Version 3.1 2010/05/18
SPECIFICATION FOR ALDER LED MODEL:AS-D75xxyy-C2LZ-H1-E
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
1 / 13
Version 3.1 2010/05/18 ■
■
Absolute Maximum Ratings (Ta = 25°C) Parameter
Symbol
Absolute maximum Rating
Unit
Peak Forward Current
IFP
500
mA
Forward Current(DC)
IF
350
mA
Operation Temperature range
Topr
-40 ~ + 100
°C
Storage Temperature range
Tstg
-40 ~ + 100
°C
Junction Temperature
Tj
125
°C
ESD Sensitivity
VB
2000
V
Reflow Soldering Temperature
Tsol
260°C for 5 seconds
°C
Flux Characteristics ( Ta = 25°C) Luminous Flux @ If=350mA (lm)
■
■
Model No.
Color
Min.
Typ.
Max.
AS-D75SRyy-C2LZ-H1-E
Red
---
39
---
AS-D75PGyy-C2LZ-H1-E
Green
---
60
---
AS-D75SByy-C2LZ-H1-E
Blue
---
13
---
AS-D75AMyy-C2LZ-H1-E
Amber
---
39
---
AS-D75WCyy-C2LZ-H1-E
Cool White
---
70
---
AS-D75WWyy-C2LZ-H1-E
Warm White
---
39
---
Electrical/Optical Characteristics Model No.
Color
AS-D75SRyy-C2LZ-H1-E
Vf @ If=350mA(for each chip)
Wavelength (λd)
Min
Typ.
Max
Typ.(nm)
Red
---
2.5
3.0
625
AS-D75PGyy-C2LZ-H1-E
Green
---
3.4
4.0
520
AS-D75SByy-C2LZ-H1-E
Blue
---
3.6
4.0
465
AS-D75AMyy-C2LZ-H1-E
Amber
---
2.5
3.0
590
AS-D75WCyy-C2LZ-H1-E
Cool White
---
3.6
4.0
6000K
AS-D75WWyy-C2LZ-H1-E
Warm White
---
3.6
4.0
3200K
Emission Angle Characteristics Model No.
Color
2θ½
Unit
L ,LS type
EL type
Batwing
Fousing
AS-D75SRyy-C2LZ-H1-E
Red
130
140
110
70
AS-D75PGyy-C2LZ-H1-E
Green
140
150
100
65
AS-D75SByy-C2LZ-H1-E
Blue
140
150
100
65
AS-D75AMyy-C2LZ-H1-E
Amber
130
140
110
70
AS-D75WCyy-C2LZ-H1-E
Cool White
120
130
120
80
AS-D75WWyy-C2LZ-H1-E
Warm White
120
130
120
80
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
Deg
2 / 13
Version 3.1 2010/05/18 ■
Typical Electrical/ Optical Characteristics Curves (Ta=25°C Unless Otherwise Noted) Dominant Wavelength vs. Relative Intensity
Dominant Wavelength vs. Relative Intensity
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
3 / 13
Version 3.1 2010/05/18
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
4 / 13
Version 3.1 2010/05/18
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
5 / 13
Version 3.1 2010/05/18
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
6 / 13
Version 3.1 2010/05/18
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
7 / 13
Version 3.1 2010/05/18 ■
Package Dimensions
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
8 / 13
Version 3.1 2010/05/18
Notes: All dimensions are in mm with tolerance ±0.25mm unless otherwise noted.
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
9 / 13
Version 3.1 2010/05/18 ■
Packing Specifications
Packing Quantity 1. 60 Pcs / Per Tube 2. 20 Tubes / Inner Carton 3. 12 Inner Cartons / Ourside Carton
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
10 / 13
Version 3.1 2010/05/18
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
11 / 13
Version 3.1 2010/05/18 ■
Soldering heat reliability Lead-Free Solder (JEDEC J-STD-020C).
Manual Soldering. - Lead Solder Max. 300℃ for Max. 3sec, and only one time. - Lead-free Solder Max. 350℃ for Max. 3sec, and only one time. - There is a possibility that the brightness of LEDs is decreased, which is influenced by heat or ambient atmosphere during reflow. It is recommended to use the nitrogen reflow method. - After LEDs have been soldered, repairs should not be done. When repair is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repairing or not. - Reflow soldering should not be done more than two times.
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
12 / 13
Version 3.1 2010/05/18 ■
Reliability Test Items And Results No.
Test Items
Test Condition
Note
Pass
1
Life Test
If = 350 mA
168 Hr
OK
2
Soldering Test
260°C max
2 Times
OK
3
Reflow Test
260°C max
2 Times
OK
4
Thermal Shock
-40°C ~ 100°C
84 Cycles
OK
5
Temperature Cycle
-35°C ~ 75°C
168 Cycles
OK
6
High Temperature Storage
100°C
168 Hr
OK
7
Low Temperature Storage
-40°C.
168 Hr
OK
8
High Temperature / High Humidity
85°C,85%RH
168 Hr
OK
Notes: 1.
Measurement shall be taken after the tested samples have been returned to normal ambient conditions (generally after two hours);Sample Q’ty is 20 pcs.
2.
Appropriate material for coating over LED for any purpose, such as waterproof, must be tested by the customer. Incompatible material may result in color change, or even premature LED failure. Alder will not be held responsible for any such misuse.
■
Precautions For Use 1.
2.
Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change(Burn out will happen). Storage 2.1 Before opening the package, the storage condition of temperature and R.H. are:30°C, 70%R.H. Max. 2.2
The LED should be kept in a damp proof box with desiccating agent.
NEWLED s.r.o. - Dolní 7 - CZ - 76362 Tlumačov - tel +420 577 102 440 - fax +420 577 102 488 - web www.newled.cz- email
[email protected] -
13 / 13