB, dan Bali

NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

INSTITUSI Institut Teknologi Adhitama Surabaya (ITATS), Surabaya Institut Teknologi Sepuluh November, Surabaya Universitas Atmajaya, Yogyakarta Universitas Brawijaya, Malang Universitas Diponegoro, Semarang Universitas Gadjah Mada, Yogyakarta Universitas Hasanuddin, Makassar Universitas Islam Indonesia, Yogyakarta Universitas Kristen Duta Wacana, Yogyakarta Universitas Kristen Petra, Surabaya Universitas Merdeka, Malang Universitas Muslim Indonesia, Makassar Universitas Negeri Sebelas Maret, Surakarta UPN “Veteran”, Surabaya Universitas Udayana, Bali UTY, Yogyakarta Universitas Negeri Semarang (UNNES) Sekolah Tinggi Teknik Malang (STTM) Universitas Islam Negeri, Malang Institut Teknologi Nasional, Malang Universitas Katolik Soegijapranata, Semarang Universitas Muhammadiyah Solo ATA YKPN Yogyakarta Universitas Tujuh Belas Agustus Semarang Universitas Tadulako Palu Universitas Tujuh Belas Agustus Surabaya Universitas Warmadewa Bali Universitas Kristen Tomohon Sulawesi Utara Institut Teknologi Minaesa Tomohon, Sulawesi Utara Universitas Katolik Widya Mandira, Kupang-Timor Universitas Sam Ratulangi, Manado Universitas Sains Al-Qur’an (UNSIQ), Jawa Tengah – Wonosobo Universitas Darma Cendika, Surabaya Universitas Pepabri, Makassar Universitas Muhammadiyah Kendari (UMK) STITEK Bina Taruna Gorontalo Universitas Khairun Ternate Universitas Negeri Gorontalo Universitas Negeri Alaudin Makassar Universitas Sains Teknologi Jayapura Universitas Widya Kartika, Surabaya Universitas Ichsan Gorontalo Universitas Malikussaleh

Agenda Acara Pelatihan Autodesk Revit Architecture Anggota APTARI Department Teknik Arsitektur Universitas Hasanuddin Jalan Perintis Kemerdekaan km 10, Makassar, Sulawesi Selatan Universitas Hasanuddin, 14 – 17 Desember 2015 Hari 1 Senin, 14 Desember 2015 08.00 – 16.00

08.00 – 08.30 = Registrasi Ulang & Pembukaan Chapter 1 - Introduction to BIM and Autodesk Revit  Building Information Modeling  Overview of the Interface  Standard Terminology  Starting Projects  Viewing Commands Chapter 2 - Basic Drawing and Modify Tools  Using General Drawing Tools  Editing Elements  Working with Basic Modify Tools  Working with Additional Modify Tools Chapter 3 - Setting Up Levels and Grids  Setting Up Levels  Linking and Importing CAD Files  Creating Structural Grids  Adding Columns Chapter 4 - Modeling Walls  Modeling Walls  Modifying Walls

Hari 2 Selasa, 15 Desember 2015 08.30 – 16.00

Chapter 5 - Working with Doors and Windows  Inserting Doors and Windows  Loading Door and Window Types from the Library  Creating Additional Door and Window Sizes Chapter 6 - Working with Curtain Walls  Creating Curtain Walls  Adding Curtain Grids  Working with Curtain Wall Panels  Attaching Mullions to Curtain Grids Chapter 7 - Working with Views  Duplicating Views  Adding Callout Views  Setting the View Display  Elevations and Sections Chapter 8 - Adding Components  Adding Components  Modifying Components

Hari 3 Rabu, 16 Desember 2015 08.30 – 16.00

Chapter 9 - Modeling Floors  Modeling Floors  Creating Shaft Openings  Creating Sloped Floors Chapter 10 - Modeling Ceilings  Modeling Ceilings  Adding Ceiling Fixtures  Creating Ceiling Soffits Chapter 11 - Modeling Roofs  Modeling Roofs  Creating Roofs by Footprint  Reference Planes and Work Planes  Creating Roofs by Extrusion  Cleaning Up Wall and Roof Intersections Chapter 12 - Vertical Circulation  Creating Component Stairs  Modifying Component Stairs  Working with Railings  Sketching Custom Stairs  Creating Ramps

Hari 4 Kamis, 17 Desember 2015 08.30 – 16.00

Chapter 13 - Creating Construction Documents  Setting Up Sheets  Placing and Modifying Views on Sheets  Printing Sheets Chapter 14 - Annotating Construction Documents  Working with Dimensions  Working With Text  Adding Detail Lines and Symbols  Creating Legends Chapter 15 - Adding Tags and Schedules  Adding Tags  Adding Rooms and Tags  Working with Schedules Chapter 16 - Creating Details  Setting Up Detail Views  Adding Detail Components  Annotating Details  Keynoting and Keynote Legends

BIM with Autodesk Revit Software Topics covered include: - Understand the purpose of Building Information Management (BIM) and how it is applied in the Autodesk Revit software. - Navigating the Autodesk Revit workspace and interface. - Working with the basic drawing and editing tools. - Creating Levels and Grids as datum elements for the model. - Creating a 3D building model with walls, curtain walls, windows, and doors. - Adding floors, ceilings, and roofs to the building model. - Creating component-based and custom stairs. - Adding component features, such as furniture and equipment. - Setting up sheets for plotting with text, dimensions, details, tags, and schedules. - Creating details. Training duration = 4 days Day 1, 14 December 2015 ( 09.00 am – 04.00 pm ) Chapter 1 - Introduction to BIM and Autodesk Revit  Building Information Modeling  Overview of the Interface  Standard Terminology  Starting Projects  Viewing Commands

Chapter 3 - Setting Up Levels and Grids  Setting Up Levels  Linking and Importing CAD Files  Creating Structural Grids  Adding Columns

Chapter 2 - Basic Drawing and Modify Tools  Using General Drawing Tools  Editing Elements  Working with Basic Modify Tools  Working with Additional Modify Tools

Chapter 4 - Modeling Walls  Modeling Walls  Modifying Walls

Day 2, 15 December 2015 ( 09.00 am – 04.00 pm ) Chapter 5 - Working with Doors and Windows  Inserting Doors and Windows  Loading Door and Window Types from the Library  Creating Additional Door and Window Sizes

Chapter 7 - Working with Views  Duplicating Views  Adding Callout Views  Setting the View Display  Elevations and Sections

Chapter 6 - Working with Curtain Walls  Creating Curtain Walls  Adding Curtain Grids  Working with Curtain Wall Panels  Attaching Mullions to Curtain Grids

Chapter 8 - Adding Components  Adding Components  Modifying Components

Day 3, 16 December 2015 ( 09.00 am – 04.00 pm ) Chapter 9 - Modeling Floors  Modeling Floors  Creating Shaft Openings  Creating Sloped Floors

Chapter 11 - Modeling Roofs  Modeling Roofs  Creating Roofs by Footprint  Reference Planes and Work Planes  Creating Roofs by Extrusion  Cleaning Up Wall and Roof Intersections

Chapter 10 - Modeling Ceilings  Modeling Ceilings  Adding Ceiling Fixtures  Creating Ceiling Soffits

Chapter 12 - Vertical Circulation  Creating Component Stairs  Modifying Component Stairs  Working with Railings  Sketching Custom Stairs  Creating Ramps

Day 4, 17 December 2015 ( 09.00 am – 04.00 pm ) Chapter 13 - Creating Construction Documents  Setting Up Sheets  Placing and Modifying Views on Sheets  Printing Sheets

Chapter 15 - Adding Tags and Schedules  Adding Tags  Adding Rooms and Tags  Working with Schedules

Chapter 14 - Annotating Construction Documents  Working with Dimensions  Working With Text  Adding Detail Lines and Symbols  Creating Legends

Chapter 16 - Creating Details  Setting Up Detail Views  Adding Detail Components  Annotating Details  Keynoting and Keynote Legends

----- THE END -----