SPX AX-400 Azimuth & Elevation antenna rotator Model 1 & 2

Gauke Boelensstraat 108 NL-9203 RS Drachten The Netherlands Tel: +31 (0) 512 354 126 GSM: +31 (0) 650 882 889 Fax: +31 (0) 847 187 776 www.rfhamdesign.com E-mail: [email protected]

SPX AX-400 Azimuth & Elevation antenna rotator Model 1 & 2

SPX Model AX-400 Azimuth and Elevation Rotor is a low weight, low cost solution to Rotate in Azimuth and Elevation your Antenna, small Dish, Astronomy Telescope, Camera, Light Box and many more which must be turned in 2 axes. Supplied controller comes with build in Track interface (USB), lot of tracking program available and easy to install on your Lap-Top or PC and connect the Controller through USB. You can now auto track Moon, Sun, stars, constellations, galaxies, planets, etc etc. But if you prefer you can operate manual by pressing the buttons on the front of the panel or supplied mouse, Resolution is 1 degree and displayed on the front LED display. SPX Rotators are supplied including:

Controller incl. build in track interface (USB) Special mouse to control AZ / AZ & EL Ax USB Cable Connectors CD-Rom Quick start guide

Alle leveringen dienen te worden betaald binnen 30 dagen na factuurdatum. Voor alle door ons gesloten overeenkomsten, leveringen en diensten gelden onze algemene verkoop en leveringsvoorwaarden welke op www.rfhamdesign.com zijn vermeld. All transactions, deliveries and services are subject to the terms and conditions of delivery which can be found at www.rfhamdesign.com RF HAMDESIGN is ingeschreven in het handelsregister K.v.K. te Leeuwarden Nr: 01107005 RF HAMDESIGN is written in at the Chamber of Commerce in Leeuwarden, the Netherlands Nr: 01107005

Specifications: SPX AX-400 Azimuth and Model 01 Elevation Rotator Turning torque 50 Nm

80 Nm

Brake Torque

580 Nm

580 Nm

Brake Construction

Double Worm Gears

Double Worm Gears

Vertical Load

>30 Kg

>40 Kg

Rotation Speed (360 Deg)

+/- 50 sec / 15 Volts DC

+/- 50 sec / 15 Volts DC

Resolution

1 deg

1 deg

Rotation Range Az/El

360/180 deg

360/180 deg

Weight Mass Kg

12,8 Kg

14,5 Kg

Model 02

Position Sensor

Reed Switch

Reed switch

Mast size Bottom mount

Depends on Accesories

Depends on Accesories

Mast size Elevation mount

Depends on Accesories Depends on Accesories Ground / Mobile free air and / or Sheltered

Environment MTBF

12500 hours @ -20 to +55°C

Control cable core

8

8

Specifications Controller: Supply voltage

12……18 Volts DC

Current consumption

5 …10 A (Max current depends on load)

Supplied with

Digital controller, build in PC track interface (serial), software, mouse, PC-cable

Dimensions

245 x 235 x 40mm

Weight:

1.6 Kg

Case

Aluminium / steel Ground / Mobile Sheltered

Environment MTBF

15000 hours @ -5 to +40°C

Display

2* 4 digit (green)

Control cable 8-core

Connection inc. 2* 4 pin-MC connector

RF HAMDESIGN & SPX Controllers will support the following software:

PST Rotor (Also /HR controllers MD-0X) MacDoppler (MacDoppler Ham Radio Satellite Tracking for Macintosh) N1MM Logger Ham Radio Deluxe Logic 7 Version => 7.0.45 Orbiton Satallite Tracking Gpredict Satallite Tracking Linux and MAC SatPC32 Satallite Tracking - works on windows only DXLab (DX View) TRXmanager Most software should also work if it supports Yaesu type rotators ! Note: #1 Software may have new versions and some options may have changed #2 We have not tested all this software ! #3 Most software is for use with Rot2Prog (Dual-Ax rotor AZ&EL), but some also work with the single Ax rotor system Rot1Prog.


Available accesories SPX Accessories

Price Euro

PLATE 02-Rotor 01,02

22


27


36

ARM 01-Rotor 01,02

22

ARM 02-Rotor 01,02

22

Control cable 8-core (8x1,5mm2) CC8-003/25

Model

Price List

Reel: 25meter / 50 meter Power Supply Unit PW-15015 13,5 – 18 Volts / 20 A Dim: 23 x 11 x 5,5 cm (LxBxH)

Price List

Note: Actual Prices can be found in our price list, download link at our web-site: www.rfhamdesign.com


Part No.

Description

Used for

Arm 01 SPX AZ-EL Plate 04 SPX AZ Plate 03 SPX AZ Arm 02 SPX AZ-EL

Top bracket Base plate Base plate Top bracket

Mount Antenna Dish Mount rotor flat Base pipe flat mount Mount pipe

Standard / Option / Select option Standard supplied Standard supplied Select Option Select Option / or extra


SPX AX-400 Azimuth & Elevation antenna rotator Model 1

SPX AX-400 Model 1 Dimensions in mm © RF HAMDESIGN 2015 – The Netherlands Alle leveringen dienen te worden betaald binnen 30 dagen na factuurdatum. Voor alle door ons gesloten overeenkomsten, leveringen en diensten gelden onze algemene verkoop en leveringsvoorwaarden welke op www.rfhamdesign.com zijn vermeld. All transactions, deliveries and services are subject to the terms and conditions of delivery which can be found at www.rfhamdesign.com RF HAMDESIGN is ingeschreven in het handelsregister K.v.K. te Leeuwarden Nr: 01107005 RF HAMDESIGN is written in at the Chamber of Commerce in Leeuwarden, the Netherlands Nr: 01107005

SPX AX-400 Azimuth & Elevation antenna rotator Model 2

SPX AX-400 Model 2 Dimensions in mm © RF HAMDESIGN 2015 – The Netherlands Alle leveringen dienen te worden betaald binnen 30 dagen na factuurdatum. Voor alle door ons gesloten overeenkomsten, leveringen en diensten gelden onze algemene verkoop en leveringsvoorwaarden welke op www.rfhamdesign.com zijn vermeld. All transactions, deliveries and services are subject to the terms and conditions of delivery which can be found at www.rfhamdesign.com RF HAMDESIGN is ingeschreven in het handelsregister K.v.K. te Leeuwarden Nr: 01107005 RF HAMDESIGN is written in at the Chamber of Commerce in Leeuwarden, the Netherlands Nr: 01107005

SPX AX-400 Azimuth & Elevation antenna rotator Model 1 & 2

Recommend Documents