Fail
iOLM + FIP Report FIP General Information
iOLM General Information Filename:
cichnova-lp.iolm
Filename:
cichnova-L.cmax2
Test date:
13.3.2014
Test date:
13.3.2014
Test time: Job ID: Customer: Company: Operator: Unit model: Unit S/N:
15:57 (GMT+01:00) 67 prof. Filka Studenti SSIPF Brno Petr Kormaňák MAX-715B-M3-EA 722831
Test time:
15:14 (GMT+01:00)
Job ID:
67
Customer:
prof. Filka Studenti SSIPF Brno Petr Kormaňák FIP-420B
Calibration date:
13.8.2013
Company: Operator: Unit model: Unit S/N: Comments:
754387
Comments:
FIP Identifiers
iOLM Identifiers Cable ID: Fiber ID:
3
Location A:
Levý
Location B:
Pravý
Cable ID: Fiber ID: Connector ID: Location:
3 Pravý Levý
None:
iOLM Results Wavelength (nm)
FIP Results Table Link ORL (dB)
Link loss (dB)
Propagation delay (µs)
1550
0,033
46,26
---
1310
0,145
43,96
---
1625
46,43
0,048
Link length:
0,3177 km
Acquisition status:
Completed
---
Zone
Scratches Criteria
Defects Count
A: Core
0µm≤size<3µm
0
3µm≤size<∞ B: Cladding
0µm≤size<5µm
C: Adhesive D: Contact
Criteria
Count
0µm≤size<5µm
1
0
5µm≤size<∞
0
0
0µm≤size<2µm
0
5µm≤size<∞
0
2µm≤size<5µm
0
---
---
0µm≤size<∞
5µm≤size<∞
0
---
---
0 0µm≤size<10µm
14
10µm≤size<∞
iOLM Pass/Fail Thresholds
FIP Thresholds
1310 nm
1550 nm
Max. link loss
45,000 dB
45,000 dB
Min. link loss
0,000 dB
0,000 dB
Max. link ORL
15,00 dB
15,00 dB
Max. splice loss
1,000 dB
1,000 dB
Max. connector loss
1,000 dB
1,000 dB
Reflectance
-40,0 dB
-40,0 dB
Signature:
7
Zone
A: Core B: Cladding
C: Adhesive D: Contact
Scratches
Defects
Criteria 0µm≤size<3µm 3µm≤size<∞
Thr. any 0
Criteria 0µm≤size<5µm 5µm≤size<∞
Thr. 4 0
0µm≤size<5µm 5µm≤size<∞
any 0
0µm≤size<2µm 2µm≤size<5µm 5µm≤size<∞
any 5 0
---
---
---
---
0µm≤size<∞
any
0µm≤size<10µm 10µm≤size<∞
any 0
Date: 15.4.2014
Page 1 of 3
Fail
iOLM + FIP Report iOLM Test Settings
FIP Test Parameters
Launch fiber length:
0,5000 km
Configuration:
Receive fiber length:
0,0000 km
Connector type: (SF) Single-Fiber connector
IOR:
1,468325
Fiber type:
(MM) Multiple-Mode fiber
Backscatter:
-81,87 dB
Polishing type:
(PC) Physical contact
Fiber core size:
9 µm
Focus level:
84.00% (Nominal)
IEC MM SF PC
FIP Graphs A->B
Signature:
Date: 15.4.2014
Page 2 of 3
Fail
iOLM + FIP Report Link View
iOLM Table Element Type
Position (km)
Loss (dB) 1310 nm
Reflectance (dB)
1550 nm
1310 nm
Diagnostic
1550 nm
-0,5060
0,723
0,486
-41,8
-43,8
Connector (A)
0,0000
-0,048
-0,112
-52,5
-55,1
Connector (B)
0,3177
---
---
>-13,6
Connector
Signature:
>-13,6 To characterize loss and include the element in link loss and ORL, a receive fiber is required. Element reflectance is greater than the indicated value. It is not possible to determine beyond any doubt that the value is pass.
Date: 15.4.2014
Page 3 of 3
Pass
iOLM + FIP Report FIP General Information
iOLM General Information Filename:
cichnova-pl.iolm
Filename:
cichnova-P.cmax2
Test date:
13.3.2014
Test date:
13.3.2014
Test time: Job ID: Customer: Company: Operator: Unit model: Unit S/N:
15:39 (GMT+01:00) 67 prof. Filka Studenti SSIPF Brno Petr Kormaňák MAX-715B-M3-EA 722831
Test time:
15:16 (GMT+01:00)
Job ID:
67
Customer:
prof. Filka Studenti SSIPF Brno Petr Kormaňák FIP-420B
Calibration date:
13.8.2013
Company: Operator: Unit model: Unit S/N: Comments:
754387
Comments:
FIP Identifiers
iOLM Identifiers Cable ID: Fiber ID:
3
Location A:
Levý
Location B:
Pravý
Cable ID: Fiber ID: Connector ID: Location:
3 Pravý Levý
None:
iOLM Results Wavelength (nm)
FIP Results Table Link ORL (dB)
Link loss (dB)
Propagation delay (µs)
1550
0,259
46,18
---
1310
0,394
44,31
---
1625
46,92
0,368
Link length:
0,3174 km
Acquisition status:
Completed
---
Zone
Scratches Criteria
Defects Count
A: Core
0µm≤size<3µm
0
3µm≤size<∞ B: Cladding
0µm≤size<5µm
C: Adhesive D: Contact
Criteria
Count
0µm≤size<5µm
0
0
5µm≤size<∞
0
0
0µm≤size<2µm
0
5µm≤size<∞
0
2µm≤size<5µm
0
---
---
0µm≤size<∞
5µm≤size<∞
0
---
---
0 0µm≤size<10µm
0
10µm≤size<∞
iOLM Pass/Fail Thresholds
FIP Thresholds
1310 nm
1550 nm
Max. link loss
45,000 dB
45,000 dB
Min. link loss
0,000 dB
0,000 dB
Max. link ORL
15,00 dB
15,00 dB
Max. splice loss
1,000 dB
1,000 dB
Max. connector loss
1,000 dB
1,000 dB
Reflectance
-40,0 dB
-40,0 dB
Signature:
0
Zone
A: Core B: Cladding
C: Adhesive D: Contact
Scratches
Defects
Criteria 0µm≤size<3µm 3µm≤size<∞
Thr. any 0
Criteria 0µm≤size<5µm 5µm≤size<∞
Thr. 4 0
0µm≤size<5µm 5µm≤size<∞
any 0
0µm≤size<2µm 2µm≤size<5µm 5µm≤size<∞
any 5 0
---
---
---
---
0µm≤size<∞
any
0µm≤size<10µm 10µm≤size<∞
any 0
Date: 15.4.2014
Page 1 of 3
Pass
iOLM + FIP Report iOLM Test Settings
FIP Test Parameters
Launch fiber length:
0,5000 km
Configuration:
Receive fiber length:
0,0000 km
Connector type: (SF) Single-Fiber connector
IOR:
1,468325
Fiber type:
(MM) Multiple-Mode fiber
Backscatter:
-81,87 dB
Polishing type:
(PC) Physical contact
Fiber core size:
9 µm
Focus level:
69.00% (Nominal)
IEC MM SF PC
FIP Graphs B->A
Signature:
Date: 15.4.2014
Page 2 of 3
Pass
iOLM + FIP Report Link View
iOLM Table Element Type
Position (km)
Loss (dB) 1310 nm
Reflectance (dB)
1550 nm
1310 nm
Diagnostic
1550 nm
-0,5061
0,708
0,496
-41,6
-43,7
Connector (A)
0,0000
0,251
0,157
-51,8
-52,5
Splice
0,1489
0,044
0,011
---
---
Connector (B)
0,3174
---
---
>-13,9
Connector
Signature:
>-13,7 To characterize loss and include the element in link loss and ORL, a receive fiber is required. Element reflectance is greater than the indicated value. It is not possible to determine beyond any doubt that the value is pass.
Date: 15.4.2014
Page 3 of 3
OLTS Report v4.0.3 - EXFO Electro-Optical Engineering Inc.
Stránka č. 1 z 1
Protokol Informace o zakázce ID zakázky: MS Mikrotrubickovani Důvod: urceni viteze MS Zadavatel: PROFiber Networking Zákazník: prof. Filka Zakázka uživatele 1: mereni FTTH propoje
Datum:
13.3.2014 16:25:14
Operátor A: Petr Kormanak Operátor B: Kormik Zakázka uživatele 2:
Informace o kabelu ID kabelu: CABLE001 Pozice A: levy konektor Výrobce kabelu: OFS Uživatelský kabel 1:
Pozice B: pravy konektor Typ kabelu: MiDia Breeze LT Uživatelský kabel 2:
Systemové informace Přístroj A FOT-932 396481
Jméno přístroje: Sériové číslo:
Přístroj B FOT-932 414533
FasTesT ID vlákna
FIBER001
Vlnová délka (nm)
Útlum A->B (dB)
Ref. A->B (dB)
Útlum B->A (dB)
Ref. B->A (dB)
Průměr (dB)
ORL A (dB)
ORL B (dB)
1310
0.07
1.62
0.06
1.61
0.07
>24.69
>23.63
1550
0.17
1.15
0.16
1.16
0.16
>25.77
>24.69
1625
0.29
0.74
Délka (km) 0.317
>380.24
(13.3.2014 16:26:45) Studenti SSIPF Brno FIBER002
1310
0.20
1.62
0.19
1.61
0.19
>24.95
>23.87
1550
0.27
1.15
0.34
1.16
0.31
>25.99
>25.07
1625
0.31
0.74
0.314
>380.21
(13.3.2014 16:28:35) Fibre Optics Service, s. r. o.
file:///C:/Users/Petr%20Kormaňák/Documents/OLTS/Report/radFF4B8.tmp.xml
14.4.2014
