Features and benefits: Laser engraving mobile systém for engraving of big moulds Replaces CNC EDM and micro-milling New way of laser head clamping New Motor travel X,Y,Z Remote control of system HCP20 More mobile and smaller metal box Easy of use with LIGHTER software
Inprovement of HCP20 in comparison with HCP10:
-
New way of laser head clamping to optimise its rotating to work position . Improved focusing of laser head on the working area by using two red points. Ethernet connection with superior PC (notebook is advantage) allows to prepare data far from laser (without laser) or to use remote control of system HCP20. Optimalization of working box designed for storing of the whole laser system. The box is smaller, more mobile and also adapted for loading to car and moving in a hall. It is equipped with rotary drum for careful placing of laser head and optical cable. Manual travel X, Y, Z for quick setting of laser head working position. Motor travel X,Y,Z for very precise moving of laser head to work position. KEY button on the control board allows to lock the axis in the chosen place without any aberration. Block of power supply of clamping magnet is newly equipped except UPS function also with acoustic alarm for line voltage fault. HCP20 meets the hardest demands for mobile, quick and precise engraving of the large tools and molds. Frequent moving and visiting our customers is now without any problem and risk.
HCP 20 - specification Nominal power Pulse emergy (max.) Peak power (max.) Max. power Input voltage Imput current Head cable lenght Laser source Emission of radiation Wavelength Modulation Aiming Beam Temperature range - operative Temperature range - storing Cooling Marking speed Objective F-Theta mm Working distance mm Working area (mm x mm)
63S 72 35x35
HCP 20 - 20W 20 W 1000 μJ 10 kW 300W 100 do 240V 3 do 1,25A max 3 m standard Fiber laser Pulsed 1060-1080 nm 20 kHz ÷ 100 kHz 1 mW @ 635 nm 5°C do 50°C -10°C do 60°C Forsed Air Up to 2000mm/sec
100S 113 50x50
160S 177 100x100
HCP 20 - 30W 30W 1000 μJ 10 kW 300W 100 do 240V 3 do 1,25A max 3 m standard Fiber laser Pulsed 1060-1080 nm 30 kHz ÷ 100 kHz 5 mW @ 635 nm 5°C do 40°C -10C do 60°C Forsed Air Up to 2000mm/sec
254S 280 140x140
100L 97 60x60
160L 175 110x110
HCP 20 - 50W 50W 1000 μJ 12 kW 300W 100 do 240V 3 do 1,4A max 3 m standard Fiber laser Pulsed 1060-1080 nm 50 kHz ÷ 100 kHz 5 mW @ 635 nm 10°C do 35°C -10C do 60°C Forsed Air Up to 2000mm/sec 254L 297 180x180
330L 387 220x220
HCP20 complies with the strictest requirements and criteria for mobile, fast and precise work for large engraving tools and molds. Frequent moving or commuting with laser engraving system to the customer is now without problems and risks.
Examples of use: Engraving grid in aluminum
Engraving directional light
Engraving homologation describe of light in car
Engraving of mould
Features and benefits: Ultra compact laser head Low power consumption High quality marking and precision New portable and storable device in elegant box Easy of use with LIGHTER software Built-in encoder for smooth engraving Manual feed
HCP 10
is the ultra compact pulsed fiber laser offering first class performance and advanced
software features. Thanks to state-of- the-art technology HCP 10 allows fast marking on metal and plastic material increasing systems productivity typical for automotive and electronics industry. Ultra compact dimension allows ease mechanical installations in the production line or inside a machines where limited space is always a key issue. With the smallest scanning head of the market place (112x298x90 mm), HCP 10 drastically simplifies systém design and machine integration. Available with 10W and 20W laser power emission, HCP 10 is very simple to set up and to parameterise using Lighter software suite. Thanks to Lighter ease of use HMI, operator can design any kind of label, with logo, text, datamatrix, bar codes. HCP 10 implements Embedded Marking Controller (EMC) for complete system control in “Stand Alone Mode” or “Master –Slave Mode”. HCP 10 is equipped with up to 4indipendent axys controls ( X,Y,Z, rotative axys) to implement MultiLayers and Rotating Marking and to change marking head position.Dedicated encoder input is applied for Marking On Fly even in accelerated and un-costant speed conditions. Low Power consumption and excellent power efficiency are classified at top in its category.
Elegant and compact portable box HCP Fiber Laser System in the portable box is equipped with all the necessary components to get to any place quickly. Simple and quick installation allows to mark light and small parts on the table of the box.We mark big pressing moulds by strong electromagnet that is fixed to a mould and positioning system.
HCP 10 - specification Nominal power Pulse emergy (max.) Peak power (max.) Max. power Input voltage Imput current Head cable lenght Laser source Emission of radiation Wavelength Modulation Aiming Beam Temperature range - operative Temperature range - storing Cooling Marking speed Objective F-Theta mm Working distance mm Working area (mm x mm)
63S 72 35x35
HCP 10 - 20W 20 W 1000 μJ 10 kW 300W 100 do 240V 3 do 1,25A max 3 m standard Fiber laser Pulsed 1060-1080 nm 20 kHz ÷ 100 kHz 1 mW @ 635 nm 5°C do 50°C -10°C do 60°C Forsed Air Up to 2000mm/sec
100S 113 50x50
160S 177 100x100
HCP 10 - 30W 30W 1000 μJ 10 kW 300W 100 do 240V 3 do 1,25A max 3 m standard Fiber laser Pulsed 1060-1080 nm 30 kHz ÷ 100 kHz 5 mW @ 635 nm 5°C do 40°C -10C do 60°C Forsed Air Up to 2000mm/sec
254S 280 140x140
100L 97 60x60
160L 175 110x110
HCP 10 - 50W 50W 1000 μJ 12 kW 300W 100 do 240V 3 do 1,4A max 3 m standard Fiber laser Pulsed 1060-1080 nm 50 kHz ÷ 100 kHz 5 mW @ 635 nm 10°C do 35°C -10C do 60°C Forsed Air Up to 2000mm/sec 254L 297 180x180
330L 387 220x220
The various parts of the laser can interact with the marking system. Marking set consists of two parts: PCI electronic board (iMarkPCI) that ensures control signals flow to the laser and an efficient software (Lighter) that provides graphical user interface for marking designs and marking process automation. Graphic editor of software Lighter creates and edits strings, shapes, barcodes, matrix codes. It is also able to import logos in raster and vector format.
Examples of use:
MEPAC VŽDY NĚCO NOVÉHO Pro naše zákazníky máme velkou škálu produktů pro přesné strojírenství od nástrojů po přístrojovou techniku, laserové systémy. Veškeré naše produkty můžete také zakoupit na našem e-shopu wwww.mepac-eshop.cz. Naši obchodní zástupci nabízejí odborné poradenství v oblasti přesného strojírenství, ale také kompletní sortiment našeho zboží v pojízdných prodejnách. V sekci prodeje přístrojů a nástrojů zastupujeme na Českém, Slovenském a Polském trhu, 17 zahraničních firem.
Veškeré naše zboží zakoupíte na www.mepac-eshop.cz
MEPAC CZ, s.r.o.
tel. /mob. /fax
e-mail
Central office TŘINEC Oldřichovice 862 739 61 Třinec www.mepac.cz
tel.: mob.: mob.: mob.:
[email protected]
Branch office – VSETÍN Průmyslový areál Jasenice objekt 6 755 01 Vsetín
tel.: 571 417 771 mob.: 739 075 567 mob.: 739 366 619 mob.: 739 453 809 mob.: 608 710 904
Branch office – VRBNO Zlatohorská 648 739 26 Vrbno p. Pradědem
tel.: 554 725 305 mob.: 603 507 946 (shop) mob.: 739 204 755 (shop) mob.: 775 569 917 (workshop) fax: 554 725 035
[email protected]
Branch office – POLSKO Czechowice - Dziedzice
tel.: 0048 910 085 519 mob.: 0048 513 041 157
[email protected]
MEPAC SK, s.r.o. Kotešová 817 013 61 Kotešová (okres Bytča) www.mepac.sk
tel.: 00421 910 082 933 mob.: 00421 917 120 075 mob.: 00421 905 910 944
558 348 112 603 515 357 (shop) 776 086 591 (shop) 773 784 101 (workshop) (production) (production) (shop) (shop)
[email protected]
[email protected]
Věříme, že i Vaše firma najde v našem bohatém sortimentu užitečné přístroje či nástroje pro Vaši práci. kolektiv firem MEPAC CZ, s.r.o. a MEPAC SK, s.r.o.
