3. ročník mezinárodní konference 21. - 23. září 2011 Brno, Česká republika, EU
Instrukce pro autory přednášek a posterů Vážené dámy, vážení pánové, Sborník se skládá z tištěné formy seznamu přednášek a posterů s abstrakty a CD-ROMu obsahujícího celé texty přednášek/posterů. Níže najdete pokyny (vzhled, styl a formát) k článkům a prezentacím. Abstrakt/Přednáška - Všeobecné pokyny Abstrakt by měl být zaslán v angličtině. Prosím použijte textový editor MS Word, ve formátu A4, 20 mm okraje na všech stranách a řádkování 1.2. Požadovaná délka abstraktu je do 250 slov, délka článku by měla být maximálně 6 stran včetně obrázků. Prosím zasílejte nám abstrakt/článek formátovaný dle níže uvedené šablony s názvem - „Pokyny pro přípravu textu příspěvku jako tiskové předlohy pro CD sborník“ viz str. 2, 3. Prezentace - Všeobecné pokyny Prezentace by měla trvat cca 12 minut + diskuse 3 min. Prosím držte se uvedených instrukcí pro prezentace na str. 4 Poster - Rozměr posteru je 120cm (výška) x 80cm (šířka) max. Chtěli bychom Vás informovat, že na konferenci je možné se přihlásit a plné texty přednášek/posterů zaslat nejpozději do 15. srpna 2011. Program konference a další informace budou uveřejněny během srpna 2011 na webových stránkách konference. Pro Vaši informaci jsou poplatky následující: Autoři přednášek a posterů Ostatní účastníci Doktorand, student denního studia
4.900,-Kč (vč. DPH) 5.500,-Kč (vč. DPH) 3.500,-Kč (vč. DPH)
Vložné obsahuje organizační náklady spojené s pořádáním konference, náklady vydání sborníku, společné stravování. Ubytování si hradí účastníci sami. Přednáška/poster nebude publikována v konferenčním jednání bez uhrazení patřičných poplatků. Úhrada vložného musí být provedena nejpozději do 31. 8. 2011 V případě jakýchkoliv dotazů, prosím kontaktujte sekretariát.
S pozdravem
TANGER, spol. s r.o. Keltičkova 62, 710 00 Ostrava 10, Česká Republika
Ing. Kateřina Sanetrníková manažer konference
Tel: + 420-595 227 121, Fax: + 420-595 227 110 E-mail:
[email protected] Web: www.Nanocon.cz
21. - 23. 9. 2011, Brno, Czech Republic, EU
DIRECTIONS ON ONE'S BEHALF PREPARATION TEXT BENEFIT LIKE PRINTING MODEL FOR CD MEMORIAL VOLUME František MLYNAR a, Jan PROCHAZKA b a
b
OMEGA, a. s., Myslbekova 12, 706 02 Ostrava - Vitkovice, Czech Republic, EU, E-mail address
VÍTKOVICE, a. s., Pohranicni 20, 706 02 Ostrava - Vitkovice, Czech Republic, EU, E-mail address
Abstract Please use the Arial font with height of 11 points bold type for the paper name and 11 points for the name of author, 10 points italic for the place work of authors - please centre it. For text part use 10 points and spacing 1.2 and align the text in block. The recommended length of a paper is up to 6 pages of text, including pictures. Keywords: direction, memorial, volume
SECTION We recommend to split the text to numbered sections and subsections, for example 1.1, 1.2 etc. It is recommended to use 1.2 line spacing. However, when using more complicated mathematical formulas, it is necessary to extend slightly the space between lines so that the upper and lower index fonts are legible. The text should be typed in such a way to complete the given frame entirely. There are only two exceptions from this rule: (i) do not start to type the new chapter name on the last line, (ii) you may exceed the frame only by one line at the bottom, to complete a paragraph. Use the italic type to highlight some text. 1.1
Subsection
Please use the Arial font with size 10 points in subsections. 1.2
Proceedings papers
Proceedings papers will be issued: •
on paper, abstracts according to the authors and breakdown by symposia
•
in electronic form on CD-ROM - full text papers including images.
Having regard to the electronic form of proceedings is possible to include color images and graphs as well. Please page on bottom in the middle and use the specific header and footer for writing paper. In the case of very larger file (tens of megabytes), please compress it. For sending please use www.nanocon.cz conference system..
EQUATIONS Equation must start directly on the left-hand edge, and their implementation should be similar to the following example: Using a slash ( / ) in equations is not desirable, though it is possible to use −Q n sinh (α σ p ) it on a text line. Physical quantities must be typed according to the valid RT
ε& = A exp
standards.
21. - 23. 9. 2011, Brno, Czech Republic, EU
TABLES AND ILLUSTRATIONS It is recommended to place tables and illustrations into the text, on the page with the first notice or reference, if possible. In case of a table, leave two lines, type Table 1., the name of a table on a new line, then leave one more line and place a table. If the table is too long, please repeat its number on the 513pref Eg - 0.539 eV following page again, together 513p750 513p850 with headings for individual columns. PL Intensity (arb. units)
30
3K
? ~Eg-0.12 eV Eg -0.7 eV 10
x 10
0.75
1.00
1.25
1.50
Energy (eV)
Illustrations have to be original or quality scanner. We will not accept bad photocopy. Please type a number Fig. 1. and text under the illustration on same row. Descriptions for illustrations should be clear and legible. We assume computer insert lines, graphs and their input by runaround. Illustrations and graphs must be part of a paper. If you have any questions, please write to email:
[email protected].
Fig 1. Effect of samples thermal treatment on PL spectra. Table 1: Material variants of bimetallic layered castings Number of variant 1
Bearing part
2
Pearlitic grey cast iron with flake graphite
3
Ferritic-pearlitic carbon cast steel
4
Working part (layer) Monolithic insert: plate from ferritic alloy steel X8Cr 13 Monolithic insert: plate from austenitic alloy steel X810CrNi 18-8 Monolithic insert: plate from austenitic alloy steel X810CrNi 18-8 Granular insert: powder of Ni base alloy
ACKNOWLEDGEMENTS Please use the Arial font with height of 10 points bold and italic tipe for the place work of authors please centre it. LITERATURE References to sources used should be placed immediately below end of main text. Do not start on a new page it is not needed. References to the literature highlight the text in Arabic numbers, number continuously and include the reference numbers in order as they appear in the text. Please write the references according to the standard bibliographic citations of which are four basic examples in the quide.
21. - 23. 9. 2011, Brno, Czech Republic, EU
POKYNY PRO PŘÍPRAVU PREZENTACE V POWERPOINTU Předání prezentací Prezentace článku v PowerPointu vložte do systému konference na www.nanocon.cz nejpozději do 20. 9. 2011. Prezentace můžete také nahrát osobně u obsluhy dataprojektoru půl hodiny před začátkem jednání v den Vaší přednášky. Soubor pojmenujte prijmeni_nazev konference: napr. Novak_NANOCON2011 Podporované formáty prezentace: ppt
- PowerPoint Presentation (MS Office 2000 a 2003 - PowerPoint)
pptx - PowerPoint Presentation (MS Office 2007 - PowerPoint) pdf
- (Adobe Acrobat Reader)
Požadavky na prezentaci Prezentace musí být přehledná a čitelná. Velikost písma pro nadpisy 40, pro základní text cca 30, minimálně 20. Obrázky, grafy či tabulky i s jejich popisem by měly být ostré a viditelné i z větší vzdálenosti. Osnova prezentace Úvodní stránka: název článku, autor a spoluautoři Cíle a předpokládané praktické využití Úvod do řešené problematiky Teoretické základy Metodika zpracování Harmonogram prací Výsledky, závěry Přehled použitých dat, programů, přehled literatury a použitých zdrojů
Vhodná prezentace
Velký čitelný text, obrázek, základní informace
Nevhodná prezentace
Mnoho textu, malé písmo
21. - 23. 9. 2011, Brno, Czech Republic, EU
Text i graf čitelný
Text i obrázek čitelný
Tabulka i graf velmi špatně čitelné
Texty v tabulkách nečitelné