KEMENTERIAN KEHUTANAN DIREKTORAT JENDERAL PERLINDUNGAN HUTAN DAN KONSERVASI ALAM
BALAI TAMAN NASIONAL GUNUNG MERAPI Jl. Kaliurang Km.22,6 Hargobinangun, Pakem, Sleman Yogyakarta Telp/Fax. (0274) 4478664/447866
BERITA ACARA PENJELASAN PEKERJAAN ( ANVULIING ) Nomor Tanggal Pekerjaan
: BA. 02 /TNGM-1.1.1/PPDK/2012 : 28 Maret 2012
: Pengadaan Perangkat Pengolah Data dan Komunikasi
Pada hari ini Rabu tanggal dua puluh delapan bulan Maret tahun Dua Ribu Dua Belas bertempat di ruang Sekretariat panitia PBJ Balai Taman Nasional Gunung Merapi, Jln. Kaliurang KM. 22,6 Hargobinangun, Pakem, Sleman, D.I Yogyakarta telah dilaksanakan Rapat Penjelasan Pekerjaan melalui lpse Pengadaan Perangkat Pengolah Data dan Komunikasi seperti tersebut di atas.
Rapat dimulai pukul 10.00 WIB, dipimpin oleh Hardiyono,S.Hut.T selaku Ketua Panitia Pengadaan Barang/Jasa. Dengan acara sebagai berikut : 1. Penjelasan Pekerjaan : Panitia 2. Tanya Jawab : Calon Penyedia kepada panitia dengan LPSE. Rapat dihadiri oleh : 1. Panitia Pengadaan Barang/Jasa Balai Taman Nasional Gunung Merapi Tahun Anggaran 2012
II. Unsur Penyedia Barang/Jasa : 16 Calon Penyedia yang telah mendaftar melalui Layanan Pengadaan Secara Elektronik (LPSE) Pokok-pokok penjelasan pekerjaan sebagai berikut : BAB I. UMUM A. Dasar Penyusunan Dokumen .................................................................... B. Pengertian, Istilah dan Singkatan .............................................................. C. Sumber Pendanaan …………………………………………. .................
tetap tetap tetap
BAB II. PENGUMUMAN PELELANGAN UMUM DENGAN PASCA KUALIFIKASI 1. 2. 3. 4.
Paket Pekerjaan ........................................................................................ Persyaratan Peserta……. .......................................................................... Pelaksanaan Pengadaan ............................................................................ Jadwal Pelaksanaan Pengadaan …………………………………………
tetap tetap tetap tetap
BAB III. INSTRUKSI KEPADA PESERTA (IKP) A. UMUM 1. Lingkup Pekerjaan ..........................................................................................
tetap
2. 3. 4. 5. 6. 7.
Sumber Dana .................................................................................................. Peserta Pemilihan ............................................................................................ Larangan Korupsi, Kolusi dan Nepotisme serta Penipuan ............................. Larangan Pertentangan Kepentingan .............................................................. Pendayagunaan Produksi Dalam Negeri ....................................................... Satu Penawaran Tiap Peserta .........................................................................
tetap tetap tetap tetap tetap tetap
B. DOKUMEN PENGADAAN 8. Isi Dokumen Pengadaan ................................................................................. 9. Bahasa Dokumen Pengadaan .......................................................................... 10. Pemberian Penjelasan ..................................................................................... 11. Perubahan Dokumen Pengadaan..................................................................... 12. Perubahan Waktu ............................................................................................
tetap tetap tetap tetap tetap
C. PENYIAPAN DOKUMEN PENAWARAN DAN KUALIFIKASI 13. Biaya dalam Penyiapan Penawaran dan Kualifikasi ....................................... tetap 14. Bahasa Penawaran .......................................................................................... tetap 15. Dokumen Penawaran..... : - Point b. Ditambahkan jaminan penawaran yang dimasukkan dalam file penawaran adalah hasil sca sedangka aslinya dikirim via pos Kepada panitia Pengadaan barang/Jasa Balai taman Nasional gunung Merapi Jl. Kaliurang Km. 22,6 Banteng, Hargobinangun, Pakem, Sleman (55582) paling lambat cap pos tanggal batas akhir pemasukan dokumen penawaran. - point d.4 Jaminan Purna jual ditambah Jaminan purna Jual dikeluarkan oleh peserta/penyedia berupa surat pernyataan kesanggupan untuk memberikan jaminan purna jual dari pabrikan bila ditetapkan sebagai pemenang (bermeterai 6000) - dukungan purna jual untuk semua jenis barang yang akan diadakan. 16. Harga Penawaran ............................................................................................ tetap 17. Mata Uang Penawaran dan Cara Pembayaran ................................................ tetap 18. Masa Berlaku Penawaran dan Jangka Waktu Pelaksanaan ............................ tetap 19. Pengisian Dokumen Isian Kualifikasi ............................................................. tetap 20. Pakta Integritas................................................................................................ tetap 21. Jaminan Penawaran (unconditional) ............................................................... tetap 22. Bentuk Dokumen Penawaran .......................................................................... tetap D. PEMASUKAN DOKUMEN PENAWARAN 23. Penyampulan dan Penandaan Sampul Penawaran .......................................... 24. Penyampaian Dokumen Penawaran ................................................................ 25. Batas Akhir waktu Pemasukan Penawaran ..................................................... 26. Penawaran Terlambat......................................................................................
tetap tetap tetap tetap
E. PEMBUKAAN DAN EVALUASI PENAWARAN 27. Pembukaan Penawaran ................................................................................... tetap 28. Evaluasi Penawaran 28.12.b.2.d. Jaminan Purnajual untuk Semua Item Barang. Untuk plotter disertakan surat pernyataan kesanggupan memberikan pelatihan operasional/penggunaan plotter di atas meterai 29. Evaluasi Kualifikasi ........................................................................................ tetap 30. Pembuktian Kualifikasi ................................................................................... tetap F. PENETAPAN PEMENANG PELELANGAN 31. Pengumuman Pemenang ................................................................................. 32. Sanggahan ....................................................................................................... 33. Sanggahan banding .........................................................................................
tetap tetap tetap
G. PENUNJUKAN PEMENANG 34. Penunjukan Penyedia/Jasa .............................................................................. 35. BAHP dan Kerahasiaan Proses .......................................................................
tetap tetap
H. PELELANGAN GAGAL 36. Pelelangan Gagal ............................................................................................
tetap
I. SURAT JAMINAN PELAKSANAAN 37. Surat jaminan Pelaksanaan .............................................................................
tetap
J. PENANDATANGANAN KONTRAK 38. Penandatanganan Kontrak ..............................................................................
tetap
BAB IV. LEMBAR DATA PEMILIHAN A. LINGKUP PEKERJAAN ......................................................................... B. SUMBER DANA...................................................................................... C. METODE PEMILIHAN ........................................................................... D. PESERTA YANG DAPAT MENGIKUTI PEMILIHAN ........................ E. PEMBERIAN PENJELASAN DOKUMEN PENGADAAN .................. F. PENINJAUAN LAPANGAN .................................................................. G. MATA UANG PENAWARAN DAN CARA PEMBAYARAN ............. H. MASA BER;LAKUNYA PENAWARAN ............................................... I. JAMINAN PENAWARAN ...................................................................... J. JADWAL PEMASUKAN DOKUMEN PENAWARAN ........................ K. BATAS AKHIR WAKTU PENYAMPAIAN PENAWARAN ............... L. PEMBUKAAN PENAWARAN............................................................... M. EVALUASI PENAWARAN .................................................................... N. SANGGAHAN, SANGGAHAN BANDING DAN PENGADUAN ....... O. JAMINAN SANGGAHAN BANDING ................................................... P. JAMINAN PELAKSANAAN ..................................................................
tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap
BAB V. LEMBAR DATA KUALIFIKASI (LDK) A. Lingkup Kualifikasi .................................................................................. tetap B. Persyaratan Kualifikasi 1. Tetap 2. Tetap 3. Tetap 4. Memiliki NPWP dan telah memenuhi kewajiban perpajakan tahun pajak terakhir (SPT tahun 2011) serta memiliki laporan bulanan PPh Pasal 21, Pasal 23 (bila ada transaksi), PPh Pasal 25/Pasal 29 dan PPN (bagi pengusaha kena pajak) paling kurang 3 (tiga) bulan terakhir dalam tahun berjalan (Desember 2011, Januari 2012 dan Februari 2012). 5. Tetap 6. Tetap BAB VI. BENTUK DOKUMEN PENAWARAN A. BENTUK SURAT PENAWARAN.......................................................... B. BENTUK DOKUMRN PENAWARAN TEKNIS ................................... C. BENTUK FORMULIR TINGKAT KOMPONEN DALAM NEGERI ... D. BENTUK JAMINAN PENAWARAN DARI BANK.............................. E. BENTUK JAMINAN PENAWARAN DARI ASURANSI/ PERUSAHAAN PENJAMINAN ............................................................. BAB VI.1. PETUNJUK PENGISIAN FORMULIR ISIAN KUALIFIKASI A. Data Administrasi .....................................................................................
tetap tetap tetap tetap tetap
tetap
B. C. D. E. F. G.
Izin Usaha ................................................................................................. Izin Lainnya (apabila dipersyaratkan) ...................................................... Landasan Hukum Pendirian Badan Usaha ................................................ Pengurus .................................................................................................... Data Keuangan .......................................................................................... Data Pengalaman Perusahaan ...................................................................
tetap tetap tetap tetap tetap tetap
BAB VII. TATA CARA EVALUASI KUALIFIKASI A. Tetap B. Tetap C. Tetap D. Tetap BAB VIII. BENTUK KONTRAK A. BENTUK SURAT PERJANJIAN ............................................................ B. BENTUK SURAT PERINTAH KERJA .................................................. BAB IX. SYARAT-SYARAT UMUM KONTRAK (SSUK) A. KETENTUAN UMUM ............................................................................ B. PELAKSANAAN PENGADAAN, SERAH TERIMA, AMANDEMEN DAN PEMUTUSAN KONTRAK ............................................................ C. HAK DAN KEWAJIBAN PENYEDIA ................................................... D. HAK DAN KEWAJIBAN PEJABAT PEMBUAT KOMITMEN ........... E. PENYELESAIAN PERSELISIHAN........................................................
BAB X.SYARAT-SYARAT KHUSUS KONTRAK A. Pengertian ................................................................................................. B. Korespondensi........................................................................................... C. Wakil Sah para Pihak ................................................................................ D. Tanggal Berlaku Kontrak .......................................................................... E. Waktu Dimulainya Pekerjaan ................................................................... F. Kerjasama Antara Penyedia dan Sub Penyedia ........................................ G. Transportasi............................................................................................... H. Serah Terima ............................................................................................. I. Pemeriksaan dan Pengujian ...................................................................... J. Garansi ...................................................................................................... K. Pemutusan oleh Penyedia Jasa .................................................................. L. Tindakan Penyedia yang Mensyaratkan Persetujuan PPK ....................... M. Waktu Penyelesaian Pekerjaan ................................................................. N. Pembayaran Uang Muka ........................................................................... O. Pembayaran Prestasi Kerja ....................................................................... P. Pembayaran denda .................................................................................... Q. Pencairan jaminan ..................................................................................... R. Kompensasi ............................................................................................... S. Harga kontrak............................................................................................ T. Penyelesaian Perselisihan .........................................................................
tetap tetap
tetap tetap tetap tetap tetap
tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap tetap
BAB XI. SPESIFIKASI TEKNIS 1. Pengadaan laptop 7 (tujuh) unit ................................................................ tetap 2. PC + UPS 5 (lima) unit ............................................................................. tetap 3. Printer 5 (lima) unit ................................................................................... tetap 4. Printer A3 + UPS 1 (satu) unit .................................................................. tetap 5. Plotter 1 (satu) unit.................................................................................... tetap 6. Pengadaan kamera DSLR (body only) 1 (satu) unit, Tele converter 1 (satu)
Unit, Lensa Mikro 85 mm 1 (satu) unit, Lensa wide Angle 1 (satu) unit, Speedlight 1 (satu) unit 7. Pengadaan kamera Digital 7 (tujuh) unit spesifasi ditambah memory, 4 GB cassing (tempat kamera). 8. Pengadaan Camcorder/kamera video 1 (satu) unit ................................... tetap 9. Pengadaan Server Database + 3 harddrive + 1 Controller + 1 Monitor + OS web server original + 1 UPS dan untuk memori server dirubah menjadi 12 GB.
BAB XII. DAFTAR KUANTITAS DAN HARGA......................................
NO
1.
JENIS BARANG
Laptop
tetap
SPESIFIKASI Platform
Notebook PC
Processor Type
AMD Phenom II
Processor Onboard
AMD Phenom™ II Triple-Core Mobile Processors P860 (2 GHz, Cache 512 KB)
Chipset
AMD M880G
Standard Memory
2 GB DDR3 PC-8500
Max. Memory
8 GB (2 DIMMs)
Video Type
ATI Mobility Radeon HD 5470 512 MB
Display Size
14" WXGA LED
Display Max. Resolution
1366 x 768
Display Technology
Clear SuperView LED
Audio Type
Integrated
Speakers Type
Integrated
Hard Drive Type
320 GB Serial ATA 5400 RPM
Optical Drive Type
DVD±RW
Modem
Optional
Networking
Integrated
Network Speed
10 / 100 Mbps
Wireless Network Type
Integrated
Wireless Network Protocol IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Wireless Bluetooth
Integrated
Keyboard Type
QWERTY 82 keys
VOL
7 unit
HARGA JUMLAH SATUAN
2.
3.
PC + UPS
Printer
Input Device Type
Touch Pad
Card Reader Provided
SD, MMC, Memory Stick / Stick PRO
Interface Provided
2x USB 2.0. eSATA/USB, VGA, HDMI, LAN, Audio Webcamera
O/S Provided
Win 7 Home Premium
Battery Type
Rechargeable Lithium-ion Battery 6 Cell
Power Supply
External AC Adapter
Dimension (WHD)
340 x 38 x 232 mm
Weight
2.3 kg
Standard Warranty
1-year Limited Warranty by Authorized Distributor
a. PC Platform Desktop PC, Processor Type Intel Core-i5 Processor, Processor Onboard Intel® Core™ i5-2400 Processor (3.10 GHz, Cache 6MB) Chipset Intel® H61, Standard Memory 2 GB DDR3 PC-10600, Video Type ATI Radeon HD 6450 1GB, Audio Type Integrated, Hard Drive Type 1TB Serial ATA, 7200RPM Optical Drive Type DVD±RW Networking Integrated 10/100/1000 LAN Network Speed 10 / 100 / 1000 Mbps Keyboard Type USB Keyboard Input Device Type Optical Mouse Card Reader Provided 6 in 1 Media Reader Interface Provided • 6x USB 2.0, VGA, DVI-D, LAN, Audio O/S Provided Win 7 HP Power Supply Type300W Standard Warranty1-year Limited Warranty by Authorized Distributor
5 unit
b. UPS Output Power Capacity 300 Watts / 500 VA Output Power Voltage 230 V Input Power Voltage 230 V Input Frequency : 50 Hz Surge Energy Rating240 Jouls Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time : 10 hours Dimensions115 x 185 x 213 mm (WxHxD) Weight4.90 kg Form FactorPC
5 unit
Platform
Business InkJet
Printing Method
InkJet
5 unit
4.
Printing Technology
On-demand ink jet (piezoelectric)
Max. Media Sizes
A4
Max. Resolution
5760
Effective Print Resolution
5760 x 1440 dpi (with Variable-Sized Droplet Technology)
Print Speed Black
27 ppm
Print Speed Color
15 ppm
PC Connectivity
USB
OS Compatibility
Windows XP/XP Professional x64 Edition/Vista/7 (No Mac OS Support)
Network Supports
Not Available
Input Tray #1
100 sheets
Compatible Media Sizes
A4
Duplex Printing
Not Available
AC Adapter
220-240V, 50~60Hz
Weight
2.8 kg
Package Contents
Contents may vary
Warranty
1-year Limited Warranty by Authorized Distributor
Printer A3 a. Printer + UPS Platform
Business InkJet
Printing Method
InkJet
Printing Technology
Thermal Inkjet
Max. Media Sizes
A3
Max. Resolution
4800
Effective Print Resolution
Up to 4800 by 1200 optimized dpi color
Print Speed Black
33 ppm
Print Speed Color
32 ppm
Monthly Usage Volume
Up to 7,000 pages
1 unit
PC Connectivity
USB
OS Compatibility
Windows® XP® Service Pack 2, Windows Vista®, Windows 7, Mac OS X v10.5, v10.6
Processor
192 MHz
Memory Standard
128 MB
Max. Memory Capacity
128 MB
Language Supports
HP PCL 3 GUI
Network Supports
Available
Network Device
Ethernet, WiFi 802.11b/g
Input Tray #1 •
150 sheets 35-sheet ADF
Media Type
Paper (brochure, inkjet, plain); photo; envelopes; cards (index); transparencies
Compatible Media Sizes
A5, B5, executive, A4, letter, legal, tabloid, Hagaki, B7, 4 by 6 in, 10 by 15 cm, HV, A6, 2L, cabinet, 13 by 18 cm, 5 by 7 in, Ofuku Hagaki, 8 by 10 in, B4, 11 by 14 in, A3, 12 by 12 in, A3, Super B, A3+
Duplex Printing
Not Available
Facsimile Function
• •
3 sec per page Fax speed, Fax memory Up to 100 pages, Resolution (black and white), Up to 300 x 300 dpi, Maximum speed dialing numbers, Up to 110 numbers, Auto-redialing 48 Broadcast locations
Copier Function
•
Copy speed (black), Up to 33 cpm, Copy speed (color), Up to 32 cpm, Copy resolution (black graphics), Up to 1200 optimized dpi from 600 input dpi, Copier resize, 25 to 400%, Maximum copies o Up to 100 copies
Scanner Function
•
Scan type Flatbed, ADF, Optical scanning resolution, Up to 4800 dpi, Scan size, maximum (flatbed), 8.5 x 14 in, Scan size, maximum (ADF) o 8.5 x 14 in
Power Consumption
•
Maximum, 50 watts, Active 15 watts, Best mode 20 watts, Normal mode 26 watts, Fast Draft mode Off 0.75 watts Sleep 4.1 watts
AC Adapter
100 to 240 VAC, 50/60 Hz
Dimension (WHD)
606 x 293 x 426 mm (W x H x D)
Weight
14 kg (30.8 Ib)
Package Contents
Contents may vary
Warranty
1-year Limited Warranty by Authorized Distributor
Others
•
Compatible with o HP 920XL (CD975AA) o HP 920XL (CD972AA) o HP 920XL (CD973AA) o HP 920XL (CD974AA)
-
Black Officejet Ink Cartridge Cyan Officejet Ink Cartridge Magenta Officejet Ink Cartridge Yellow Officejet Ink Cartridge
b. UPS Output Power Capacity
660 Watts / 1100 VA
Output Power Voltage
230V
Input Power Voltage
230V
Surge Energy Rating
180 Joules
Dataline Protection
RJ-11 Modem/Fax/DSL protection (two wire single line)
Back-Up Time Half Load
Typical: 17.5 minutes (330 Watts)
Back-Up Time Full Load
Typical: 6.3 minutes (660 Watts)
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Dimensions
(HxWxD): 222 x 132 x 356 mm
Weight
12.50 KG
Warranty
2 years repair or replace
Others
•
Contents may vary, Output Max Configurable Power: 660 Watts / 1100 VA, Output Connections: (1) IEC 320 C13 (Surge Protection), (3) IEC 320 C13 (Battery Backup), Input o Input Frequency: 47 - 63 Hz o Input Connections: IEC-320 C14
1 unit
o Input voltage range for main operations: 175 - 295V o Input voltage adjustable range for mains operation: 160 - 286V • Batteries & Runtime o Included Battery Modules: 1 o Typical recharge time: 24 hour(s) o Replacement battery cartridge: RBC33 o RBC™ Quantity: 1 o Runtime Chart: Back-UPS RS • Communications & Management o Control panel: LED Status display with On Line : On Battery o Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays • Surge Protection and Filtering o Filtering: Full time multi-pole noise filtering : 5% IEEE surge letthrough : zero clamping response time : meets UL 1449
5.
Plotter
Printing Technology
HP Vivera pigment inks, HP Three-Black ink set, HP Embedded Spectrophotometer
Max. Resolution
• •
Printing Speed
•
Best (Color and B&W) : 2400 x 1200 optimized dpi Normal (Color and B&W) : 600 x 600 dpi
Best : o 15 min/page on D/A1 or up to 17 ft2/h (color image on glossy paper) o 9.8 min/page on D/A1 or up to 31 ft2/h (color image on coated paper) • Normal o 7.9 min/page on D/A1 or up to 38 ft2/h (color image on glossy paper) o 4.2 min/page on D/A1 or up to 72 ft2/h (color image on coated paper)
Number of Ink Colours
Light cyan, light magenta, light gray, photo black, cyan, magenta, yellow, matte black
Ink Type
HP Vivera pigment inks
Ink Capacity
• •
Media
130 ml ink cartridges (69 ml introductory ink cartridges included in 24" printer box, not available as replacement cartridges) 130 ml Ink Cartridge Twin Packs also available All standard sizes larger than Letter/A4 up to 44 in/1117 mm wide
1 unit
Media Handling
Sheet feed, roll feed, automatic cutter (cuts all media except canvas)
Media Type
Photographic paper (satin, gloss, semi-gloss, matte), proofing paper (highgloss, semi-gloss, matte), fine art printing material (canvas, smooth, textured, watercolor), self-adhesive and vinyl (polypropylene, vinyl), sign and banner (display film, banner, scrim, polypropylene, Tyvek®, outdoor paper), backlit, bond and coated (bond, coated, heavyweight coated, super heavyweight coated)
Connectivity
1 Fast Ethernet (10/100Base-T) port; 1 Hi-Speed USB 2.0 certified port; 1 EIO Jetdirect accessory slot
Memory Standard
128 MB
Memory Max.
128 MB
O/S Compatibility
•
Language Supports
• •
Standard: HP PCL3GUI Optional: PS via optional software RIP, HP-GL2/RTL optional software solution
Power Consumption
• • • • •
Active : 200 watts Maximum : 200 watts Powersave : 27 watts Standby : 43 watts Power requirements : Input voltage auto-ranging 100 to 240 VAC (+/- 10%), 50/60Hz (+/- 3 Hz), 2 Amp max Power supply type : Built-in universal power supply
Windows : o Microsoft® Windows® Vista® (32 and 64-bit); Windows® Server 2008 (32 and 64-bit); Windows® XP Home and Professional (32 and 64-bit); Windows® Server 2003 (32/64 bit) • Mac : Mac OS X v 10.4; Mac OS X v 10.5
• Dimension
Printer with stand : 1770 x 661 x 1047 mm (69.7 x 26 x 41.2 in) (w x d x h)
Weight
Printer with stand : 86 kg (189 lb)
Package Content
Contents may vary
6.
Kamera a. Kamera DSLR (BODY ONLY) DSLR + Effective pixels 12.1 million Tele Converter + Lensa Image sensor CMOS sensor, 36.0 x 23.9 mm; total pixels: 12.87 million; Micro + Nikon FX format Lensa Wide Image size (pixels) FX format (36 x 24): 4,256 x 2,832 [L], 3,184 x 2,120 [M], Angel + 2,128 x 1,416 [S] Speedlight DX format (24 x 16): 2,784 x 1,848 [L], 2,080 x 1,384 [M], 1,392 x 920 [S] Sensitivity
ISO 200 to 6400 in steps of 1/3, 1/2, or 1 EV; can be set to approx. 0.3, 0.5, 0.7, or 1 (ISO 100 equivalent) EV below ISO 200, or to approx. 0.3, 0.5, 0.7, 1 (ISO 12800 equivalent), or 2 (ISO 25600 equivalent) EV over ISO 6400
Storage media
CompactFlash (Type I, compliant with UDMA) 8 GB
Monitor
3-in., approx. 920,000-dot (VGA), 170-degree wide-viewingangle, 100% frame coverage, low-temperature polysilicon TFT LCD with brightness adjustment
Exposure metering
3D Color Matrix Metering II, Center-Weighted and Spot Metering
Exposure modes
Programmed Auto (P) with flexible program, Shutter-Priority Auto (S), Aperture-Priority Auto (A), Manual (M)
Interface
Hi-Speed USB
1 unit
Power sources
One Rechargeable Li-ion Battery EN-EL3e, Multi-Power Battery Pack MB-D10 (optional) with one Rechargeable Li-ion Battery EN-EL4a/4/3e, or eight R6/AA-size alkaline (LR6), NiMH (HR6), lithium (FR6) batteries, or nickel-manganese (ZR6) batteries
Dimensions (W x H x D) Approx. 147 x 123 x 77 mm (5.8 x 4.8 x 3.0 in.) Weight
Approx. 995 g (2.19 lb.) without battery, memory card, body cap or LCD monitor cover
Bag
Bag Kamera
b. Tele Converter Specifications • Lens Elements 7, Lens Groups 5, Optical Conversion Factor 2.0x Effectively doubles the focal length of the attached lens. Light Loss 2 f-stops, Compatible Format(s) FX, DX, FX in DX Crop Mode 35mm Film, Autofocus Yes, AF-S (Silent Wave Motor) Yes • Dimensions, (Approx.) 2.6x1.8 in. (Diameter x Length), 66x46mm (Diameter x Length) o Weight (Approx.)11.06 oz. (330g) • Supplied Accessories o BF-3A front lens cap, LF-1 rear lens cap, Cl-0715 Lens Case c. Lensa MICRO 85MM F2.8D ED, Lens construction: 6 elements in 5 groups Picture angle: Diagonal: 28° 30', Vertical: 16°, Horizontal; 23° 50' Maximum reproduction ratio: 1:2 (at 0.39m) Distance scale: Graduated in meters and feet from 0.39m (1.3 ft) to infinity (OO) Distance information: Output into camera body Aperture scale: 1/2.8, 4, 5.6, 8, 11, 16, 22, 32 and 45 Aperture method: Preset aperture
1 unit
1 unit
Lens movement: shift and tilt movement at right angles (the two operations can be modified for a surcharge, to move in the same (parallel) direction) Maximum shift mount: ±12,4 mm, Maximum tilt amount: ±8.3mm, Image circle: 68mm diameter, Overall picture angle: 43° 40', Lens rotation: 90' right and left (click-stop in each step), Mount: Nikon bayonet mount Lens Hood: HB-22, Lens Case, Attachment size: 77nm (P=0.75mm) Dimensions: approx. 83.5mm (3.3 in.) dia. x 109.5mm (4.3 in.) extension from the camera's lens mounting flange; overall length is approx. 118mm (4.6 in.), Weight: approx. 775g (27.3 oz.), Usable Tele-Converter (s): TC-14Bs, AF-3, AF4
d. Speedlight SB-700 AF, Commander Function Yes, Remote Function, Yes Guide Number 28 m/92 ft. (at ISO 100, 35mm zoom head position, in FX format, standard illumination pattern, 20°C/68 °F) to 39 m/128 ft. (at ISO 200, 35mm zoom head position, in FX format, standard illumination pattern, 20°C/68°F) Electronic Construction Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry Flash Exposure Control Distance-priority manual flash i-TTL Balanced Fill-Flash with CLS compatible cameras Manual Flash (with Nikon Creative Lighting System digital and 35mm SLR cameras) Lens Coverage 14-120mm (DX-format) 24 to 120mm (FX-Format) Illumination pattern The light distribution angle is automatically adjusted to the camera's image area in both FX and DX formats Standard Even Center-weighted Other Available Functions Test Firing Monitor Pre-flashes AF-assist illuminator Modeling illuminator Bounce Function (Tilt) Flash head tilts down to -7° or up to 90° with clic k-stops at -7°, 0°, 45°, 60°, 75°, 90°. Bounce Function (Rotate)
1 unit
Flash head rotates horizontally 180° to the left an d right with click-stops at 0°, 30°, 60°, 75°, 90°, 120°, 150°, 180° Minimum Recycling Time 2.5 sec. (approx.) with AA-size Alkaline (1.5V) batteries 2.5 sec. (approx.) with Evolta (1.5V) batteries 2.5 sec. (approx.) with NiMH (2600 mAh) batteries 2.5 sec. (approx.) with NiMH (eneloop) batteries 3.5 sec. (approx.) with Lithium (1.5V) batteries Flash Duration 1/1042 sec. at M1/1 (full) output 1/1136 sec. at M1/2 output 1/2857 sec. at M1/4 output 1/5714 sec. at M1/8 output 1/10000 sec. at M1/16 output 1/18182 sec. at M1/32 output 1/25000 sec. at M1/64 output 1/40000 sec. at M1/128 output Power ON/OFF Rotate the power switch/wireless mode switch for multiple flash units to turn the SB-700 on or off Standby function can also be set Required Power Source Four 1.5 V alkaline AA-size batteries Four 1.5 V lithium AA-size batteries Four Rechargeable 1.2 V NiMH AA-size batteries Flash-ready Indicator Blinks: insufficient flash output for correct exposure (in i-TTL or distance-priority manual flash mode) Lights up: recycled and ready to fire. Ready Light Front Back Flash Compensation -3.0 EV to +3.0 EV in increments of 1/3 EV steps in i-TTL mode Custom Setting AF-Assist Illumination Color Filters Flash Compensation Steps in Manual Flash Mode FX/DX Format Selection LCD Panel Contrast Remote Flash Unit Settings Reset Custom Setting Sound Monitor Standby function Unit or Measuring Distance
Version of Firmware Minimum Number of Flashes / Recycling Time 160/2.5–30 sec. (1.5V AA Alkaline) 230/2.5–30 sec. (1.5V Evolta) 260/2.5–30 sec. (2600 mAh NiMH) 230/2.5–30 sec. (Ni-MH (eneloop)) 330/3.5–30 sec. (1.5V Lithium) Wireless Flash Modes Master Quick wireless Mode: A:B, Off Remote SU-4 Wireless Communication Channels Four: 1, 2, 3 and 4 Channels Wireless Groups Two: A, B Other Functions Firmware update, Thermal cut-out Dimensions 2.8 × 5.0 × 4.1 in. (71.0 × 126.0 × 104.5mm) (Approx.) Weight (Approx. without batteries) 12.7 oz. (360g) Bag / Case
e. LENS WIDE ANGEL AF-S DX 35mm f/1.8G, Filter Size52mm Lens Mount Lens CompatibilityAPS-C (DX) Lens TypeWide Angle Prime Image StabilizationNo Lens MotorYes Weight200g Minimum Focus Distance1' (0.30 m) F Stop Range1.8 Angle of View44° Groups / Elements6 / 8 Dimensions (W x H x D)52.5mm x 52.5mm Package ContentsLens Cap, Rear Cap, Lens Hood, Lens Case Warranty1-year Limited Warranty by Authorized Distributor 7.
Kamera Digital (Pocket)
Spesifikasi umum : 12.1 Megapixels, 14x Optical Zoom, 4x Digital Zoom, SD/SDHC/SDXC Slot Memory, 3.0" TFT LCD, Memory 4 GB, Anti Gores dan Casing (kantong kamera) Spesifikasi detail ; Model Type Compact Sensor Resolution12.1 Megapixel Sensor Size and Type1/2.3-inch CMOS Effective Pixels12.1 Megapixels Max. Image Resolution4:3 - 4000 x 3000 File FormatJPEG Lens Focal Length5.0 (W) - 70.0 (T) mm (35mm film equivalent: 28 - 392mm) Lens ApertureMaximum Aperture : f/3.1 (W) - f/5.9 (T) Optical Zoom14x Optical Zoom Digital Zoom4X Digital Zoom Auto Focus TypeTTL Normal Focus Range2.0 in (5cm) - infinity (W), 3.3 ft (1m) - infinity (T)? Macro Focus Range2.0 in - 1.6 ft (5-50cm) (W) Shutter Speed • 1-1/3200 sec.
1 unit
7 unit
•
15-1/3200 sec. (Total shutter speed range) ISO SensitivityAuto, 100-3200 Exposure Compensation • +/-2 stops in 1/3-stop increments White BalanceAuto, Day Light, Cloudy, Tungsten, Fluorescent, Fluorescent H, Underwater, Custom ViewfinderNot Available Display Size3.0 inch Display Type and ResolutionTFT LCD with wide viewing angle Self-timer2 or 10 second Built-in FlashYes Flash ModesAuto, Manual (3 levels), Red-eye Reduction, Auto Red-eye Correction, Flash On, Flash Off; FE Lock, Safety FE, Slow Synchro Flash Range (Wide) • 2.5 - 11.5 ft. • 75cm - 3.5m Flash Range (Tele) • 3.3 - 6.6 ft • 1.0 - 2.0m Storage Types SD/SDHC/SDXC memory card slot Battery • Rechargeable Li-ion Battery NB-5L Dimensions (WHD)4.16 x 2.42 x 1.31 in. / 105.7 x 61.6 x 33.2mm Weight • 7.87 oz. / 223g (including the battery and memory card) • 6.88 oz. / 195 g (camera body only) Packaged Contents Warranty1-year Limited Warranty by Authorized Distributor 8.
9.
Kamera Video
Spesifikasi Umum Camcorder Professional 132,000Pixels, DVCAM, DV SP 576/50i (PAL), 10x (Optical), Carl Zeiss VarioSonnar Zoom Lens, 2.7 inch LCD monitor
1 unit
Server Data Base + 3 Hard drive + 1 Controler +1 Monitor + OS Web
a. SERVER Xeon E5502, 12 GB UDIMM DDR3 1333, 160GB HDD SATA 3x, DVD-ROM, VGA ATI 16MB, GbE NIC, Tower Case
1 unit
Platform
Dual CPU Tower Server
Processor Type
Multi-core Intel Xeon Processor (Nehalem-based)
#1 Processor Onboard
Intel® Xeon® Processor E5502 (1.86 GHz, FSB 4.8 GT/s, Cache 4 MB)
#2 Processor Onboard
Optional
Server original + 1 UPS
Chipset
Intel® 5500 Server Chipset
Memory
12 GB ECC DDR3-10600 UDIMM 1333 MHz
Video Type
Integrated ATI ES1000 16 MB
#1 Controller
•
HP Smart Array B110i Controller SATA RAID Controller (RAID 0/1/1+0)
#2 Controller
Optional
#1 Hard Drive
160 GB Serial ATA-II/300, 7200 RPM, Cache 8MB
#2 Hard Drive
160 GB Serial ATA-II/300, 7200 RPM, Cache 8MB
#3 Hard Drive
160 GB Serial ATA-II/300, 7200 RPM, Cache 8MB
#1 Optical Drive
16X DVD-ROM
#2 Optical Drive
Optional
Standard Bays
Four HP proprietary fixed drive bays
Interface Provided
6x USB 2.0, Serial, VGA, LAN, PS2
Slot Provided
PCI-e x16, 2x PCI-e x8, PCI
Networking
•
Integrated 10/100/1000 Ethernet HP NC107i PCI Express Gigabit Server Adapter
System Fans / Coolers
Manageable Cooling Fans
Chassis Form Factor
Tower Chassis
Power Supply Type
HP fixed 460w
Keyboard Type
HP Keyboard
Input Device Type
HP Mouse
System Management
• o
HP LO100i Advanced HP LO100i Lights-Out 100 Baseboard Management
O/S Provided
Pre-sales Request Available
Validated System
Windows, RHEL, SLES and XenServer
Dimensions (W x H x D)
200 x 427 x 613 mm
Weight
30 kg (All hard drives, power supplies and processors installed)
Standard Warranty
3-year Limited Warranty by Authorized Distributor
b. Monitor 2301 23", 1920x1080, 0.265mm, 3 ms, 1000:1, 250 cd/m², WideScreen Detail Specifications Display Type
LED Widescreen
Screen Size
23"
Max. Resolution
1920 x 1080
Dot Pitch
0.265 mm
Contrast Ratio
•
1000:1 8000000:1 dynamic
Respond Time
3 ms
Brightness
250 cd/m²
Aspect Ratio
16:9
Display Technology
LED
Horizontal Freq.
24 to 94 KHz
Vertical Freq.
50 to 76 Hz
Input Connector
VGA, DVI-D, HDMI with HDCP
Horizontal View Angle
170°
Vertical View Angle
160°
Power Consumption
• • •
Power consumption: 30W maximum 28W typical Standby mode: <0.5W
Package Contents
Contents may vary
Dimension
55.21 x 13.87 x 39.99 cm (WxDxH)
Weight
3.5 kg
Warranty
1-year Limited Warranty by Authorized Distributor
1 unit
c. Operation System Server MICROSOFT Windows Web Server 2008 R2
1 bh
Detail Specifications License Type
Full Package Product
Media Type
DVD
Compatibility
PC with Windows
Pricing Scheme
Retail
Min. License Quantity
1 PC user(s)
Product type
Base Product
Min. Processor Speed
1 GHz (x86 processor) or 1.4 GHz (x64 processor)
Min. Harddisk Space
10 GB
Min. Memory Size
512 MB RAM
Min. Graphic Size
Super VGA (800 × 600) or higher resolution monitor
• •
Peripheral Requirements
CD-ROM drive Keyboard and Microsoft Mouse or compatible pointing device
d. UPS Output Power Capacity
660 Watts / 1100 VA
Output Power Voltage
230V
Input Power Voltage
230V
Surge Energy Rating
180 Joules
Dataline Protection
RJ-11 Modem/Fax/DSL protection (two wire single line)
Back-Up Time Half Load
Typical: 17.5 minutes (330 Watts)
Back-Up Time Full Load Typical: 6.3 minutes (660 Watts) Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte :
1 unit
leakproof Dimensions
(HxWxD): 222 x 132 x 356 mm
Weight
12.50 KG
Warranty
2 years repair or replace • •
Others o o
o o o o o o o o o o o
o
Contents may vary Output Max Configurable Power: 660 Watts / 1100 VA Output Connections: (1) IEC 320 C13 (Surge Protection), (3) IEC 320 C13 (Battery Backup) • Input Input Frequency: 47 - 63 Hz Input Connections: IEC-320 C14 Input voltage range for main operations: 175 - 295V Input voltage adjustable range for mains operation: 160 - 286V • Batteries & Runtime Included Battery Modules: 1 Typical recharge time: 24 hour(s) Replacement battery cartridge: RBC33 RBC™ Quantity: 1 Runtime Chart: Back-UPS RS • Communications & Management Control panel: LED Status display with On Line : On Battery Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays • Surge Protection and Filtering Filtering: Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 • Cable power not included
BAB XIII. BENTUK DOKUMEN LAIN A. Bentuk surat penunjukan penyedia/jasa (SPPBJ) .................................... B. Bentuk Surat Pesanan .............................................................................. C. Bentuk Jaminan sanggahan banding dari Bank ....................................... D. Bentuk Jaminan Pelaksanaan dari Bank ..................................................
tetap tetap tetap tetap
Penjelasan tambahan : Surat dukungan dari Bank dalam SDP tidak dipersyaratkan namun pada Pengumuman lelang Panitia mensyaratkan untuk itu lampiran dukungan bank baik yang bersifat umum maupun menyebutkan jenis pengadaannya, hal ini akan menjadi penilaian tersendiri panitia. Berita Acara Penjelasan Pekerjaan ini dibuat dalam rangkap secukupnya untuk dipergunakan sebagai pelengkap Instruksi dan syarat-syarat Pelaksanaan Pekerjaan yang telah ada dan mengikat sepenuhnya dalam pelaksanaan.
Yogyakarta, 28 Maret 2012 Panitia Pengadaan Barang/Jasa : No.
Nama
Jabatan
1.
Hardiyono, S.Hut.T
Ketua
2.
Edy Mintaryanto, BA
Sekretaris
3.
Ady Sularso, SH, MP
Anggota
4.
Bangun Baramantya, S.Hut
Anggota
5.
Asep Nia Kurnia
Anggota
Tanda Tangan
