Packet Tracer Skill Integration Challenge 6.4.1

Packet Tracer Skill Integration Challenge 6.4.1 - 01-04-2016 by webmaster - Blog Mahasiswa Akademi Telkom Jakarta - http://umarrokhimin.student.akademitelkom.ac.id

Packet Tracer Skill Integration Challenge 6.4.1 by webmaster - Monday, January 04, 2016 http://umarrokhimin.student.akademitelkom.ac.id/index.php/2016/01/04/packet-tracer-skill-integrationchallenge-6-4-1/ Required : Packet Tracer v6.0.1.0011 or above

**Aturan Main Terapkan konfigurasi basic router Konfigurasi dynamic dan routing default Dirikan layanan bekerja secara jarak jauh Uji sambungan sebelum ACL dikonfigurasi Terapkan pengaturan ACL Uji sambungan setelah ACL dikonfigurasi

1. Tambahkan perangkat WAN Tambahkan 1 perangkat DSL dan 1 perangkat Cable modem sesuai dengan topologi diagram dibawah 2. Gunakan Config tab dan ubah nama tampilannya tiap perangkat WAN ke “Cable” dan “DSL”, saja

1 / 14


3. Terapkan konfigurasi router basic Gunakan informasi dalam diagram topologi dan pengalamatan, konfigurasi dasar perangkat di R1, R2, dan R3, Namanya terserah Ikuti dibawah ini : Console dan Vty Lines Banner Disable domain name lookup Interface description R1 -----------------------------------------------------R1>ena R1#conf te Enter configuration commands, one per line. End with CNTL/Z. R1(config)#line con 0 R1(config-line)#password cisco R1(config-line)#login

2 / 14


R1(config-line)#exit R1(config)#line vty 0 4 R1(config-line)#password cisco R1(config-line)#login R1(config-line)#exit R1(config)#banner motd "Welcome to Router R1" R1(config)#no ip domain-lookup R1(config)#int s0/0/0 R1(config-if)#description line to cloud-PT R1(config-if)#exit R1(config)#int f0/0 R1(config-if)#description fastethernet LAN R1(config-if)#exit R1(config)#

3 / 14


R2 -------------------------------------------------------------R2>ena R2#conf te Enter configuration commands, one per line. End with CNTL/Z. R2(config)#line con 0 R2(config-line)#password cisco R2(config-line) login R2(config-line)#exit R2(config)#line vty 0 4 R2(config-line) password cisco

4 / 14


R2(config-line) login R2(config-line)#exit R2(config) banner motd "Welcome to Router R2" R2(config)#no ip domain-lookup R2(config)#int s0/0/0 R2(config-if)#description line to cloud-PT R2(config-if)#exit R2(config)#int s0/1/0 R2(config-if)#description line to ISP R2(config-if)#exit R2(config)#int f0/0 R2(config-if)#description line to LAN R2(config-if)#exit R2(config)#

5 / 14


R3 -------------------------------------------------------R3>ena R3#conf te Enter configuration commands, one per line. End with CNTL/Z. R3(config)#line con 0 R3(config-line) password cisco R3(config-line) login R3(config-line)#exit R3(config)#line vty 0 4 R3(config-line) password cisco R3(config-line) login

6 / 14


R3(config-line)#exit R3(config) banner motd "Welcome to Router R3" R3(config)#no ip domain-lookup R3(config)#int s0/0/0 R3(config-if)#description line to cloud-PT R3(config-if)#exit R3(config)#int f0/0 R3(config-if)#description line to LAN R3(config-if)#exit R3(config)#

4. Konfigurasi routing secara default di R2

7 / 14


R2(config)#ip route 0.0.0.0 0.0.0.0 s0/1/0

5. Konfigurasi dynamic routing

R1 -------------------------------------------------R1(config)#router rip R1(config-router)# version 2 R1(config-router)# network 10.1.1.0 R1(config-router)# network 192.168.10.0 R1(config-router)# passive-interface f0/1 R1(config-router)# no auto-summary R1(config-router)# exit

8 / 14


R1(config-router)#

R2 -----------------------------------------------R2(config)#router rip R2(config-router)# version 2 R2(config-router)# network 10.1.1.0 R2(config-router)# network 192.168.20.0 R2(config-router)# default-information originate R2(config-router)# passive-interface s0/1/0 R2(config-router)# passive-interface f0/1 R2(config-router)# no auto-summary

9 / 14


R2(config-router)# exit R2(config-router)#

R3 ---------------------------------------------------R3(config)#router rip R3(config-router)# version 2 R3(config-router)# network 10.1.1.0 R3(config-router)# network 192.168.30.0 R3(config-router)# passive-interface f0/1 R3(config-router)# no auto-summary R3(config-router)# exit R3(config-router)#

10 / 14


6. Terapkan aturan ACLnya Implementasi di pengaturan ACL menggunakan nomor 101 Izinkan host di jaringan 192.168.30.0/24 akses web ke semua tujuan Izinkan host di jaringan 192.168.30.0/24 ping ke semua tujuan Tolak semua akses lain yang mengarah ke jaringan tersebut

R3 R3(config)#access-list 101 permit tcp 192.168.30.0 0.0.0.255 any eq www R3(config)# access-list 101 permit icmp 192.168.30.0 0.0.0.255 any R3(config)# access-list 101 deny ip any any R3(config)#int fa0/1 R3(config)#ip access-group 101 in

11 / 14


R3(config)#exit R3(config)#

7. Konfigurasi nama ACL FIREWALL

dengan mengikuti

Izinkan TW-DSL akses web ke server intranet Izinkan TW-CABLE akses web ke server intranet Izinkan hanya reply ping dari ISP dan sumber di luar ISP Izinkan hanya mendirikan sesi TCP dari ISP dan sumber di luar ISP Blok semua akses yang masuk dari ISP dan sumber di luar ISP

R2 R2(config)#ip access-list extended FIREWALL R2(config-ext-nacl)#permit tcp host 192.168.1.10 host 192.168.20.254 eq www

12 / 14


R2(config-ext-nacl)#permit tcp host 192.168.2.10 host 192.168.20.254 eq www R2(config-ext-nacl)#permit icmp any any echo-reply R2(config-ext-nacl)#permit tcp any any established R2(config-ext-nacl)#deny ip any any R2(config-ext-nacl)#int s0/1/0 R2(config-if)#ip access-group FIREWALL in R2(config-if)#exit R2(config-if)#

Seharusnya sudah 100% terselesaikan, jika belum kalian bisa cek result apa saja yang sekiranya belum di selesaikan.

Download hasil pka 6.4.1

13 / 14


Terima Kasih........ _______________________________________________ PDF generated by Kalin's PDF Creation Station

14 / 14 Powered by TCPDF (www.tcpdf.org)

Packet Tracer Skill Integration Challenge 6.4.1

Recommend Documents