DAFTAR PUSTAKA
Annisa. 2007. Pengaruh Konsentrasi Monomer terhadap grafting kitosan pada Film Polietilen dengan Metode Grafting. Skripsi. Universitas Lampung. Auras, R. 2002. Polylactid Acid as a New Biodegradable Commodity Polymer. hppt://material.eng.usm.my/stafhome/hazizan/EBB%20324/EBB%20324 % 20Lecture%2010%PLA.pdf. Diakses Tanggal 12 Januari 2012. Bastioli, C. 2002. Global Status of the Production of Biobased Packaging Materials. Novara. Italy. Batelheo, T., N. Teixira, and F. Aguiar, 2004. Polylactic Acid Prodeuction From Sugar Molasses. International Patent WO. Belitz, H. D. dan Grosch. 1999. Food Chemistry. Verlag Springer, Berlin. Bijarimi M., Sahrim A, Rozaidi R. 2012. Mechanical, Thermal and Morphological Properties of PLA/PP Melt Blends. Dubai (UAE). 7 Oktober 2012. Billmeyer, F.W.Jr. 1994. Text Book of Polymer Science. Third Edition, A Wiley Inter Science Publication. Bourtoom, T. 2007. Effect of Some Process Parameters on The Properties of Edible Film Prepared From Starch. Department of Material Product Technology, Songkhala. (on line) Avaliable at: http://vishnu.sut.ac.th/iat/food_innovation/up/rice%20starch%20film.doc Chan, H. T., JR. 1983. Handbook Of Tropical Foods. Marcel Dekker Inc., New York and Bassel. Chan, C. M. 1994. Polymer Surface Modification and Characterization. Hanser/Gradner Publications, Inc. Cincinmati. Chaplin, M. 2002. Starch. http//:www.sbu.ac.uk.(25 Maret 2003). Cui, S. W. 2005. Food Carbohidrates Chemistry, Physical Properties, adn Aplications. CRC Press, Boca Raton, London, New York, Singapore
47
Cowd, M. A. 1991. Kimia Polimer. Diterjemahkan oleh J. G. Stark. Penerbit ITB. Bandung. 52-53. Dewi, Mariani. 2009. Producers Responsible’ for Recycling Plastic Waste. http://www.thejakartapost.com/news/2008/11/11/039producersresponsible039- recycling-plastic-waste.html. Diakses pada tanggal 28 Oktober 2011, pukul 20.10 WIB Engelberg, I and Kohn, J. 1991. Physico-mechanical properties of degradable polymers used in medical applications: a comparative study. Journal of Biomaterials. Vol. 12, pp. 292. Frisch, K. C. 1970. Topologically Interpenetrating Polymer Networks. Polymer Institute. University of Detroit. Detroit. USA. www.google.com. Diakses pada tanggal 14 April 2012 Hartoto, L., A. Suryani, dan E. Hambali. 2005. Rekayasa Proses Produksi Asam Polilaktat (PLA) dari Pati Sagu Sebagai Bahsn Baku Utama Plastik Biodegradable. Institut Pertanian Bogor. Bogor. Haryani S. 1995. Kajian awal Proses Polimerisasi Pati Ubi Jalar dengan Metil Metakrilat sebagai Bahan Dasar Bioplastik (skripsi). Bogor. Fakultas Teknologi Pertanian, Institut Pertanian Bogor. Hodgkinson N, Taylor M. 2000. Thermoplastic Poly (Vinyl Alcohol) (PVOH). Journal of Materials World, vol. 8, pp. 21-25. Hsu, C. P. S. 1994. Infrared Spectroscopy. Handbook of Instrumental Techniques for analytical Chemistry. http://www.thejakartapost.com/news/2008/11/11/039producersresponsible039- recycling-plastic-waste.html. Diakses pada tanggal 28 April 2011 pada pukul 20.10 WIB. Hui, Y. H. 2006. Handbook of Food Science, Technology, and, Engineering Volume I. CRC Press, USA. Hustiany, R. 2006. Modifikasi Asilasi dan Suksinilasi Pati Tapioka sebagai Bahan Enkapsulasi Komponen Flavor. Disertasi Pasca Sarjana. Institut Pertanian Bogor . Jacobs, H., and J. A. Delcour. 1998. Hidrotermal Modifications of Granular Starch, with Retention of the Granular Structure: a Review. Journal of Agriculture. Food Chemistry. 46(8), pp. 2895-2905. Kemala T. 1998. Pengaruh Zat Pemlastis Dibutil Ftalat pada Polyblend Polistirenapati (tesis). Bandung: Program Pascasarjana, Institut Teknologi Bandung.
48
Ke T., Sun X. S. 2003. Starch, poly(lactic acid), and poly(vinyl alcohol) blends. Journal of Polymers and the Environment. Vol. 11, pp. 7-14. Lawton, JH., Lkiens, GE. 2000. Moleculer Methods in Ecology. Oxford. Blackwell Science. Lehninger, A., L. 1982. Dasar-Dasar Biokimia. Penterjemah: M. Thenawijaya. Erlangga, Jakarta. Lindeman, M. K. 1971. Encyclopedia of Polymer Science and Technology. 15 Wiley-Interscience, New York. Liu, C., F. L, Yoa, W. Chen, and K. D. Yoa. 2005. Anti-Toxicity Microsphere Kitosan and Poly Lactat Acid. Journal of Applied Polymer Science. Vol. 89, pp. 38-40. Lunt, J. 1998. Cradle To Gate Environmental Footprint and Life Cycle Assessment of Poly(Lactic Acid). Journal of Polymers and the Environment. Vol. 59, pp. 145. Mohamed, Abdellatif; Sherald H. Gordon, Biresaw, Girma. 2006. Poly (lactic acid)/Polystyrene Bioblends Characterized by Thermogravimetric Analysis, Differential Scanning Calorimetry, and Photoacoustic Infrared Spectroscopy. Journal of Applied Polymer Science. Vol. 106, pp. 1689– 1696. Naitove. H. M. 1998. Synthesis and Properties Of Poly(Lactidde)-PolyetherPoly(L-lactide) triblock copolymers. Journal of Polymers and the Environment. Vol. 44, pp. 13. Oates, C. G. 1997. Towards an Understanding of Starch Granule Structure and Hydrolysis. Review. Trends in Food Science and Technology. Vol. 8, pp. 375-382. Pagliaro, M and Rossi, M. 2010. The Future of Glycerol. The Royal Society of Chemistry. DOI: 10.1039/9781849731089/ ISBN: 978-1-84973-108-9. Pranamuda H. 2001. Pengembangan Bahan Plastik Biodegradable Berbahan Baku Pati Tropis. Disampaikan pada Seminar on-Air Biodegrabable untuk Indonesia Abad 21, 1-14 Februari 2001. Jepang: Sinergy Forum-PPI Tokyo Institute of Technology. Qoriah, Damayanti Tri. 2011. Pembentukan dan Karakterisasi Plastik Ramah Lingkungan dari Campuran Kitosan - Poli Asam Laktat. (Skripsi). Fakultas Matematika dan Ilmu Pengetahuan Alam. Universitas Lampung. Rafli, Rusdi. 2008. Karakteristik Matriks Termoplastik Polietilena Terplastisasi Poligliserol Asetat. (Tesis). Universitas Sumatra Utara. Medan.
49
Ranika. 2010. Plastik Biodegradable untuk Lingkungan Kita. hppt://www.google.com. Diakses Pada Tanggal 18 Agustus 2011. Ristadi, Febrianto Amri. 2011. Studi Mengenai Sifat Mekanis Komposit Polylactic Acid (PLA) Diperkuat Serat Rami.(Skripsi). Universitas Gajah Mada. Yogyakarta Santayonan, R., dan J. Wootthikanokkhan. 2003. Modification of Cassava Starch by using Propionic Anhydride and Properties of the Starch Blended Polyester Polyurethane. Carbohydrate Polymers. Vol. 51(1), pp. 17-24. Saputro, Fitrian Dwi. 20012. Pembuatan dan Karakterisasi Plastik Ramah Lingkungan Dari Campuran Polisterena-Poli Asam Laktat. (Skripsi). Fakultas Matematika dan Ilmu Pengetahuan Alam. Universitas Lampung. Schonberger H, Maumann A, Keller W. 1997. Study Of Microbial Degradation of Polivinil Alcohol (PVA) in Wastewater Treatment Plants. Jerman : American Dyestuff Reporter. Sheftel VO. 2000. Indirect Food Additives and Polymer : Migration and Toxicology. Boca Raton London New York Washington, DC : Lewis Publisher. Hal. 736-737, 1167-1169. Shriner, R.L., Fuson, R.C., Curtin, D.Y., Morrill, T.C., 1980. The Systematic Identification of Organic Compounds, 6th edn. John Wiey. New York. p. 167. Stevens, M. P. 2001. Kimia Polimer. Diterjemahkan oleh Iis Sopyan. Pradnya Paramita. Jakarta. 33-35. Suharty, N. S. 1993. “Reactive Processing of Polyelefins using Antioxidant Systems”, Ph.D. Thesis. Department of Chemical Engineering and Applied Chemistry. Aston University. Birmingham. United Kingdom. Sun, Susan. 2001. Biodegradabel Plastics from Wheat Strarch and Polylactic Acid (PLA). Journal of Applied Polymer Science. Vol. 85, pp. 162-168. Suyatna, N., A. Copinet., V. Coma, and L. Tighzert. 2007. Mechanical and Barrier Properties of Biodegradable Films Based on Chitosan and Poly (Lactid Acid) for Food Packaging Aplication. Journal of Applied Polymer Science. Vol. 40, pp. 762-772. Widiarto, S. 2005. Modifikasi Plastik Ramah Lingkungan dari Campuran Pati Sagu-Polivinil Alkohol dengan Penambahan Gluterldhehida. Laporan Penelitian Pengembangan Dari Proyek HEDS. Lampung. Winarno, F. G. 1984. Kimia Pangan dan Gizi. Gramedia, Jakarta.
50
Yusmarlela. 2009. Studi Pemanfaatan Plastisiser Gliserol dalam Film Pati Ubi dengan Pengisi Serbuk Batang Ubi Kayu. (Tesis). Universitas Sumatra Utara. Medan. Yuwono, Dwi Suripto and Hadi Suripto. 2008. Production Of Lactic Acid From Onggok and Tofu Liquid waste with concentrate maguro waste supplement by streptococcus bovis. Australian Journal of Basic and Applied Sciences: 2 (4), pp. 993-942
