SK-NET – Verbind de PC met de Controllers!
Verbind een computer met SK-NET software naar de SKACP-E & NOVA.16 Er zijn verschillende manieren om een computer met SK-NET software te verbinden met de SKACP-E & NOVA.16 Toegangscontrolepanelen. Hierbij een overzicht van de mogelijkheden. Via TCP/IP Netwerk Communicatie Veel installaties vandaag gebruiken een bestaande computernetwerk infrastructuur om het systeem te verbinden met 1 of meerdere PCs. De huidige centrale kan op 2 wijzes via TCP/IP verbonden worden op een bestaand LAN-netwerk: a) Rechtstreeks via CAT5e of CAT6 Ethernet kabel b) Draadloos via optionele inplugbare SK-WLSE-MOD art.code 12203601006 om te verbinden met een bestaande 802.11b/g Wireless Router De basissoftware SK-NET laat het gebruik van 1 TCP/IP verbinding op 1 PC toe. Dit kan door de 1e centrale SKACP/NOVA.16 (of de “Gateway” centrale) op het LAN-netwerk te zetten, en de overige centrales via RS-485 communicatie (CAT5 of 2x Twisted Pair). Elke centrale SKACP/NOVA.16 bevat een RS-485 aansluitmogelijkheid, dus geen extra adapters zijn nodig. Deze benadering kan ook gebruikt worden voor sites op afstand die verbonden kunnen worden naar de SK-NET gastcomputer via het Internet via een vast IPadres: terug moet de 1e centrale SKACP/NOVA.16 verbonden zijn via de locale router of hub, en alle andere centrales via netwerkverbinding vanaf het eerste paneel via RS-485. SK-WLSE-MOD
Indien meerdere TCP/IP verbindingen vereist zijn, moet de software SK-NETMLD art.code 12203620032 gebruikt worden. Als er meer dan 1 computer in het netwerk moet werken met SK-NET, bieden we Client/Server versies van het programma die 2, 5, 10 of 15 users toelaat een database te delen vanop een gemeenschappelijke server (op aanvraag).
Via RS-232 Communicatie Indien de computer binnen een afstand van 40m staat tot de dichtste SKACP/NOVA.16 dient u 6 niet-getwiste afgeschermde geleiders 0,8mm² direct te connecteren naar de PC’s COM poort (9-pins stekker te voorzien door de installateur). Voor een heel korte afstand bestaat een laptopkabel van 1,8m lang met COM-poort – art.code 12203601021 – RS232-E (enkel voor SKACP-E & NOVA.16; niet geschikt voor oudere generatie SKACP) Hou echter rekening dat veel recente computers geen seriele COM poort meer hebben. In dergelijk geval heeft u een USB naar RS232 converter nodig om de connectie te maken (te voorzien door de installateur – we kunnen u het merk MOXA type Uport 1110 aanraden). De driver van de converter maakt een virtuele COM poort in Windows.
Via RS-485 Communicatie
NETCONV-BB
Als u de computer wil bekabelen naar de 1e centrale SKACPE/NOVA.16, maar de afstand is voorbij 40m, kan u de NET-CONV BB adapter gebruiken (art. 12203650007). Dit converteert uw seriele COM-poort van RS-232 naar RS-485. Via een afgeschermde Twisted Pair kabel (FTPkabel, niveau 5), kan u tot 1,2km gaan tot de toegangscontrolepanelen.
Als uw PC geen COM-poort heeft, dient u een USB naar RS232 converter te installeren, en de NET-CONV BB in te pluggen in de USB/RS232 converter. Via een dial-up Modem
SK-MDM
Als u geen kabels kan voorzien tussen de computer en de centrales, zoals bij verschillende gebouwen, kan u langs telefoonlijn communiceren via een analoge modem. Bij de systeemlocatie (bij PC), kan u de ingebouwde PCmodem gebruiken, of een externe modem aankopen of een modemkaart toevoegen. We raden u aan om de SKMDM 56K-modem op de externe locatie (bij SKACPE / Nova.16) te gebruiken (ref 12203601017).
In ieder geval moet u de softwareversie SK-NET-MLD art.code 12203620032 aankopen om een modem te gebruiken; de basissoftware (SK-NET-DM) werkt niet met een modem.
SK-ACPe
Installation & Operating Manual
APPENDIX A
wiring and system configurations MULTI-PANEL SYSTEM USING SK-NETTM SOFTWARE- SINGLE LOCATION RS-232 CONNECTION “T” CONFIG
STAR /
USB
¿
SK-USB
DB9
2 SK-PLUG9
SK-ACPE
SK-ACPE
SK-ACPE
1 SK-ACPE
¿
SK-NET TM SOFTWARE
SK-ACPE
FANOUT
DAISY CHAIN / MULTIDROP
SK-ACPE
SK-ACPE
SK-ACPE
SK-ACPE
2
SK-ACPE
NETWORK CABLE:
RS-485 communications. Suggested cable: CAT 5 network cable or Two Twisted Pair. Total system cable length: 4,000 ft.
STUBBED SK-ACPE
SERIAL CABLE:
RS-232 communications. Suggested cable: 6-Conductor, Shielded, with no twisted pairs. PC or serial printer. Total cable length 100 feet. NOTE: Same wire to be used for connection from SK-ACPE to reader. Total cable length 500 feet. SK-USB may be required if your PC does not have a COM port.
¿
1
2
SERIAL PRINTER MONITORS ALL SYSTEM ACTIVITY*
NOTE: Each SK-ACPE above can support 2 Wiegand output card readers. * See Appendix D for printer configuration.
Figure A-1
A-1
1
SK-ACPe
Installation & Operating Manual
MULTI-PANEL SYSTEM USING SK-NETTM SOFTWARE- SINGLE LOCATION RS-485 with CONVERTER
2
USB
¿
¿
SK-NET TM SOFTWARE
NET-CONV-P RS-232-RS-485 CONVERTER
SK-USB
2
SK-ACPE
SK-ACPE
SK-ACPE
SK-ACPE
2
¿
1
1
1
NETWORK CABLE:
RS-485 communications. Suggested cable: CAT 5 network cable or Two Twisted Pair. Total system cable length: 4,000 ft.
SERIAL CABLE:
RS-232 communications. Suggested cable: 6-Conductor, Shielded, with no twisted pairs. PC or serial printer. Total cable length 100 feet. NOTE: Same wire to be used for connection from SK-ACPE to reader. Total cable length 500 feet. SK-USB may be required if your PC does not have a COM port.
SERIAL PRINTER MONITORS ALL SYSTEM ACTIVITY*
Note: When using the RS-232 to RS-485 converter, you cannot use the stubbed, star fanout or “T” configuration. All network connections from SK-ACPE to the next SK-ACPE must be in parallel with each other. The J8 connector, Pins 1 and 2 must be a twisted pair. Pin 3 (Ground) is not connected. * See Appendix D for printer configuration.
MULTI LOCATION SYSTEM WITH SK-NET-MLD SOFTWARE
MODEM
TELCO LINE
NET-CONV-P
MODEM SK-MDM
2
SK-ACPE
¿
¿
¿
¿
SK-NETTM SOFTWARE
¿
1
RS-232 GATEWAY SK-ACPE
1
¿
SK-ACPE
1
SK-ACPE
SK-ACPE
Up to 100 SK-ACPE’s
A virtually unlimited number of remote locations can be set-up on one PC with SK-NET-MLD Software. See Appendix “C” setup instructions
Figure A-2
A-2
Up to 100 SK-ACPE’s
¿
¿
SK-ACPE
SK-ACPe
Installation & Operating Manual
MULTI-PANEL SYSTEM USING SK-NETTM SOFTWARE- SINGLE LOCATION WITH LAN CONNECTION NOTE: SK-NET-MLD software must be used when connecting more than one Connection Group.
¿
SK-NET TM SOFTWARE
3
DAISY CHAIN / MULTIDROP SK-ACPE
1
“T” CONFIG
STAR / FANOUT
SK-ACPE
SK-ACPE SK-ACPE
SK-ACPE
¿
¿
NETWORK
SK-ACPE
SK-ACPE
SK-ACPE
SK-ACPE
2
3
NETWORK CABLE:
RS-485 communications. Suggested cable: CAT 5 network cable or Two Twisted Pair. Total system cable length: 4,000 ft.
SK-ACPE
STUBBED SK-ACPE
¿
1
2
SERIAL CABLE:
RS-232 communications. Suggested cable: 6-Conductor, Shielded, with no twisted pairs. PC or serial printer. Total cable length 100 feet. NOTE: Same wire to be used for connection from SK-ACPE to reader. Total cable length 500 feet.
ETHERNET CABLE:
Standard Ethernet cable connector connected to existing LAN.
SERIAL PRINTER MONITORS ALL SYSTEM ACTIVITY*
NOTE: Each SK-ACPE above can support 2 Wiegand output card readers.
* See Appendix D for printer configuration. Figure A-3
A-3
1
SK-ACPe
Installation & Operating Manual
APPENDIX B
SYSTEM components ACCESSORIES:
EQUIPMENT:
NET-CONV-P — RS-232 to RS-485 Converter with SK-ACPE: Two Door Access Control Unit with Ethernet connector Power Supply - one required per system (unless using a gateway connection) RS-232E— Serial Cable Assembly For Bench Testing or field connection with a laptop
READERS/CARDS: RK-WM or RK-WS or RK-WL Proximity Readers (2 per SK-ACPE)
SK-MDM — Modem - 56K Baud External Modem for dial-up connection to any SK-ACPE with MLD software
RKCM-02 Molded Proximity Cards Specify Quantity or RKKT-02 Key Tags or RKCI-02 ISO Image-able cards
SK-PLUG9 — Computer connector (DB9) with wire pigtail. SK-ACPE-PS — Transformer and stand by battery for SK-ACPE.
ET4-WXM, ET4-WXS, ET8-RO-W-D, or ET8-RO-W-M Contactless Smart Card Reader (2 per SK-ACPE)
SK-XFRMR – 16.5VAC 40VA Transformer for SK-ACPE-LE.
ETCI ISO Image-able Contactless Smart Cards Specify Quantity or ETST Key Tags
SK-USB– Converts USB Port at PC to serial COM Port with DB9 connector SK-WLSE-MOD – Wireless LAN adapter, 802.11 b/g. Powered by SK-ACPE-LE. Connect at J12 and set jumpers.
SOFTWARE: SK-NET™ — Basic Software SK-NET™ -MLD — Multi-Location Dial-Up Software SK-NET™ -MLD — C/S 2, 5,10,15 Client/Server Software for Multiple Workstations
SK-TS-CP – Enclosure tamper switch. Connect to tamper input, J7 pin 1 & 6. SK-24VDC–24 VDC Plug-In Power Supply, 1A dtk-cr – Surge protection for card readers and keypads dtk-xr – Surge protection for power, data and phone lines
B-1
SECURA KEY CARD ACCESS CONFIGURATION GUIDE Multi-Reader Systems with NOVA.16 (SK-MRCP) 16-Door Panel NOVA.16 (SK-MRCP) SYSTEM USING SK-NETTM SOFTWARE WITH RS-232 GATEWAY CONNECTED DIRECTLY TO A PC POWER: EIGHT (8) SMART READERS EVENLY SPACED UP TO 2000 FT. WITH 18/2 * DATA: UP TO 4000 FT. TOTAL WITH CAT 5. 5e OR 6
RS-232 GATEWAY USB
¿ SK-USB
2
DB9
SK-PLUG9
¿
RS-232
1
NOVA.16
UP TO 100 Ft. 1
2
3
......16
NOVA.16 (SK-MRCP) SYSTEM USING SK-NETTM SOFTWARE WITH RS-232 TO RS-485 CONVERTER (NET-CONV-P) POWER: EIGHT (8) SMART READERS EVENLY SPACED UP TO 2000 FT. WITH 18/2 * DATA: UP TO 4000 FT. TOTAL WITH CAT 5. 5e OR 6
NET-CONV-P RS232-RS485 CONVERTER PLUG INTO SK-USB
¿
UP TO 4,000 Ft.
1
1
RS-485
SK-USB
NOVA.16
¿
1
1
2
3
......16
* NOVA.16 HAS TWO SEPARATELY FUSED 14VDC POWER OUTPUTS - EACH HANDLES MULTIPLE READERS NOVA.16 (SK-MRCP) SYSTEM USING SK-NETTM SOFTWARE WITH SINGLE LOCATION RS-232 CONNECTION
STAR /
¿
SK-USB
1
2
DB9
2
1
“T” CONFIG
NOVA.16
¿
USB
NOVA.16
FANOUT
DAISY CHAIN / MULTIDROP NOVA.16
NOVA.16
SK-PLUG9
RS-485 NETWORK CABLE:
RS-485 communications. Suggested cable: CAT 5 cable or Two Twisted Pair. Total system cable length: 4,000 ft.
SERIAL CABLE:
RS-232 communications. Suggested cable: 6-Conductor, Shielded, with no twisted pairs. PC or serial printer. Total cable length 100 feet. SK-USB may be required if your PC does not have a COM port.
Page 1
STUBBED
NOVA.16
1
NOVA.16
NOVA.16
NOTE: Each SK-MRCP above can support 16 Smart readers.
NOVA.16 (SK-MRCP) MULTI LOCATION SYSTEM WITH SK-NET-MLD SOFTWARE
1 USB
SK-USB
SK-USB
MODEM
MODEM SK-MDM
TELCO LINE
NET-CONV-P
2
1
A virtually unlimited number of remote locations can be set-up on one PC with SK-NET-MLD Software.
NOVA.16
Up to 13 NOVA.16’s
Up to 13 NOVA.16’s
Network Wiring Connections NOVA.16
Earth Grounded Shield is highly
J2
¿ Line B (1)
¿
Line A (2) DC SIGNAL GROUND (3) (REQUIRED)
environments Earth recommended Grounded Shield in is highly recommended in environments subject to electrical subject to high voltage high voltage electrical discharge (i.e. discharge (i.e. lightning). Shield lightning). Shield should be connected to earth ground only at one end of the cable. should be connected to earth DC Signal ground is required. DC ground onlytoat end of Ground wire is NOT beone connected to the cable. earth ground. DC Signal ground is required. DC Ground wire is NOT to be connected to earth ground.
NOVA.16 (SK-MRCP) SYSTEM USING SK-NETTM SOFTWARE SINGLE LOCATION RS-485 with CONVERTER NET-CONV-P RS232-RS485 CONVERTER PLUG INTO SK-USB USB
¿
¿
NOVA.16
NOVA.16
¿
USB
¿
¿
1
RS-232 GATEWAY
¿
¿
NOVA.16
SK-USB
1
RS-485 NETWORK CABLE:
2
SERIAL CABLE:
1
1 NOVA.16
NOVA.16
NOVA.16
RS-485 communications. Suggested cable: CAT 5 cable or Two Twisted Pair. Total system cable length: 4,000 ft. RS-232 communications. Suggested cable: 6-Conductor, Shielded, with no twisted pairs. PC or serial printer. Total cable length 100 feet. SK-USB may be required if your PC does not have a COM port.
Note: When using the RS-232 to RS-485 converter, you cannot use the stubbed, star fanout or “T” configuration. All network connections from SK-MRCP to the next SK-MRCP must be in parallel with each other. The J2 connector, Pins 1 and 2 must be a twisted pair. Pin 3 (Ground) uses a conductor from another pair, if you are using CAT 5 or CAT 6 cable .
Page 2
¿
NOVA.16 (SK-MRCP) SYSTEM USING SK-NET-MLD SOFTWARE WITH MULTIPLE LAN CONNECTIONS
ROUTER/SWITCH
WIRED/WIRELESS ROUTER
HUB
NOVA.16 WITH OPTIONAL SK-WLSE MOD* NOVA.16
NOVA.16
3
ETHERNET CABLE: (Required cables CAT 5e or CAT 6).
Wired: max distance 300’ (100m) between devices. Wireless: Typically 100-200’ (30-60m) depending on interference, building structure and metal objects.
NOTE: Each SK-MRCP above can support 16 Smart Readers.
* Call Factory for availability.
NOVA.16 (SK-MRCP) SYSTEM USING SK-NETTM SOFTWARE SINGLE LOCATION WITH LAN CONNECTION NOTE: SK-NET-MLD software must be used when connecting more than one SK-MRCP to the LAN. This can also be a remote location connected over a WAN, if a static IP address is used at each remote site.
STAR /
1
¿
NOVA.16
RS-485 NETWORK CABLE:
2
SERIAL CABLE:
3
FANOUT
DAISY CHAIN / MULTIDROP
3
1
NOVA.16
¿
¿
NETWORK
NOVA.16
STUBBED
RS-485 communications. Suggested cable: CAT 5 cable or Two Twisted Pair. Total system cable length: 4,000 ft.
NOVA.16
RS-232 communications. Suggested cable: 6-Conductor, Shielded, with no twisted pairs. PC or serial printer. Total cable length 100 feet.
ETHERNET CABLE:
Standard Ethernet cable connector connected to existing LAN.
NOTE: Each SK-MRCP above can support 16 smart readers.
Page 3
“T” CONFIG NOVA.16
NOVA.16
NOVA.16
1
SYSTEM equipment components ACCESS CONTROL UNIT: NOVA.16 (SK-MRCP): 16-Door Access Control Unit with Ethernet connector Radio Key® Low Frequency Proximity READERS - Proximity Smart Reader (16 per SK-MRCP) RKDT-SR-M (Mullion Style Reader) RKDT-SR-S (Switchplate Style Reader)
CARDS/TAGS: RKCM-02-2 RKKT-02-2 RKCI-02-2
Molded Proximity Cards - 26/32 bit encoding Key Tags - 26/32 bit encoding ISO Proximity Cards - 26/32 bit encoding
E*Tag® High Frequency Proximity: READERS -Contactless Smart Readers (16 per SK-MRCP) ET8-SR-X-M (Mullion Style Reader) ET8-SR-X-D-W, or ET8-SR-X-D-I (Switchplate/ Decora Style Reader, white or ivory) CARDS/TAGS: ETCI04-1- ISO Card- 26/32 bit encoding ETCI04-4- ISO Card- 26/32 bit encoding, Mag-Stripe ETST03-1-Key Tag Trapezoidal - 26/32 bit encoding ETKT03-1 Key Tag, Rounded End, 26/32 bit encoding SOFTWARE: SK-NET™-DM - Basic Software - USB Flash Drive & Manual SK-NET™ -MLD - Multi-Location Software with USB Flash Drive and manual SK-NET-MLD - CSXX (XX= 2,5,10 or 15 workstations) USB Flash Drive and Manual with Client Server License
PC REQUIREMENTS: See Table ACCESSORIES:
MINIMUM REQUIREMENTS* OPERATING SYSTEM
PROCESSOR SPEED
RAM
AVAILABLE DISK SPACE
WINDOWS® XP OR NEWER
1 GHz
1 GB
1 GB
* For larger installation more disk space may be required. RECOMMENDED SYSTEM WINDOWS® XP OR NEWER
2 GHz
2 GB
10 GB
* For larger installation more disk space may be required. SERVER REQUIREMENT (FOR CLIENT/SERVER VERSIONS)** WINDOWS® 2003 OR NEWER
2 GHz
1 GB
1 GB
** For SK-NET-MLD-C/S version, a server is required to install ADS and the database. SK-NET™ must be installed on a workstation only. Required Peripherals: RS-232 COM Port, USB Port or TCP/IP, a modem if you use dial-up and a printer for reports.
NET-CONV-P - RS-232 to RS-485 Converter with Power Supply (plug into SK-USB) RELAY BOARDS — ELK-924 Sensitive Relay, Altronix RBSN or RBSNTTL Relay Modules (Contact your dist.) RS-232E - Connects J11 MTA connector to DB9 SK-24VDC - DC power supply, provides 1A@24VDC. SK-SR1 - SecuRelay™ Intelligent Relay Module SK-MDM - Modem - 56K Baud External Modem for dial-up connection to any SK-MRCP with MLD software SK-ACP-PS - 1A, 24VDC 4.0 AH supply and stand by battery for SK-MRCP. SK-BAT - 4.0 AH standby battery for SK-MRCP. SK-PLUG9 - Computer connector (DB9) with wire pigtail. SK-USB - Converts USB Port at PC to serial COM Port with DB9 connector SK-WIO-1 - One-door Wiegand Reader Interface, Connects to RS-485 Peripheral Bus SK-WLSE-MOD* - Wireless LAN adapter, 802.11 b/g. Powered by SK-MRCP. Connect at J6 and set jumpers. SK-XFRMR - 16.5VAC 40VA Transformer for SK-MRCP. * Contact Factory for Availability.
Page 4
SECURA KEY sk-MRCP Typical Door Installation ¿ 2
INPUT 1
TO PC HOST
3 , 4 , 5
INPUT 2 DOOR MONITOR NOVA.16
2
REMOTE DOOROPEN SWITCH
6
SMART READER L A T C H
1
1
ELECTRIC STRIKE or MAG LOCK
PERIPHERAL BUS
1 POWER
STRIKE OR MAGLOCK SUPPLY
¿
6
CABLE TYPES:
7995
RS485 PERIPHERIAL BUS (TO ADDITIONAL SMART READERS)
1
2 COND, 16-18 AWG
2
2 COND, SHIELDED 18-24 AWG
3
RS-485 - CAT 5 NETWORK CABLE OR TWO TWISTED PAIR
4
TCP/IP - CAT 5e OR CAT6 ETHERNET CABLE
5
RS232-5 or 6 CONDUCTOR, SHIELDED, NON-TWISTED
6
DATA & READER POWER CABLE: - CAT 5 (RS-485) + 18/2 (reader Power) - Coleman 97395-06-23 CAT5 + 18/2 siamese cable
Page 5
20301 NORDHOFF STREET CHATSWORTH, CA 91311 PHONE (818) 882-0020 • FAX (818) 882-7052 TOLL FREE (800) 891-0020
[email protected] • www.securakey.com
