UPS technika. Villamos hálózatok zavaranalízis vizsgálata. Mérésszolgáltatás.
1
DIGYS (EVO-PLUS) UPS általános állapot-felmérés.
01 MÉRÉS Á.0xx.09
DIGYS UPS ellenőrzésre kidolgozott metodika.
Mérési program :
Megrendelő neve:
Mérés azonosító szám :
Címe:
Berendezés telephelye:
A berendezés tipusa:
Szoftveres azonosítási szám:
Üzembiztonsági értékelés :
Vizsgálati alkalom (negyedév):
2009.
Dátum: Ver.: 3.0 / 06-10-30
Utolsó módosítás : 09-03-24 Klímatizáció "TÚLHŰTÖTT" minősítés felvétele.
TÉMÁNKÉNTI értékelés / REFERENCIA UPS : KLIMA
HÁL_RMS
HÁL_FREKV
BATT_ÜZEM
UPS_HASZN UPS_MŰKÖD FOGYASZTÓ
BATTERY
AKT.SZŰRŐ
REF UPS : ami alapján a MINŐSITÉS készült. PÁRHUZAMOS üzemű UPS-sek esetén a ROSSZABB eredményt adó UPS-t nevezzük meg.
* Megfelelősség színkód :
KIVÁLÓ
KIVÁLÓ JÓ
Termikus körülmények. ( Adottság.)
FLUKE hőkamera
LIMIT
Blokk
felső tálca
>19/<23°C
RAYTEK
alsó tálca
>19/<23°C
HIOKI LOGGER ( aktuális léghőm. érték )
19...23°C
DELTA
< 3°C
óra : perc
Megjegyzés :
Nem vizsgált VESZÉLY
Nem vizsgált NINCS
A pirossal kiemelt érték figyelemfelhívó.
RAYTEK lézersugár megvezetésű infra kamera
Akku szekrény
VESZÉLY JÓ
LEFT
Túlhűtött helyiség
RIGHT °C °C °C °C
Aktuális
Klímakészülék hőfénykép
AVG<19° NINCSC
Módosítás
Helyiség fűtés.
Van / Nincs ON / OFF
Helyiség klimatizáció.
Van / Nincs ON / OFF
Beállított hőmérséklet Klíma MIN hőmérséklet Klímatikus pillanatnyi megfelelőség
°C °C Igen / Nem
15%
Megjegyzés :
Blokkszekrény léghőmérséklet mérési adatok. ( Üzemeltetés.) 040911xxx 10
HIOKI 3632-20 SERIAL NUMBER Mintavételi gyakoriság Mintavételi szám ( MAX = 16.000db 10perc gyakoriság mellett.) Elhelyezés ( UPS / BATT.szekrény / Tálca ) LIMIT Hőmérsékleti szélsőértékek MAX 23°C Pontosság : +/ - 0,5°C MIN 19°C AVG 21(+/-2)°C
HIOKI logger
Felső
perc db Tálca °C / Dátum °C / Dátum °C
HŐHIBA áll fenn, ha a léghőmérséklet > 5 óra időtartamra meghaladja a 25°C -ot, vagy a 19°C alatti érték. HIOKI Communicator
Minősítés NINCS Esemény statisztika : BE-lép >25,<19°C <25,>19°C KI-lép
< 25°C
JÓ
>25°C,<5óra
1.alkalom
2.alkalom
<19°C,<5óra
Időtartam MAX v. MIN érték Bekövetkezési időpont Intervallum AVG érték
HIBA HIBA
>25°C,>5óra <19°C,>5óra hó:nap:ó:p hó:nap:ó:p óra
°C hó:nap:ó:p
°C
Minősítés HŐHIBA eseményszám és jellemzői : ( F = FOLYAMATOSAN fennáll.)
HIBA/Nem
Klímatikus viszony negyedéves megfelelőség
Igen / Nem
Időállítás PC órához ELEM kondíció ( Skála : 3 - 2 - 1 - 0 )
Igen / Nem
alkalom
Sáv szám
INVERTER Szervíz Kft. * 1221. Budapest, Panoráma u. 31. * Telefon / Fax : 226-7530 Web : www.inverterszerviz.hu * E-mail :
[email protected] * Cégbírósági bejegyzésszám : 01-09-679258 * Alapítás éve : 1985.
UPS technika. Villamos hálózatok zavaranalízis vizsgálata. Mérésszolgáltatás.
Akusztikus zaj.
LIMIT
UPS tekercselt telj. elem MAX hőmérséklet Ventilátor megfelelőség
2 LEFT
RIGHT °C
< 100°C
Igen / Nem
Megjegyzés :
DISPLAY funkcionalitás.
LEFT
RIGHT
Szinkronizációs funkció
MASTER / SLAVE
Parallel mód szimbólum Készülék sorszám Háttérvilágítás Akusztikus jelzés STATUS Elem feszültség
Jelen / Nincs
1. / 2. NINCS
NINCS
Jó / Nem
ON
ON / OFF
> 2,75V
VDC
DISPLAY megfelelőség
Igen / Nem
Megjegyzés :
UPS kezelési beavatkozás.
LEFT
RIGHT
BATTERY TESZT vizsgálat.SCR_BATT=ON BATTERY TESZT vizsgálat.SCR_BATT=OFF D.E. RESET UPS OFF UPS ON
ó:p ó:p ó:p ó:p ó:p
Megjegyzés :
ESV_x hitelesitő mérés.
FLUKE DMM
LEFT
Mérőeszköz OUTPUT feszültség AUXILIARY feszültség POZ BATT feszültség NEG BATT feszültség Óra pontosság. Napi idő
LIMIT
EXPERT
RIGHT
FLUKE-189
EXPERT
FLUKE-189
VRMS VRMS VDC VDC
< + / - 1% < + / - 1% NÉVL +/ -0,5% NÉVL +/ -0,5% < +/ - 5perc/n.év
UPS óra régi ( NYÁRI/TÉLI ) UPS óra új ( NYÁRI/TÉLI )
Késik/Siet : - / +
Késik/Siet : - / +
ó : min
perc:sec
perc:sec
ó : min ó : min
UPS MÉRÉS/ÓRA megfelelőség TÉLI = október 30.-án 1 óra VISSZA állítás.
Igen / Nem NYÁRI = március 31.-én 1 óra ELŐRE állítás
Megjegyzés :
Szoftveres mérési eredmények. Üzemi körülményeket tükröző adatok.
MAINT.SOFT
LIMIT
LEFT
LEFT
RIGHT
RIGHT
KISÜTÉS t=0
üzemi
KISÜTÉS t=0
üzemi
Remaining BATTERY
Q=I1xT1=I2xT2
perc
POZ BOOST feszültség NEG BOOST feszültség POZ BATT feszültség NEG BATT feszültség
NÉVL +/ -1,0%
VDC VDC VDC VDC
Inverter áram ( IINV ) Aktív power D. ENGINE hőmérsékl. UPS OUT feszültség
NÉVL +/ -1,0% NÉVL +/ -0,5% NÉVL +/ -0,5% * * < 25°C < + / - 1%
POZITIV DC áram * NEGATIV DC áram * 3xQ POZ BATTERY áram 20 ICBLIM x Q20 NEG BATTERY áram INV - MAINS PH.SHIFT < 50,>65.300 UPS paraméter megfelelőség Megjegyzés : * XX_LIM = redukált érték.
A kW / % °C VRMS ADC ADC ADC ADC Igen / Nem A BATTERY töltőáram NEGATIV, a kisütőáram POZITIV előjelű.
INVERTER Szervíz Kft. * 1221. Budapest, Panoráma u. 31. * Telefon / Fax : 226-7530 Web : www.inverterszerviz.hu * E-mail :
[email protected] * Cégbírósági bejegyzésszám : 01-09-679258 * Alapítás éve : 1985.
UPS technika. Villamos hálózatok zavaranalízis vizsgálata. Mérésszolgáltatás.
3
TERHELÉS vizsgálat. UPS kimeneti feszültség és áram időfüggvények.
01
Egyetlen mintavételen alapuló, egyetlen periódust mutató mérés. SINGLE UPS üzemre számított kiterheltségi értékek.
Az időfüggvények megmutatásának célja a feszültség,- és az áram alakok láttatása. Az áramban a meredek di/dt, valamint a KAPACITIV terhelés jelleg veszélyes lehet az üzemre nézve. Ezért vizsgáljuk e két jellemzőt. KAPACITIV terhelés-jelleg esetén a látszólagos teljesítményre teljesüljön az S UPS > 2 x SFOGYASZTÓ arány.
OUTPUT
R -fázis
LIMIT
Fázisfeszültség mért THD-F érték Fázisfeszültség mért CREST érték
1,42
Fázisfeszültség alaki megítélés
THD alapján
Fázisáram mért RMS érték Fázisáram mért CSÚCS érték Fázisáram mért CREST érték Fázisáram mért di/dt érték BYPASS működést a di/dt eredményezett Mért látszólagos terhelés ( S ) Mért hatásos terhelés ( P ) Mért teljesítmény tényező érték Mért u - i null-átmenet idő differencia érték Mért terhelési jelleg KAPACITIV jelleg SUPS / SFOGY illesztettség Kiterheltségi szint ( Smért / SMAX)x100 Kiterheltségi szint ( Pmért / PMAX)x100 Csúcsáramú kiterhelés (IMÉRT / IMAX ) x100 Megjegyzés :
Névleges (SETUP) jellemző
S - fázis
T - fázis
%
<2
Jó / Nem
*
ARMS
*
APEAK - 0
<3 A / ms Nem
Igen / Nem
*
kVA
*
kW
IND=0,8 msec IND / KAP
IND v. ohm >2 100
%
100
%
%
100
** -os LIMIT : KAPACITIV terhelés jelleg mellett.
R - fázis
24%
FLUKE
Helyi jelölés :
SCOPEMETER
S - fázis
Helyi jelölés :
T - fázis
Helyi jelölés :
Megjegyzés :
UPS OUTPUT u - i jellemzők SNAPSHOT-ja.
* DIGYS UPS-ben a STANDARD 4,0A helyett OPCIONÁLIS 8,0A töltés esetén az UPS OUTPUT terhelhetőség a NÉVLEGES 84%-a lehet. ** Ha a TERHELÉSI JELLEG "klasszikus" KAPACITIV, úgy az UPS OUTPUT terhelhetőség a NÉVLEGES érték 50%-a lehet. INVERTER Szervíz Kft. * 1221. Budapest, Panoráma u. 31. * Telefon / Fax : 226-7530 Web : www.inverterszerviz.hu * E-mail :
[email protected] * Cégbírósági bejegyzésszám : 01-09-679258 * Alapítás éve : 1985.
UPS technika. Villamos hálózatok zavaranalízis vizsgálata. Mérésszolgáltatás.
Kapocsfeszültség STATIKUS tartás vizsgálat.
A pirossal kiemelt érték figyelemfelhívó.
EXPERT kapocsfeszültség
NÉVL + / -0,5% NÉVL + / -0,5%
Alapjel hőmérséklet FLUKE DMM
LEFT
LIMIT
UPS kapocsfeszültség szoftveres érték pontosság vizsgálata.
RIGHT VDC VDC
BATT / P BATT / N
Névleges (SETUP) jellemző
Mért NEG elektróda AVG érték Szoftveres cellafeszültség alapjel
4
20
20
2,xx 2xx,x
2,xx 2xx,x
°C °C VDC
23°C +/ - 2°C 2,27 - 2,30
Alapjel D.E. hőmérséklethez tartozó kapocsfeszültség * Mért kapocsfeszültség
NÉVL + / -0,5% NÉVL + / -0,5%
Kapocsfeszültség %-os HIBA
< +/- 0,7% < +/- 0,7%
VDC VDC VDC % %
BATT / P BATT / N BATT / P BATT / N
STATIKUS tartás megfelelősség
Igen / Nem
Megjegyzés :
Csepptöltési körülmény vizsgálat. BATTERY BLOKK feltételezhető kapacitás HIBA ( Q < 80% ) kiszűrés.
Töltőáramkör típus Mért DC kapocsfesz.( FLUKE-189 )
LIMIT
RIGHT
DC/DC
DC-DC/AC-DC
Mért MIN / MAX érték ( szórás ) < +0,27,> -0,10V A * -os jelölés LOW_EXTRA LIMIT meghaladásra utal.
BATT / P BATT / N BATT / P BATT / N BATT / P BATT / N
VDC VDC VDC VDC VDC VDC
EXTRA blokkfeszültség MIN HIBA AVG-0,20V LIMIT : kapocsfeszültségből számított AVG érték - 0,20V
BATT / P BATT / N
BLOKK s.szám
Feszültség eloszlás megfelelősség
BATT / P+N
Igen / Nem
Mért AC kapocsfeszültség Mért MIN-MAX DC kapocsfesz.
0,15VRMS
BATT P / N
NÉVL +/ -0,5%
BATT / P BATT / N
VRMS VDC VDC m m
NÉVL +/ -0,5% NÉVL +/ -0,5%
Számított AVG blokkfeszültség FLUKE DMM
( FLUKE-189 )
NÉVL +/ -0,5%
REFERENCIA érték és szórás BLOKK impedancia HIBA határ
SZÓRÁS
m
< AVG_EREFx1,25
Számított AVG_*E blokkimpedancia
A * -os jelölés EXTRA_MAX_LIMIT meghaladásra utal.
BLOKK s.szám
EGYÜTTES
A PIROS jelölés LOW / HIGHT_LIMIT meghaladásra utal.
HIOKI 3550
LEFT
DC/DC
m m m
EGYÜTTES AVG_*E +/ - 5%
Számított AVG_E blokkimpedancia
SZÓRÁS EGYÜTTES
EXTRA_MAX_LIMIT blokkimp. (nyúlás) HIBA
BATT / P BATT / N
BLOKK s.szám
EXTRA_MAX_LIMIT = MINIMUN blokk + 3 x %_LIMIT (m
% IMPEDANCIA mért MAX_HIBA % IMPEDANCIA mért MAX_HIBA
BATT / P BATT / N
% %
Impedancia megfelelősség
< saját x1,25 < saját x1,25
szórás és HIBA BATT / P+N
Feltételezhető BLOKK KAPACITÁS HIBA
BATT / P+N
BLOKK s.szám
Igen / Nem Igen / Nem
Megjegyzés : ha az EXTRA_MAX_LIMIT meghaladja a "BLOKK impedancia HIBA határ" értéket, akkor az "Impedancia megfelelősség és a Feltételezhető blokk KAPACITÁS HIBA" minősítése : NEM. ÜZEMBIZTONSÁGI szempontból a P + N TELEP-ekben 1 + 1 db KAPACITÁS HIBÁS BLOKK megengedhető. A további lehetséges egy-két darabszám a tényleges kisütő áram és a BLOKK Ah kapacitás függvénye.
Akkumulátorral kapcsolatos jellemzők. Típus Kapacitás Q10 / Q20 ( általában 1,80V-os végfeszültség mellett ) Ah Ajánlott (Q20 / 20…3 x Q20) / kisütőáram ADC UPS BATTERY töltőáramkör típus ( STANDARD vagy OPCIONÁLIS ) STD / OPC Várható élettartam ( a kezdeti kapacitás 80%-át tudva ) év Üzembe helyezési időpont LEFT : 200x.xx.hó, RIGHT : 200x.xx.hó
INVERTER Szervíz Kft. * 1221. Budapest, Panoráma u. 31. * Telefon / Fax : 226-7530 Web : www.inverterszerviz.hu * E-mail :
[email protected] * Cégbírósági bejegyzésszám : 01-09-679258 * Alapítás éve : 1985.
UPS technika. Villamos hálózatok zavaranalízis vizsgálata. Mérésszolgáltatás.
5
UPS üzemviteli esemény értékelés összesítés.
01
Az UPS eseménynaplója alapján készített összesítés
REFERENCIA UPS
LIMIT
* AUXILIARY feszültség HIBA 15%
20% * AUXILIARY frekvencia HIBA > 1% * INPUT CIKLUS detekciós HIBA >10% * HÁLÓZATI SZINKRON HIBA (PLL_LOCKED=0) 2
Egység
LEFT
RIGHT alkalom alkalom alkalom alkalom alkalom
VRMS VRMS Hz Hz alk
* HÁLÓZAT RMS feszültség HIBA besorolás <6/6-12/>12 alk * HÁLÓZAT FREKVENCIA HIBA besorolás 0/<2/>2 alk * CAN_BUS kommunikációs HIBA >16sec 2 alk * // CAN_BUS komm.kációs HIBA >16sec 2 alk * PROC. programfutási vagy I2C HIBA 2 alk * Működés KONTROL bejegyzés NINCS alk * TRANSZFER nem lehetséges (BYPASS_LOCKED_TO) 2 alk * UPS OUTPUT TERM. TÚLTERHELÉS >100% ARMS * UPS OUTPUT DIN. TÚLTERHELÉS >100% APEAK * UPS FESZÜLTSÉG MASZK (alaki) HIBA < 80% V(t) * UPS OFF vagy ON MAINS irányon van 0/2 alk * UPS üzem : Berendezés (B) & HÁLÓZAT-i (H) & FOGYASZTÓ-i (F) hatás
A/B/C A/B/C alkalom alkalom alkalom alkalom alkalom alkalom alkalom alkalom alkalom
A/B/CB-H-F A/B/C
* BATTERY üzem ( Időtartam-Eseményszám-Töltés ) A limit-határokat lásd külön * HŐHIBA esemény 25°C <5óra ( F = FOLYAMATOSAN fennáll.)
alkalom
25°C
>5óra
alkalom/óra
19°C
>5óra
alkalom/óra
* KLIMA üzem >25°C,<19°C 0/<5ó/>5ó * Esemény szám (HÁLÓZAT + HŐHIBA) < 6+0 * Átfogott időtartomány 1
alk
A/B/C
alk
alkalom hó - nap
n.év
200x.
Megjegyzés : az első szám az ÖNÁLLÓ előfordulásra utal, míg a második TÁRSULT eseményt jelöl.
Minősítési LIMIT-határok : HÁLÓZAT Kategória Negyedév RMS A < 6 alk. B < 12 alk. C > 12 alk. PLL A 0 alk. B 2 alk. C > 2 alk.
UPS üzem
Kategória
Negyedév
A B C
0 alk.
KLIMA
Kategória
Negyedév
A B
>25°C,<5óra
2 alk. > 2 alk.
0 alk. <19°C,<5óra
C C
<19°C,>5óra >25°C,>5óra
UPS MAX (100%-os) FÁZIS paraméterek : cos = 0,8 és INDUKTIV jellegű terhelés, valamint STANDARD ( 4A ) áramú BATT_CHARGER melletti határadatok
S P IRMS IPEAK IBOOST
10 8 43 129 31
15 12 65 195 47
20 16 86 258 62
30 24 130 390 94
40 32 174 522 124
60 48 260 780 188
kVA kW ARMS APEAK ADC
IBOOST áram : 90%-os INVERTER hatásfok és 4A-es BATTERY töltőáram mellett, 400VDC-én számítva.
Szoftveres egyéb feladatok. (EXPERT x.xx) MEASUREMENTS MODUL mentés. (.GIF) STATUS_ON MODUL mentés. (.GIF) ALL_SETTING MODUL mentés.(.EEP/.TXT) HISTORY MODUL mentés file-ba. HISTORY eseményszám HISTORY MEMÓRIA RESET.
LEFT
RIGHT Igen/Nem Igen/Nem E_T/Nem Igen/Nem db Igen/Nem
INVERTER Szervíz Kft. * 1221. Budapest, Panoráma u. 31. * Telefon / Fax : 226-7530 Web : www.inverterszerviz.hu * E-mail : [email protected] * Cégbírósági bejegyzésszám : 01-09-679258 * Alapítás éve : 1985.
UPS technika. Villamos hálózatok zavaranalízis vizsgálata. Mérésszolgáltatás.
6
BATTERY üzemszerű használat mínősítés. ( MASTER UPS eseménynaplója alapján készített összesítés)
Az adott helyre jellemző, üzemi DC kisütőáram melletti értékelésmód. Az értékelés a TELEP igénybevételt az üzembiztonság oldaláról vizsgálja. A túl hosszú és/vagy túl gyakori kisütési alkalmak biztonsági problémákat vethetnek fel. Napi és heti eseményszámokat vizsgálunk, továbbá ellenőrizzük, hogy a mindenkor szükséges visszatöltési idő rendelkezésre állt-e ? Bármely kategóriában a LIMIT -et meghaladó eseményszám esetén HIBA ( C - osztály) minősítéssel élünk. Névleges (SETUP) jellemző
"BATTERY BATT(10h) Üzemi/NÉVL
üzem" értékelés az időtartam és az összesített eseményszám alapján. REFERENCIA UPS : xAh
<5
< 10
< 20
< 30
< 60
idő perc-ben alkalom
x/A
NÉVL idő(p)
NINCS
HETI LIM alk Ah LIM
NINCS
napi LIMIT Ah LIMIT/alk
NINCS
Ah LIMIT/nap
NAPI legrosszabb eset HETI legrosszabb eset
x X(Y)
esemény esemény
Megjegyzés : a legnagyobb TELEP igénybevétel kiválasztása NAPI illetve HETI viszonylatban. Heti legrosszabb eset : X(Y) jelentése : egy héten X alkalommal fordult elő akku kisütés, ami a hét Y napját érintette.
UPS "All Settings" beállítással kapcsolatos észrevétel. LEFT
RIGHT OLD
OLD
1. 2. 3. 4. 5. Megjegyzés :
Egyéb feladatok. ( Vizualitás.)
LEFT
RIGHT
Elektronikai pcb. vizuális ellenőrzése.
Igen/Nem
TERMINAL pont hőkamerás ellenőrzése.
Igen/Nem
UPS tisztítás Külső - Belső
K / B / Nem
BATTERY elektróda hőkamerás kontaktus vizsgálata.
Igen/Nem
BATTERY elektróda és szelep savszivárgás vizsgálat.
Igen/Nem
REMOTE DISPLAY HISTORY_LOG memória RESET.
Igen/Nem
Megjegyzés :
OPCIONÁLIS kommunikáció. HARDVER
DRY
REMOTE
RS232-PC
NET-VISION
MOBIL
típus
CONTACT
DISPLAY
LOCAL
NETWORK
SMS
Jelen van
----
Használva
E.S.D. működés Igen / Nincs Igen / Nem
Megjegyzés : MOBIL SMS küldés csak a MASTERYS UPS családnál működik.
FULL program szerinti UPS mérés technikai felvonulás látképe.
INVERTER Szervíz Kft. * 1221. Budapest, Panoráma u. 31. * Telefon / Fax : 226-7530 Web : www.inverterszerviz.hu * E-mail : [email protected] * Cégbírósági bejegyzésszám : 01-09-679258 * Alapítás éve : 1985.
UPS technika. Villamos hálózatok zavaranalízis vizsgálata. Mérésszolgáltatás.
7
Akkumulátor kisütéses vizsgálattal kapcsolatos összefoglalás. HK hőmérséklet korrekció csak 19°C alatti mért léghőmérsékletre történik.
* *
Tesztelt egység / Termikus mérési körülmény ( 20°C / HK )
* * * * * *
Kisütés DC oldali szabályozott műterheléssel Kisütés leválasztott teleppel (L) / üzem fenntartással (Ü) Profil : állandó áram (Á) / teljesítmény (T) / egyedi (E) TORKEL árammérés mód mV/A Blokk / Cella szám BATT / P Blokk / Cella MIN végfeszültség (2) BATT /N A * -os jelölés LOW_EXTRA LIMIT meghaladásra utal.
*
Kivett kapacitás
*
Kisütési időtartam
01 MÉRT érték SETUP érték NÉVL / HK
19 ... 23
Mért pillanatnyi MIN-MAX LOGGER tálca hőmérséklet Mért pillanatnyi szabadbeli léghőmérséklet (érdekesség)
* * *
Munkaponti AVG kisütő áram Munkaponti AVG kisütő áram Blokk végfesz. MIN megfelelősség
BATT / N
perc/HK°C
Ah/HK°C
BATT / P BATT / N
100
% %HK ADC
>10,80V >10,80V
Igen / Nem
BATT / P BATT / N
(1)
< 80% kapacitás adottságú BLOKK
*
EXT/INT Db VDC_CELLA VDC_BLOKK
perc/20°C
HIBÁS blokk azonosító ( < 80% )
*
<35/210 1,80 10,80
BATT / N BATT / P
(2)
A PIROS jelölés LOW/HIGHT_LIMIT meghaladásra utal.
* * *
L/Ü Á/T/E
(2)
Végfeszültség homogenitás megfelelősség
*
Á
Ah/20°C
> 10,80V végfeszültség és > 80% kapacitás adottság
*
Igen / Nem
BATT / P
Névleges (SETUP) jellemző
BATTERY teljesítmény
Igen
(2)
A HK érték hőmérséklet(H) korrigált(K) adat.
*
°C °C/HK°C
BATT / P BATT / N BATT / P BATT / N
<+/ - 0,10V Igen / Nem <+/ - 0,10V Igen / Nem
BATT / P BATT / N
C1…D8(H8)
Igen / Nem
A1…B8(H4)
AKTUÁLIS üzemi kisütő áram ( P=párh / S=szóló UPS ) AKTUÁLIS üzemi áthidalási idő ( P / S ) MINIMUM/NÉVL.
ADC/TELEP
Töltési karakterisztika A = I - U2, B = I - U1 - U2 / HŐKOMP Áramkorlát ( ADC / % Q10 ) Töltőáramkör / Töltés INDUL EXT / INT U1 KAPOCS / BLOKK / CELLA ( EXPERT ) 230,40 U1 - U2 feszültség váltás áram értéke ( % Q10 ) U2 KAPOCS / BLOKK / CELLA ( EXPERT ) 220,80 BATT / P MÉRT áramkorlát érték ( SCXI / EXPERT ) BATT / N MAX - MIN értékek BATT / P CSEPPTÖLTÉSI KAPOCS feszültség BATT / N elérési idő és feszültség érték
A-B/ON-OFF
CSEPPTÖLTÉSI KAPOCSFESZÜLTSÉG eléréséig visszatöltött kapacitás ÁRAMGENERÁTOROS töltési végidő és kapcsolódó k.feszültség érték Áramgenerátoros töltési időhöz tartozó visszatöltött kapacitás U1 feszültségen tartózkodási időtartam és vég k.feszültség érték U2 feszültségű töltésre kapcsolás időpontja és a kapcsolódó áram érték
(1) A HIBÁS ( < 80% ) blokkot NEM számítva.
perc/UPS
14,40
2,40
13,80
2,30
220,80 220,80
BATT / P BATT / N BATT / P BATT / N BATT / P BATT / N BATT / P BATT / N BATT / P BATT / N
ADC/ % ó:p VDC_20°C ADC - %Q10 VDC_20°C ADC ADC ó : p / VDC ó : p / VDC Ah / ó Ah / ó ó : p / VDC ó : p / VDC Ah / ó Ah / ó ó : p / VDC ó : p / VDC ó : p / ADC ó : p / ADC
(2) A MEZŐ SZIN a kapacitás állapotot fejezi ki. Pl.: PIROS mező : <80% esetén.
Megjegyzés : a NÉVLEGES áthidalási idő az UPS által számolt érték, 100%-os állapotú BATTERY -t feltételezve. A "MINIMUM" eredmény a leggyengébb BLOKK kapacitás állapotához tartozó áthidalási idő jellemző. Megjegyzés : amennyiben a mérési eredmény és körülmény lehetővé teszi, úgy a JOBB állapotú TELEP ( P v. N ) 80%-os LIMIT elérhetőségét feltételezzük. Erre utal az eredmény melletti "F" jelölés.
INVERTER Szervíz Kft. * 1221. Budapest, Panoráma u. 31. * Telefon / Fax : 226-7530 Web : www.inverterszerviz.hu * E-mail : [email protected] * Cégbírósági bejegyzésszám : 01-09-679258 * Alapítás éve : 1985.