lijmen en reinigers colles et décapants glues and cleaners
PVC LIJM COLLE PVC PVC GLUE
UNI-100 XT
Voor verlijmingen tot 16 bar. Geschikt voor diam. < 400 mm. THF vrij. Pour collages jusqu’à 16 bar. Convient aux diamètres < 400 mm. Exempt THF For solvent welding up to 16 bar. Suitable for diameters < 400 mm. Free of THF
TUBE *FLACON *FLACON *FLACON
ML
N
€/ST/PC
125 250 500 1000
30 24 12 8
8.80 10.63 18.74 29.34
* flacon met borstel / flacon avec pinceau / flacon with brush
PVC LIJM COLLE PVC PVC GLUE
UNI-100
Voor verlijmingen tot 16 bar. Geschikt voor diam. < 315 mm. Pour collages jusqu’à 16 bar. Convient aux diamètres < 315 mm. For solvent welding up to 16 bar. Suitable for diameters < 315 mm.
TUBE *FLACON *FLACON *FLACON **BLIK, BOITE, CAN **BLIK, BOITE, CAN
ML
N
€/ST/PC
125 250 500 1000 5000 1000
30 24 12 8 1 8
8.80 10.62 18.78 31.51 140.00 31.51
* flacon met borstel / flacon avec pinceau / flacon with brush ** blik zonder borstel / boîte sans pinceau / can without brush
TIXOTROPE PVC LIJM, BLAUW COLLE PVC THIXOTROPE, BLEU PVC GLUE A THIXOTROPIC, BLUE Voor het verlijmen van flexibele slangen met hard PVC. Geschikt voor o.a. zwembaden, whirlpools onder vochtige omstandigheden.
WDF-05
Pour le collage de tuyaux flexibles avec du PVC rigide. Convient notamment pour les piscines et whirlpools dans des conditions humides. For solvent cement of flexibles with PVC; Particularly suitable for the swimming pools and whirlpools in wet conditions.
*FLACON *FLACON
ML
N
€/ST/PC
250 500
12 12
10.62 18.78
* flacon met borstel / flacon avec pinceau / flacon with brush N : aantal stuks per karton / nombre de boîtes par carton / numbre of cans per carton
www.vink.be
VII - 679
lijmen en reinigers colles et décapants glues and cleaners
PVC-C LIJM COLLE PVC-C PVC-C GLUE Voor verlijmingen tot 16 bar. Geschikt voor diam. < 160 mm. Pour collages jusqu’à 16 bar. Convient aux diamètres < 160 mm. For solvent welding up to 16 bar. Suitable for diameters < 160 mm.
HT-120 FLACON
ML
N
€/ST/PC
500
12
25.66
PVC / PVC-C / ABS REINIGER EN ONTVETTER VOOR BUIZEN DECAPANT ET DEGRAISSEUR POUR TUYAUX PVC / PVC-C / ABS CLEANER AND DEGREASER FOR PVC / PVC-C / ABS PIPES
CLEANER
L/ST/PC
N
€/ST/PC
1L
6
20.31
BLIK, BOITE, CAN
PE, PP, PVDF, PB REINIGER + ONTVETTER DECAPANT ET DEGRAISSEUR POUR PE, PP, PVDF, PB CLEANER AND DEGREASER FOR PE, PP, PVDF, PB
PE CLEANER
L/ST/PC
N
€/ST/PC
1L
12
17.57
BLIK, BOITE, CAN
PE, PP, PVDF, PB REINIGINGSDOEKJE TISSUE DE NETTOYAGE POUR PE, PP, PVDF, PB CLEANSING TISSUE FOR PE, PP, PVDF, PB
PE CLEANER WIPES
DISPENSER (100 ST/PC)
N
€/ST/PC
6
22.78
PVC, PVC-C, ABS, PE, PP, PVDF, ECTFE, PB PLUISVRIJE DOEK PLUS DE LINGE POUR PVC, PVC-C, ABS, PE, PP, PVDF, PB CLEANER CLOTH FOR PVC, PVC-C, ABS, PE, PP, PVDF, PB
CLEANER CLOTH
DISPENSER 23 x 41 cm (100 ST/PC)
N
€/ST/PC
6
29.49
PE, PP, PVDF, PB REINIGINGSSPRAY SPRAY DE NETTOYAGE POUR PE, PP, PVDF, PB CLEANER SPRAY FOR PE, PP, PVDF, PB
PE CLEANER SPRAY
SPUITBUS / AEROSOL 500 ML
N
€/ST/PC
12
15.22
N : aantal stuks per karton / nombre de boîtes par carton / numbre of cans per carton
www.vink.be
VII - 680
lijmen en reinigers colles et décapants glues and cleaners
PVC LIJM COLLE PVC PVC GLUE
HCR-36
Voor verlijmingen tot 10 bar. Geschikt voor diam. < 160 mm. Voor perspassingen. Voor PVC en PVC-C (max. 60°C) leidingen met een concentratie van zwavelzuur H2SO4 > 70% zoutzuur HCl > 25% salpeterzuur HNO3 > 20% fluorwaterstofzuur HF elke concentratie Te gebruiken in combinatie met HCR-36 cleaner. Pour collages jusqu’à 10 bar. Convient aux diamètres < 160 mm. Pour des assemblages pressés. Pour tuyaux de pression en PVC et PVC-C (max. 60°C) contenant une concentration de : acide sulphurique H2SO4 > 70% acide chlorhydrique HCl > 25% acide nitrique HNO3 > 20% acide fluorhydrique HF en chaque concentration Pour être utilisé en combinaison avec le HCR-36 nettoyant. For solvent welding up to 10 bar. For pressed assemblies. For PVC and PVC-C (max. 60°C) pressure piping exposed to : sulphuric acid H2SO4 > 70% hydrochloric acid HCl > 25% nitric acid HNO3 > 20% hydrofluoric acid HF in any concentration To be used in combination with HCR-36 cleaner. L/ST/PC
N
€/ST/PC
1L
12
64.18
ML/ST/PC
N
€/ST/PC
500 ML
2
25.07
BLIK, BOITE, CAN
PVC REINIGER - VERDUNNER DECAPANT - DILUANT PVC PVC DEGREASER - THINNER
HCR-36 CLEANER
BLIK, BOITE, CAN
ABS LIJM COLLE ABS ABS GLUE
DURAPIPE ABS
G/ST/PC
€/ST/PC
BLIK, BOITE, CAN
550 G
7.76
BLIK, BOITE, CAN
1100 G
14.06
VINKAIR LIJM COLLE VINKAIR VINKAIR GLUE
VINKAIR
ML/ST/PC
N
€/ST/PC
BLIK, BOITE, CAN
250 ML
24
29.89
BLIK, BOITE, CAN
1L
24
83.81
N : aantal stuks per karton / nombre de boîtes par carton / numbre of cans per carton
www.vink.be
VII - 681
lijmen en reinigers colles et décapants glues and cleaners
DE REVOLUTIE VOOR ALLE SCHROEFDRAADVERBINDINGEN LA REVOLUTION POUR TOUS L’ETANCHEITE DES RACCORDS FILETES THE REVOLUTION FOR ALL THREADED FITTINGS
KOLMAT® fibre seal
ROL / ROULEAU / ROLL
L
N
€/ST/PC
15 M
30
6.15
UNIVERSELE AFDICHTING VOOR ALLE SCHROEFDRAADVERBINDINGEN L’ETANCHEÏTE UNIVERSELLE POUR TOUS RACCORDS FILETES UNIVERSAL SEALING FOR ALL THREADED FITTINGS
FLON 100
DISPENSOR
L
N
€/ST/PC
175 M
12
24.19
AFDICHTENDE EN BESCHERMENDE COATINGS REVETEMENTS ETANCHES ET PROTECTEURS WATERPROOF COATINGS AND PROTECTORS
HBS-200
ML
N
€/ST/PC
BLIK, BOITE, CAN
1L
6
52.80
BLIK, BOITE, CAN
5L
1
213.83
BLIK, BOITE, CAN
16 L
1
648.61
DRAADZAAG VOOR PVC / PVC-C / PP EN PE BUIZEN SCIE A FIL POUR TUYAUX EN PVC / PVC-C / PP ET PE SAW WIRE FOR PIPES IN PVC / PVC-C / PP AND PE
DRAADZAAG / SCIE A FIL / SAW WIRE
N
€/ST/PC
6
22.40
AANSCHUINER VOOR PVC / PVC-C / ABS / PP EN PE BUIZEN CHANFREINEUR POUR TUYAUX EN PVC / PVC-C / ABS / PP ET PE CHAMFERING TOOL FOR PVC / PVC-C / ABS / PP AND PE PIPES
AANSCHUINER / CHANFREINEUR / CHAMFERING
N
€/ST/PC
6
146.31
N : aantal stuks per karton / nombre de boîtes par carton / numbre of cans per carton
www.vink.be
VII - 682
beugels colliers de fixation mounting clips
PP BUISKLEMMEN COLLIERS DE FIXATION EN PP PP PIPE CLIPS RAL 7037
GOEMA
DE
a
b
h
I
c
€/ST/PC
16 20 25 32 40 50 63 75 90 110 125 140 160 180
26 33 41 49 58 68 83 96 113 139 158 177 210 237
13 14 14 15 16 17 18 19 20 23 25 27 30 33
33 38 44 51 60 71 84 97 113 134 151 167 190 211
16 20 25 32 40 50 63 75 90 125 140 155 180 200
40 60 70 90 100
0.77 0.82 0.88 1.09 1.35 1.59 1.97 2.94 3.62 5.03 6.65 6.95 8.03 9.86
GOEMA
www.vink.be
VII - 683
beugels colliers de fixation mounting clips
PE BUISKLEMMEN COLLIERS DE FIXATION EN PE PE PIPE CLIPS 10 stuks per rij, 100 stuks per verpakking. 10 pièces par rangée, 100 pièces par emballage. 10 pieces per row, 100 pieces per packing.
ASV
D
h1
h2
d1
d2
b
h
t
a
a1
€/ST/PC
6 8 10 12 15 18 22 28
10 10 14 14 26 26 26 26
4 4 5 5 5 5 5 5
7.0 7.0 8.5 8.5 8.5 8.5
4.0 4.0 4.0 4.0 4.3 4.3 4.3 4.3
12 16 20 24 27 31 36 44
14.0 16.0 20.0 22.0 34.0 35.5 37.0 39.0
15 15 15 15 15 15 15 15
21 25 22 26 29 33 38 46
10 12 -
0.33 0.34 0.45 0.49 0.66 0.78 0.87 1.11
€/ST/PC PE PP zwart RAL noir 7031 black
BUISKLEMMEN COLLIERS DE FIXATION PIPE CLIPS
ASV
ASV
www.vink.be
d
D
b
h
H
k
t
s
d1
d2
16 20 25 32 40 50 63 75 90 110 125 140 160
16.0 20.0 25.0 32.0 40.4 50.5 63.6 75.7 90.9 111.0 126.2 141.3 161.5
16 16 17 16 25 25 25 30 30 30 40 40 40
24 25 26 30 43 47 57 64 73 85 117 132 150
32 34 35 44 68 77 94 107 124 146 187 209 238
32 32 41 49 58 69 84 126 143 163 183 199 220
109 125 145 165 181 202
8 8 8 10 10 10 10 10 10
10 10 11 11 7 7 9 9 9 9 9 9 9
5.0 5.0 5.5 5.5 14.5 14.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5
VII - 684
0.70 0.74 0.87 1.15 1.28 1.57 1.94 3.09 4.20 4.94 6.80 7.87 9.02
beugels colliers de fixation mounting clips
PP BUISKLEMMEN COLLIERS DE FIXATION EN PP PP PIPE CLIPS
AGRU
da
s1
s2
s3
s4
d
KG/ST/PC
€/ST/PC
20 25 32 40 50
6.0 10.0 11.5 14.0 15.0
29 34 39 50 56
6.5 6.5 6.5 6.5 6.5
9 9 9 9 9
6.5 6.5 6.5 6.5 6.5
0.01 0.01 0.01 0.02 0.03
1.96 2.25 2.37 2.49 3.07
PP-GFK BUISKLEMMEN COLLIERS DE FIXATION PP-GRP PP-GRP PIPE CLIPS Materiaal : Beugel : PP zwart, glasvezelversterkt. Hierdoor bekomt men goede chemische bestendigheid en hoge mechanische sterkte. Verzekeringsplaatje : roestvrij staal, inclusief. Technische kenmerken : Zodanig ontworpen dat ze, ook bij extreme druk, temperatuur en belasting van de buis, als glijbeugel dienst doet. Bevestigingsmetode : vijzen, lassen of schieten.
AGRU-BLACK
Matériaux : Collier : PP noir renforcé de fibres de verre pour obtenir une bonne résistance chimique et une construction solide. Clip de fixation : acier inoxydable inlus Données techniques : Conçu de telle sorte qu’il fonctionne comme un collier coulissant même lors de températures ou de pressions extrêmes. Fixation par vis, soudage ou clous tirés. Material : Pipe clip : glassfibre reinforced resulting in a good chemical resistance and a high mechanical strength. Clamp for fastening : stainless steel. Technical characteristics : Designed to act as a slide clip even in situations of extreme pressure, temperature and duty. Fixation by screwing, welding or shooting, inclusive.
www.vink.be
da
z
d1
d2
h
b
KG/ST/PC
€/ST/PC
63 75 90 110 125 140 160 180 200 225
52 61 67 80 93 108 116 136 148 158
74 82 82 82 110 110 110 110 110 110
78 94 108 137 155 164 184 211 238 261
95 112 128 152 173 198 217 251 268 291
30 40 40 40 60 60 60 60 60 60
0.13 0.19 0.22 0.28 0.59 0.64 0.72 0.99 1.18 1.32
4.80 5.12 5.18 5.94 8.40 10.42 11.62 16.19 18.21 19.50
VII - 685
beugels colliers de fixation mounting clips
a s
di
g g
RSR
EXTRA ZWARE BEUGELS, GEGALVANISEERD COLLIERS GALVANISES EXTRA LOURDS HEAVY PIPE CLIPS IN GALVANIZED STEEL
g
Plaatsing d.m.v. voetplaat met verbinding door dubbele nippel of gegalvaniseerde buis 3/4”, 5/4”.
h
Montage à l’aide d’une plaque de fixation fixée avec un mamelon double ou tube en acier galvanisé 3/4”, 5/4”. Mounting with support plate and barrel nippel or galvanized pipe 3/4”, 5/4”. d
di
a
LxB
ga
g
f
h
G/ST/PC
€/ST/PC
50 63 75 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500
50 63 75 80 110 125 140 180 180 200 225 250 280 315 355 400 480 500
110 135 139 154 176 190 205 225 246 208 309 317 347 382 422 407 336 635
30 x 5 30 x 5 30 x 5 30 x 5 30 x 5 30 x 5 30 x 5 30 x 5 30 x 5 50 x 5 50 x 5 50 x 5 50 x 5 50 x 5 50 x 5 50 x 5 50 x 5 50 x 5
140 160 177 200 230 255 275 312 340 395 437 480 525 579 649 715 800 875
3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 5/4” 5/4” 5/4” 5/4” 5/4” 5/4” 5/4” 5/4” 5/4”
32 32 32 32 32 32 32 32 32 48 48 48 48 48 48 48 48 48
16 16 16 16 16 16 16 16 16 22 22 22 22 22 22 22 22 22
440 500 520 580 660 700 760 820 860 1240 1620 2500 2680 2800 2980 4040 4100 4480
11.87 11.87 12.11 12.65 13.33 14.01 14.73 14.90 21.80 38.44 43.16 46.94 50.67 55.78 63.27 66.32 127.50 *
RVS op aanvraag / acier inoxydable sur demande / stainless steel on request * op aanvraag / sur demande / on request
VOETPLAAT VOOR RSR PLAQUE DE FIXATION POUR RSR SUPPORT PLATE FOR RSR AANSLUITING FIXATION 3/4” 1 1/4”
€/ST/PC GALVA 12.90 20.82
GALVA DUBBELE NIPPEL VOOR RSR NIPPLE DOUBLE GALVA POUR RSR BARREL NIPPEL GALVA FOR RSR AANSLUITING FIXATION 3/4” 1 1/4”
www.vink.be
€/ST/PC 4.64 9.60
VII - 686
buisbevestigingssystemen supportage et colliers pour tuyauteries et canalisations pipe support systems
ISOFIX
ISOPHONISCHE BUISBEUGEL M-8/M-10 COLLIER ISOPHONIQUE M-8/M-10 ISOPHONIC PIPE CLAMP M-8/M-10
GEGALVANISEERD STAAL ACIER GALVANISE GALVANISED STEEL
DIN 4109, EPDM lining Temp.: -40°C - +110°C Geluidsdemping: 18dB Trekkracht bij breuk: 6000 N Max. trekkracht bij veilige werking: 2000 N Zijschroeven: M6 Réduction sonore: 18dB Traction à la rupture: 6000 N Traction max. en travail sécurisé: 2000 N Vis laterales: M6 Sound deadling: 18dB Tensile force by rupture: 6000 N Max. tencile force in effective action: 2000 N Side screws: M6 REF. 115018 115022 115035 115040 115048 115060 115075 115090 115110 115125 115140 115160 115180 115200
diam.
“
15-19 20-25 32-36 38-43 47-51 60-64 75-80 87-92 107-112 125-130 138-142 159-166 179-184 199-205
3/8 1/2 1 1 1/4 1 1/2 2 2 1/2 3 5 6 -
BxD
M
20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.5 20 x 2.5
M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10
M : bevestigingschroefdraad / filet de fixation / mounting thread
www.vink.be
VII - 687
KG (100 st/pc)
€/ST/PC
7.22 8.00 9.52 10.47 11.51 13.46 16.42 18.32 24.85 27.49 28.95 41.86 45.20 47.86
1.35 1.42 1.64 1.71 1.93 2.18 2.40 2.77 3.31 3.64 4.77 5.10 7.68 8.15
buisbevestigingssystemen supportage et colliers pour tuyauteries et canalisations pipe support systems
ISOFIX
ISOPHONISCHE VENTILATIE BUISBEUGEL M-8/M-10 COLLIER ISOPHONIQUE DE TYPE VENTILATION M-8/M-10 ISOPHONIC VENTILATION PIPE CLAMP M-8/M-10 Gegalvaniseerd staal Acier galvanisé Galvanised steel DIN 4109, EPDM lining Temp.: -40°C - +110°C Geluidsdemping: 18dB Trekkracht bij breuk: 6000 N Max. trekkracht bij veilige werking: 2000 N Zijschroeven: M6 Réduction sonore: 18dB Traction à la rupture: 6000 N Traction max. en travail sécurisé: 2000 N Vis laterales: M6 Sound deadling: 18dB Tensile force by rupture: 6000 N Max. tencile force in efective action: 2000 N Side screws: M6 REF. 115224 115250 115315 115355 115400 115450 115500
diam. 223-228 249-254 314-319 354-359 399-404 449-454 499-504
BxD MM 20 20 20 20 20 20 20
x x x x x x x
2.5 2.5 2.5 2.5 2.5 2.5 2.5
M M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10
KG (100 st/pc)
€/ST/PC
51.74 55.56 67.28 74.37 119.08
9.54 9.90 11.25 12.12 15.40 16.30 17.15
M : bevestigingschroefdraad / filet de fixation / mounting thread
www.vink.be
VII - 688
buisbevestigingssystemen supportage et colliers pour tuyauteries et canalisations pipe support systems
BUISBEUGEL M-8/M-10 COLLIER M-8/M-10 PIPE CLAMP M-8/M-10
ISOFIX
GEGALVANISEERD STAAL ACIER GALVANISE GALVANISED STEEL
Trekkracht bij breuk: 6000 N Max. trekkracht bij veilige werking: 2000 N Zijschroeven: M6 Traction à la rupture: 6000 N Traction max. en travail sécurisé: 2000 N Vis laterales: M6 Tensile force by rupture: 6000 N Max. tencile force in effective action: 2000 N Side screws: M6 REF. 133022 133035 133040 133048 133060 133070 133075 133090 133110 133125 133140 133160 133180 133200
diam.
“
20-25 32-36 38-43 47-51 60-64 68-72 75-80 87-92 107-112 125-130 138-142 159-166 179-184 199-205
1/2 1 1 1/4 1 1/2 2 2 1/2 3 5 6 -
BxD MM
M
20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.5 20 x 2.5
M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10
KG (100 st/pc)
€/ST/PC
8.00 9.52 10.47 11.51 13.46 15.00 16.42 18.32 24.85 27.49 28.95 41.86 45.20 47.86
1.16 1.27 1.38 1.49 1.60 1.46 1.75 1.93 2.22 2.40 3.06 3.46 5.61 6.22
M : bevestigingschroefdraad / filet de fixation / mounting thread
BUISBEUGEL VOOR VENTILATIE M-8/M-10, GEGALVANISEERD STAAL COLLIER DE TUYAU POUR VENTILATION M-8/M-10, ACIER GALVANISE VENTILTION PIPE CLAMP M-8/M-10, GALVANISED STEEL Trekkracht bij breuk: 6000 N Max. trekkracht bij veilige werking: 2000 N Zijschroeven: M6 Traction à la rupture: 6000 N Traction max. en travail sécurisé: 2000 N Vis laterales: M6 Tensile force by rupture: 6000 N Max. tencile force in effective action: 2000 N Side screws: M6 REF. 133224 133250 133315 133355 133400 133450 133500
diam. 223-228 249-254 314-319 354-359 399-404 449-454 499.504
BxD MM 20 20 20 20 20 20 20
x x x x x x x
2.5 2.5 2.5 2.5 2.5 2.5 2.5
M
KG (100 st/pc)
€/ST/PC
M8 M8 M8 M8 M8 M8 M8
51.74 55.56 67.28 74.37 119.08
7.03 7.50 8.37 9.03 9.86 * *
M : bevestigingschroefdraad / filet de fixation / mounting thread
www.vink.be
VII - 689
buisbevestigingssystemen supportage et colliers pour tuyauteries et canalisations pipe support systems
ISOFIX
ISOPHONISCHE BUISBEUGEL M-8/M-10 COLLIER ISOPHONIQUE M-8/M-10 ISOPHONIC PIPE CLAMP M-8/M-10
RVS 316 / A4 INOX 316 / A4 AISI 316 / A4
DIN 4109, EPDM lining Temp.: -40°C - +110°C
INOX
Geluidsdemping: 18dB Trekkracht bij breuk: 6000 N Max. trekkracht bij veilige werking: 2000 N Zijschroeven: M6 Réduction sonore: 18dB Traction à la rupture: 6000 N Traction max. en travail sécurisé: 2000 N Vis laterales: M6 Sound deadling: 18dB Tensile force by rupture: 6000 N Max. tencile force in effective action: 2000 N Side screws: M6 REF. 137022 137028 137035 137040 137048 137060 137075 137090 137110 137115 137125 137140 137160
diam.
“
20-24 26-30 32-36 38-42 47-50 60-64 75-80 87-92 106-112 114-119 124-131 133-140 159-165
1/2 3/4 1 11/4 11/2 2 21/2 3 4 5 6
BxD MM
M
20 x 20 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0
M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10
M : bevestigingschroefdraad / filet de fixation / mounting thread
www.vink.be
VII - 690
KG (100 st/pc)
€/ST/PC
7.31 7.85 8.63 10.25 11.36 12.97 15.73 17.28 20.85 21.60 22.20 22.80 26.80
6.37 6.60 7.10 7.61 8.23 9.46 10.26 11.32 13.32 13.76 14.56 15.76 17.00
buisbevestigingssystemen supportage et colliers pour tuyauteries et canalisations pipe support systems
BUISBEUGEL M-8/M-10 COLLIER M-8/M-10 PIPE CLAMP M-8/M-10
ISOFIX
RVS 316 / A4 INOX 316 / A4 AISI 316 / A4
Trekkracht bij breuk: 6000 N Max. trekkracht bij veilige werking: 2000 N Zijschroeven: M6
INOX
Traction à la rupture: 6000 N Traction max. en travail sécurisé: 2000 N Vis laterales: M6 Tensile force by rupture: 6000 N Max. tencile force in efective action: 2000 N Side screws: M6 REF. 130018 130022 130028 130035 130040 130048 130060 130075 130090 130110 130125 130140 130160 130200 130220
diam.
“
15-18 20-24 26-30 32-36 36-42 47-50 60-64 75-80 87-92 106-112 124-131 133-140 159-163 199-204 215-225
3/8 1/2 3/4 1 11/4 11/2 2 21/2 3 5 6 8
BxD MM
M
20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0 20 x 2.0
M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10
M : bevestigingschroefdraad / filet de fixation / mounting thread
HALFSCHAAL VERZINKT SUPPORT SEMI-TUBE, GALVANISE SUPPORT BY SEMI-TUBE GALVANIZED L=3m
8501
www.vink.be
d
€/M
16-25 32 40 50 63 75 90 110
4.70 4.70 4.70 4.70 5.66 6.09 6.66 7.43
VII - 691
KG (100 st/pc)
€/ST/PC
4.96 5.47 6.09 6.45 7.75 8.30 10.04 11.58 12.30 16.70 17.49 19.21 21.40 25.61 26.91
5.24 5.53 5.79 6.12 6.59 7.03 7.79 8.66 9.54 10.99 12.67 14.71 14.74 15.22 17.00
dichtingen joints seals
O-RINGEN JOINTS TORIQUES O-RINGS Voor driedelige koppeling type BIV, BIFV, BFV, BIC, BIFC, BIM, BIFM, BIF, BIRV. Pour raccords-union 3 pièces type BIV, BIFV, BFV, BIC, BIFC, BIRV. For socket unions type BIV, BIFV, BFV, BIC, BIFC, BIRV.
www.vink.be
D
G
d
s
EPDM €/ST/PC
FPM €/ST/PC
16 20 25 32 40 50 63 75 90 110
3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
15.54 20.22 28.17 32.93 40.65 47.00 59.69 75.67 88.25 113.67
2.62 3.53 3.53 3.53 5.34 5.34 5.34 5.34 5.34 5.34
1.01 1.22 1.37 1.87 1.97 2.06 2.35 4.60 6.94 9.16
2.60 3.17 3.99 5.14 7.63 8.69 9.73 -
VII - 692
dichtingen joints seals
VLAKKE DICHTINGEN JOINTS PLATS FLAT SEALS Voor kragen type QRV, QRC, QRF, QRM,QFV, FDV, QAS. Pour collets type QRV, QRC, QRF, QRM,QFV, FDV, QAS. For collars type QRV, QRC, QRF, QRM,QFV, FDV, QAS. BUIS TUYAU PIPE
D
d
S
FPM €/ST/PC
16 20 25 32 40 50 63 75 90 110 125 140 160 200 225 250
27 32 39 48 59 71 88 104 123 148 168 186 211 252 270 305
16 20 25 32 40 50 63 75 90 110 125 140 160 200 225 250
2 2 2 2 2 2 2 2 2 3 3 3 3 4 4 4
5.73 4.39 8.12 8.12 11.40 11.40 12.57 14.26 15.35 25.03 31.24 42.88 61.25 -
VLAKKE DICHTINGEN JOINTS PLATS FLAT SEALS Voor kragen type QAM, QRV, QRC, QRM,QFV, FDV, QAS. Pour collets type QAM, QRV, QRC, QRM,QFV, FDV, QAS. For collars type QAM, QRV, QRC, QRM,QFV, FDV, QAS.
QHV
www.vink.be
d
DN
A1
B1
SP1
f
I
EPDM €/ST/PC
20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500
15 20 25 32 40 50 65 80 100 125 125 150 150 200 200 250 250 300 350 400 450 500
17.0 22.0 28.0 36.0 45.0 57.0 71.0 84.0 102.0 132.0 132.0 152.0 192.0 215.0 238.0 265.0 290.0 -
95.0 107.0 117.0 142.5 153.3 168.0 187.5 203.0 223.0 250.0 250.0 288.5 315.0 340.0 340.0 395.0 395.0 462.0 505.0 565.0 615.0 655.0
2 2 2 2 2 2 3 3 3 3 3 4 3 4 4 4 4 4 3 3 3 3
14 14 14 18 18 18 18 18 18 18 18 22 22 22 22 22 22 22 22 22 25 22
65.0 76.3 86.5 101.0 111.0 125.5 145.5 160.0 181.0 210.0 210.0 241.5 270.0 295.0 295.0 350.0 350.0 400.0 460.0 515.0 565.0 600.0
1.32 1.32 1.34 1.36 1.53 2.38 2.80 3.38 5.22 5.76 8.68 10.76 14.23 11.56 17.40 18.75 22.28 25.29 43.73 46.19 50.71 52.94
VII - 693
dichtingen joints seals
VLAKKE DICHTINGEN JOINTS PLATS FLAT SEALS Voor slangpilaren type ADV. Pour embouts cannelés type ADV. For hose adaptors type ADV. P
G
D
d
S
EPDM €/ST/PC
12 16 20 25 32 40 50 50 63 63
1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2” 2 1/4” 2 1/2” 2 3/4”
18.0 24.0 29.5 38.5 44.0 55.0 55.0 62.0 61.0 78.0
11 17 19 24 32 42 42 46 50 60
2 2 3 3 3 3 3 3 2 3
0.39 0.47 0.47 0.56 0.68 0.99 0.99 1.32 1.73 1.86
Voor tankaansluitingen type LIV Pour raccords de réservoir type LIV For tank connectors type ADV BUIS TUYAU PIPE
G
D
d
S
EPDM €/ST/PC
25 32
1” 1 1/4”
44 55
32 42
2 2
0.80 1.22
Voor overgangskoppelingen BIGW, BIMV, BIMW, BIMZ Pour raccords d’adaptation BIGW, BIMV, BIMW, BIMZ For adaptor fittings BIGW, BIMV, BIMW, BIMZ BUIS TUYAU PIPE
D
d
S
16 20 25 32 40 50 63 75 90
24 30 38 44 55 62 78 97 109
17 21 27 32 42 46 60 75 88
2 3 3 3 3 3 3 3 3
Prijzen EPDM en FPM : op aanvraag Prix EPDM et FPM: sur demande Prices EPDM and FPM: on request
www.vink.be
VII - 694
WG
dichtingen joints seals
VLAKKE DICHTINGEN MET STAALINLAGE JOINTS PLATS AVEC ACIER INCRUSTE FLAT SEALS WITH STEEL INLAY Voor profiel WG Pour profilé WG For profile WG Volgens DIN 2690 - EN 1514-1 (PN 6 - 40) Selon DIN 2690 EN 1514-1 (PN 6 - 40) According to DIN 2690 EN 1514-1 (PN 6 - 40) DN
d1
15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400 1600 1800 2000
22 27 34 43 49 61 77 89 115 141 169 220 273 324 368 420 470 520 620 720 820 920 1020 1220 1420 1620 1820 2020
PN 2.5
PN6
PN10
d2
PN16
PN25
PN40 51 61 71 82 92 107 127 142
152 182 207
423 473
890
1220
1090 1341
328 378 438 489 540 594 695 810 917 1015 1124 1341 1548 1772 1972 2182
162 192 218 273 329 384 445 495 617 734 804 911 1011 1128
225 292 340 400 458 515 625 730 830 940 1040 1360
417 547
S
EPDM €/ST/PC
3 3 3 3 3 4 4 4 5 5 5 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8 8 8
6.87 7.04 8.53 8.99 9.31 9.92 10.19 10.53 11.74 13.57 16.79 22.10 23.00 32.91 37.34 49.41 56.82 83.24 101.36 139.19 * * * * * * * *
* op aanvraag / sur demande / on request Vet gedrukte getallen d2 corresponderen met prijzen, andere op aanvraag. Caractères gras d2 correspondent aux prix indiqués, autres sur demande. Bold numbers d2 correspond with prices hereby mentioned, others are on request. Andere drukklassen op aanvraag Autres classes de pression sur demande Other pressure classes on request
www.vink.be
VII - 695
dichtingen joints seals
VLAKKE DICHTINGEN - GORE 801 JOINTS PLATS - GORE 801 FLAT SEALS - GORE 801 Materiaal : 100% geëxpandeerd teflon (ePTFE), 3 mm dikte. Temperatuurbestendigheid : -268°C / +315°C Chemische bestendigheid : bestendig tegen chemicaliën met 0-14ph Drukbestendigheid : 68 bar Veiligheid: voldoet aan FDA21 CFR177.1550 vereisten voor voeding.
SEAL CLEAN
d2
d1
SEAL CLEAN
Matériaux: 100% teflon expandé (ePTFE), 3 mm d’épaisseur. Résistance au température: 268°C / +315°C Résistance chimique: résistante aux produits chimiques de 0-14ph Résistance au pression: 68 bar Sécurité: satisfait au FDA21 CFR177.1550 conditions pour aliments Material: 100% expanded teflon (ePTFE), 3 mm thickness Temperature range: 268°C / +315°C Chemical resistance: resistant to common chemicals 0-14ph Operating pressure: 68 bar. Safety: complies to FDA21 CFR177.1550 requirements for food. D
NW
20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315
15 20 25 32 40 50 65 80 100 100 125 150 150 200 200 250 250 300
SDR 21 / 33: SDR 11 :
www.vink.be
SDR21 d2 €/ST/PC
d1 45 58 68 78 88 102 122 138 158 158 188 212 212 268 268 320 320 370
15.3 20.3 26.1 33.6 42.8 55.1 66.4 80.0 98.0 109.9 124.8 143.0 159.9 178.4 202.3 220.2 251.2 -
PVDF PE / PP
VII - 696
6.94 9.03 11.44 13.83 17.19 24.68 32.83 37.91 49.36 38.06 62.60 81.58 70.47 131.21 117.98 177.33 157.44 -
SDR33 d2 €/ST/PC
83.1 101.3 115.5 128.8 146.9 165.6 184.3 210.7 233.0 260.5 293.3
37.91 49.36 38.06 62.60 81.58 70.47 131.21 117.98 177.33 157.44 194.13
SDR11 d2 €/ST/PC 14.7 20.0 25.3 31.3 39.9 50.2 60.5 73.1 88.9 102.4 114.1 129.8 148.0 162.5 184.3 201.7 226.5 253.5
6.94 9.03 11.44 13.83 17.19 24.68 32.83 37.91 49.36 38.06 62.60 81.58 70.47 131.21 117.98 177.33 157.44 194.13
kragen collets stubs
MUURKRAGEN COLLETS MURALS WALL STUBS EPDM, incl. 2 inox spanbanden (3 stuks vanaf DN 350) EPDM, incl. 2 colliers de serrage inox (3 pcs. à partir DN 350) EPDM, with 2 st. steel worm gear clamps (3 pcs from NW 350 on) DN
D
D1
D2
D3
b
€/ST/PC
25 32 40 50 65 80 100 125 125 150 175 175 200 225 250 300 350 400 450 500 550 600 700 800 900 1000 1200 1400
32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630 710 800 900 1000 1200 1400
29 38 48 60 71 84 105 120 120 154 175 195 215 245 275 310 350 395 440 495 555 625 705 795 895 995 1195 1395
47 56 66 78 89 102 123 138 138 172 193 213 235 263 293 328 375 420 470 520 580 650 730 820 920 1020 1220 1420
127 136 146 158 169 182 203 218 218 252 273 293 315 343 373 408 435 480 530 580 640 710 790 880 980 1080 1280 1480
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 75 75 75 75 75 75 75 75 75 75 75 75
48.05 48.05 48.05 49.71 54.21 56.75 61.33 65.88 67.15 67.49 69.88 71.15 73.34 75.16 78.62 86.97 104.30 113.31 119.28 133.40 145.76 159.82 184.92 195.33 233.46 274.38 323.34 *
* op aanvraag / sur demande / on request
www.vink.be
VII - 697
toebehoren voor kranen accessoires pour vannes accessories for valves
ZEEFJES TAMIS SCREENS Voor vuilvangers type RV. Leverbaar in maaswijdten : PVC : 1.0 - 1.5 - 2.0 - 2.5 mm INOX : 0.7 mm PP : 1.5 mm Pour filtres type : RV. Livrables avec trous de passage : PVC : 1.0 - 1.5 - 2.0 - 2.5 mm INOX : 0.7 mm PP : 1.5 mm For sediment strainers type RV. Available in mesh widths : PVC : 1.0 - 1.5 - 2.0 - 2.5 mm ST-STEEL : 0.7 mm PP : 1.5 mm
www.vink.be
D
DN
G
L
d
16 20 25 32 40 50 63 75 90 110
10 15 20 25 32 40 50 65 80 100
3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
44.0 44.0 52.5 62.0 63.5 71.5 82.5 118.0 121.0 156.0
13.6 13.6 16.5 21.4 30.0 35.0 44.0 62.0 76.0 94.0
VII - 698
PVC
€/ST/PC INOX ST-STEEL
PP
5.43 5.43 5.96 6.24 7.65 7.65 9.00 18.24 22.69 33.70
6.67 6.67 7.12 7.65 9.00 9.17 10.87 35.82 41.69 59.46
8.04 8.04 8.60 9.26 10.50 11.71 14.17 18.94 23.95 34.97
uitzettingscompensatoren compensateurs de dilatation expansion joints
BALGCOMPENSATOREN COMPENSATEURS A SOUFLET FLEXIBLE EXPANSION JOINTS Deze High-Tech rubber balgcompensatoren werden ontwikkeld om een oplossing te geven aan het axiaal uitzetten of krimpen, het lateraal verplaatsen, hoekverdraaiingen en waterslagen in vaste leidingen. DVGW gekeurd.
TYPE ERV
Ce type de compensateurs à soufflet “High-Tech” a été développé afin de résoudre le problème de la dilatation axiale ou le rétrécissement, le déplacement latéral, les rotations angulaires et les coups de bellier dans des systèmes de conduites fixes. DVGW approuvé. These flexible expansion joints were developped to solve the problem of axial expansion or shrinkage, lateral displacement, angular rotations and water stroke in fixed piping systems. DVGW approved. DN
PN
25-40 50-80 100-125 150-200 250-300 350-400 500-1000
16 16 16 16 10 10 10
TESTDRUK
bar bar bar bar bar bar bar
25 25 25 25 16 16
MAX. WERKDRUK PRESS. MAX MAX. PRESSURE 70°C 80°C 90°C
bar bar bar bar bar bar
14 14 14 14 8 8 8
12 12 12 12 7 7 7
10 10 10 10 6 6 6
DIN FLENS/BRIDE/FLANGE DN
L
PN
D
K
Lx Æ
KG/ ST/PC
25 32 40 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
130 130 130 130 130 130 130 130 130 130 130 130 200 200 200 200 250 250 300 300
16 16 16 16 16 16 16 16 16 10 10 10 10 10 10 10 10 10 10 10
115 140 150 165 185 200 220 250 285 340 395 445 505 565 670 780 895 1015 1115 1230
85 100 110 125 145 160 180 210 240 295 350 400 460 515 620 725 840 850 1050 1160
4 x 14 4 x 18 4 x 18 4 x 18 4 x 18 8 x 18 8 x 18 8 x 18 8 x 22 8 x 22 12 x 22 12 x 22 16 x 22 16 x 26 20 x 26 20 x 30 24 x 30 24 x 33 28 x 33 28 x 36
2.3 2.7 4.0 4.5 5.0 6.5 8.0 9.5 13.2 17.6 22.5 26.0 28.0 37.5 47.5 76.0 * 176 * *
* op aanvraag / sur demande / on request ERV-W & ERV-RTR: op aanvraag / sur demande / on request
www.vink.be
VII - 699
EPDM ERV-R
€/ST/PC HYPALON ERV-GR
210.24 218.69 222.80 244.00 257.53 275.03 303.69 350.96 400.81 504.84 649.77 892.58 * * * * * * * *
246.49 254.60 268.42 292.34 311.91 326.51 356.59 404.38 464.19 564.97 * * * * * * * * * *
NBR ERV-G 222.69 229.28 237.84 258.60 272.97 273.96 319.48 372.47 424.59 521.94 * * * * * * * * * *
uitzettingscompensatoren compensateurs de dilatation expansion joints
BALGCOMPENSATOREN COMPENSATEURS A SOUFLET FLEXIBLE EXPANSION JOINTS Vervolg / suite / continued Bewegingsbereik / portée de mouvement / movement range BL
TYPE ERV
130 150 160 200 250 300
TOL. +5/-0 +5/-0 +5/-0 +5/-0 +5/-0 +5/-0
mm mm mm mm mm mm
EL. MIN.
EL max.
L. min
L max
120 140 145 180 230 280
135 155 170 210 260 310
100 115 125 160 210 260
160 180 195 235 285 340
LAT. OFFSET ± ± ± ± ± ±
30 30 35 35 35 40
DN 25-50 65-80 100-150 200-300 350-600 700-800 900-1000
ANGUL. ROT. ± ± ± ± ± ± ±
30° 25° 20° 10° 8° 6° 5°
Rubber balgcompensatoren voor koud-en warm water, zeewater en chemicaliën gebruikt in waterbereiding / behandeling. Niet geschikt voor olie-en petroleumproducten en olievervuild water. Max. temp. bereik : tot 100°C (afhankelijk van het medium) Binnenwand : IIR/EPDM compound, diffusiedicht, elektrisch geleidend, zwart. Versterking : Nylon textielkoord Buitenwand : EPDM zwart, ozonbestendig. Met rode markeringsband, elektrisch geleidend. Flenzen : draaibaar, staal ST 37.2, vuurverzinkt in geel verchroomd (op aanvraag leverbaar overeenkomstig ABS norm of in RVS). Compensateur à souflet pour de l’eau froid ou chaud de la mer et chemicales usé dans la préparation / traitement de l’eau. Ne convient pas pour l’usage avec des produits petrochimiques et de l’eau pollué de huile. Temp. max. : jusqu’à 100°C (selon le milieu) Paroi intérieur : IIR/EPDM compound, fermé de diffusion, conducteur d’electricité, noir Renforcement : corde de textile en nylon Paroi extérieur : EPDM noir, résistant à l’ozon, avec bande de marquage en rouge, conducteur d’électricité tournable Brides : tournables, acier ST 37.2, zingué à feu en jaune chromé (sur demande livrable selon norme ABS ou en inox) Flexible expansion joint for cold and hot water, sea water and chemicals used in water preparation/ handling. Not suitable for oil and poluted water. Max. temperature : up to 100°C (depending on the medium) Inner wall : IIR/EPDM compound, diffusion closed, electrically conductive, black. Reinforcement : nylon textile cord. Outer wall : EPDM, black, ozon resistant, red markingstrip, electrically conductive Flanges : turnable, steel ST 37.2, fire zinced and yellow chromed (on request available according to ABS norm or oin stainless steel)
www.vink.be
VII - 700
uitzettingscompensatoren compensateurs de dilatation expansion joints
BALGCOMPENSATOREN COMPENSATEURS A SOUFLET FLEXIBLE EXPANSION JOINTS Vervolg / suite / continued
TYPE ERV
Rubber balgcompensatoren voor zuren, basen en andere chemicaliën. Max. temp. bereik : tot 100°C (afhankelijk van het medium) Binnenwand : CSM, zwart. Versterking : Nylon textielkoord Buitenwand : hypalon zwart. Met groene markeringsband, Flenzen : draaibaar, staal ST 37.2, vuurverzinkt in geel verchroomd (op aanvraag leverbaar overeenkomstig ABS norm of in RVS). Compensateur à soufflet pour des acides, bases et autres produits chimiques Temp. max. : jusqu’à 100°C (selon le milieu) Paroi intérieur : CSM, noir Renforcement : corde de textile en nylon Paroi extérieur : hypalon noir, avec bande de marquage en vert, Brides : tournables, acier ST 37.2, zingué à feu en jaune chromé (sur demande livrable selon norme ABS ou en inox) Flexible expansion joint for acids, bases and other chemicals. Max. temperature : up to 100°C (depending on the medium) Inner wall : CSM, black. Reinforcement : nylon textile cord. Outer wall : hypalon, black, green markingstrip Flanges : turnable, steel ST 37.2, fire zinced and yellow chromed (on request available according to ABS norm or in stainless steel) ERV-G Rubber balgcompensatoren voor olie- en petroleumprodukten alsook voor met olie vervuild water. Max. temp. bereik : tot 90°C (afhankelijk van het medium) Binnenwand : NBR, zwart. Versterking : Nylon textielkoord Buitenwand : chloropeen zwart. Met gele markeringsband, Flenzen : draaibaar, staal ST 37.2, vuurverzinkt in geel verchroomd (op aanvraag leverbaar overeenkomstig ABS norm of in RVS). Compensateur à soufflet pour de l’huile, des produits petrochimiques et de l’eau pollué de l’huile. Temp. max. : jusqu’à 90°C (selon le milieu) Paroi intérieur : NBR, noir Renforcement : corde de textile en nylon Paroi extérieur : chloropène noir, avec bande de marquage en jaune, Brides : tournables, acier ST 37.2, zingué à feu en jaune chromé (sur demande livrable selon norme ABS ou en inox) Flexible expansion joint for oil and petrol products and oil poluated water. Max. temperature : up to 90°C (depending on the medium) Inner wall : NBR, black. Reinforcement : nylon textile cord. Outer wall : chloropene, black, yellow markingstrip Flanges : turnable, steel ST 37.2, fire zinced and yellow chromed (on request available according to ABS norm or in stainless steel)
www.vink.be
VII - 701
uitzettingscompensatoren compensateurs de dilatation expansion joints
BALGCOMPENSATOREN COMPENSATEURS A SOUFLET FLEXIBLE EXPANSION JOINTS Vervolg / suite / continued ERV-W
TYPE ERV
Rubber balgcompensatoren conform levensmiddelennormen. Max. temp. bereik : tot 90°C. (afhankelijk van het medium) Binnenwand : NBR, wit. Versterking : Nylon textielkoord Buitenwand : chloropeen, zwart. Met witte markeringsband, Flenzen : draaibaar, staal ST 37.2, vuurverzinkt in geel verchroomd (op aanvraag leverbaar overeenkomstig ABS norm of in RVS). Compensateur à soufflet répond aux standards alimentaires Temp. max. : jusqu’à 90°C. (selon le milieu) Paroi intérieur : NBR, blanc Renforcement : corde de textile en nylon Paroi extérieur : chloropène noir, avec bande de marquage en blanc, Brides : tournables, acier ST 37.2, zingué à feu en jaune chromé (sur demande livrable selon norme ABS ou en inox) Flexible expansion joint according to food standards. Max. temperature : up to 90°C. (depending on the medium) Inner wall : NBR, white. Reinforcement : nylon textile cord. Outer wall : chloropene, black, white markingstrip Flanges : turnable, steel ST 37.2, fire zinced and yellow chromed (on request available according to ABS norm or in stainless steel) ERV-R Rubber balgcompensatoren met goedkeuring voor drinkwater. Max. temp. bereik : tot 100°C. (afhankelijk van het medium) Binnenwand : EPDM, zwart. Versterking : staaldraad Buitenwand : EPDM zwart. Met rode markeringsband, Flenzen : draaibaar, staal ST 37.2, vuurverzinkt in geel verchroomd (op aanvraag leverbaar overeenkomstig ABS norm of in RVS). Compensateur à soufflet avec approbation eau potable. Temp. max. : jusqu’à 100°C. (selon le milieu) Paroi intérieur : EPDM noir Renforcement : corde de fer Paroi extérieur : EPDM noir, avec bande de marquage en rouge, Brides : tournables, acier ST 37.2, zingué à feu en jaune chromé (sur demande livrable selon norme ABS ou en inox) Flexible expansion joint with agreement for drinking water. Max. temperature : up to 100°C. (depending on the medium) Inner wall : EPDM, black. Reinforcement : steel cord. Outer wall : EPDM, black, red markingstrip Flanges : turnable, steel ST 37.2, fire zinced and yellow chromed (on request available according to ABS norm or in stainless steel)
www.vink.be
VII - 702
uitzettingscompensatoren compensateurs de dilatation expansion joints
PTFE
TEFLOFLEX-31 PTFE compensatoren met versterkingsringen, 3 golven. Voorzien van begrenzingsbouten. Losse flenzen DN 15-DN 600. Flensafmetingen volgens DIN 2501 PN 10. Temperatuurbereik : -30°C - +230°C Compensateurs en PTFE avec bagues de renforcement, 3 ondes. Pourvu des boulons de limitation. Brides libres DN 15 - DN 600. Dimensions des brides selon DIN 2501 PN 10. Portée de température : -30°C - +230°C
TECHNOFLEX-3
PTFE expansion joints with reinforcement rings, 3 waves. Provided with limitation bolts. Loose flanges DN 15 - DN 600. Flange dimensions according to DIN 2501 PN 10. Temperature range : -30°C - +230°C Materialen / matériaux / materials 1. 2. 1. 3.1 3.2 4.
PTFE (ASTM D-4895) 4301, V-ring RSt37-2 = 1.0038, DIN 2642 verzinkt/zingué/zinc plated X10CrNiTi 189 = 1.4541 DIN 2642 DIN 601, bouten en moeren/ vis et écrous/ bolts and nuts
Druk / temperatuur 3 golven Pression / température 3 ondes Pressure / temperature 3 waves
Hoekverdraaiing max. 14°, zonder begrenzingsbouten. De barstdruk is 4x de in de tabel opgegeven werkdruk. De opgegeven waarden zijn gemiddelden en gelden bij kamertemperatuur. Rotation angulaire de max. 14°, sans boulons de limitation. La pression d’éclatement est 4x les valeurs données dans le table. Les valeurs données sont des moyens et sont valables au température de chambre. Angular deflection max. 14°, without limitation bolts. The burst pressure is 4x the maximum working pressure shown on the diagramm. The stated values are average values and apply to room temperature.
www.vink.be
VII - 703
uitzettingscompensatoren compensateurs de dilatation expansion joints
PTFE
TEFLOFLEX-31 Vervolg / suite / continued
TECHNOFLEX-3
DN
L
COMP. AXIAL LATERAL
15 20 25 40 50 65 80 100 125 150 200
45 45 46 50 56 77 77 91 111 101 137
10 12 13 13 15 19 25 25 25 28 28
4 5 6 6 9 9 13 13 14 14 14
250
200
30
14
300
196
30
15
350
215
32
18
400
233
35
20
450
280
30
20
500 600
327 300
30 25
25 20
VACUUM 104Pa MAX °C 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 2.0 0.7 3.4 1.5 6.7 1.5 6.7 1.5 6.7 3.4 7.0 8.0 8.7
200 200 200 200 200 200 200 200 150 150 50 150 45 100 45 100 45 100 45 100 45 100 100 100
DRAAD FIL THREAD
KG
D1
D3
s
4 x M12 4 x M12 4 x M12 4 x M16 4 x M16 4 x M16 8 x M16 8 x M16 8 x M16 8 x M20 8 x M20
1.7 1.7 1.7 2.6 3.8 4.6 5.3 7.0 11.4 12.7 21
24 24 24 36 50 60 76 100 122 150 204
43 43 43 57 75 91 104 134 163 188 250
3.00 3.00 3.00 3.00 3.00 3.00 3.50 4.00 4.25 4.50 5.25
12 x M20
27
255
325
5.25
12 x M20
35
280
345
5.50
16 x M20
60
350
438
6.00
16 x M24
75
390
462
6.50
20 x M24
91
425
515
6.50
20 x M24 20 x M27
110 140
470 575
555 665
6.50 5.00
prijzen op aanvraag / prix sur demande / prices on request
www.vink.be
VII - 704
uitzettingscompensatoren compensateurs de dilatation expansion joints
TEFLOFLEX-31 PTFE compensatoren met versterkingsringen, 5 golven. Voorzien van begrenzingsbouten. Losse flenzen DN 15-DN 500. Flensafmetingen volgens DIN 2501 PN 10. Temperatuurbereik : -30°C - +230°C Compensateurs en PTFE avec bagues de renforcement, 5 ondes. Pourvu des boulons de limitation. Brides libres DN 15 - DN 500. Dimensions des brides selon DIN 2501 PN 10. Portée de température : -30°C - +230°C
TEFLOFLEX-5
PTFE expansion joints with reinforcement rings, 5 waves. Provided with limitation bolts. Loose flanges DN 15 - DN 500. Flange dimensions according to DIN 2501 PN 10. Temperature range : -30°C - +230°C Materialen / matériaux / materials 1. PTFE (ASTM D-4895) 2. 1.4301, V-ring 3.1 RSt37-2 = 1.0038, DIN 2642 verzinkt / zingué / zinc plated 3.2 X10CrNiTi 189 = 1.4541 DIN 2642 4. DIN 601, bouten en moeren / vis et écrous / bolts and nuts Hoekverdraaiing max. 14°, zonder begrenzingsbouten. De barstdruk is 4x de in de tabel opgegeven werkdruk. De opgegeven waarden zijn gemiddelden en gelden bij kamertemperatuur. Rotation angulaire de max. 14°, sans boulons de limitation. La pression d’éclatement est 4x les valeurs données dans le table. Les valeurs données sont des moyens et sont valables au température de chambre. Angular deflection max. 14°, without limitation bolts. The burst pressure is 4x the max. working pressure shown on the diagramm. The stated values are average values and apply to room temperature. Druk / temperatuur 5 golven Pression / température 5 ondes Pressure / temperature 5 waves
www.vink.be
DN
L
15 20 25 40 50 65 80 100 125 150 200 250 300 350 400 500
65 65 68 80 88 117 117 139 167 153 207 300 288 325 343 520
COMP. AXIAL LATERAL 10 12 13 13 19 25 25 25 32 32 32 32 35 35 40 40
VII - 705
8 10 12 12 12 13 16 16 16 16 16 16 18 18 25 25
DRAAD FIL/THREAD
KG
d1
d3
s
4 X M12 4 x M12 4 x M12 4 x M16 4 x M16 4 x M16 8 x M16 8 x M16 8 x M16 8 x M20 8 x M20 12 x M20 12 x M20 16 x M20 16 x M24 20 x M24
1.9 1.9 1.9 2.7 4.3 5.0 5.4 7.1 12.0 14.2 22.0 29.0 40.0 65.0 81.0 110.0
24 24 24 36 50 60 76 100 122 150 204 255 280 350 390 470
43 43 43 57 75 91 104 134 163 188 250 325 345 438 462 555
3.00 3.00 3.00 3.00 3.00 3.00 3.50 4.00 4.25 4.50 5.25 5.25 5.50 6.00 6.50 6.50
uitzettingscompensatoren compensateurs de dilatation expansion joints
PE/PP
KOMPENSATOR COMPENSATEUR EXPANSION JOINT SDR 11 Met EPDM (NBR) ringen - Systeem 3S Kompensatoren zijn niet trekvast. Uitvoering 1: met aangelaste GVK flens Uitvoering 2: voor stomplas Avec joint à lèvres en EPDM (NBR) - Système 3S Compensateurs ne sont pas résistantes à la traction. Type 1: avec collet soudé et bride folle en polyester FRP Type 2: pour le soudage bout à bout With EPDM (NBR) lip seals - System 3S Flexion joints are not pull-resistant Type 1: with welded stub end and loose FRP backing ring Type 2: for butt welding
d1
s
LD
ds x b
LD
BG
Z2
Z1
63 75 90 110 125 140 160 180 200 225 250 280 315 355 400
5.8 6.9 8.2 10.0 11.4 12.8 14.6 16.4 18.2 20.5 22.8 25.5 28.7 32.4 36.4
170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
90 x 45 93 x 45 114 x 45 144 x 45 164 x 45 184 x 55 200 x 55 225 x 55 256 x 55 280 x 55 321 x 65 360 x 65 405 x 65 440 x 75 500 x 75
170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
90 x 40 90 x 40 110 x 40 140 x 40 160 x 40 180 x 50 200 x 50 225 x 50 250 x 50 280 x 50 315 x 60 355 x 60 400 x 60 457 x 70 506 x 70
810 810 870 885 905 905 920 930 970 970 975 975 990 1030 1045
730 730 730 745 765 780 780 790 790 790 795 795 810 810 825
BG = beugelgrootte / largeur du collier / size of clip
Prijzen op aanvraag / prix sur demande / prices on request
www.vink.be
VII - 706
steek- en uitzettingsmoffen manchons à emboitement et de dilatation plug and expansion socket joints
PE/PP-R
STEEK- EN UITZETTINGSMOF MANCHONS A EMBOITEMENT ET DE DILATATION PLUG AND EXPANSION SOCKET JOINTS Met EPDM lipring - Systeem 3S Avec joint à lèvres en EPDM - système 3S With EPDM lip seal - system 3S
SDR 17 / 17,6
SDR 11
d1
s
D
Z
I1
LD
KG
d1
s
D
Z
I1
LD
KG
63 75 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630
3.8 4.5 5.4 6.6 7.4 8.3 9.5 10.7 11.9 13.4 17.8 16.6 18.7 21.1 23.7 26.7 29.7 33.2 37.4
90 104 122 150 165 185 203 230 250 280 315 345 385 430 485 535 595 660 745
230 235 245 250 255 255 260 270 290 300 310 320 340 350 380 380 400 420 450
30 30 30 30 30 30 30 30 30 40 40 40 40 40 40 40 40 40 40
130 135 135 135 135 145 145 145 165 165 175 175 195 195 205 225 225 250 265
0.7 0.9 1.2 1.8 2.1 2.7 2.9 4.0 4.7 6.1 8.2 9.6 12.3 15.2 21.5 23.3 31.1 38.1 53.7
63 75 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630
5.8 6.9 8.2 10.0 11.4 12.8 14.6 16.4 18.2 20.5 22.8 25.5 28.7 32.3 36.4 41.0 45.5 51.0 57.3
92 106 125 155 175 190 215 240 265 300 330 370 410 470 515 570 635 710 800
230 235 245 250 255 255 270 275 290 320 330 340 355 370 390 405 425 440 470
30 30 30 30 30 30 40 40 40 40 40 40 40 40 40 40 40 40 40
130 135 135 135 135 135 135 135 150 175 175 175 195 195 210 225 225 240 260
0.7 0.9 1.3 2.2 2.8 3.0 4.0 5.0 6.4 9.4 11.3 14.7 18.4 26.2 30.9 37.1 49.4 63.1 86.5
Prijzen op aanvraag / prix sur demande / prices on request
www.vink.be
VII - 707
steek- en uitzettingsmoffen manchons à emboitement et de dilatation plug and expansion socket joints
PE/PP-R
STEEKMOFFEN MANCHONS A EMBOITEMENT DOUBLE DOUBLE PLUG SOCKET JOINT Met lipring uit EPDM - Systeem 3S. Standaarduitvoering zonder stop. Opmerking: radiale kracht op de steekmof moet vermeden te worden. Avec joint à lèvres en EPDM - système 3S. Type standard sans butée. Remarque: le collier ne doit pas excercer une force radiale sur le raccord. With EPDM lip seal - system 3S. Standard type without stop. Remark: pipe clamp may not exert a radial force on the fitting.
SDR 17 / 17,6 d1
D
LD
Z
ds x b
BG
KG
110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630
145 165 185 205 230 250 280 315 345 385 430 485 535 595 660 745
120 120 120 130 130 135 145 145 150 160 175 185 200 200 235 255
360 360 360 380 390 400 420 430 450 470 500 530 560 560 640 680
129 x 45 144 x 45 164 x 45 184 x 55 205 x 55 230 x 55 256 x 55 386 x 55 321 x 65 362 x 65 408 x 64 455 x 75 515 x 75 575 x 75 640 x 75 720 x 75
125 x 40 140 x 40 160 x 40 180 x 50 200 x 50 225 x 50 250 x 50 280 x 50 315 x 60 355 x 60 400 x 60 457 x 70 521 x 70 -
2.3 2.9 3.7 4.3 5.5 6.3 8.2 11.1 12.9 16.4 21.2 28.3 34.0 42.3 57.0 78.5
BG = beugelgrootte / largeur du collier / size of clip Prijzen op aanvraag / prix sur demande / prices on request
www.vink.be
VII - 708
steek- en uitzettingsmoffen manchons à emboitement et de dilatation plug and expansion socket joints
PE/PP-R
STEEKMOFFEN MANCHONS A EMBOITEMENT DOUBLE DOUBLE PLUG SOCKET JOINT Met lipring uit EPDM - Systeem 3S. Standaarduitvoering zonder stop. Opmerking: radiale kracht op de steekmof moet vermeden te worden. Avec joint à lèvres en EPDM - système 3S. Type standard sans butée. Remarque: le collier ne doit pas excercer une force radiale sur le raccord. With EPDM lip seal - system 3S. Standard type without stop. Remark: pipe clamp may not exert a radial force on the fitting.
SDR 11 d1
D
LD
Z
ds x b
BG
KG
110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630
155 175 200 225 250 270 310 340 380 410 460 520 675 640 710 800
120 120 120 130 130 135 145 145 150 160 175 185 200 200 235 255
360 360 360 380 390 400 420 430 450 470 500 530 560 560 640 680
144 x 45 164 x 45 184 x 55 205 x 55 230 x 55 256 x 55 286 x 55 321 x 65 362 x 65 390 x 75 440 x 75 500 x 75 555 x 75 620 x 75 690 x 75 780 x 75
140 x 40 160 x 40 180 x 50 200 x 50 225 x 50 250 x 50 280 x 50 315 x 60 355 x 60 407 x 70 457 x 70 521 x 70 559 x 70 620 x 70 -
3.1 3.9 5.2 6.8 8.4 9.6 13.7 16.5 21.6 23.4 31.0 42.7 52.5 65.6 89.8 122.1
BG = beugelgrootte / largeur du collier / size of clip Prijzen op aanvraag / prix sur demande / prices on request
www.vink.be
VII - 709
mechanische koppelingen raccords mécaniques mechanical couplings
TEEKAY PN 2.5 - PN 25 Teekay koppelingen worden gebruikt bij de installatie van nieuwe leidingen en bij reparatie of onderhoud van bestaande installaties. Zij zijn bruikbaar voor het verbinden van de meeste types buis met gladde buitenwand van diam. 48 t.e.m. 4000 mm. Teekays zijn licht in gewicht en eenvoudig in gebruik.
TEEKAY
Les raccords mécaniques Teekay sont utilisés lors de l’installation de nouvelles conduites ainsi que pour la réparation et la maintenance de conduites existantes. Ils sont utilisables pour le raccordement de la plupart des types de tuyaux à paroi intérieure lisse, allant du diamètre 48 au diamètre 4000 mm inclus. Les raccords Teekay ou les ‘Teekays’ sont légers et d’emploi aisé. Teekay couplings are used for the installation of new pipelines and for the repair and maintenance of existing piping systems. They are suitable for joining most types of plain end pipes between 48 and 4000 mm in diameter. Teekays are light in weight and easy to install. Rechte koppelingen / raccords droit / straight couplings TYPE I Huis: RVS 304 Corps: Inox 304 Casing: SS 304
Bouten: verzinkt staal, PTFE gecoat Boulons: Acier zingué, enrobé de PTFE J Fasteners: steel, zinc & PTFE coated
Dichting: EPDM* oint: EPDM* Sealing: EPDM*
TYPE II Huis: RVS 304 Corps: Inox 304 Casing: SS 304
Bouten : RVS 316 L Boulons: Inox 316 L Fasteners: SS 316 L
Dichting: EPDM* Joint: EPDM* Sealing: EPDM*
TYPE IV Huis: RVS 316L Corps: Inox 316 Casing: SS316L
Bouten: RVS 316 L Boulons : Inox 316 L Fasteners: SS 316 L
Dichting: EPDM* Joint: EPDM* Sealing: EPDM*
304 = 1.4301 316 = 1.4401 316 L = 1.4404 op aanvraag / sur demande / on request : NBR / VITON
www.vink.be
VII - 710
mechanische koppelingen raccords mécaniques mechanical couplings
TEEKAY PN 2.5 - PN 25 (Vervolg / suite / continued)
TEEKAY
www.vink.be
ND
W1
W2
D2 OD=D1+D2
D3 OD=D1+D3
N
KG ST/PC
TOL. MAX. +/-
50 75 100 100 150 150 200 200 200 250 250 250 300 300 300 300 350 350 350 400 400 400 450 450 450 500 500 500 600 600 600 700 700 700 800 800 800 900
85 STD 85 STD 85 STD 110 XW 110 STD 140 XW 110 STD 140 XW 210 XW 110 STD 140 XW 210 XW 110 STD 140 STD 210 XW 310 STD 140 STD 210 XW 310 STD 140 STD 210 XW 310 STD 140 STD 210 XW 310 STD 140 STD 210 XW 310 STD 140 STD 210 XW 310 STD 210 STD 140 STD 310 STD 210 STD 140 STD 310 STD 210 STD
42 42 42 67 67 80 67 80 120 67 80 120 67 80 120 220 80 120 220 80 120 220 80 120 220 80 120 220 80 120 220 120 80 220 120 80 220 120
20 20 20 22 22 22 22 22 42 22 22 42 22 28 42 42 28 42 42 28 42 42 28 42 42 28 42 42 28 42 42 42 28 42 42 28 42 42
39 39 39 44 44 44 44 44 72 44 44 72 44 58 72 72 58 72 72 58 72 72 58 72 72 58 72 72 58 72 72 72 58 72 72 58 72 72
2 2 2 2 2 2 2 2 2/3 2 2 2/3 2 2 2/3 4 2 2/3 4 2 2/3 4 2 2/3 4 2 2/3 4 2 2/3 4 3 2 4 3 2 4 3
1.0 1.3 1.6 2.0 2.4 4.0 3.0 4.5 7.9 3.4 5.0 8.6 3.8 6.0 9.7 17.3 7.1 10.7 18.4 8.0 12.9 20.1 9.0 14.0 21.8 9.5 16.1 26.6 11.0 17.3 30.5 22.5 12.5 34.4 25.1 14.4 38.4 27.6
1.5 2.0 2.0 2.0 2.5 2.5 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.0 5.0 5.0 4.0 5.0 5.0 4.0 5.0 5.0 4.0 5.0 5.0 4.0 5.0 5.0 4.0 6.0 6.0 6.0 4.0 6.0 6.0 4.0 6.0 6.0
VII - 711
mechanische koppelingen raccords mécaniques mechanical couplings
TEEKAY PN 2.5 - PN 25 (Vervolg / suite / continued) ND
TEEKAY
www.vink.be
1000 1000 1100 1100 1100 1200 1200 1200 1300 1300 1400 1400 1500 1500 1600 1600 1700 1700 1800 1800 1900 1900 2000 2000 2100 2100 2200 2200 2300 2300 2400 2400 2500 2500 2600 2600 2700 2700 2800 2800 2900 2900 3000 3000
210 140 140 210 310 140 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310 210 310
W1
W2
D2 OD=D1+D2
D3 OD=D1+D3
N
KG ST/PC
TOL. MAX. +/-
STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD
120 80 80 120 220 80 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220 120 220
42 28 28 42 42 28 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 102 42 102 42 102 42 102 42 102 102 102 102 102 102 102 102 102 102 102 102
72 58 58 72 72 58 72 72 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102
3 2 2 3 4 2 3/6 4 6 8 6 8 6 8 6 8 6 8 6 8 6 8 6 8 6 8 6 8 6 8 6 16 12 16 12 16 12 16 12 16 12 16 12 16
30.2 16.8 18.0 38.3 50.1 19.5 41.3 54.0 47.7 63.9 50.5 67.9 53.2 71.8 56.5 75.7 59.8 79.6 62.3 83.5 65.2 87.5 68.1 91.4 70.9 95.3 73.9 99.2 75.9 103.1 79.8 118.4 87.5 122.3 92.9 126.3 96.2 130.2 98.7 134.1 109.6 138.0 121.1 141.9
6.0 6.0 4.0 6.0 6.0 4.0 6.0 6.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
VII - 712
mechanische koppelingen raccords mécaniques mechanical couplings
TEEKAY Andere types / autres types / other types STEPPED Teekay koppeling met assymetrische dichtingen waarmee twee buizen kunnen verbonden worden met een verschil in buitendiameter tot 25 mm. Leverbaar in drukklassen PN 2.5 - PN 16.
TEEKAY
Raccords Teekay aux joints assymétriques pour le raccordement de deux tubes avec une différence du diamètre extérieur jusqu’à 25 mm. Livrable en différentes classes de pression de PN 2.5 - PN 16. Teekay coupling with asymmetric sealing sleeves for joining two pipes with a difference in outside diameter of up to 25 mm. Supplied in all pressure classes from PN 2.5 - PN 16. REDUCER Om verschillen groter dan 25 mm op te vangen bij het verbinden van twee buizen, kunnen één grote en één kleine Teekay gebruikt worden in combinatie met een reductiestuk, in concentrische of excentrische uitvoering. Materiaal naar keuze. Connections de deux tubes avec une différence de diamètre extérieur plus grand que 25 mm, peuvent être réalisé avec une Teekay petite et une plus large, en combination avec une réduction concentrique ou excentrique. Matériel au choix. Differences in outside diameter greater than 25 mm may be accommodated by reducers, comprising one smaller and one larger Teekay connected by a reducer, either concentric or excentric. Material can be choosen. FLANGE Teekay koppeling aan één zijde voorzien van een vaste flens volgens DIN, ASA, ... Eveneens leverbaar in combinatie met een “Step” Teekay. Raccords Teekay avec une bride fixe d’un côté, suivant DIN, ASA,... Egalement livrable en combination avec un Teekay “Step”. Teekay coupling with fixed flange at one end, acc. DIN, ASA, ... Also available in combination with a “Step” coupling. REPAIR Reparatiekoppeling die volledig kan geopend worden, d.m.v. een scharnier. Eenvoudig in gebruik bij reparatie en/of vervanging van lekkende buizen en verbindingen. Leverbaar van 75-3000 mm. Raccord de réparation, pourvue d’une charnière qui permet une ouverture complète. Usage simple en cas de réparation de fuites et/ou remplacement de tubes. Livrable de 75-3000 mm. A fully opening coupling for repairing and/or replacing damaged or leaking pipes and joints. Easy to fit. Available from 75 mm up to 3000 mm. Eveneens leverbaar voor koper, stalen of dunwandige RVS buizen en Sprinkler systemen. Egalement livrables pour les tuyauteries en cuivre, en acier ou en acier inox à paroi mince ainsi que pour les systèmes Sprinkler. Also available for copper, steel or thin SS pipe or Sprinkler systems.
www.vink.be
VII - 713
modulaire schakeldichtingen joints modulaires modular seals
LINK SEAL®
LINK-SEAL
Link-Seal® is een systeem voor het afdichten van buisdoorgangen (door muren, plafonds, vloeren, schachtwanden en beschermbuizen). Het systeem bestaat uit een reeks, met bouten aan elkaar gekoppelde identieke rubber kernen, die na het aanbrengen tussen buis en wand-opening door middel van bouten en drukplaten worden opgespannen zodat een waterdicht systeem wordt gevormd. Drukdicht: tot 5 bar (TUV, Lloyd & Register) Original Link Seal® tot 3 bar (Lloyd & Register) Original Link Seal® Type BC en BS316 Link-Seal® est un système l’étanchéïté au niveau des passages de tuyaux à travers murs, plafonds, fourreaux, ... Link-Seal® est composé d’une série de maillons identiques en caoutchouc, assemblés les uns aux autres par des boulons afin de former une chaîne articulée. En réunissant les maillons extrêmes, on obtient un anneau autour du tuyau. L’anneau est ensuite glissé dans l’espace annulaire compris entre le tube et l’ouverture de la paroi. L’étanchéité est obtenu en serrant les boulons qui, munies de plaques de pression, permettent la compression des maillons en caoutchouc et leur dilatation radiale. Résistant à la pression: jusqu’à 5 bar (TUV, Lloyd & Register) Original Link Seal® jusqu’à 3 bar (Lloyd & Register) Original Link Seal® Type BC et BS316 Link-Seal® is the ideal system to form a water-tight seal between pipe and casing or hole. Link-Seal® is coposed of a series, with bolts linked together, identical rubber links which are tightened with bolts and pressure plates. The result is a water-tight sealing system. Pressure resistant: up to 5 bar (TUV, Lloyd & Register) Original Link Seal® up to 3 bar (Lloyd & Register) Original Link Seal® Type BC et BS316 TYPES Type
Rubber schakels Eléments d’étanchéïté Sealing elements
Drukplaat Pl. de pression Pressure plate
Bouten en moeren Boulonnerie Bolts and nuts
Gebruikstemperatuur Temp. d’utilisation Temperature range min.°C max.°C
BS 316 C S 316 O OS 316 T KTW
EPDM blauw/bleu/blue EPDM zwart/noir/black EPDM zwart/noir/black NITRILE groen/vert/green NITRILE groen/vert/green SILICONE grijs/gris/grey EPDM black - 55 SHORE
GR-PA GR-PA GR-PA GR-PA GR-PA ZS GR-PA
316 ZS 316 ZS 316 ZS 316
-40 -40 -40 -40 -40 -55 -40
SS SS SS SS
±80 ±80 ±80 ±70 ±70 ±204 ±80
GR-PA: glasvezel versterkt polyamide polyamide renforcées de fibres de verre glass reinforced polyamide ZS:
verzinkt staal acier électrozingué zinc galvanised carbon steel
SS:
roestvrij staal A4-70 : te gebruiken met anti-gripeervet acier inoxydable A4-70 : il faut appliquer un lubrifiant anti-grippante stainless steel A4-70 : to be used with anti-seize lubricating compounds
Type T: met cerficaat FM - 1 uur avec certificat FM - 1 heure with certificate FM - 1 hour Montagevoorschriften: beschikbaar op aanvraag en raadpleegbaar op onze website Instructions de montage : disponible sur demande et peuvent être consultés sur notre website Assembly instructions: available on request and can be consulted on our website
www.vink.be
VII - 714
modulaire schakeldichtingen joints modulaires modular seals
LINK-SEAL® vervolg / suite / continued
LINK-SEAL
Model Modèle
L
DIKTE EPAISSEUR THICKNESS
€/ST/PC
Normaal Opgespannen Non-serré Serré Free Expanded LS 200 LS 265 LS 275 LS 300 LS 310 LS 315 LS 325 LS 340 LS 360 LS 400 LS 410 LS 425 LS 440 LS 475 LS 500 LS 525 LS 575 *LS 615 LS 625 LS 650
30.0 41.0 25.6 41.0 57.5 38.4 79.8 41.4 55.1 93.1 67.6 93.1 99.0 68.6 99.8 99.8 79.5 155.5 106.7 106.7
12.7 16.0 16.0 18.0 18.0 21.1 23.2 25.5 32.0 36.3 37.0 28.4 44.0 41.3 60.3 55.4 48.0 81.6 83.0 69.0
15.7 20.0 20.0 22.5 22.5 26.0 30.0 34.0 42.0 46.0 48.5 37.0 55.0 48.5 71.5 63.5 58.0 98.0 98.0 84.0
C
S316
BS316
O
OS316
T
4.15 5.99 5.65 6.39 8.64 10.51 12.75 11.84 15.75 22.52 20.07 21.73 26.53 20.64 36.19 36.19 35.23 78.02 57.17
5.24 8.43 7.14 10.51 10.88 12.38 18.16 17.08 20.64 28.50 26.43 28.50 37.14 28.50 57.75 57.58 55.87 94.28 81.93
5.44 9.01 7.32 10.53 11.43 15.41 18.39 17.49 20.88 29.45 28.09 29.45 29.45 58.37 58.37 60.57 67.51 -
5.65 7.31 9.01 12.38 17.24 15.17 21.22 28.87 25.07 28.50 30.64 24.76 52.04 51.08 44.25 62.82
6.73 9.01 12.38 16.33 21.78 20.44 24.76 36.39 33.02 35.64 40.89 34.69 72.37 69.93 66.18 90.16
16.43
* niet geschikt voor PE buizen * ne convient pas pour les tubes en PE * not suitable for PE pipes Opmerking: Voor dunwandige kunststofbuizen gebruik Link Seal® blauw : BS 316 Remarque: Pour tuyaux plastiques à paroi mince, utilisez Link Seal® bleu: BS 316 Remark: For thin wall plastic pipes, use Link Seal® blue: BS 316
www.vink.be
VII - 715
35.00 29.28 39.89 87.95 81.11 93.97 120.40 111.72 106.42 106.42 208.04 208.04 208.04 -
muur hulzen manchettes à sceller wall sleeves
Bij de doorvoer van staal-, gietstaal-, koper- of kunststofbuizen door wanden, plafond of vloeren, zijn muurhulzen de ideale oplossing om deze buizen hydrostatisch af te dichten. Deze muurhulzen zijn gefabriceerd uit asbestvrije fasercement bestaande uit cement en glasvezel. Deze zijn: - corrosiebestendig - hoge stijfheid - hoge maatvastheid - binnenin glad - buitenzijde gerild (geen spiraal) - waterdicht onder druk - electrisch niet geleidend - niet brandbaar - zeer goed in verbinding met beton - getest door het MFPA Leipzig en gecertificeerd tot 5 bar In verbinding met Link-Seal of Compactdichting wordt een perfecte dichting gegarandeert. Leveringsprogramma van DN80 - 800 mm, lengte tem 1200 mm
DN/DI
Tol.
DA
80 100 125 150 201 250 300 350 400 450 500 600 700 800
+2/-1 +2/-1 +2/-1 +2/-1 +2/-1 +2/-1 +2/-1 +2/-1 +2/-1 +2/-1 +2/-1 +3/-2 +3/-2 +3/-2
120 140 165 190 250 300 350 400 460 510 570 670 780 880
Lors du passage de tubes en acier, fonte, cuivre ou matière synthétique à travers des murs, plafonds ou sols, les manchettes à sceller sont les accessoires appropriés afin d‘étancher ces tubes de manière hydrostatique. Les manchettes à sceller en fibre-ciment consistent une fibre-ciment pure exempte d’amiante aux avantages suivants: - ininflammable - diélectrique - résistante à la corrosion - paroi intérieure lisse - haute stabilité dimensionnelle - rainure extérieure périphérique (pas de spirale) - bonne adhérence au bâtiment - approuvée par MFPA Leipzig jusqu’à 5 bar Utilisées avec le Link-Seal ou le Compact, ces pièces assurent une étanchéité parfaite en passage de cloison. Programme de livraison: DN 80 à DN 800 dans chaque découpe jusqu’à 1200 mm Asbestos-free fibre cement wall sleeves are - in connection with PSI Compact seals - the right accessory to seal pipes hydrostatically, whenever, steel, cast iron, copper or plastic pipes pass through walls, ceillings or floors. Asbestos-free fibre cement, consisting of concrete and glass-fibre, colour light grey. Material class A1 according to DIN EN13501-1 - corrosion resistant - leak-proof against pressure water - electrically insulated - non-inflammable - high stability - good compound with concrete - able to be coated - outer creasing circular - not helical, - smooth inner walls - high stability Split version for subsequent available, all lengths from ND 80-800 sizes up to max. 1,200 mm available. Fonction and compound of the wall sleeve with the concrete is cerfified by MFPA-Leipzig and accredited up to 5 bar. In connection with our original Link-Seal or Compakt seals, an absolute pressure water leak-proof sealing occurs in the annular space between the fibre cement wall sleeve and the casing pipe.
www.vink.be
VII - 716
buizen tuyaux pipes
COMPACT PLUS
COMPACT PLUS
Compakt Plus is een systeem voor het afdichten van muurdoorgangen van gas- en waterleidingen. Compakt Plus is eveneens geschikt voor het afdichten van muurdoorgangen van kabels. Het systeem bestaat uit een rubberelement dat aangedrukt wordt tussen 2 metalen schijven. Compakt Plus dicht de ringvormige ruimte tussen de buis en de ruimte in de muur. Drukweerstand : 2 bar Drinkwatergeschikt Temperatuursbereik : -30°C tot +120°C Boring in de muur : 70 – 250 mm Andere uitvoeringen tot 2200 mm op aanvraag Compakt Plus est un système d’ étanchéité pour tous les tuyaux de gaz ou de l’eau ou câbles en passage de cloison. Le système est construit d’un élement en caoutchouc qui est compressé entre 2 disques métalliques et assure l’étanchéité de l’espace annuaire entre le tube et le paroi. Résistance à la pression : 2 bar Qualifié pour l’eau potable Températures : de -30°C jusqu’à +120°C Percage dans le mur : 70 – 250 mm Autres exécutions jusqu’à 2200 mm: sur demande Compakt Plus is a system to offer the sealing for wall opening of gas and water pipes as well as for cables. The system exists out of a rubber element that’s compressed between 2 metallic discs. Compakt Plus seals the annular space between the carrier pipe and the core drilled hole. Pressure tightness : 2 bar Drinking water approved Temperature range : -30°C up to +120°C Wall opening : 70 - 250 mm Other performances until 2200 mm on request
www.vink.be
Boring in de muur Percage dans le mur Wall opening
Diameter buis Diamètre de tuyau Diameter pipe
80 80 100 100 100 125 125 150 150 200 200
20 – 28 32 – 40 32 – 40 36 – 44 46 – 56 55 – 64 70 – 78 79 – 91 98 – 110 108 – 115 116 - 126
VII - 717
€/ST/PC
53.33 53.33 76.00 76.00 76.00 106.28 106.28 151.87 151.87 227.61 227.61
afdichtingskussens coussins d’étanchéité pipeline plugs
Afdichtingskussens zijn geschikt voor het tijdelijk afsluiten van leidingspunten om reparatie- en/ of onderhoudswerken mogelijk te maken, zonder de buizen volledig te laten leeglopen. Les coussins d’étanchéité sont convenable pour barrer des tuyaux temporairement, en cas de réparations ou des travaux de maintenance, sans vider les tuyaux entièrement. Pipeline Plugs are suitable to temporarily seal of a piping system in case of repair or maintenance jobs, without draining the pipes completely.
www.vink.be
VII - 718
buizen tuyaux pipes
SAFETY SHIELDS Safety Shields zijn schilden in kunststofdoek of metaal, die rond leidingonderdelen geplaatst worden, zodat bij eventuele breuk van een dichting, gevaarlijke producten niet onder hoge druk kunnen ontsnappen. “Spray-outs” van deze producten kunnen immers ernstige verwondingen of materiaalbeschadiging veroorzaken. Safety Shields voorkomen deze “Spray-outs” en dragen zo bij tot een betere bedrijfsveiligheid.
SAFETY SHIELDS
Les Safety Shields sont des garants en toile synthétique ou métallique qui se placent autour des raccords de tuyauteries et qui, lors d’une fuite éventuelle, empêchent l’échappement de produits dangereux sous haute pression. En effet, les “Spray-outs” de certains produits peuvent provoquer des blessures graves et des détériorations aux installations. Les Safety Shields préviennent ces “Spray-outs” et contribuent ainsi à une meilleure sécurité sur les lieux de travail. Safety shields are shields in plastic cloth or metal which are placed around parts of piping systems in order to prevent in case of rupture, the escape of dangerous products at high pressure. “Spray-outs” of these products could cause serious injuries and material damage. Safety Shields prevent these “Spray-outs” and therefore contribute to a safer working environment. SPRA-GARD Verschillende lagen waarvan één extreem sterk kunststofweefsel met hoge drukbestendigheid en vormvastheid. Voorzien van pH indicator. Différentes couches dont une en fibres synthétiques extrêmement solides, très résistants à la pression et stables structurellement. Pourvu d’un indicateur pH. Several layers from which one strong plastic cloth with high pression resistance and form stability.Provided with pH indicator. Mat.: PVDC t°max.: 80 bar max.: 70 PPL 105 75 TFE + GRP 230 115 (GRP: glasweefsel / fibres de verre / glass cloth) ECONO-GARD Verschillende lagen kunststofweefsel (PVC of PE) met in het midden van iedere laag een stuk textieldoek. Voorzien van pH indicator. Différentes couches de fibres synthétiques (PVC ou PE) avec au milieu de chaque couche une bande de toile filée. Pourvu d’un indicateur pH. Several layers of plastic cloth (PVC or PE) with in the middle of every layer a piece of spinned textile cloth. Mat.: PE t°max.: 60 bar max.: 24 PVC 60 30 VUE-GARD Transparant. Geschikt voor gebruik bij meet- en regelapparatuur. Transparent. Convient pour l’usage avec appareils de mesure et de régulation. Transparent. Suitable for use with measurement equipment. Mat.:
www.vink.be
TFE +GRP t°max.: 150 bar max.: 70 (GRP: glasweefsel / fibres de verre / glass cloth) Transparant deel / Partie transparent / Transparent part = ECTFE
VII - 719