INFORMATIKAI ALAPISMERETEK ANGOL NYELVEN

ÉRETTSÉGI VIZSGA ● 2015. május 19.

Név: ........................................................... osztály:......

INFORMATIKAI ALAPISMERETEK ANGOL NYELVEN KÖZÉPSZINTŰ ÍRÁSBELI VIZSGA 2015. május 19. 8:00

I. Időtartam: 30 perc

Pótlapok száma Tisztázati Piszkozati

EMBERI ERŐFORRÁSOK MINISZTÉRIUMA

Informatikai alapismeretek angol nyelven

középszint — írásbeli vizsga 1511 I. összetevő

Informatikai alapismeretek angol nyelven középszint

Név: ........................................................... osztály:......

Important Information •

Please read the questions very carefully.

•

Always give your answers according to the instructions provided. If you fail to answer as set out in the instructions, the answer will not be accepted. E.g.: Instead of the letter F, you cannot answer with the letter N.

•

If the question calls for the letter of a single statement, you may not indicate multiple letters as your answer.

•

If a question calls for a single answer, as stated in the instructions, the points awardable cannot be broken down, e.g. in the case of a 2-point question, only 0 or 2 points may be awarded. In all other cases, the method used for scoring is shown beside the question itself.

•

In case of test questions, if you wish to correct an answer already given, please cross out the incorrect solution and write your correct answer next to it. If the correction is unclear, the answer will not be accepted.

•

Wherever you may feel it to be necessary, you may provide an explanation for your answer even if the question calls for no explanation. E.g.: In case of a multiple-choice question, where in your interpretation there is more than one correct solution to the question.

írásbeli vizsga, I. összetevő 1511

2/8

2015. május 19.


Név: ........................................................... osztály:......

1) Which of the following statements are true in connection with SSD-s? a) b) c) d)

The power consumption of SSD-s is greater than HDD-s. Due to their power consumption, SSD-s heat up faster than HDD-s. All data on the SSD can be accessed at the same speed. The operation of SSD-s is not mechanical, there are NOR flash memories built into the integrated circuits. e) The greater the capacity of an SSD drive, the slower the data can be accessed. Write the letter of the correct answer on the dotted line. .................................

1 point

2) The following sentence is an excerpt from the description of a certain printing technology. Complete the description with the correct terms. At the start of printing, the drum becomes electrostatically charged. Then where the dot to be printed should be, drum polarity is changed using ………………. or ……………….. Write the correct terms on the dotted lines.

1 point

3) Which of the following is NOT a file system? a) b) c) d) e)

NTFS FAT32 ext HPFS GRFS

Write the letter of the correct answer on the dotted line. .................................

1 point

4) Below is a section from the Definitions chapter of the Act on Informational SelfDetermination and Freedom of Information (Privacy Act). What term does the following definition describe? “data relating to the data subject, in particular by reference to the name and identification number of the data subject or one or more factors specific to their physical, physiological, mental, economic, cultural or social identity, as well as conclusions drawn from the data in regard to the data subject;” Write the correct term on the dotted line..........................................................

1 point

5) Decide which of the following statements are true. a) The MAC address of a network device cannot be changed. b) The IP address of a computer directly connected to the internet cannot be 192.168.10.12. c) The MAC address is the logical address of a network device. d) IPv4 addresses are 32-bit numbers. e) The MAC address is 64-bit. Write the letters of the correct answers on the dotted line. .............................. írásbeli vizsga, I. összetevő 1511

3/8

2 points 2015. május 19.


Név: ........................................................... osztály:......

6) Of the following, which is the binary number that corresponds to the hexadecimal number 6BD516? a) b) c) d) e)

01111010110101012 01101101101101012 01101011110101012 01101011110101102 01111011110101112


1 point

7) When turning on the computer, the user sees the message “Non-system disk or disk error. Replace and strike any key when ready” displayed on the screen. What may be the problem? a) The BIOS failed to find a bootable operating system. b) The computer’s floppy drive is faulty. c) This particular problem only occurs if there is no operating system installed, and we want to boot the computer the installation DVD. d) This particular problem occurs when we leave the flash drive in the computer. e) None of the above. Write the letter of the correct answer on the dotted line. .................................

1 point

8) Which of the following statements are true for UTP cables? a) b) c) d)

The maximum length of UTP cables is 200 m. The maximum speed achievable with UTP cables is 100 Mb/s. UTP cables are sensitive to radio-frequency and electromagnetic interference. UTP cables are only used for cabling between buildings.


1 point

9) The following description describes which layer of the OSI network model? The main task of the ……………. layer is to provide error-free transmission to the layer above it using the services of the layer below it. It accomplishes this task by having the sender break the input data up into data frames and then transmit the frames. Write the name of the layer on the dotted line.

1 point

10) We are executing a bitwise XOR operation on binary numbers 0110 10102 and 1101 00102. Write the down the result as a decimal number. Write the result on the dotted line. ...................................................................


4/8

1 point

2015. május 19.


Név: ........................................................... osztály:......

11) What is the network device shown below?

a) b) c) d) e)

Cable modem DSL modem HUB Router None of the above.


1 point

12) The image below shows the connectors of the back panel of a motherboard. Of the connectors marked with numbers, which can be used to connect a computer monitor? 4

3

5

6

2

1

7

Write the correct numbers on the dotted line. ..................................................

2 points

13) Determine what the value of the logic expression below will be. Data given: A, B, C, D logic variables, A=1, B=0, C=1. D = (NOT(A) AND (B OR C)) AND (NOT(B OR C)) Write the value of logic variable D on the dotted line. ....................................


5/8

1 point

2015. május 19.



Név: ........................................................... osztály:......

6/8

2015. május 19.



Név: ........................................................... osztály:......

7/8

2015. május 19.


Topic

Név: ........................................................... osztály:......

Maximum points

Question number

PART I Solution of test questions

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.

Points scored

1 1 1 1 2 1 1 1 1 1 1 2 1 SCORE FOR PART I

Maximum points of topic

Points scored in topic

15

15

Correcting teacher Date: ………………………….

pontszáma programba beírt egész számra egész pontszám kerekítve/ / Points (whole Points rounded number) to a whole entered into programme number I. Tesztfeladatok megoldása / Solution of test questions

javító tanár/Correcting teacher

jegyző/Notary

Dátum/Date: ………………………….

Dátum/Date: ………………………….

Megjegyzések: 1. Ha a vizsgázó a II. írásbeli összetevő megoldását elkezdte, akkor ez a táblázat és az aláírási rész üresen marad. 2. Ha a vizsga az I. összetevő teljesítése közben megszakad, illetve nem folytatódik a II. összetevővel, akkor ez a táblázat és az aláírási rész kitöltendő. Comments: 1. If the examinee has commenced the solution of written component II, then this table and signature section will be left empty. 2. If the exam is interrupted while completing component I, and is not continued with the completion of component II, then this table and signature section must be filled out. írásbeli vizsga, I. összetevő 1511

8/8

2015. május 19.

ÉRETTSÉGI VIZSGA ● 2015. május 19.

Név: ........................................................... osztály:......

INFORMATIKAI ALAPISMERETEK ANGOL NYELVEN KÖZÉPSZINTŰ ÍRÁSBELI VIZSGA 2015. május 19. 8:00

II. Időtartam: 150 perc Pótlapok száma Tisztázati Piszkozati Beadott fájlok nevei

A választott feladatsor betűjele

EMBERI ERŐFORRÁSOK MINISZTÉRIUMA

Informatikai alapismeretek angol nyelven

középszint — írásbeli vizsga 1511 II. összetevő


írásbeli vizsga, II. összetevő 1511

Név: ........................................................... osztály:......

2 / 20

2015. május 19.


Név: ........................................................... osztály:......

Important Information •

This examination section also contains an A and a B question sheet, of which you must solve only one. You must indicate your selection on the cover page.

•

In case of exercises where the solution requires one or more source files, the exercise instructions contain the accurate file names as well as any other information needed in respect of their content.

•

In case of exercises where the solution requires you to create one or more files, you will have to save these files to the location specified in the instructions issued at the examination venue. Save the files to the subdirectories corresponding to the number of the given question (QUESTION1, QUESTION2, QUESTION3, QUESTION4).

•

You must save all files related to the solution of the various questions into these directories, and if the instructions of the exercise specifically set out the naming of these files, you must comply with these instructions. If the question dopes not specify specific file names, use names that are easy to interpret.

•

When completing the exercises, if not indicated separately, we assume that the user will enter appropriate format and value data during data entry, and as such there is no need to deal with input verification separately. No additional points will be awarded for these code sections.

•

Where the question’s instructions do not specify a specific output format, strive to present your results in a cultured, but simple form. The format of exported data must also be appropriately interpretable (e.g. integers should not be displayed in exponential form, etc.).

•

If you have made a declaration in advance regarding your software selection, then you must use the software you have indicated in this declaration to complete the exercises.

•

If you are completing the database management exercise in the SQL programming language, and the exercise calls for you to create or upload the database or a given data table, then the SQL source code performing this operation must also be provided in an appropriate text file.


3 / 20

2015. május 19.


Név: ........................................................... osztály:......

Basics of word processing, spreadsheet management and presentation creation

1. Question 1

25 points

a. Advertisement

14 points

Create the one-page real estate advertisement shown in the example. The files needed to complete the exercise: text.txt, photo.png. Save your work in the default format of the word processor under the name advertisement. 1.

Using the word processing programme, open the UTF-8 encoded text.txt text file.

2.

The document’s page orientation should be portrait, with a page size of A4. Set the margins to 3 cm.

3.

Make the following general settings which relate to the whole of the text. − Use only Times New Roman (Nimbus Roman) fonts in the document. − Set the text's font size to 11.5 points. − The line spacing of paragraphs should be 1.1. − Set paragraph indent from the left and the right to 0 cm, and first lines should begin 0.5 cm in. − The text alignment should be justified (where the exercise does not require something else). − Set spaces in front of and after paragraphs to 0 points.

4.

Set the heading font size to 18 points, font colour to white, and font style to bold. Align the title to the centre of the burgundy (colour code RGB(127,0,0)) band. Set the beginning and the end of the band 2 cm from both the right and the left margin.

5.

Set a space of 6 points (0.21 cm) in front of the heading and a space of 18 points (0.63 cm) after.

6.

Insert the photo.png image to the top of the text below the title, and align it to the right. Resize the inserted image to a height of 4 cm while retaining the aspect ratio, and add a burgundy (colour code RGB(127,0,0)), 6 points thick border around the image.

7.

The settings of the paragraph containing the asking price should be identical to the settings of the heading.

8.

Apply a two-column, identical width setting for the texts containing the characteristics and the contact information. Set a vertical separation line to be displayed between the columns.

9.

The first columns should begin with the text “Characteristics”, while the second column with the text ”Contact information”.

10. Align the “Characteristics” and ”Contact information” texts in 4.5 cm wide, un-indented bands each, 0.5 cm to the left from the left side of the bands. Set the band colour to match the burgundy of the heading background. Set font colour to white, and font style to bold. 11. Within the columns, create the bullets shown in the example. In the bullets, set the symbols 0.5 cm in, and set font colour to match the burgundy of the band. The bullet text should begin another 0.5 cm after the symbol. 12. In the four places shown in the example, make the superscript settings for the measurement units.


4 / 20

2015. május 19.


Név: ........................................................... osztály:......

EXAMPLE FOR THE EXERCISE:


5 / 20

2015. május 19.


Név: ........................................................... osztály:......

b. Properties

11 points

The table used for completing the exercise contains the data (postal code, room floorspace, total floor-space and asking price) for a few properties in the area. Using these data, you must determine certain indicators and values for the properties, and you must select the properties that meet a given criterion. When solving the exercise, take the following into account: • Use a formula, function or reference in the solution to get the required results even if the base data are changed. • You can make auxiliary calculations from column P of the worksheet. • If you wish to use the result of an earlier sub-question in another sub-question, but you have not managed to solve the former entirely, use the solution as it is or try to enter data that you feel is very probable. This will allow you to potentially get points fro the sub-question as well. 1.

Load the housedata.txt file, which is UTF-8 encoded and tabulated, so that data placement starts in column A and from the first line. Save the spreadsheet under the name Properties in the default format of the spreadsheet programme.

2.

Set the uniform width for columns A:M to 100 points, and set the height for lines 1:2 to 35 points.

3.

Merge the cells as shown in the example.

4.

Change font style for the content of cells A1:M2 to bold.

5.

Align the content of cells A1:M21 to the cell centre both horizontally and vertically. Perform the wrapping of cell content according to the example.

6.

On of the most widely-used indicators of property price is price per square metre. This is an informative data that allows us to draw conclusions as to how realistic the asking price in the advertisement is compared to the price of properties in the area. Using a formula, in cells I3:I21 determine the price per square metre of the properties.

7.

Using a formula, in cells J3:J21 determine what proportion the total floor-space of the rooms of the various properties is of the entire floor-space of the entire property. Show the results to one decimal place as a percentage.

8.

In cells K3:K21 and L3:L21, using copyable formulas, determine how many full (large) rooms and how many so-called small-rooms there are in the given property. Based on its floor-space, a given room is considered to be a full room if floor-size reaches at least the value written in cell N1. During the completion of the exercise, apply a cell reference for cell N1.

9.

Using the appropriate function, in cells M3:M21 display a “+” sign if the given property has precisely 2 full rooms and 2 small-rooms. In any other case, the cell must remain empty.

10. Apply borders to the table. Add a double solid line outside around the A1:M2 and the A3:M21 area, and a single solid border inside. Format cell content as shown in the example. Make sure that measurement units are also displayed as shown in the example.


6 / 20

2015. május 19.


Név: ........................................................... osztály:......

EXAMPLE FOR THE EXERCISE:


7 / 20

2015. május 19.


Név: ........................................................... osztály:......

2. Renovation

25 points

Tibor is looking to renovate his home. After surveying the rooms of the house, he wants to record the measured data and the flooring materials used in a database. 1. Create a new database under the name Renovation. Create a new table in the database under the name Rooms. Create the table’s fields and file types according to the following. Rooms(name, type, diagonal, length, width, price, disc) name Text, max. 20 characters, name of room, primary key type Text, max. 10 characters, type of planned flooring material diagonal Logical, only true in case of diagonal laying method length Real number, length of room in metres width Real number, width of room in metres price Currency, retail gross price of 1 m2 of flooring material disc Real number, percentage value of discount at purchase 2. Fill the data table with the following data.

Save the solutions for the following questions under the names indicated in the brackets. Make sure that the queries contain only the desired fields and that no unnecessary fields are displayed. In the case of queries, the question parts will only be awarded points if they yield correct answers even with arbitrary data. 3. Create a query that will display the rooms of the house where ‘gres’ flooring tiles will be installed. The list should be in alphabetical order according to the room names. (3Gres) 4. Grouping by flooring material type, determine the total perimeter of the rooms where flooring will be installed. (4Perimeter) 5. Using a query, determine how many rooms there are in the data table whose width or length exceeds 4 metres. (5AboveFour) 6. Using a query, determine the quantity and price of flooring material for rooms where flooring will be laid diagonally. In order to install the tiles diagonally, due to cutting losses the tiler asks for 15% more flooring material, which quantity you must round to a whole number. When determining amounts, take the discount received at purchase into account. (6Rooms) 7. Create a report which displays the room names, lengths and widths grouped by flooring type. Within the groups, sort the lines in alphabetical order according to the room names. (7Report)


8 / 20

2015. május 19.



Név: ........................................................... osztály:......

9 / 20

2015. május 19.


Név: ........................................................... osztály:......

In the case of Questions 3 and 4, you must select between solving Questions A or B. You must indicate your selection on the cover page, in the field marked “Letter of selected question”. 3. A

Binary search

13 points

The following algorithm searches for a number using a binary search algorithm in a vector filled with randomly chosen numbers in ascending order. The algorithm also generates the number searched for randomly. It writes search results on the screen. Encode the algorithm in the selected programming language. You will find comments between ”/*” and ”*/” character pairs, place these into your solution as well. Save the source code of the completed programme under the name BS. When solving the exercise, take the following into account: • The operator for division is “div”. • The ”Long()” function provides the vector’s number of elements. • The ”randNum(min, max)” function generates a random number (min<=randNum<=max) • Depending on the programming language selected, you must use different operators and functions. • The ”Return” command interrupts the function and determines its return value. Function Kozep(also:Integer, felso:Integer):Integer Kozep:=also + (felso-also) div 2 End function Function BinarisKereses(t:Whole vektor, keresett:Integer):Integer Variable a:Integer /*lower index*/ Variable f:Integer /*upper index*/ Variable k:Integer /*middle index*/ a:=0 f:=Long(t)-1 Loop while a<=f k:=Kozep(a,f) If keresett = t[k] then Return k Else If keresett < t[k] then f:=k-1 Else a:=k+1 End if End if End loop BinarisKereses:= -1 /*-1 indicates unsuccessful search*/ End function Programme BK: Variable array v[0..9]:Whole array /*vector*/ Variable i:Integer v[0]:=randNum(1,9) Loop i:=from 1 until Long(v) (+1 step size) v[i]:=v[i-1]+randNum(1,5) írásbeli vizsga, II. összetevő 1511

10 / 20

2015. május 19.


Név: ........................................................... osztály:......

End loop If BinarisKereses(v,randNum(1,30)) <> -1 then Write: ”Found!” Else Write: ”Not found!” End if End programme.


11 / 20

2015. május 19.


4. A

Név: ........................................................... osztály:......

Keszthely Triathlon

22 points

In this exercise, your job is to process the results of the sprint stage of the 2014 Keszthely Triathlon race. When solving the exercise, take the following into account: • Create your programme so that it yields correct results even with arbitrary data. • Before displaying the results of sub-questions that require results to be shown on screen, write the question number on the screen (for example: Question 3:)! • If you request data input by the user, you should also display on the screen what data you require. • When writing the programme, you do not have to verify the correctness and validity of data; you may assume that the data available is in line with the text. • Text without accents is also accepted. The lines of the ANSI-encoded results.txt file contain the data of contestants who have finished the race, along with their time results, separated by semicolons. For example: Mate Nagy;1996;4;m;18-19;00:12:47;00:00:34;00:31:40;00:00:26;00:17:42

The first data is the contestant’s name (text data of maximum 50 characters). The second data is the contestant’s date of birth. The third number is the contestant’s start number (<1000). The fourth data indicates gender code (w = woman, m = man). The fifth data determines contestant category according to age. (The categories: 16-17, 18-19, 20-24, 25-29, 30-34, 35-39, 40-44, 45-49, 50-54, elite, elite junior). The following five time data are the times recorded at the race, as follows: swimming times, first transition time, cycling time, second transition time, running time. Time data are stored in the hour:minute:second format. The winner of the race is the contestant whose time, when the five times are added up, is the lowest. Create a programme under the name KeszthelySprint, which solves the following questions. 1. Read the data from the results.txt file and store these in a data structure that is suitable to solve further exercises. The file contains 100 lines at the most. 2. Determine and show on the screen (as shown in the example) how many contestants finished the race. 3. Determine and show on the screen (as shown in the example) how many contestants raced in the “elite junior” category. 4. Determine and show on the screen the average age of contestants to 1 decimal place. Calculate the age of the various contestants using the 2014 - year of birth formula. 5. Request the user to input a category name, then list the start numbers of contestants racing in that category as shown in the example. If the user inputs a non-existent category, display the “Category does not exist” text. 6. Determine and show on the screen (as shown in the example) who was the winner among women based on the time results. When solving the question, you may assume that there was no tie in the race.


12 / 20

2015. május 19.


Név: ........................................................... osztály:......

Example for the Keszthely Triathlon exercise: Question 2: 94 contestants finished the race. Question 3: The number of contestants in the ’elite junior’ category: 15 people Question 4: Average age: 29.6 years Question 5: Please input a category: elite Start number(s): 101 109 213 Question 6: The best race time was achieved by Dora Fuchs.

Example2: Question 2: 94 contestants finished the race. Question 3: The number of contestants in the ’elite junior’ category: 15 people Question 4: Average age: 29.6 years Question 5: Please input a category: 15-16 Start number(s): Category does not exist! Question 6: The best race time was achieved by Dora Fuchs.

Source: http://keszthelytriathlon.hu


13 / 20

2015. május 19.


3. B

Név: ........................................................... osztály:......

Calculation of a direct current (DC) circuit

Data: R1 = 2 kΩ R4 = 4 kΩ R7 = 1 kΩ

R2 = 8 kΩ R5 = 1 kΩ R8 = 3 kΩ

13 points

R3 = 8 kΩ R6 = 12 kΩ U = 16 V

a. Determine the resultant resistance of the following circuit. b. Determine voltage across the R7 resistance, as well as the current flowing through it and the power appearing across the resistance. c. Indicate voltage direction and current direction across this resistance.

R1

R5

R2

4 points 7 points 2 points

R7

R3 U


R6

R4

14 / 20

R8

2015. május 19.


Név: ........................................................... osztály:......


15 / 20

2015. május 19.


4. B

Név: ........................................................... osztály:......

Design a logic circuit

22 points

We have the logic function in the index form:

F4 =



4

(0;1; 2; 3, 6; 7; 8; 9;10,11;14;15)

The weighting of variables in decreasing order is: A, B, C, D. a. Simplify the logic function using a graphic method. b. Implement the function with NOT, AND and OR gates. (The variables are only available in regular, non-negated form.) c. Implement the function with NAND gates. (The variables are only available in regular, non-negated form.)


16 / 20

14 points 4 points 4 points

2015. május 19.


Név: ........................................................... osztály:......


17 / 20

2015. május 19.


Név: ........................................................... osztály:......


18 / 20

2015. május 19.


Név: ........................................................... osztály:......


19 / 20

2015. május 19.


Név: ........................................................... osztály:......

Question number I. Solution of test questions II/1. Basics of word processing, spreadsheet management and presentation preparation

a) b) TOTAL

Maximum points 15 14 11 25

II/2. Basics of database management

Points scored

25 1. 2. 3. TOTAL

II/3. (A) Algorithm encoding / (B) Electro-technical exercise

II/4 (A) Creation of programme working on input data series / (B) Analogue and digital electronics exercise

1. 2. 3. TOTAL POINTS SCORED IN WRITTEN EXAMINATION

A 13 -

B 4 7 2 13

A 22 -

B 14 4 4 22 100

Correcting teacher

Date: ................................. __________________________________________________________________________

pontszáma egész számra kerekítve/ Points rounded to a whole number

programba beírt egész pontszám / Points (whole number) entered into programme

I. Tesztfeladat megoldása / Solution of test questions II. Számítógépes feladat és számítógéppel végzett interaktív gyakorlat / Computer exercise and interactive practical exercise on computer

javító tanár/Correcting teacher

Dátum/Date: .................................


jegyző/Notary

Dátum/Date: .................................

20 / 20

2015. május 19.

INFORMATIKAI ALAPISMERETEK ANGOL NYELVEN

Recommend Documents