Thermo Dynamic zonne-energie Energie besparend en efficiënt t.o.v. heet(tap)water
Solar technologie in uw omgeving Een geoptimaliseerd systeem Milieubewust Thermo dynamic panelen: uniek & innovatief
Het Thermo Dynamic systeem garandeert u, 24 uur per dag, warm (tap)water voor de badkamer, keuken, lage temperaturen radiatoren en binnenbaden.
Zelfs bij bewolking, regen en 's nachts heeft u warm water. Dit is het grootste voordeel t.o.v. traditionele zonnepanelen, welke gelimiteerd zijn aan directe zonneschijn en vaste zuidelijke positie(Noordelijk halfrond). Het Thermo Dynamic systeem voldoet aan de hoogste Europese eisen op het gebied van efficiency en het besparen van energie. Onze organisatie ondersteunt het welzijn van de medemens. Daarom doen wij er alles aan om het belang van duurzame energie te delen.
3
Het Thermo Dynamic paneel, uniek & innovatief Eigenschappen • Onbrandbaar • Non-corrosief • Niet giftig • Chemisch stabiel, zowel bij hoge druk als temperatuur • Milieuvriendelijk
De panelen bevatten koudemiddel 134A en 407C.
Eigenschappen: • De levensduur is meer dan 25 jaar. Het paneel is gemaakt van geanodiseerd aluminium, van 30µm. - Bestand tegen hoge en lage temperaturen. - Stevigheid. - Bestand tegen corrosie. • De laatste generatie solar collectoren bestaat uit een dubbelkanaalspaneel waarin koelvloeistof circuleert. Hierdoor wordt er dag en nacht warmte gegenereerd. • Transportvriendelijk, d.m.v. het kleine formaat: 2,00 m x 0,80 m. • Uiteenlopende installatie mogelijkheden op muren, daken en ieder ander mogelijk oppervlak. Het is niet nodig om het paneel te verstevigen. • Regelmatig onderhoud is niet vereist.
4
Thermo Dynamic systemen in gebruik. Heet (tap)water In klein en groot volume Zwembaden
5
Heet (tap)water Het Thermo Dynamic systeem voorziet ieder huis van heet (tap)water tot wel 55ºC, dag en nacht ongeacht het weertype. Momenteel is er geen betere techniek beschikbaar dan dit. De panelen kunnen tot 80% gas besparen t.o.v. een reguliere CV. Het Thermo Dynamic systeem is ontwikkeld om, zowel in de zomer als winter, uw huis te verwarmen. Zolang de buitentemperatuur boven de 0ºC blijft werkt het systeem optimaal. Voor huiselijk gebruik worden boilers van 200 liter tot 500 liter aanbevolen. De meest gebruikte boiler heeft een inhoud van 250 liter. Thermo Dynamic systemen zijn in iedere woning te installeren. Uw installateur kan hier meer over vertellen.
Ons Thermo Dynamic systeem kan eenvoudig op uw huidige CVinstallatie worden geïnstalleerd.
6
Heet (tap)water Vergelijking van de type boilers Model
Energie Paneel Vol. in L. Diameter Hoogte Verbruik Watt. COP-waarde
TD 200cv
1
200
584
1.230
390 - 520
1.690 - 2.510
TD 250v*
1
250
584
1.500
390 - 520
1.690 - 2.510
TD 300v
1
300
680
1.600
390 - 520
1.690 - 2.510
(*) Op verzoek kan er een extra warmtewisselaar worden geïnstalleerd wanneer het systeem op uw reguliere cv installatie wordt aangesloten.
Eigenschappen: • Koudemiddel R134A of R407C • Compressor • Warmtewisselaar • Energieverbruik van 390 - 520 Watt • Anti-legionella functie
7
Heet (tap)water voor groot volume Het Thermo Dynamic systeem is in staat om water in ieder volume te verwarmen.
Ons systeem heeft in Spanje al bewezen dat dit de meest efficiënte en kostenbewuste manier is om zowel woningbouworganisaties, overheden en particulieren van heet (tap)water te voorzien.
Dankzij de hoge warmteopbrengst van dit unieke systeem kunnen veiligheid en comfort worden gegarandeerd.
Groot volume boilers Boiler
Panelen
Energieverbruik in Watt.
Volume (L.) Hoogte mmDiameter mm
COP-waarde in Watt.
TD 800-A
4
800
1.840
950
960 - 1.800
3.600 - 7.290
TD 1000-A
4-6-8
1.000
2.250
950
960 - 1.800
3.600 - 7.290
TD 1500-A
6 - 8 - 12
1.500
1.830
1.360
1.230 - 2.220
4.900 - 9.680
TD2000-B
8 - 12 - 16
2.000
2.280
1.360
1.440 - 2.625
5.500 - 11.240
TD 3000-B
16 - 24 - 32
3.000
2.305
1.660
3.210 - 5.156
14.190 - 24.200
TD 4000-B
24 - 32 - 40
4.000
2.310
1.910
4.140 - 6.025
16.495 - 31.430
Grotere boilers zijn beschikbaar op aanvraag. Vanaf 800 liter tot 6000 liter.
Eigenschappen: • Boiler A: één warmtewisselaar • Boiler B: twee warmtewisselaars
8
Opbrengst bij groot volume Model
Panelen
Energieverbruik in Watt.
Volume (L.)
COP-waarde in Watt.
TD 4 ACS
4
800 / 1.000
960 - 1.800
3.600 - 7.290
TD 6 ACS
6
1.000 / 1.500
1.230 - 2.220
4.900 - 9.680
TD 8 ACS
8
1.000 / 1.500 / 2.000
1.440 - 2.625
5.500 - 11.240
TD 12 ACS
12
1.500 / 2.000
2.010 - 3.120
9.215 - 16.580
TD 16 ACS
16
2.000 / 3.000
3.210 - 5.156
14.190 - 24.200
TD 24 ACS
24
3.000 / 4.000
4.140 - 6.025
16.495 - 31.430
TD 32 ACS
32
4.000 / 5.000
5.690 - 8.300
24.090 - 42.600
TD 40 ACS
40
5.000 / 6.000
7.100 - 10.150
32.540 - 52.970
Bevestigingsmateriaal kan op aanvraag worden geleverd.
Eigenschappen: • Koudemiddel R134A of R407C • COPELAND Compressor • Warmtewisselaar • Energieverbruik van 960-10.150 Watt
Gemiddelde duur dat het verwarmingsproces in beslag neemt TD 1000-A
TD 4 = 11 uur
TD 6 = 8 uur
TD 8 = 6 uur
TD 1500-A
TD 6 = 11 uur
TD 8 = 9 uur
TD 12 = 7 uur
TD 2000-B
TD 8 = 11 uur
TD 12 = 9 uur
TD 16 = 6 uur
TD 3000-B
TD 16 = 9 uur
TD 24 = 7 uur
TD 32 = 5 uur
TD 4000-B
TD 24 = 10 uur
TD 32 = 7 uur
TD 40 = 5 uur
9
Thermo Dynamic systeem 2m
0,8 m
tot wel
55°C
Heet (tap)water
Terugkerend gas
Koudelmiddel
Gewicht: 8kg.
220 V.
Koud water
Drukklep
Veiligheidspal
Expansievat
Koudemiddel R134A Terugkerend gas Koud water Heet water
10
Heet (tap)water voor groot volume tot wel
55°C
Heet (tap)water
T Thermostaat
Koudemiddel
Gas
Terugkerend gas
Koudemiddel
Warmtewisselaar
Koud water toevoer
220 V.
Tot 12 panelen
380 V.
Van 4 tot 40 panelen
Koudemiddel 407C Terugkerend gas Gas 407C
11
Heet (tap)water voor (groot) volume met een backup
Heet (tap)water
Boiler
T
Heet water
Thermostaat
Koud water
T
Warmtewisselaar
Koudemiddel
Gas
Terugkerend gas
Koudemiddel
Thermostaat
Koud watertoevoer
220 V.
Tot 12 panelen
380 V.
Van 4 tot 40 panelen
Koudemiddel 407C Terugkerend gas Gas 407C Koud water Heet water
12
Opbrengst
Terugverdienen U kunt uw investering in korte tijd terugverdienen. Thermo Dynamica biedt u de mogelijkheid om uw water goedkoop te verwarmen tot 55ºC.
Model
Panelen
EnergieOppervlakte (Max.) verbruik in Watt COP-waarde
TD 4C
4
60 m2
960 - 1.800
3.600 - 7.290
Commerciële inzet van ons systeem heeft het energieverbruik van McDonalds in Spanje al verlaagd. Zij zijn erg onder de indruk van het systeem en willen het bij alle filialen installeren. Ook hotelgroep Hilton maakt gebruik van Thermo dynamic systemen.
TD 6C
6
80 m2
1.230 - 2.220
4.900 - 9.680
TD 8C
8
110 m2
1.440 - 2.625
5.500 - 11.240
TD 12C
12
120 m2
2.010 - 3.120
9.215 - 16.580
TD 16C
16
190 m2
3.210 - 5.156
14.190 - 24.200
TD 24C
24
260 m2
4.140 - 6.025
16.495 - 31.430
TD 32C
32
350 m2
5.690 - 8.300
24.090 - 42.600
Ons systeem is eenvoudig in ieder huis te installeren.
TD 40C
40
420 m2
7.100 - 10.150
32.540 - 52.970
radiatoren, Lage temperaturen (tap)watersystemen en vloerverwarming werken optimaal met ons Thermo Dynamic systeem. Bij een gemiddeld gezin kan er tot €320,- aan gaskosten worden bespaard.
Bevestigingsmateriaal kan op aanvraag worden geleverd.
Eigenschappen: • Koudemiddel R134A of 407C • COPELAND Compressor • Warmtewisselaar • Energieverbruik: 960-10.150 Watt
13
Lage temperaturen radiatoren met het Thermo Dynamic systeem en een backup Ontluchtingsklep
- Vloerverwarming - Lage temperaturen radiatoren
Thermostaat
T
Heet (tap)water
T- verbinding
T
Terugkerend gas
Thermostaat
Expansievat
Heet water
Koudemiddel
Tank met dubbele kamer
Waterpomp
Koud water toevoer
Koud water
T-verbinding
220 V.
Tot 12 panelen
Boiler
380 V.
Van 4 tot 40 panelen
Koudemiddel 407C Terugkerend gas Koud water Heet water
14
Binnenbadverwarming ADG Dynamics biedt u de mogelijkheid om uw binnenbad het hele jaar van warm water te voorzien, in ieder seizoen, met minimaal energieverbruik. Ongeacht het volume, onze Thermo Dynamic systemen maken het mogelijk om, dankzij deze innovatie, uw energieverbruik te verminderen. Daarbij is ons systeem betrouwbaar en werkt het voor u kostenverlagend.
Opbrengst Model
Panelen
Titanium Buiten warmtewisselaar (Max.)
Binnen (Max.)
Energieverbruik COP-waarde in Watt in Watt
TD 4P
4
1 x 100-40
25 m3
30 m3
960 - 1.800
3.600 - 7.290
TD 6P
6
2 x 100-40
30 m3
50 m3
1.230 - 2.220
4.900 - 9.680
TD 8P
8
2 x 100-40
40 m3
65 m3
1.440 - 2.625
5.500 - 11.240
TD 12P
12
2 x 100-70
60 m3
100 m3
2.010 - 3.120
9.215 - 16.580
TD 16P
16
2 x 100-70
80 m3
130 m3
3.210 - 5.156
14.190 - 24.200
TD 24P
24
2 x 100-104
100 m3
160 m3
4.140 - 6.025
16.495 - 31.430
TD 32P
32
2 x 100-104
140 m3
220 m3
5.690 - 8.300
24.090 - 42.600
TD 40P
40
2 x 100-104
180 m3
300 m3
7.100 - 10.150
32.540 - 52.970
15
Eigenschappen: • Koudemiddel R134A of R407C • COPELAND Compressor • Titanium warmtewisselaar • Energieverbruik: 960-10.150 Watt Bevestigingsmateriaal kan op aanvraag worden geleverd.
Aandachtspunten: • Binnenbaden moeten individueel worden beoordeeld. • Binnenbaden moeten een omgevingstemperatuur hebben die +2ºC meer is dan de water temperatuur. • Het plaatsen van een ontvochtiger of een airconditioning wordt aanbevolen. • Een isolerende kap vermijdt warmteverlies. • De minimale omgevingstemperatuur moet 18ºC zijn, maximale effienciency kan hierdoor worden gegarandeerd.
16
Vloerverwarming, lage temperaturen radiatoren met een Thermo Dynamic systeem en een binnenbad Ontluchtingsklep
Thermostaat
T
T
Zwembad
2
Thermostaat - Vloerverwarming
Titanium warmtewisselaars
Filter
- Lage temperaturen radiatoren
Voor-filter
T-verbinding
Heet (tap)water T-verbinding
T
Terugkerend gas
Thermostaat
Expansievat
Heet water
Koudemiddel
Tank met dubbele kamer
Koud water toevoer
Koud water
Waterpomp
220 V.
Tot 12 panelen
380 V.
Van 4 tot 40 panelen
Koudemiddel 407C Terugkerend gas Koud water Heet water
17
Binnenbad met elektroventielen en het Thermo Dynamic systeem Ontvochtiger
Zwembad
M
Titanium Warmtewisselaars
Elektroventiel
M
Filter
T
Thermostaat
Voor-filter
Koud water
Heet water
Terugkerend gas
Koudemiddel
T
Waterpomp Expansievat
220 V.
Tot 12 panelen
380 V.
Van 4 tot 40 panelen
Koudemiddel 407C Terugkerend gas Koud water Heet water
18
Technische specificaties Systemen Componenten Van 4 to 40 panelen
19
Thermo Dynamic systemen voor heet (tap)water
Systeem
180iP / 280i
250v / 300v
Units
Energie Thermische energie Energieverbruik Backup-element
1.690 - 2.510 390 - 520 1.200
W W W
Compressor Type Geluidsniveau
Luchtdicht type 39
dB
Thermo dynamic paneel Materiaal Nummer Afmetingen Maximale druk Druk test Max. temp. Min. temp. Min. omgevingstemp.
Geanodiseerd aluminium 01 2.000 x 800 x 20 12 / 1,20 15 / 1,50 120 -5 -40
mm bar / MPa bar / MPa ºC ºC ºC
Opslag element Materiaal Isolatie Maximale druk Test druk Max. temp. Beveiliging
Stainless Steel (304L) Enamelled Polyurethane 6 / 0,6 10 / 1,0 90 MagnesiumAnode
bar / MPa bar / MPa ºC
Koudemiddel Type Hoeveelheid
R134 A 550
gr
Buizen Type Waterleiding Vloeistofleiding
Dehydrated Copper Pipes and Joints 1/4’’ 3/8’’ 10
Automatisch display
JA
Max. afstand tussen het paneel en het Thermo dynamic block.
Voltage Zekering compressor Algemene zekering
230V, 50Hz 6,3 T 6,3 F
20
inch inch m
V/Hz A A
Systemen van 4 to 40 panelen Modellen: TD 4 ACS (Groot Vol.), TD 4 C (CV) en TD 4 P (Zwembad) TECHNICAL FEATURES
DESCRIPTION
Thermo Dynamic Eigenschappen
H = 800 mm, A = 2000 mm, P = 20 mm, weight 8 kg approx. 30 micron anodized aluminium, molded-in roll-bond refrigeration circuit
Nr. of collectors
04, total weight = 32 kg
Exposed collecting surface
6,4 m2
Thermo Dynamic block RVS case
H = 940 mm, A = 555 mm, P = 550 mm, weight 99 kg
Input power
Triphasic model 400 V or monophasic model 230 V, 50 Hz
COPELAND compressor , Scroll* type
Electric power 0,9 - 1,8 kW - Caloric power 3,6 - 7,3 kW
Noise emission 1 m. from the thermodynamical block
50-65 dBA
Type koudemiddel
407 C, system load = 1,5 kg (Approximately**)
Vloeistofleiding
Dehydrated copper, Ø 1/2”
Gasleiding
Dehydrated copper, Ø 5/8”
Expansievat
Danfoss
Pressure controllers, HP and LP
Ja, HP = 2,5 MPa max., LP = 0,2 MPa min.
Digital display SY250
Version 6.0
RVS warmtewisselaar
Model TD 4 C, volume min. 0,5 m3/h., p.c. m.c.a. = 2,5 m
Titanium warmtewisselaar
Model TD 4 P, een warmtewisselaar model 100-40
Warmtewisselaars
Models TD 4 ACS, een warmtewisselaar model WRK 18
Waterpomp
Nee
OTHER FEATURES: Dehydrating filter, oil separator, fluid container, liquid viewer, motor protector switch, phase detector (only for three-phase installations), general circuit breaker, electrical connections.
Ambient temperature (ºC)
EFFICIENCY CURVES
0
5
10
15
20
8
Caloric power (kW)
7 6 5 4 3 2
day night
1
* The electric power corresponds to the electric consumption depending on the water temperature, from 30 to 50°C, and the caloric power generated corresponds to the solar radiation quantity on the panel. ** The gas charges must be suitable for each installation.
21
Modellen: TD 6 ACS (Groot Vol.), TD 6 C (CV) en TD 6 P (Zwembad) TECHNICAL FEATURES
DESCRIPTION
Thermo Dynamic Eigenschappen
H = 800 mm, A = 2000 mm, P = 20 mm, weight 8 kg approx. 30 micron anodized aluminium, molded-in roll-bond refrigeration circuit
Nr. of collectors
06, total weight = 48 kg
Exposed collecting surface
9,6 m2
Thermo Dynamic block RVS case
H = 940 mm, A = 555 mm, P = 550 mm, weight 103 kg
Input power
Triphasic model 400 V or monophasic model 230 V, 50 Hz
COPELAND compressor, Scroll* type
Electric power 1,2 - 2,2 kW - Caloric power 4,9 - 9,7 kW
Noise emission 1 m. from the thermodynamical block
50-65 dBA
Type koudemiddel
407 C, system load = 1,6 kg (Approximately**)
Vloeistofleiding
Dehydrated copper, Ø 1/2”
Gasleiding
Dehydrated copper, Ø 5/8”
Expansievat
Danfoss
Pressure controllers, HP and LP
Ja, HP = 2,5 MPa max., LP = 0,2 MPa min.
Digital display SY250
Version 6.0
RVS warmtewisselaar
Model TD 6 C, volume min. 0,7 m3/h., p.c. m.c.a. = 2,5 m
Titanium warmtewisselaar
Model TD 6 P, twee warmtewisselaars model 100-40
Warmtewisselaars
Models TD 6 ACS, een warmtewisselaars model WRK 18
Waterpomp
Nee
OTHER FEATURES: Dehydrating filter, oil separator, fluid container, liquid viewer, motor protector switch, phase detector (only for three-phase installations), general circuit breaker, electrical connections.
Ambient temperature (ºC)
EFFICIENCY CURVES
0
5
10
15
20
12
Caloric power (kW)
10,5 9 7,5 6 4,5 3
day night
1,5
* The electric power corresponds to the electric consumption depending on the water temperature, from 30 to 50°C, and the caloric power generated corresponds to the solar radiation quantity on the panel. ** The gas charges must be suitable for each installation.
22
Modellen: TD 8 ACS (Groot Vol.), TD 8 C (CV) en TD 8 P (Zwembad) TECHNICAL FEATURES
DESCRIPTION
Thermo Dynamic Eigenschappen
H = 800 mm, A = 2000 mm, P = 20 mm, weight 8 kg approx. 30 micron anodized aluminium, molded-in roll-bond refrigeration circuit
Nr. of collectors
08, total weight = 64 kg
Exposed collecting surface
12,8 m2
Thermo Dynamic block RVS case
H = 940 mm, A = 555 mm, P = 550 mm, weight 104 kg
Input power
Triphasic model 400 V or monophasic model 230 V, 50 Hz
COPELAND compressor, Scroll* type
Electric power 1,4 - 2,6 kW - Caloric power 5,5 - 11,3 kW
Noise emission 1 m. from the thermodynamical block
50-65 dBA
Type koudemiddel
407 C, system load = 1,8 kg (Approximately**)
Vloeistofleiding
Dehydrated copper, Ø 1/2”
Gas leiding
Dehydrated copper, Ø 3/4”
Expansievat
Danfoss
Pressure controllers, HP and LP
Ja, HP = 2,5 MPa max., LP = 0,2 MPa min.
Digital display SY250
Version 6.0
RVS warmtewisselaar
Model TD 8 C, volume min. 0,8 m3/h., p.c. m.c.a. = 2,7 m
Titanium warmtewisselaar
Model TD 8 P, twee warmtewisselaars model 100-40
Warmtewisselaars
Models TD 8 ACS, een warmtewisselaar model WRK 18
Waterpomp
Nee
OTHER FEATURES: Dehydrating filter, oil separator, fluid container, liquid viewer, motor protector switch, phase detector (only for three-phase installations), general circuit breaker, electrical connections.
Ambient temperature (ºC)
EFFICIENCY CURVES
0
5
10
15
20
16
Caloric power (kW)
14 12 10 8 6 4
day night
2
* The electric power corresponds to the electric consumption depending on the water temperature, from 30 to 50°C, and the caloric power generated corresponds to the solar radiation quantity on the panel. ** The gas charges must be suitable for each installation.
23
Modellen: TD 12 ACS (Groot Vol.), TD 12 C (CV) en TD 12 P (Zwembad) TECHNICAL FEATURES
DESCRIPTION
Thermo Dynamic Eigenschappen
H = 800 mm, A = 2000 mm, P = 20 mm, weight 8 kg approx. 30 micron anodized aluminium, molded-in roll-bond refrigeration circuit
Nr. of collectors
12, total weight = 96 kg
Exposed collecting surface
19,2 m2
Thermo Dynamic block RVS case
H = 940 mm, A = 555 mm, P = 550 mm, weight 115 kg
Input power
Triphasic model 400 V or monophasic model 230 V, 50 Hz
COPELAND compressor, Scroll* type
Electric power 1,9 - 3,1 kW - Caloric power 9,2 - 16,7 kW
Noise emission 1 m. from the thermodynamical block
50-65 dBA
Type koudemiddel
407 C, system load = 2,0 kg (Approximately**)
Vloeistofleiding
Dehydrated copper, Ø 1/2”
Gasleiding
Dehydrated copper, Ø 7/8”
Expansievat
Danfoss
Pressure controllers, HP and LP
Ja, HP = 2,5 MPa max., LP = 0,2 MPa min.
Digital display SY250
Version 6.0
RVS warmtewisselaar
Model TD 12 C, volume min. 1,0 m3/h., p.c. m.c.a. = 3,0 m
Titanium warmtewisselaar
Model TD 12 P, twee warmtewisselaars model 100-70
Warmtewisselaars
Models TD 12 ACS, een warmtewisselaar model WRK 23
Waterpomp
Nee
OTHER FEATURES: Dehydrating filter, oil separator, fluid container, liquid viewer, motor protector switch, phase detector (only for three-phase installations), general circuit breaker, electrical connections.
Ambient temperature (ºC)
EFFICIENCY CURVES
0
5
10
15
20
18
Caloric power (kW)
16 14 12 10 8 6
day night
4
* The electric power corresponds to the electric consumption depending on the water temperature, from 30 to 50°C, and the caloric power generated corresponds to the solar radiation quantity on the panel. ** The gas charges must be suitable for each installation.
24
Modellen: TD 16 ACS (Groot Vol.), TD 16 C (CV) enTD 16 P (Zwembad) TECHNICAL FEATURES
DESCRIPTION
Thermo Dynamic Eigenschappen
H = 800 mm, A = 2000 mm, P = 20 mm, weight 8 kg approx. 30 micron anodized aluminium, molded-in roll-bond refrigeration circuit
Nr. of collectors
16, total weight = 128 kg
Exposed collecting surface
26,6 m2
Thermo Dynamic block RVS case
H = 940 mm, A = 555 mm, P = 550 mm, weight 120 kg Triphasic
Input power
model 400 V, 50 Hz
COPELAND compressor, Scroll* type
Electric power 3,2 - 5,2 kW - Caloric power 14,2 - 24,2 kW 50-65
Noise emission 1 m. from the thermodynamical block
dBA
Type koudemiddel
407 C, system load = 2,8 kg (Approximately**)
Vloeistofleiding
Dehydrated copper, Ø 3/4”
Gasleiding
Dehydrated copper, Ø 7/8”
Expansievat
Danfoss
Pressure controllers, HP and LP
Ja, HP = 2,5 MPa max., LP = 0,2 MPa min.
Digital display SY250
Version 6.0
RVS warmtewisselaar
Model TD 16 C, volume min. 1,5 m3/h., p.c. m.c.a. = 3,5 m
Titanium warmtewisselaar
Model TD 16 P, twee warmtewisselaars model 100-70
Warmtewisselaars
Models TD 16 ACS, twee warmtewisselaars model WRK 23
Waterpomp
Nee
OTHER FEATURES: Dehydrating filter, oil separator, fluid container, liquid viewer, motor protector switch, phase detector (only for three-phase installations), general circuit breaker, electrical connections.
Ambient temperature (ºC)
EFFICIENCY CURVES
0
5
10
15
20
32
Caloric power (kW)
28 24 20 16 12 8
day night
4
* The electric power corresponds to the electric consumption depending on the water temperature, from 30 to 50°C, and the caloric power generated corresponds to the solar radiation quantity on the panel. ** The gas charges must be suitable for each installation.
25
Modellen: TD 24 ACS (Groot Vol.), TD 24 C (CV) en TD 24 P (Zwembad) TECHNICAL FEATURES
DESCRIPTION
Thermo Dynamic Eigenschappen
H = 800 mm, A = 2000 mm, P = 20 mm, weight 8 kg approx. 30 micron anodized aluminium, molded-in roll-bond refrigeration circuit
Nr. of collectors
24, total weight = 192 kg
Exposed collecting surface
38,4 m2
Thermo Dynamic block RVS case
H = 940 mm, A = 655 mm, P = 640 mm, weight 190 kg
Input power
Triphasic model 400 V, 50 Hz
COPELAND compressor, Scroll* type
Electric power 4,2 - 6,0 kW - Caloric power 16,5 - 31,5 kW
Noise emission 1 m. from the thermodynamical block
50-65 dBA
Type koudemiddel
407 C, system load = 3,0 kg (Approximately**)
Vloeistofleiding
Dehydrated copper, Ø 3/4”
Gasleiding
Dehydrated copper, Ø 1 1/8”
Expansievat
Danfoss
Pressure controllers, HP and LP
Ja, HP = 2,5 MPa max., LP = 0,2 MPa min.
Digital display SY250
Version 6.0
RVS warmtewisselaar
Model TD 24 C, volume min. 2,8 m3/h., p.c. m.c.a. = 5 m
Titanium warmtewisselaar
Model TD 24 P, twee warmtewisselaars model 100-104
Warmtewisselaars
Models TD 24 ACS, twee warmtewisselaars model WRK 23
Waterpomp
Nee
OTHER FEATURES: Dehydrating filter, oil separator, fluid container, liquid viewer, motor protector switch, phase detector (only for three-phase installations), general circuit breaker, electrical connections.
Ambient temperature (ºC)
EFFICIENCY CURVES
0
5
10
15
20
32
Caloric power (kW)
28 24 20 16 12 8
day night
4
* The electric power corresponds to the electric consumption depending on the water temperature, from 30 to 50°C, and the caloric power generated corresponds to the solar radiation quantity on the panel. ** The gas charges must be suitable for each installation.
26
Modellen: TD 32 ACS (Groot Vol.), TD 32 C (CV) en TD 32 P (Zwembad) TECHNICAL FEATURES
DESCRIPTION
Thermo Dynamic Eigenschappen
H = 800 mm, A = 2000 mm, P = 20 mm, weight 8 kg approx. 30 micron anodized aluminium, molded-in roll-bond refrigeration circuit
Nr. of collectors
32, total weight = 256 kg
Exposed collecting surface
51,2 m2
Thermo Dynamic block RVS case
H = 940 mm, A = 655 mm, P = 640 mm, weight 190 kg
Input power
Triphasic model 400 V, 50 Hz
COPELAND compressor, Scroll* type
Electric power 5,7 - 8,3 kW - Caloric power 24,0 - 42,6 kW
Noise emission 1 m. from the thermodynamical block
50-65 dBA
Type koudemiddel
407 C, system load = 3,5 kg (Approximately**)
Vloeistofleiding
Dehydrated copper, Ø 7/8”
Gasleiding
Dehydrated copper, Ø 1 1/8”
Expansievat
Danfoss
Pressure controllers, HP and LP
Ja, HP = 2,5 MPa max., LP = 0,2 MPa min.
Digital display SY250
Version 6.0
RVS warmtewisselaar
Model TD 32 C, volume min. 4,0 m3/h., p.c. m.c.a. = 6 m
Titanium warmtewisselaar
Model TD 32 P, twee warmtewisselaars model 100-104
Warmtewisselaars
Models TD 32 ACS, twee warmtewisselaars model WRK 23
Waterpomp
Nee
OTHER FEATURES: Dehydrating filter, oil separator, fluid container, liquid viewer, motor protector switch, phase detector (only for three-phase installations), general circuit breaker, electrical connections.
Ambient temperature (ºC)
EFFICIENCY CURVES
0
5
10
15
20
48
Caloric power (kW)
42 36 30 24 18 12
day night
6
* The electric power corresponds to the electric consumption depending on the water temperature, from 30 to 50°C, and the caloric power generated corresponds to the solar radiation quantity on the panel. ** The gas charges must be suitable for each installation.
27
Modellen: TD 40 ACS (Groot Vol.), TD 40 C (CV) en TD 40 P (Zwembad) TECHNICAL FEATURES
DESCRIPTION
Thermo Dynamic Eigenschappen
H = 800 mm, A = 2000 mm, P = 20 mm, weight 8 kg approx. 30 micron anodized aluminium, molded-in roll-bond refrigeration circuit
Nr. of collectors
40, total weight = 320 kg
Exposed collecting surface
64,0 m2
Thermo Dynamic block RVS case
H = 940 mm, A = 655 mm, P = 640 mm, weight 192 kg
Input power
Triphasic model 400 V, 50 Hz
COPELAND compressor, Scroll* type
Electric power 7,1 - 10,1 kW - Caloric power 32,5 - 53,1 kW
Noise emission 1 m. from the thermo dynamic block
50-65 dBA
Type koudemiddel
407 C, system load = 5,5 kg (Approximately**)
Vloeistofleiding
Dehydrated copper, Ø 7/8”
Gasleiding
Dehydrated copper, Ø 1 3/8”
Expansievat
Danfoss
Pressure controllers, HP and LP
Ja, HP = 2,5 MPa max., LP = 0,2 MPa min.
Digital display SY250
Version 6.0
RVS warmtewisselaar
Model TD 40 C, volume min. 5,0 m3/h., p.c. m.c.a. = 6 m
Titanium warmtewisselaar
Model TD 40 P, twee warmtewisselaars model 100-104
Warmtewisselaars
Models TD 40 ACS, twee warmtewisselaars model WRK 23
Waterpomp
Nee
OTHER FEATURES: Dehydrating filter, oil separator, fluid container, liquid viewer, motor protector switch, phase detector (only for three-phase installations), general circuit breaker, electrical connections.
Ambient temperature (ºC)
EFFICIENCY CURVES
0
5
10
15
20
56
Caloric power (kW)
49 42 35 28 21 14
day night
7
* The electric power corresponds to the electric consumption depending on the water temperature, from 30 to 50°C, and the caloric power generated corresponds to the solar radiation quantity on the panel. ** The gas charges must be suitable for each installation.
28
Installatieaccessoires Bevestigingsmateriaal Panelenopstelling
29
Beugels, houders, profiel en ander bevestigingsmateriaal, voor cv, grote en kleine Thermo Dynamic systemen en zwembaden, kunnen op aanvraag worden geleverd. Wanneer het Thermo Dynamic paneel een ander paneel vervangt, is het van belang om de juist positie van het paneel door te geven. Het installeren van de panelen vergt uiterste precisie en specifieke kennis. F-gassen certificering is vereist bij installatie.
Verticale muurprofiel(0º)
SHORT BRACKET
GALVANIZED STEEL
SIDE VIEW SCALE
LONG BRACKET
SCALE
Dakprofiel (30º)
SIDE VIEW
SCALE
GALVANIZED STEEL
LONG BRACKET
GALVANIZED STEEL
SHORT BRACKET
SCALE
30
Dakprofiel (45º)
SIDE VIEW
SCALE
GALVANIZED STEEL
GALVANIZED STEEL
SHORT BRACKET LONG BRACKET
SCALE
Dakprofiel (60º)
SIDE VIEW SCALE
GALVANIZED STEEL
GALVANIZED STEEL
SHORT BRACKET
LONG BRACKET
31
SCALE
Ondersteunende frames voor de panelen
SCALE
32
Paneelopstelling 0º
..
Voor een optimale werking dienen de Thermo Dynamic panelen volgens de getoonde voorbeelden te worden geïnstalleerd. 60º
Inclinación panel 30º
45º
4 A B
Inclinación panel 0º
30º
45º
60º
TD 6 A
B
Inclinación panel
C
0º
30º
45º
60º
TD 8 A
B C
Inclinación panel 0º
30º
45º
TD 12 C A
B
D
33
60º
Inclinación panel
TD 16
0º
30º
45º
60º
C A
B
Inclinación panel
TD 24
0º
30º
45º
60º
B C A
D
E
F
34
Inclinación panel 0º
30º
45º
60º
TD 32
B
A
C
D x3 Inclinación panel
TD 40
0º
30º
45º
60º
C B
A
D
E
F x3
35
Garantie
36
Garantie
By this warranty, ADG Dynamics v.o.f., hereafter ADG Dynamics, with registered office at the Emmalaan 17, 1862 ER te Bergen, guarantees that the product specifically mentioned later is free from defects in materials and workmanship from the date of its purchase by the buyer from the retailer, or at most upon its delivery, regardless of its final date of installation and/or start-up, and for the period below mentioned per item.
The periods stated below shall begin on the date of purchase, or at most upon the delivery of the goods, regardless of the date of installation or start-up.
This warranty is valid against any manufacturing defects. It excludes any payment of damages to persons, or for direct and indirect damages to elements and/or materials. This warranty is valid only accompanied by the original purchase receipt given to the buyer, and filled in due form, including date of purchase with the following items:
c) Thermo Dynamic Blocks: 2-year warranty
a) Solar Collectors: 5-year warranty b) Tanks: 2-year warranty
This warranty specifically excludes: • Periodic inspections, maintenance and repair or
a) Full name of the Buyer
replacement of parts damaged as a result of normal wear and tear.
b) Name, Signature and Seal of the Retailer
• Consumable items, or subject to wear and tear, (switches, resistances, thermostats, timers, etcetera).
c) Product Model and Serial No. • Travel charges, labor costs and carriage costs for d) Date of Purchase
parts.
ADG Dynamics reserves the right to deny warranty coverage if this information has been cancelled or modified after the original purchase date of the product.
•
If, however, during the warranty period the product should manifest any defects in material and/or workmanship, the buyer must inform ADG Dynamics within one month following the noticing of the defect, to claim the repair or replacement of the corresponding part or element. ADG Dynamics official technicians shall assess the damage and repair the product according to the technical coverage available at that moment, in the area where the product is installed or at the facilities indicated by ADG Dynamics. In the event that after repeated attempts it is impossible to restore the element into working order, ADG Dynamics shall replace it for an equivalent one. This warranty covers the replacement of the elements damaged during the coverage period. The replacement of any element during the framework of warranty does not extend its duration, and the replaced elements shall become the property of ADG Dynamics. Regarding the Warranty parts return, these must be returned in the same conditions as they were shipped, original or similar packaging. The compressors’ valves must have their original copper caps on.
Thermoaccumulators
which
work
with
water
containing active chlorine, + - 0´2 p.p.m., and Ph + - 6, (Sorensen scale at 25º). • Installing and/or configuring the product according to requirements different from the ones specific of the product, (or the ones established by ADG Dynamics official service), or not compliant with the current technical or security standards. • Manipulation or repair attempts by non-authorized technical service providers. • Failures or damage caused to the product due to: Electric discharges, Flooding, Hail, Dampness, Impacts, Misuse of the Equipment, Galvanic Coupling, Corrosion due to Fixing with Iron Screws or Non-Stainless Steel Holders, Badly Fixed Collectors, Fracture of the Collectors Capillary Tube due to Vibrations, Acts of God such as Accidents, Natural Disasters, Unpredictable Weather Phenomena or Any Other Cause Beyond ADG Dynamics Control. The manipulation or repair attempts by technical service providers not authorized by ADG Dynamics may extinguish the rights granted by this Warranty.