Jurusan Teknik Industri - Universitas Sebelas Maret

Tata Tulis dan Komunikasi Ilmiah

Menulis Hasil Riset Dr. Eko Pujiyanto, Pujiyanto, S.Si., S.Si., M.T.

Jurusan Teknik Industri - Universitas Sebelas Maret

Tujuan Menulis Hasil Riset Menunjukan hasil riset anda, tetapi jauh lebih penting mengungkapkan argumen yang meyakinkan kepada pembaca tentang apa yang kita hasilkan atau temukan.


Pendahuluan Menjelaskan alasan yang rasional tentang riset yang telah dilakukan, antara lain : • Apa kebaruan (novelty) masalah riset yang dilakukan? • Mengapa hasil riset yang ditulis merupakan hasil yang benar? • Apakah hasil riset belum ditulis orang sebelumnya?

Tipe Tulisan Hasil Riset 1. 2. 3. 4. 5.

Tulisan jurnal Tulisan tesis Tulisan laporan Tulisan prosiding Tulisan populer


Tulisan jurnal 1. 2. 3. 4.

5. 6. 7.

Title Abstract Introduction Main Body a. Theory b. Simulation/Experimental Design c. Results and Discussion Conclusions References Other information: Authors, Acknowledgements, Index


Tulisan jurnal 1. Title A title should indicate: – The systems you are working on – The problems you are solving – Your achievements – Your methodology State each point in one or two words


Tulisan jurnal 1. Title

Contoh

–

Pemodelan Lokasi-Alokasi Terminal Bahan Baku untuk Meminimasi Total Biaya Rantai Pasok pada Industri Produk Jadi Rotan.

–

Preparation of Porous Hydroxyapatite as Synthetic Scaffold Using Powder Deposition and Sintering and Cytotoxicity Evaluation.


Tulisan jurnal 2. Abstract An abstract elaborates the same items as indicated by the Title: – The systems you are working on – The problems you are solving – Your methodology – Your achievements Elaborate each point in 1 or 2 sentences


Tulisan jurnal 2. Abstract

Contoh

In Solo Raya, there are more than 400 Small-Medium Enterprises (SMEs) that produce finished products of rattan. They require the supply of raw rattan to support their production capacity which supplied from Kalimantan and Sulawesi. The procurement cost of raw rattan from the sources are very high so that causes the competitiveness of the SMEs products is lower than their foreign competitors. Therefore, to overcome the problem, those costs should be reduced by aggregating the demand of rattan industries. This policy needs to be supported by the warehouse for storing and distributing raw rattan.


Tulisan jurnal 2. Abstract Contoh Hence, this research aims to develop a facility location-allocation model so that total supply chain costs, including raw rattan procurement costs as well as facilities opening and closing costs can be minimized. The location-allocation model will be presented in a mixed integer non-linear programming model and solved using MS-Excel Solver. The results are number and location of the warehouse along with the raw rattan allocation in the warehouse to ensure raw rattan supply for rattan industries.


Tulisan jurnal 3. Introduction Introduction section should clearly describe: – The scope of area of research – Motivation factor: The importance of the area of research – Problem Statement: The specific problems you attempt to solve – Critical Review: Weaknesses of existing solutions – The achievements (main results) – The methodology (in brief)


Tulisan jurnal 3. Introduction

Contoh


Tulisan jurnal 4. Main Body a. Theory Compulsory if your results involve modification of the existing theory/model, Provide the main equations relating to the parameters you are presenting Describe how you have modified/improved the equations suiting to your design Show the derivation sufficiently


Tulisan jurnal 4. Main Body b. Simulation/Experimental Design Describe how the design works i.e the working principle of the design Describe the components used especially the important ones Describe how the design is different from others Highlight the design advantages i.e in terms of simplicity, cost etc. Provide the specification of the system design/setup in running texts or in tabular forms. Describe the assumptions made


Tulisan jurnal 4. Main Body c.

Results Characterization curves / analysis Comparative curves/ analysis Optimization curves/ analysis Discussion Justify if any of your results is inferior to others Highlight your better results Explain why the better results are achieved Relate the explanation to the theory


Tulisan jurnal 4. Main Body

Contoh


Tulisan jurnal 4. Main Body

Contoh


Tulisan jurnal 5. Conclusions Elaborate the items in the Abstract a little further focusing on the results (achievements), and your advantages


Tulisan jurnal 5. Conclusions

Contoh


Tulisan jurnal 6. References Ensure that all references are quoted in the text More references in Introduction, and Results and Discussion Normally, at least 5 references Follow formats The later the better


Tulisan jurnal 6. References

Contoh


Tulisan jurnal Other information: 1. Authors • Authors are “intellectual owners”* of the article • Authors are those who directly contribute to the knowledge contained in the paper • The author who contributes the most (intellectually) appears first, and so on • Other contributors (financially, logistically, morally, physically, administratively, editorially, etc.) are not authors. They should be acknowledged differently.


Tulisan jurnal Other information: 1. Authors A writer is not necessarily an author Authors are those who contributes intellectually (knowledge) while a Writer contributes editorially The author who contributes the most should be the first author


Tulisan jurnal Other information: 2. Acknowledgements


Tulisan tesis (tugas akhir) Tugas Akhir di Teknik Industri UNS
















Tulisan laporan riset Laporan riset Unggulan Perguruan Tinggi DIKTI


Tulisan laporan riset Laporan riset Unggulan Perguruan Tinggi DIKTI


Jurusan Teknik Industri - Universitas Sebelas Maret

Recommend Documents