Vyhlásená súťaž Česko dátum zverejnenia: 26.1.2012 www.verejne-obstaravanie.sk
[email protected]
Česká republika – Ministerstvo obrany
0503 – Servis vzduchotechniky, chladícího zařízení a systému MaR, 05/2012 0503 – Servis vzduchotechniky, chladícího zařízení a systému MaR, 05/2012
1/8
Vyhlásená súťaž Česko dátum zverejnenia: 26.1.2012 www.verejne-obstaravanie.sk
[email protected]
Výběrové řízení
Typ VŘ: DLS - Poptávkové řízení – dlouhodobá smlouva Nákup x odprodej: Nákup Druh výdaje: Nemovitý Způsob evidence: Decentrální Čj.: 12142000/1-0/00036-1-000 Čj. - poznámka: 5/0503 Název: 0503 – Servis vzduchotechniky, chladícího zařízení a systému MaR, 05/2012
Zpracovatel VŘ: Nák. středisko: 142000 (PARDUBICE) Jméno: Jana Příjmení: Cílová E-mail:
[email protected] Telefon: 973245721 Fax: 973245735
Kontaktní adresa: Ulice: Vojenská ubytovací a stavební správa, Teplého 1899 Město: Pardubice PSČ: 530 02 Země: Česká republika Doručovací adresa: Ulice: Vojenská ubytovací a stavební správa, Teplého 1899 Město: Pardubice PSČ: 530 02 Země: Česká republika Fakturační adresa: Česká republika - Ministerstvo obrany Tychonova 1 Praha 6 160 01 IČ: 60162694 DIČ: CZ60162694 zastoupená Vojenským zařízením Ulice: Tychonova 1 Město: Praha 6 PSČ: 160 00 Země: Česká republika - MO
Historie stavů: 26.1.2012 8:41:59 Spuštěno 26.1.2012 10:00:01 Přijímání nabídek
Současný stav: Přijímání nabídek Blokováno: Ne
2/8
Vyhlásená súťaž Česko dátum zverejnenia: 26.1.2012 www.verejne-obstaravanie.sk
[email protected]
Důvod zablokování: Datum a čas zahájení:26.1.2012 10:00:00 Datum a čas ukončení:2.2.2012 10:00:00
Základní informace o zadavateli
Česká republika – Ministerstvo obrany se sídlem Tychonova 1, 160 00 Praha 6 zastoupená: Ing., Pavel Jůn, Ředitel VUSS Pardubice IČ: 60162694 DIČ: CZ60162694
Zadávací podmínky
Další kontaktní osoby pro informaci o VŘ Jaroslav Hlubuček, telefon 973 252 276, Provozní středisko 0503 Hradec Králové
Předmět a vymezení plnění zakázky Jedná se o provádění pravidelných prohlídek (kontrol), servisu vzduchotechniky s výměnou filtrů, chladícího zařízení, systému MaR a revize el. instalace dle platných norem ČSN EN a požadavků výrobce. Místem provádění jsou Radioizotopické laboratoře NBC Hradec Králové (v objektu FN Hradec Králové) č. CE 05-15-19/ 001 To vše dle níže uvedeného rozsahu: 1. Pravidelné prohlídky (kontroly) servis VZT s výměnou filtrů, chladícího zařízení a systému MaR . Zadavatel si vyhrazuje podmínku, aby část zakázky týkající se úniku chladiv HCFC a F-plynů byla provedena zhotovitelem zakázky, nikoliv subdodavatelsky. 2. Revize vyhrazených elektrických zařízení dle platných norem ČSN EN. 3. Opravy vad zařízení tj. závady způsobené nepředvídatelnými skutečnostmi nebo opravy vad způsobených běžným opotřebením. Tyto opravy zahrnují veškeré činnosti potřebné k docílení předepsaných technických parametrů zařízení po zjištění nepřípustných odchylek, odstranění závady včetně její zjištěné příčiny a uvedení zařízení do provozu. 4. Nástup k provedení opravy bude vždy do 6 hodin od doby nahlášení v pracovní dny, so a ne a pracovní i mimo pracovní dobu. 5. Maximální požadovaná doba k odstranění závady od doby nahlášení je 1 den (v pracovní dny a pracovní dobu.) 6. Po ukončení opravy vady bude za přítomnosti oprávněného zástupce dodavatele proveden na zařízení zkušební provoz o kterém bude proveden zápis do provozní knihy zařízení. Zápis se provede i v případě, že se zařízení neopraví v požadovaném termínu a uvede se zde zdůvodnění s předpokládaným termínem opravy. 7. Použitý materiál při opravě bude fakturován v cenách v místě obvyklých. 8. O provedení revize dle EN – ČSN bude vypracována revizní zpráva o 3 stejnopisech pro zhotovitele a tato bude zhotoviteli předána do 10 dnů od provedení revize. Jedná se o zařízení: VZT jednotky KLM 04 (pozn.: přívod a odtah) pro laboratoř BSL2 a chemickou laboratoř a KLM 02 (pozn.:
3/8
Vyhlásená súťaž Česko dátum zverejnenia: 26.1.2012 www.verejne-obstaravanie.sk
[email protected]
přívod) pro laboratoř BSL2 – výrobce jednotek JANKA Radotín, VZT jednotka REMAK 60-35/31-6D (pozn.: přívod ) pro šatnu a chemickou laboratoř, řídící jednotka REMAK(VCA-D-VO) a regulátor pro otáčky ventilátoru(RDV 5-E), kompaktní filtrační jednotka – 3 stupňová filtrace pro laboratoř BSL3 (pozn.: výměna filtrů - nutnost ochrany celého těla !!!), chladící/kondenzační jednotky LENNOX KSCK 12E (pozn.: provozní knihy zařízení) a chladící/kondenzační jednotka KSCK 10E, odsávací jednotky-komplet (pozn.: vzduch z digestoří z chemické laboratoře) RSH 250 PK/1LA7096-2AA/KOMAXIT s motorem SIEMENS 2,2kW a RSH 400 PK/1LA71300-2AA/KOMAXIT s motorem SIEMENS 5,5kW, regulátory MaR : DI-BA(8kW/400V) typ skříně RU 2064 a DI-BB(10kW/400V). · Pololetní prohlídka (kontrola) servis VZT s výměnou filtrů, chladícího zařízení a systému MaR bude provedena v měsíci duben a říjen příslušného roku. · Revize vyhrazených elektrických zařízení v objektech třídy A do 1000 V bude provedena v měsíci dubnu 2012. U všech VZT jednotek bude prováděna vizuální a poslechová kontrola zařízení (funkčnost jednotlivých zařízení, hlučnost točivých strojů), vizuální kontrola zanesení instalovaných filtračních vložek, vizuální kontrola jističů, relé a stykačů, kontrola odvzdušnění instalovaných výměníků tepla/chladu, kontrola odvodu kondenzátu, případně vyčištění drenážní vany, kontrola funkce servopohonů klapek a směšovacích ventilů, kontrola poškození instalovaných výměníků tepla/chladu, kontrola upevnění elektromotorů, měření proudové zátěže jednotlivých fází elektromotorů, dotažení spojů v silových elektrických rozvaděčích, kontrola funkce ventilátoru (chvění), vůle ložisek, kontrola funkce izolátorů chvění a dilatačních vložek, kontrola souososti řemenic ventilátorů a motorů, dotažení klínových řemenů, případně výměna, kontrola funkce klapek a těsnosti dovírání, kontrola čistoty komor jednotek a ploch výměníků, vyčištění, kontrola těsnosti šroubových spojů, kontrola nátěrů, těsnění a izolací VZT rozvodů a rozvodů medií tepla a chladu. U všech chladících/kondenzačních jednotek bude prováděna kontrola a servis dle požadavků výrobce např. prováděna vizuální kontrola zařízení (funkčnost jednotlivých zařízení, hlučnost točivých strojů), čištění vnitřních prostor chladící/kondenzační jednotky, kontrola filtračních vložek a žebrovek chladících a topných registrů, čištění výparníkových dílů, lopatek oběžných kol, výústek, pevných tukových filtrů, kontrola tlaků a těsnosti chladícího okruhu s případným doplněním chladiva, kontrola tepelných pojistek a ovládacího panelu zařízení, kontrola a seřízení klínových řemenů s případnou výměnou, kontrola a seřízení čidel expanzních ventilů a dalších elementů chladícího okruhu, ložisek a pružných uložení, kontrola funkce manostatů, kontrola a dotažení šroubových spojů, promazání pohyblivých částí, ložisek a odstranění drobných netěsností, měření proudové zátěže jednotlivých fází a elektrického příkonu, odzkoušení bezpečnostních ochran, provést záznam provoz. údajů do provoz. evidenčních knih zařízení. K nově vloženým filtrům zhotovitel dodá příslušné certifikáty splňující požadavky pro použití v ČR. Kontrola a případné nastavení MaR (DI-BA, DI-BB) dle požadavku uživatele. Práce musí být prováděny v pracovní dny v pracovní době od 07:00 hod. do 15:00 hod. Pracovníci dodavatele se budou pohybovat v prostorách výzkumných laboratoří zaměřených na biologický a chemický výzkum (BSL 2 a BSL 3) pro potřeby výuky. Je proto nutné dodržování místních provozních řádů a bezpečnostních předpisů pro pohyb a činnost v těchto prostorách a celého objektu. Likvidace znečištěných filtrů, zejména filtry z laboratoře BSL 3 (pozn.: 3.stupňová filtrace – míst.sprch.skafandru) musí být likvidovány dle současných platných zákonných předpisů. Původcem veškerého odpadu bude zhotovitel. Zhotovitel zlikviduje odpad v souladu se zákonem 185/2001 Sb.(bude doložen EPNO list, vážní lístek s razítkem a podpisem vážného). Upřesnění termínů nástupu na provádění pravidelných servisních prací bude zhotovitel konzultovat s osobou odpovědnou za předání a převzetí díla deset dnů před tímto termínem. Vstup bude povolen pouze občanům EU. Pořizování fotodokumentace bude možné jen se souhlasem uživatele objektu. Po ukončení prací bude proveden zápis do provozní knihy zařízení. O provedení revize dle EN – ČSN bude vypracována revizní zpráva o 3 stejnopisech pro zhotovitele a tato bude zhotoviteli předána do 10dnů od provedení revize. Zhotovitel ručí za jakost jím poskytnuté služby této smlouvy po dobu 120 dnů ode dne poskytnutí služby resp. ode dne písemného potvrzení o odstranění vad (dále jen „záruční lhůta“). Záruční lhůta na dodávky materiálu počíná běžet dnem podpisu servisního protokolu a končí dnem uplynutí záruční doby tj. po uplynutí 36 měsíců. Seznam zařízení je uveden v příloze k SOD 05/2012, č. 1. Uchazeč vyplní kompletně přílohy: „Cenová kalkulace s rozsahem prací“ . „Cenová kalkulace za provedení oprav pro zajištění provozuschopnosti zařízení“ . Fakturovány budou jen skutečně provedené práce!
4/8
Vyhlásená súťaž Česko dátum zverejnenia: 26.1.2012 www.verejne-obstaravanie.sk
[email protected]
Doba a místo plnění Předpokládaný termín zahájení: 20.02. 2012 Předpokládaný termín ukončení: 31.12. 2012 Místo plnění: Radioizotopické laboratoře NBC Hradec Králové (v objektu FN Hradec Králové) Prohlídka zakázky je možná dne 27.1. 2012 v 8.30hod. Sraz zájemců o prohlídku bude v areálu FN Hr.Králové u vchodu bud.č.001 RIL – budova laboratoří NBC (pozn.: za psychiatrickou klinikou, budova RIL – NBC je v areálu FN HK vedena pod číslem 5 ). Kontaktní osobou je p. Jaroslav Hlubuček, tel. 973 252 276, 605 113 929
Zpracování nabídkové ceny Nabídkovou cenu uvádějte do přílohy „Cenová kalkulace s rozsahem prací “ a současně i uveďte hodinovou sazbu za provedení opravy dle přílohy „Cenová kalkulace za provedení oprav pro zajištění provozuschopnosti zařízení“. Tato cena bude jedním z hodnotících kriterií !! (její nevyplnění může být důvodem k nehodnocení nabídky). Součtová cena z řádku CELKEM cena za všechny položky - rok 2012 v příloze „Cenová kalkulace s rozsahem prací “ bude uvedena v záložce „Komodita“. Cena uvedená v záložce „Komodita“ je cenou konečnou. Musí zahrnovat veškeré související náklady. Další náklady nebudou připuštěny. Tato cena nemůže být upravena ani v případě početní chyby. Cena za provádění oprav (hodinová sazba) se do záložky „Komodita“ neuvádí, tato cena je hodnocena jako samostatné dílčí hodnotící kriterium – viz položka „Kriteria a lhůta hodnocení“. Celková nabídková cena bude uvedena v Kč jako nejvýše přípustná. Bude uvedena bez DPH a cena nejvýše přípustná celkem, včetně DPH za celé dílo. Po dobu platnosti smluvního vztahu bude cena neměnná.
Kritéria a lhůta hodnocení Nabídky budou hodnoceny dle ekonomické výhodnosti pro zadavatele. Při nesplnění těchto požadavků bude uchazeč i přes podání nabídky z VŘ vyloučen!! Maximální počet získaných bodů je 100. Kritéria hodnocení: Výše nabídkové ceny za zakázku, vč. DPH – váha kritéria : 75 bodů Hodinová sazba za provedení oprav, včetně všech souvisejících nákladů (zjištění závady, zpracování cenové nabídky, dopravy, času stráveného na cestě a příplatků za víkendy a svátky). Maximální počet je 25 bodů a získá jej zakázka s nejnižší hodinovou sazbou za provedení oprav. Vyhodnocení nabídek proběhne do 5 pracovních dnů od ukončení přijímání nabídek.
Platební a fakturační podmínky Faktura bude zpracována dle § 28 zákona č. 235/2004 o dani z přidané hodnoty ve znění pozdějších předpisů a musí obsahovat veškeré náležitosti daňového dokladu. Není-li dodavatel plátcem DPH, vystaví fakturu jako účetní doklad v souladu se zákonem o účetnictví. Objednatel uhradí fakturu do 21 dnů po jejím obdržení.
Práva zadavatele Zadavatel si vyhrazuje právo: - výběrové řízení zrušit do doby uzavření smluvního vztahu - nevracet podané nabídky - neposkytovat náhradu nákladů, které uchazeč vynaloží na účast ve výběrovém řízení - upřesnit konečné znění smlouvy po formální stránce před podpisem smlouvy s vybraným uchazečem
Komodity
5/8
Vyhlásená súťaž Česko dátum zverejnenia: 26.1.2012 www.verejne-obstaravanie.sk
Název Popis Servis vzduchotechniky, chladícího zařízení a systému MaR
[email protected]
Množství 1,00
Jednotka ostatní
Počet bodů za cenu: 75 b. z 100 b.
Upozornění dodavatelů
Seznam zvolených oblastí komodit:
[42113130-4] [45330000-9] [45331000-6] [45331220-4]
Kondenzátorové systémy pro chlazení vzduchu Instalatérské a sanitární práce Instalace a montáž topení, větrání a klimatizace Instalace a montáž klimatizace
Region poptávky
Královéhradecký kraj Jihočeský kraj Jihomoravský kraj Karlovarský kraj Liberecký kraj Moravskoslezský kraj Olomoucký kraj Pardubický kraj Hlavní město Praha Plzeňský kraj Středočeský kraj Ústecký kraj Kraj Vysočina Zlínský kraj
6/8
Vyhlásená súťaž Česko dátum zverejnenia: 26.1.2012 www.verejne-obstaravanie.sk
[email protected]
Dílčí hodnotící kriteria
Text Počet bodů hodnocení Uveďte hodinovou sazbu vč. DPH pro provedení 25/100 oprav, včetně všech souvztažných nákladů (např. zjištění závady, zpracování cenové nabídky, dopravy, času stráveného na cestě a příplatků za víkendy a svátky) – viz příloha.
Požadavky na dodavatele
Text Nedílnou součástí podání cenové nabídky bude pro všechny uchazeče vyplněná příloha č.1 (cenová nabídka viz níže uvedený seznam ) přiložena v době přijímání nabídek do systému SEPO. Všichni účastníci VŘ doloží v elektronické podobě v době přijímání nabídek do systému SEPO návrh smlouvy doplněný o identifikační údaje a cenu. Dokument bude ve formátu Word. Všichni účastníci VŘ doloží v elektronické podobě v době přijímání nabídek do systému SEPO výpis z obchodního rejstříku, pokud je v něm zapsán, či výpis z jiné obdobné evidence, pokud je v ní zapsán; doklad o oprávnění k podnikání podle zvláštních právních předpisů v rozsahu odpovídajícím předmětu veřejné zakázky, zejména doklad prokazující příslušné živnostenské oprávnění či licenci; přičemž výpis z obchodního rejstříku nesmí být poslednímu dni, ke kterému má být prokázáno splnění kvalifikace, starší 90 kalendářních dnů Všichni účastníci VŘ doloží v elektronické podobě v době přijímání nabídek do systému SEPO osvědčení o registraci plátce DPH je-li firma plátcem DPH Všichni účastníci VŘ doloží v elektronické podobě v době přijímání nabídek do systému SEPO platné oprávnění Státního odborného technického dozoru MO na provádění montáží, oprav a revizí vyhrazených elektrických zařízení v objektech třídy A do 1000 V dle § 36 zákona č. 219/1999 Sb., O ozbrojených silách České republiky, ve znění pozdějších předpisů a § 7 vyhlášky Ministerstva obrany č. 273/1999 Sb.; platné oprávnění a osvědčení o odborné způsobilosti pro pravidelné kontroly na únik chladiva (HCFC a F-plynů). Zadavatel si vyhrazuje podmínku, aby část zakázky týkající se úniku chladiv HCFC a F-plynů byla provedena zhotovitelem zakázky, nikoliv subdodavatelsky. V případě, že zhotovitel bude některou část zakázky zajišťovat prostřednictvím subdodavatele, zadavatel požaduje v době přijímání nabídek do systému SEPO doložit specifikaci této části zakázky a současně i identifikační údaje každého subdodavatele, který bude určené práce vykonávat. K VŘ zhotovitel doloží oprávnění subdodavatelů k části zakázky, kterou bude takto zajišťovat. Současně dodavatel doloží písemná prohlášení těchto subdodavatelů podepsaná osobou oprávněnou jednat jménem či za subdodavatele, že souhlasí s tím, aby byli v nabídce dodavatele uvedeni jako
7/8
Vyhlásená súťaž Česko dátum zverejnenia: 26.1.2012 www.verejne-obstaravanie.sk
[email protected]
Text subdodavatelé.
Přílohy k zadání
Název souboru
návrh smlouvy
příloha č. 1 příloha č. 2
Velikost (kB)
Popis
Strana 1 z 1, záznam 1 až 3 z celkem 3 123
14 28
cenová nabídka čestné prohlášení
Poznámka
Zadavatel odešle cestou SEPO návrh smlouvy vítězi výběrového řízení, který ji do 3 dnů podepíše zaručeným elektronickým podpisem
8/8 Powered by TCPDF (www.tcpdf.org)