Bilfinger Industrial Services Czech s.r.o.
Prezentace společnosti Bilfinger Industrial Services Czech s.r.o. 2016
OBSAH
Profil společnosti
Organizační schéma společnosti
Historie
Certifikáty společnosti
Historie počtu zaměstnanců a obratu
Struktura zaměstnanců
Hlavní činnosti společnosti
Rámcové smlouvy na údržbu se společnostmi
Významní zákazníci
Závěr Strana 2
PROFIL SPOLEČNOSTI
Název společnosti:
Bilfinger Industrial Services Czech s.r.o.
Sídlo společnosti:
Václava Řezáče 313, 434 01 Most
IČ:
47784709
DIČ:
CZ 47784709
Právní forma:
společnost s ručením omezeným
Registrace:
Krajský soud v Ústí nad Labem, oddíl C, vložka 4175
Datum zápisu:
11. ledna 1993
Telefon:
+420 476 456 602
Fax:
+420 476 456 603
Email:
[email protected] Strana 3
Organizační schéma společnosti Bilfinger Industrial Services Czech s.r.o.
Vlastník společnosti Bilfinger SE
100 %
Jednatelé společnosti Ing. Martin Krbec Ing. Václav Zahradníček Ing. Jan Šlapal Generální ředitel
Ředitelé divizí
Obchodní ředitel
Finanční ředitel
Svářecí škola
Údržba Pradubice
Servis
Výroba
Údržba I
Montáže
Lešení
Technický ředitel
Konstrukce
Izolace a nátěry
Realizace a příprava staveb
NDT
Rotační stroje
Údržba II Strana 4
HISTORIE
2014
Vlastníkem se stává společnost Bilfinger SE
2013
Změna názvu společnosti na Bilfinger Industrial Services Czech s.r.o.
2011
Změna názvu mateřské společnosti na Bilfinger Industrial Services GmbH
2011
Začlenění společností CHEMOPETROL CHEMBUILD s.r.o., SI UNIMONTEX s.r.o. a BIS Engineering s.r.o. do společnosti BIS Czech s.r.o.
2009
Vlastníkem se stává společnost Bilfinger Berger Industrial Services
2007
Začlenění do skupiny BIS, změna názvu společnosti na BIS Czech s.r.o.
2006
Akvizice společnosti SI UNIMONTEX s.r.o.
2002
Začlenění do skupiny R & M Technische Dienstleistungen GmbH
2001
Akvizice společnosti MONTPETROL s.r.o.
1999
Akvizice společností BRAMZ a CHEMBUILD
1994 - 1997
Akvizice společností MONTECH a NOVITAS
1993
Založení společnosti UNIMONTEX s.r.o. Strana 5
Certifikáty společnosti
ISO 9001:2009
TÜV SÜD Czech
ISO 3834-2:2006
TÜV SÜD Czech
ISO 14001:2005 3834 - 2:2006
TÜV SÜD Czech
ČSN EN 1090-1:2009
TÜV SÜD Czech
OHSAS 18001:2008
TÜV SÜD Czech
Strana 6
Historie počtu zaměstnanců a obratu Počet zaměstnanců
Obrat (mil. EURO) 80
1230
1200
70,3
1210 1200
1048 1060 1056
1050
70
1155 1140 1160
1120
74,4
1045
995
987
66,5 58,1 56,5
60 960
52,7 890
54,7 51,8 51 51,4
50 44 43,6
757
40,2
695
40
42,8 40,2
35,4
30 23,6
417
20
15,9
18,519,3
200 150
2,2
0 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
40
1993
6,7 7,6
10
Strana 7
Struktura zaměstnanců
27,70%
Dělníci
Administrativní pracovníci
72,30%
Strana 8
Vývoj a rozložení obratu
OBRAT 2002
OBRAT 2015 9%
10%
26%
36%
64%
Údržba
Projekty
Výroba
55%
Údržba
Projekty
Výroba Strana 9
LTIF (Lost Time Incident Frequency) – Pracovní úrazovost
Strana 10
Hlavní činnosti společnosti • KOMPLEXNÍ STROJNÍ ÚDRŽBA • REALIZACE INVESTIČNÍCH PROJEKTŮ • MONTÁŽE POTRUBNÍCH SYSTÉMŮ • MONTÁŽE STROJŮ A ZAŘÍZENÍ • MONTÁŽE OCELOVÝCH KONSTRUKCÍ • STROJNÍ VÝROBA (tlakové nádoby, aparáty, výměníky, obrobky, svařence)
• SERVIS ROTAČNÍCH STROJŮ • SERVIS PARNÍCH TURBÍN • IZOLACE A NÁTĚRY • LEŠENÍ • NEDESTRUKTIVNÍ ZKOUŠKY • OSTATNÍ SLUŽBY (engineering, konstrukce a projekce, svářečská škola, autodoprava) Strana 11
KOMPLEXNÍ STROJNÍ ÚDRŽBA Naše společnost provádí komplexní, kvalitní, rychlou a nepřetržitou údržbu výrobních jednotek a technologického zařízení ve všech průmyslových odvětvích: chemie, petrochemie, energetika, teplárenství, papírenství, atd. Naše služby zahrnují především: Plánování, řízení a realizace odstávkových prací výrobních jednotek. Preventivní finančně plánovanou údržbu. Montáže, údržbu a rekonstrukce rotačních, pístových a speciálních strojů. Rekonstrukce a opravy tlakových nádob a potrubních systémů. Střední, generální opravy a likvidace havárií. Výrobu, montáž a opravy pecních systémů. Opravy a revize průmyslových armatur včetně redukčních a pojistných ventilů. Údržbu a revize zdvihadel. V rámci provádění údržby jsme schopni dodržet požadavky na jakost pro dané zařízení včetně nároků na čistotu média, dle požadavků zákazníka a nastaveným technologickým procesem ve výrobě. Díky zkušenostem a kvalifikaci našich pracovníků jsme schopni zajistit nejen samotnou komplexní údržbu, ale našim partnerům přinášíme také inovativní řešení a osvědčené postupy z údržby a projektů, které byly realizovány dalšími společnostmi naší skupiny po celém světě. Strana 12
INVESTIČNÍ PROJEKTY
Naše společnost zajišťuje od návrhu po výrobu a instalaci strojních částí a celých technologických celků a to včetně realizace montáže a všech dalších souvisejících doprovodných činností. Disponujeme dostatkem kvalifikovaných zaměstnanců, jsme certifikováni dle mezinárodních standardů a jsme připraveni vyhovět všem potřebám a záměrům našich zákazníků. Nabízíme a realizujeme veškerá individuální řešení investičních projektů našich zákazníků nejen z oboru chemie, energetiky nebo plynárenství. Strana 13
MONTÁŽE POTRUBNÍCH SYSTÉMŮ Zajišťujeme komplexní dodávky potrubních systémů v rozsahu projekt, výpočty, výroba, montáž, zkoušky, uvedení díla do provozu a to jak v rámci dodávek nových celků, tak i jako rekonstrukci a modernizaci stávajících technologických zařízení. Kromě dodávek potrubních systémů zajišťujeme i veškeré další doprovodné činnosti jako jsou opravy armatur, lešení, izolace, nátěry, nedestruktivní zkoušky atd., takže našim zákazníkům poskytujeme dodávku kompletního díla. • Potrubní systémy (tlakové i netlakové části) – dodávka a montáž • Pomocné ocelové konstrukce včetně uložení potrubí • Předizolovaná potrubí pro dálkové rozvody tepla CZT – teplovody, horkovody, parovody • Plastové potrubní systémy PE, PP, PVCtlakové • Řízení projektů na klíč • Zpracování projektové dokumentace • Komplexní vyzkoušení Strana 14
STROJNÍ VÝROBA Divize Strojní výroba se specializuje hlavně na výrobu a opravy tlakových i netlakových nádob, výměníků, zásobníků, kotlů, nádrží apod. a to s maximálním respektem na přání a zadání zákazníka. Součástí divize je samostatná konstrukční kancelář, která je schopná kromě českých a evropských standardů nabídnout návrh a výpočet tlakových či netlakových aparátů. Nabízené činnosti: ▪ Návrh a výroba speciálních tlakových zařízení • Návrh a výroba trubkových výměníků, kondenzátorů a výparníků • Návrh a výroba speciálních náhradních dílů pro stroje a zařízení chemického a strojního průmyslu • Opravy armatur Dalšími nabízenými službami jsou:
• Obrábění (soustružení, frézování, broušení, dělení materiálu) ▪ Vysokokapacitní svařování pod tavidlem ▪ Svařování trubkovnic ▪ Tváření materiálu ▪ Lapování ▪ Žíhání Strana 15
SERVIS PARNÍCH TURBÍN Úsek Servis turbín zajišťuje montáže, revize, generální opravy a modernizace všech typů parních turbin a turbogenerátorů včetně příslušenství Dále provádíme: Revize a opravy parních turbínek a napájecích čerpadel parních kotlů, oběhových, kondenzačních a dalších odstředivých čerpadel Revize a opravy turbokompresorů, dmychadel a jiných točivých strojů Zajišťujeme vylévání kluzných ložisek kompozicí včetně jejich opracování a slícování Statické a dynamické vyvažování rotorů točivých strojů Zajišťujeme výrobu součástí a ND parních turbin, CHP čerpadel, kompresorů a dmychadel Zajišťujeme výrobu ozubených převodů Komplexní diagnostiku turbín Komplexní ošetření turbinových olejů – filtrace, odvodnění, aditivace na parametry nového oleje Poskytujeme technickou pomoc: Při zkouškách a uvádění do provozu, seřizování ochran a regulace, zjišťování příčin poruch a výpadků, měření vibrací Zajišťujeme poradenskou službu a školení obsluhujícího personálu. Strana 16
IZOLACE A NÁTĚRY Návrh, dodávka a realizace technických izolací a antikorozní ochrany • dodávky izolačních a nátěrových systémů na klíč
• projekty a výpočty izolačních a nátěrových systémů • tepelné a chladové izolace technologických zařízení a rozvodů • akustické úpravy interiérů a snižování hluku v průmyslových provozech • protihlukové kryty turbín • tlumiče hluku
• opláštění budov, výroba tepelně izolačních a protihlukových stěn • výroba prefabrikátů • nátěry ocelových konstrukcí, technologických zařízení a rozvodů • abrazivní otryskávání povrchů (plně vybavené tryskací boxy) Dílny jsou vybaveny moderními poloautomaty a ostatními potřebnými klempířskými stroji a disponuje odbornými pracovníky, což umožňuje jak výrobu klempířských prvků i pro nejsložitější povrchové úpravy izolací, tak výrobu akustických panelů, podkonstrukcí a jiných zámečnických prvků pro izolační práce. Dále nabízíme výrobu a montáž šitých izolačních matrací pro izolaci turbín. Strana 17
LEŠENÍ
Navrhování a stavba lešení Statický výpočet lešení Montáž, demontáž a lešení Speciální konstrukce lešení pro chemická a energetická zařízení Unikátní montáže lešení ve složitých technologických provozech Tribuny a pódia pro sportovní a kulturní akce Pronájem lešení Školení lešenářů jiných firem Speciální zařízení pro přepravu lešení CELKOVÉ MNOŽSTVÍ LEŠENÍ Lešení systému LAYHER Trubkové lešení SKLADY A MNOŽSTVÍ LEŠENÍ Litvínov – UNIPETROL RPA, s.r.o. Praha – areál teplárny Malešice Pardubice – Synthesia, a.s.
cca 80 000 m 2 cca 40 000 m 2
80 000 m2 30 000 m2 10 000 m 2
POUŽÍVANÉ TYPY LEŠENÍ Trubkové lešení LAYHER ALLROUND, PLETTAC ASSCO FUTURO LAYHER BLITZ, PLETTAC ASSCO QUADRO Strana 18
ENGINEERING Úsek engineering disponuje moderním specializovaným programovým vybavením, kvalifikovanými pracovníky, a díky tomu jsme schopni nejen připravit konstrukční návrh nových zařízení nebo údržby stávajícího, ale také provést potřebné výpočty a ověření, že zařízení bude splňovat požadované parametry. Dále nabízíme: ▪ zpracování prováděcích projektů potrubních systémů ▪ zpracování výrobně montážní dokumentace potrubí ▪ zpracování projektů pro tlakové zkoušky a olejové proplachy ▪ pevnostní a dilatační výpočty potrubních rozvodů ▪ návrhy oprav parovodů a jejich částí, výstavba nových ▪ návrhy a výroba redukčně chladících stanic ▪ výpočty potrubních dílů, např. odlučovače vody a nečistot v parním potrubí ▪ dýzy, clony tlakové zámky a podobně ▪ zdokumentování reálného stavu potrubí ve výrobních jednotkách ▪ návrhy a výpočty kovových tlumičů hluku Strana 19
OSTATNÍ SLUŽBY
Naše společnost nabízí technické zázemí poskytující následující specializované a podpůrné služby ▪ Nedestruktivní testování a zkoušky materiálu ▪ Opravy a revize průmyslových armatur včetně redukčních a pojistných ventilů ▪ Konstrukce, projekce, výkresová dokumentace ▪ Autodoprava a mechanizace ▪ Příprava, realizace a řízení projektů a staveb ▪ Údržba a revize zdvihadel ▪ Svářečská škola Strana 20
Rámcové smlouvy na údržbu se společnostmi
• UNIPETROL RPA, s.r.o.
Provádění běžné údržby včetně odstávek technologických celků
▪ LINDE GAS, a.s.
Provádění běžné údržby
▪ AIR PRODUCTS, spol. s r.o.
Provádění běžné údržby
▪ SPOLCHEMIE, a.s.
Provádění běžné údržby
▪ SYNTHESIA, a.s.
Provádění běžné údržby
▪ EPISPOL, a.s.
Provádění běžné a preventivní údržby
▪ INNO – COMP BOHEMIA, s.r.o.
Provádění běžné a preventivní údržby
▪ PRAŽSKÁ TEPLÁRENSKÁ, a.s. Provádění běžné, nahodilé a plánované údržby
▪ Elektrárna Chvaletice, a.s.
Provádění údržby
▪ ÚSTÍ OILS, s.r.o.
Provádění strojní údržby
strana 21
Významní zákazníci
• UNIPETROL RPA, s.r.o.
• DOOSAN ŠKODA POWER, s.r.o.
• SPOLCHEMIE, a.s.
• ČEZ, a.s.
• EPISPOL, a.s.
• KRONOSPAN ČR, spol. s r.o.
• AGROFERT HOLDING, a.s.
▪ VÍTKOVICE POWER ENGINEERING, a.s.
• SYNTHESIA, a.s.
▪ UNITED ENERGY, a.s.
• LOVOCHEMIE, a.s.
▪ LINDE GAS, a.s. ▪ AIR PRODUCTS, spol. s r.o. ▪ CHEMOPROJEKT, a.s. ▪ SYNTHOS Kralupy, a.s. ▪ CB&I Lummus s.r.o.
▪ PRAŽSKÁ TEPLÁRENSKÁ, a.s. ▪ ŠKODA PRAHA INVEST, s.r.o. ▪ KOVOPROJEKTA BRNO, a.s. ▪ ZVVZ GROUP ▪ INTECHA, spol. s r.o. ▪ SLOVNAFT, a.s.
▪ ČESKÁ RAFINÉRSKÁ, a.s. Strana 22
ZÁVĚR
Bilfinger Industrial Services Czech s.r.o. Václava Řezáče 313 434 01 Most Czech Republic
Telefon +420 476 456 602 Fax +420 476 456 603
[email protected] www.bisczech.cz
Strana 23