PDX125 Dual CD/MP3/USB/SD Player Ref. nr.: 172.716
INSTRUCTION MANUAL GEBRUIKSAANWIJZING GEBRAUCHSANLEITUNG
UK TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) THERE ARE NO SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash with arrowhead symbol,within an equilateral triangle,is intended to alert the user to the presence of uninsulated ”dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (serviving) instructions in the literature accompanying the appliance. WARNING: 1. Placing a disc with excessive downward force may damage the loader,invalidating the warranty. 2. To reduce the risk of fire or electrical shock,do not expose this appliance to rain or moisture.Electrical equipment should NEVER be kept or stored in damp Environments. DANGER: Invisible laser radiation when open and interlock failed or defeated void direct exposure to beam. CAUTION: This product utilizes a laser. Use of controls or adjustments other than those specified here in may result in hazardous radiation exposure. CAUTIONS REGARDING HANDLING Location Install the player in a well-ventilated location where it will not be exposed to high temperatures or humidity. Do not install the player in a location which is exposed to direct sunlight, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components. Installation of the player in a damp or dusty environment may aiso result in a malfunction and can be hazardous. Avoid installation near cookers etc., where the player may be exposed to oily smoke, steam or heat. Installation Guidelines Placing and using the compact disc player for long periods on heat-generating sources such as amplifiers or near spotlights, etc. will affect product performance. Avoid placing the player on heatgenerating sources. Install this compact disc player as far as possible away from tuners and TV sets. A compact disc player installed in close proximity to such equipment may cause noise or degradation of the picture. Noise may be noticeable when an indoor antenna is used. In such cases, make use of an outdoor antenna or turn off power to the compact disc player. When the unit is used in a loud-sound environment, e.g., near a speaker, sound skip may occur. Install the unit away from the speaker or reduce the listening volume. Place this unit on a level surface and a stable platform. Be sure the player, including its audio and power supply cords, does not touch vibrating materials. Any cause of vibration other than the insulators may cause the disc to skip. Take special care when using the player while it is installed in a carrying case. When this unit is brought into a warm room from previously cold surroundings or when the room temperature rises sharply, condensation may form inside the unit and impair its performance. In such cases, allow the unit to stand for about an hour or raise the room temperature gradually.
About discs created on computers Depending on the application settings and the computer’s environmental settings, it may not be possible to play certain discs. Record the disc in a format supported on this unit. For details, contact your application’s retailer. If the recording quality is poor due to the disc’s properties, scratches or dirt on the disc or dirt on the recording lens, it may not be possible to play the disc. Creating backup discs When CD-R/-RW discs are paused or left in the pause mode at cue points for long periods of time, it may become difficult to play the disc at that point, due to the properties of the disc. Also, when a specific point is looped repeatedly an extremely large number of times, it may become difficult to play that point. When playing valuable discs, we recommend making backup discs.
IMPORTANT Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Cd Player Function 1. Power switch-Turn the machine on and off. (Turn it on before amplifier) 2. JOG WHEELS The jog wheels allow you to fast-forward or rewind within a track and to change the playback speed. Turn the jog wheel clockwise to fast-forward within the track. Turn the jog wheel anti-clockwise to rewind within the track. The faster you turn the jog wheel, the faster the track will skip forwards/backwards. In Playback mode rotate the jog wheel clockwise to increase the speed. Rotate the jog wheel anti-clockwise to decrease the speed. The jog wheel allows you to create scratch effects as well. 3. REVERSE Push the reverse button to play your track in reverse, it’s indicator lights, push the reverse button again to cancel this feature. 4. BRAKE In play mode, push the brake button at first, starts the track at a speed that is slower than normal play back. When you stop the track, the track slows down before playback is stopped completely. 5. TIME BUTTON Use this knob to choose the time mode: elapsed time, remaining time or total remaining time. (With MP3 files the total remaining time of the CD is not displayed. Depends on the model) 6. LOOP IN BUTTON This button stets the beginning of the loop, the loop indicator flashes. 7. LOOP OUT BUTTON When you press this button, you set the end point of the seamless loop and you start the loop. To finish the loop, press again this button. 8. RELOOP BUTTON This button is used to start the last saved loop. To finish the loop, press the re-loop button again. 9. SKIP <
>BUTTON In Folder-mode it is the next folder; in Track-mode the lnext track. Press the keystroke more than 1 second, it will start up double-quick forewards function. 11. FOLDER /TRACK When the lamp lights when you press the button the unit is in Folder state, then press the – or + button, you can choose any folder; otherwise the unit is in Track state, press the – or + button you can choose any track. When the lamp glints you can turn the jog and choose any song. 12. CUE BUTTON Pressing the CUE button during play provides a return to the position at which play was started and will pause the track. Holding down CUE will start playback from this point and releasing CUE will cause it to return to that point. So if the track is paused you can use the JOGWHEEL to locate a new cue point. 13. PLAY/PAUSE BUTTON EACH TIME YOU PRESS THE PLAY/PAUSE BUTTON, THE OPERATION CHANGES FROM PLAY TO PAUSE OR FROM PAUSE TO PLAY 14. AND 16. PITCH BEND –/+ BUTTON The pitch will drop while the - button is pressed and return to the original pitch when it released. The pitch will automatically rise when the + button is pressed and return to the original pitch when it is released. 15. PITCH BUTTON IF YOU PUSH THIS BUTTON, THE ADJUSTEMENT OF THE PITCH POTENTIOMETER IS AVAILABLE 17. DISPLAY LCD INDICATES THE MOST IMPORTANT SETTINGS AND DATA. 18. CD Drawer- BUTTON Place your CD in holder (27). Use commercially CDs or burning CDs at the minimum speed possible 19. VINYL BUTTON When the LED indicator LED lights, dial the jog wheel for SCRATCH function.
