22FL532/10 22FL552/10 26FL532/10 26FL552/10 32FL532/10 32FL552/10 Obsah
INFORMACE O PěÍSTROJI
INFORMACE O PěÍSTROJI ........................1 Informace o ochranných známkách ..........1 Opravy.......................................................1 ýištČní krytu ..............................................1 ýištČní panelu ...........................................1 Dálkové ovládání / TV ...............................2 PRVNÍ NASTAVENÍ .....................................4 FUNKCE.......................................................5 Sledování televizních programĤ ................5 Oblíbené....................................................5 EPG (elektronický programový prĤvodce) ..5 Volba zvuku...............................................6 ýasovaþ vypnutí........................................6 Nastavení titulkĤ........................................6 Nastavení teletextu....................................6 PĜepínání vstupního režimu ......................6 Nahrávání..................................................7 PĜehrávání fotografií..................................8 PC formát ..................................................9 DALŠÍ NASTAVENÍ ...................................10 Nastavení kanálu.....................................10 Nastavení PC ..........................................12 Nastavení obrazu ....................................13 Nastavení zvuku......................................14 Nastavení þasu........................................15 Nastavení zámku.....................................16 Nastavení režimu Hotel ...........................17 Úprava nastavení ....................................18 ODSTRAĕOVÁNÍ ZÁVAD .........................21 TECHNICKÉ PARAMETRY .......................23
Informace o ochranných známkách
1 CS
• Vyrobeno na základČ licence poskytnuté spoleþností Dolby Laboratories. Dolby a symbol dvojitého D jsou ochranné známky spoleþnosti Dolby Laboratories. • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • DVB je registrovaná ochranná známka DVB Project. • Logo „HD TV“ je obchodní známka DIGITALEUROPE.
Opravy • Pokud pĜístroj pĜestane fungovat, nesnažte se problém vyĜešit sami. UvnitĜ se nenacházejí žádné souþásti, které by mohl opravit sám uživatel. VezmČte pĜístroj do servisního centra.
ýištČní krytu • OtĜete þelní panel a ostatní vnČjší povrchy pĜístroje mČkkým hadĜíkem. • Nikdy nepoužívejte rozpouštČdlo nebo líh. NestĜíkejte v blízkosti pĜístroje insekticidní prostĜedky. Tyto chemikálie by mohly zpĤsobit poškození a vyblednutí postĜíkaných ploch.
ýištČní panelu • PotĜebuje-li LCD panel oþistit, otĜete jej bavlnČnou nebo mČkkou utČrkou. PĜed þištČním panelu odpojte napájecí šĖĤru.
Dálkové ovládání / TV
1.
13 14 15
1 2
2. 3. 4.
3 16 4
17
5 6
5. 6. 7. 8. 9.
(Zapnutí) Zapnutí pĜístroje a pĜechod do pohotovostního režimu. SLEEP (spánek) (str. 6) ýíselná tlaþítka Volba požadovaného kanálu v TV režimu a zadání PIN kódu do pole pro zadávání hesla. EXIT (odchod) (str. 5) Návrat do pĜedchozího zobrazení. Ÿ / ź / Ż / Ź (Kurzor) (str. 5) OK MENU (str. 10) AUDIO (str. 6) / (str. 5) Pro nastavení hlasitosti.
7 8
18
• VOL. Ż / Ź (ýelní panel) má stejné funkce jako Ż / Ź (kurzor) v menu.
9
19
10. (Ztlumit) (str. 5) 11. RED / GREEN / YELLOW / BLUE Používá se pro „EPG (elektronický programový prĤvodce)“ (str. 5) / „[Editace programu]“ (str. 11). 12. DISPLAY Zobrazí þíslo kanálu nebo vstupní zdroj. 13. SOURCE (str. 6)
10 11
20 21 22
12
23
• SOURCE (Zdroj) (þelní panel) funguje stejnČ jako OK pro urþení nabídky nastavení.
14. 15. 16. 17. 18. 19.
PICTURE MODE (str. 13) SOUND MODE (str. 14) FAV / FAV (str. 5) FAV (str. 5) EPG „EPG (elektronický programový prĤvodce)“ (str. 5)
(str. 5) Pro volbu kanálu.
• PROG. Ÿ / ź (ýelní panel) má stejné funkce jako Ÿ / ź (kurzor) v menu.
20.
(PĜehrát / pozastavit) / (PĜeskoþit dozadu) / (PĜeskoþit dopĜedu) / (Zastavit) / (PĜevinout) / (Rychlé pĜevíjení vpĜed) 21. REC (Nahrávat) 22. (Titulky) (str. 6) 23. (RozšíĜit) / (pod strana) / (podržet) / (text) / (odhalit) / (rejstĜík) (str. 6)
9
19
7
13
1
2 CS
24. CI slot 25. USB konektor (str. 7, 8) • Datový vstup pouze z USB flash pamČti.
24
25 26 27 28
• Aktualizaci softwaru ve vČtšinČ pĜípadĤ provádí kvalifikovaný servis, pĜípadnČ za nČkterých okolností mĤže být o provedení aktualizace softwaru požádán samotný uživatel.
26. 27. 28. 29. 30. 31. 32. 33. 34. 35.
31 32
29
33
30
34
35 / 36
3 CS
• K USB konektoru nepĜipojujte žádná zaĜízení, jako je digitální fotoaparát, klávesnice, myš apod. (protože nebudou fungovat.)
36.
Koaxiální výstupní konektor digitálního zvuku Vstupní konektor pro PC (VGA) Vstupní konektor zvuku pro pĜipojení PC Vstupní konektor (aerial) Vstupní konektory komponentního videa, kompozitního videa a Audio (L/R) ZdíĜka pro síĢový kabel Konektor SCART Vstupní konektor HDMI (HDMI 1 / HDMI 2) Konektor audio výstupu sluchátek Kontrolka napájení / pohotovostní režim PĜi pĜechodu pĜístroje do pohotovostního režimu se rozsvítí þervenČ. Zhasne, pokud zapnete napájení. Senzor dálkového ovládání PĜijímá infraþervené paprsky vysílané z dálkového ovladaþe.
PRVNÍ NASTAVENÍ
< Pro DVB-C vyhledávání >
Tato þást vás provede poþáteþním nastavením pĜístroje zahrnujícím volbu jazyka vaší nabídky na obrazovce a automatické vyhledávání, které automaticky vyhledá a uloží do pamti nalezené kanály. 1 Po provedení všech potĜebných zapojení zapnČte pĜístroj pomocí hlavního vypínaþe a stisknČte . First Time Installation Home Mode OSD Language
English
Auto ladění
Typ ladění
2
Stisknutím Ż / Ź zvolte místo použití.
• Když zvolíte [Domácí režim], tento pĜístroj se nastaví tak, aby maximalizoval energetickou úþinnost domácího nastavení. Toho lze dosáhnout úpravou kvality a zvuku podle vaší volby. • Pokud zvolíte na tomto pĜístroji [Režim maloobchodu], bude použito pĜeddefinované nastavení pro displeje v obchodech. • Pokud zvolíte [Režim maloobchodu], zobrazí se potvrzovací zpráva.
3
StisknČte Ÿ / ź pro volbu [OSD jazyk], potom zvolte požadovaný jazyk pomocí Ż / Ź.
4
Stisknutím Ÿ / ź zvolte [Auto ladČní], potom stisknČte OK.
5
StisknČte Ÿ / ź pro volbu [ZemČ], potom zvolte požadovanou zemi pomocí Ż / Ź.
6
Použijte Ÿ / ź pro volbu [Typ ladČní] a potom zvolte [DTV], [ATV] nebo oba kanály pomocí Ż / Ź.
ATV + DTV
Digital Type
DVB-C
Scan Type
Standard
Network ID
Auto
Frekvence
Auto
Symbol Rate OK
Auto Menu
7
Použijte Ÿ / ź pro volbu [Digital Type] a potom zvolte [DVB-C] pomocí Ż / Ź.
8
Použijte Ÿ / ź pro volbu [Scan Type] a potom zvolte [Standard] nebo [Pokroþilé] pomocí Ż / Ź.
9
Použijte Ÿ / ź pro volbu požadované položky, potom upravte nastavení pomocí Ż / Ź.
10
StisknČte OK pro zahájení vyhledávání.
Auto Tuning OK
Česká republika
Země
• Objeví se nabídka pro potvrzení vyhledání kanálĤ. • V pĜípadČ, kdy v režimu vyhledávání [Standard] (BČžný) nejsou nalezeny všechny dostupné kabelové kanály, mohou být tyto programy vyhledány zvolením režimu [Pokroþilé]. PĜipomínáme, že režim vyhledávání [Pokroþilé] mĤže zabrat další þas. • V závislosti na specifikaci poskytovatele kabelové televize nemĤže být zaruþeno správné pĜedplatné kabelových signálĤ. • Po dokonþení vyhledávání se zobrazí nejnižší digitální nebo analogový kanál uložený v pamČti. • Pokud bČhem vyhledávání kanálĤ stisknete MENU, vyhledávání se zastaví. Pokud stisknete MENU ještČ jednou, opustíte první nastavení.
< Pro DVB-T vyhledávání > Auto ladění Česká republika
Země Typ ladění
DVB-T
Scan Type
Standard
Network ID
Auto
Frekvence
Auto
Symbol Rate OK
7
ATV + DTV
Digital Type
Auto Menu
StisknČte OK pro zahájení vyhledávání.
4 CS
FUNKCE
EPG (elektronický programový prĤvodce)
NapĜed si pĜeþtČte toto
Obsluha digitálního televizoru MĤžete snadno vyhledat kanál nebo zobrazit podrobné informace o kanálu. EPG (elektronický programový prĤvodce) vám poskytuje þasové informace o TV programech. 1 StisknČte EPG a použijte Ÿ / ź pro volbu kanálu.
Tyto operace lze provádČt pomocí dálkového ovládání. NČkteré z nich jsou dostupné rovnČž pomocí ovládání hlavního pĜístroje.
Sledování televizních programĤ Volba kanálu
PROGR.PRŮVODCE Led
Žádné informace
OpakovanČ stisknČte pro volbu požadovaného kanálu nebo použijte þíselná tlaþítka pro zadání þísla kanálu, potom stisknČte OK pro rychlejší pĜístup. (napĜíklad) Pokud chcete zvolit kanál 24 bez stisknutí OK, stisknČte nejprve 2, pak stisknČte 4 do 3 sekund.
Led
Nahrát
Displej
Plán
Připomenout
Přes. zobr.
Další den
Předchozí den
OK
Pro nastavení hlasitosti StisknČte Stisknutím
/ pro nastavení hlasitosti. zapnete nebo ihned vypnete zvuk.
• PĤvodní hlasitost obnovíte opČtovným stisknutím / .
nebo
Oblíbené MĤžete snadno najít oblíbený kanál. • Oblíbený kanál mĤžete nastavit na „[Editace programu]“ (str. 11).
1
PĜi sledování programu stisknČte FAV pro zobrazení seznamu oblíbených kanálĤ.
2
Použijte Ÿ / ź pro volbu požadovaného kanálu, poté stisknČte OK.
Seznam oblíbených DTV DTV DTV DTV
Vymazat OK
Přesunout Oblíbené
Přeskočit Menu
• Použijte FAV / pro volbu oblíbeného kanálu pĜi sledování programu. • Použijte Ż / Ź pro posun na pĜedchozí nebo následující stránku.
3
Stisknutím EXIT nabídku opustíte.
5 CS
[Nahrát] (RED) : StisknČte pro vyvolání seznamu záznamĤ. MĤžete si zvolit þas události, kterou chcete nahrát. [Displej] (GREEN) : StisknČte pro zobrazení podrobných informací o programu. [Plán] (YELLOW) : StisknČte pro prohlížení nastavení, které jste provedli dĜíve. [PĜipomenout] (BLUE) : StisknČte pro nastavení þasu, kdy chcete pĜipomenout program, který chcete vidČt. • Když je þas události v rozporu, objeví se varovná zpráva.
2
Stisknutím EPG nabídku opustíte.
Volba zvuku
Nastavení titulkĤ
Obsluha digitálního televizoru Pro zobrazení aktuálnČ zvoleného jazyka zvuku spolu s þíslem znázorĖujícím poþet dostupných jazykĤ stisknČte AUDIO. Opakovaným stisknutím budete procházet dostupnými jazyky.
Pro TV programy mĤžete zmČnit používané nastavení titulkĤ. 1
OpakovanČ stisknČte jazyka titulkĤ.
(Titulky) pro zmČnu
Nastavení teletextu
: Zvuk Dolby Digital
Pro TV programy mĤžete zmČnit používané nastavení teletextu.
: Zvuk Dolby Digital Plus : Zvuk HE-AAC bez ikony : Zvuk MPEG
1
Stisknutím tlaþítka teletextu.
2
OpakovanČ stisknČte (Text) pro zobrazení teletextu v prostupném režimu.
• Stisknutím tlaþítka
(Text) zapnete dekodér
zvČtšíte písmo.
Obsluha analogového televizoru Pro zobrazení aktuálnČ zvoleného režimu zvuku stisknČte AUDIO. Opakovaným stisknutím budete procházet dostupnými režimy zvuku. (NapĜ.:)
• Pro volbu podstránek teletextu stisknČte
NICAM STEREO
• Stisknutím
pozastavíte aktuální stranu.
• Stisknutím
se vrátíte na úvodní stranu.
NICAM DUAL I
Mono NICAM DUAL II
Mono
• Stisknutím
3 NICAM MONO Stereo
Mono
DUAL I
DUAL II
Mono
Mono
ýasovaþ vypnutí ýasovaþ vypnutí slouží k nastavení þasu, po kterém pĜístroj pĜejde do pohotovostního režimu. 1 Opakovaným stisknutím SLEEP zmČĖte þas pro automatické vypnutí.
.
• Pomocí tlaþítek RED (ýERVENÁ) / GREEN (ZELENÁ) / YELLOW (ŽLUTÁ) / BLUE (MODRÁ) pĜímo zvolíte þísla stran teletextu zobrazená na spodním okraji obrazovky televizoru. vyvoláte skryté informace.
Stisknutím EXIT vypnete dekodér teletextu.
PĜepínání vstupního režimu PĜepínáním vstupního režimu mĤžete volit mezi televizním režimem nebo externími vstupy. 1
StisknČte SOURCE
2
Stisknutím Ÿ / ź zvolte požadovaný režim vstupu, poté stisknČte OK.
.
Vstupní zdroj ATV DTV Média
• PĜi každém stisknutí tlaþítka SLEEP se þas navýší v intervalu od 10 minut až do 240 minut. • StisknČte tlaþítko SLEEP opakovanČ, dokud se nezobrazí [Vypnuto] oznaþující zrušení þasovaþe vypnutí. • Pokud pĜístroj pĜejde do pohotovostního režimu, þasovaþ vypnutí se zruší.
AV PC Component SCART HDMI1 HDMI2
OK
• [Component] se zobrazí, pokud k tomuto pĜístroji pĜipojíte komponentní video kabely.
6 CS
Nahrávání
PĜehrávání
Tento pĜístroj mĤže nahrávat televizní program. Pro uložení dat použijte USB flash pamČĢ.
2
StisknČte nahrávek.
DĜíve než zaþnete
3
Použijte Ÿ / ź pro volbu požadovaného souboru, poté stisknČte OK pro zahájení pĜehrávání.
PĜipojte USB flash pamČĢ do USB konektoru tohoto pĜístroje (jak je znázornČno níže) a zvolte [DTV] na [Vstupní zdroj]. Viz kapitola „PĜepínání vstupního režimu“ (str. 6).
(index) pro vyvolání seznamu
Seznam nahraných
Program
Vymazat
• USB flash pamČĢ není souþástí pĜíslušenství tohoto pĜístroje. • Tento pĜístroj rozeznává pouze USB flash pamČĢ. Mezi USB flash pamČtí a tímto pĜístrojem nepoužívejte USB rozboþovaþ ani prodlužovací kabel. Vždy pĜipojujte USB flash pamČĢ k tomuto pĜístroji pĜímo. • Nezaruþujeme, že tento pĜístroj bude podporovat všechny typy USB flash pamČtí.
1
StisknČte SOURCE pro zobrazení vstupního režimu a použijte Ÿ / ź pro volbu [DTV], poté stisknČte OK.
Nahrávání 2
Vyberte kanál, který chcete, potom stisknČte REC pro zahájení nahrávání aktuálního programu.
OK
Přeskočit Index
Operace pĜi pĜehrávání Stisknutím OK zobrazte nabídku. : StisknČte tato tlaþítka pro spuštČní nebo zastavení pĜehrávání. / : StisknČte pro rychlý posun pĜehrávání vpĜed nebo vzad. Každý stisk / rychle posune pĜehrávání vpĜednebo vzad rychleji až do pČti. / : StisknČte pro pĜechod na pĜedchozí nebo další soubor. : Stisknutím pĜehrávání zastavíte. EXIT: StisknČte pro skrytí nabídky, když se zobrazí. 4
Přehrát
3
Stisknutím
FB
FF
Předch.
Další
Pozastavit
Zastavit
nahrávání zastavíte.
• Když zastavíte nahrávání, vrátí se k bČžnému televiznímu vysílání. • Když je úložný prostor na disku malý, objeví se varovná zpráva. Potom se nahrávání zastaví automaticky a vrátí se k bČžnému televiznímu vysílání.
7 CS
StisknČte SOURCE a zvolte požadovaný vstupní režim pro opuštČní tohoto režimu.
PĜehrávání fotografií
4
Tento pĜístroj mĤže pĜehrávat JPEG soubory. Použijte USB flash pamČĢ obsahující soubory tohoto typu.
DĜíve než zaþnete PĜipojte USB flash pamČĢ do USB konektoru tohoto pĜístroje (jak je znázornČno níže) a zvolte [Média] na [Vstupní zdroj]. Viz kapitola „PĜepínání vstupního režimu“ (str. 6).
StisknČte OK pro zobrazení nabídky v prĤbČhu prezentace.
• Použijte Ż / Ź pro volbu [PĜiblížit] nebo [Oddálit], poté stisknČte OK. Faktor zoomu: 1x, 2x a 4x • Použijte Ż / Ź pro volbu [Sez.pĜe.] a stisknČte OK pro zobrazení seznamu. • Použijte Ż / Ź pro volbu [Info.] a stisknČte OK pro zobrazení informací. • Použijte Ż / Ź pro volbu [PĜes. zobr.] a stisknČte OK pro pĜesun obrazu, pokud je obraz dostateþnČ velký, a byl by lepší než obrazovka.
Operace pĜi prezentaci
• USB flash pamČĢ není souþástí pĜíslušenství tohoto pĜístroje. • Tento pĜístroj rozeznává pouze USB flash pamČĢ. Mezi USB flash pamČtí a tímto pĜístrojem nepoužívejte USB rozboþovaþ ani prodlužovací kabel. Vždy pĜipojujte USB flash pamČĢ k tomuto pĜístroji pĜímo. • Nezaruþujeme, že tento pĜístroj bude podporovat všechny typy USB flash pamČtí.
1
StisknČte SOURCE pro zobrazení vstupního režimu a použijte Ÿ / ź pro volbu [Média], poté stisknČte OK.
2
StisknČte OK pro vstup do [FOTO] a zvolte [C], poté stisknČte OK pro vstup.
: StisknČte tato tlaþítka pro spuštČní nebo zastavení prezentace. / : StisknČte pro pĜechod na pĜedchozí nebo další soubor. : Stisknutím zastavíte prezentaci. [Opakovat] (YELLOW) : StisknČte pro volbu režimu opakování; [Opak.Žad], [Opakovat 1] nebo [Opak.Vše] v daném poĜadí. [Otoþit] (Ź) : Každé stisknutí Ź otoþí obrázek o 90 stupĖĤ po smČru hodinových ruþiþek. EXIT: StisknČte toto tlaþítko pro návrat na pĜedchozí obrazovku.
FOTO
5
StisknČte SOURCE a zvolte požadovaný vstupní režim pro opuštČní tohoto režimu.
Návrat
3
Stisknutím Ÿ / ź / Ż / Ź zvolte požadovaný soubor a poté stisknČte OK. FOTO
Návrat
Vymazat
Ukončit
8 CS
• Spoleþnost Funai není zodpovČdná za to, pokud vaše USB flash pamČĢ není podporována, stejnČ tak nenese žádnou zodpovČdnost za poškození nebo ztrátu vašich uložených dat. • USB flash pamČĢ vyžadující svĤj vlastní ovladaþ nebo zaĜízení se speciálním systémem, jako je rozeznávání otiskĤ prstĤ, nejsou podporovány. • UjistČte se, že máte pĤvodní soubory zazálohované na svém zaĜízení, dĜíve než je pĜehrajete na tomto pĜístroji. Neneseme žádnou odpovČdnost za poškození nebo ztrátu vašich dat.
PC formát Lze zobrazovat následující signály. Formát
VGA
Rozlišení
Obnovovací frekvence
720 x 400
70Hz 60Hz
640 x 480
75Hz
• Abyste zabránili poškození USB flash pamČti a pĜístroje, vždy pĜed vyjmutím USB flash pamČti vypnČte pĜístroj. • Tento pĜístroj nepodporuje použití USB flash pamČti, která vyžaduje externí napájení (500 mA nebo více). • Tento pĜístroj rozezná až 60.000 souborĤ uložených na USB flash pamČti.
72Hz 60Hz
SVGA
800 x 600
72Hz 75Hz 60Hz
XGA
1.024 x 768
70Hz
• Tento pĜístroj nepodporuje MTP(Media Transfer Protocol) nebo soubory jiné než systémy souborĤ FAT, FAT32 a NTFS. Pokud není soubor podporován, objeví se chybové hlášení.
SXGA
1.280 x 768
60Hz
WXGA
1.360 x 768
60Hz
• Pokud pĜístroj nerozezná USB flash pamČĢ, pokuste se ji pĜipojit znovu.
• PĜipojení PC pĜes HDMI kabel není zaruþeno.
• Tento pĜístroj nemusí rozeznat soubor, pokud je jeho název pĜíliš dlouhý. Rozeznají se pouze anglické znaky.
• Tento pĜístroj nemĤže pĜehrávat soubor, který svými vlastnostmi pĜesahuje restrikce souboru.
PĜedpokládá se, že soubory k pĜehrání na tomto pĜístroji jsou zaznamenány s následujícími specifikacemi: JPEG : Baseline
8.192 x 8.192
Progresivní
1.024 x 768
9 CS
75Hz
• Jiné formáty nebo nestandardní signály nebudou správnČ zobrazeny. • Použijte prosím VGA kabel, který má feritové jádro.
DALŠÍ NASTAVENÍ
< Pro DVB-C vyhledávání > Auto ladění
NapĜed si pĜeþtČte toto
Typ ladění
PĜed provedením jakéhokoliv nastavení stisknČte MENU pro zobrazení nabídky. Stisknutím tlaþítka MENU opustíte nabídku. NČkterá nastavení vyžadují zadání PIN kódu, viz „Nastavení zámku“ (str. 16).
Nastavení kanálu MĤžete upravit nastavení kanálĤ. 1 Použijte Ż / Ź pro volbu [KANÁL].
Analogové manuální ladění Digitální manuální ladění Editace programu Informace o signálu
ATV + DTV
Digital Type
DVB-C
Scan Type
Standard
Network ID
Auto
Frekvence
Auto
Symbol Rate OK
Auto Menu
6
Použijte Ÿ / ź pro volbu [Digital Type] a potom zvolte [DVB-C] pomocí Ż / Ź.
7
Použijte Ÿ / ź pro volbu [Scan Type] a potom zvolte [Standard] nebo [Pokroþilé] pomocí Ż / Ź.
8
Použijte Ÿ / ź pro volbu požadované položky, potom upravte nastavení pomocí Ż / Ź.
9
StisknČte OK pro zahájení vyhledávání.
Auto ladění
KANÁL
Česká republika
Země
CI informace
• Objeví se nabídka pro potvrzení vyhledání kanálĤ.
Přesunout
Návrat
Volba
Ukončit
[Auto ladČní] Ve vaší oblasti mĤžete automaticky vyhledávat DTV a ATV kanály. 2
Stisknutím Ÿ / ź zvolte [Auto ladČní], potom stisknČte OK.
3
Použijte þíselná tlaþítka pro zadání 4-místného PIN kódu, který jste nastavili.
4
StisknČte Ÿ / ź pro volbu [ZemČ], potom zvolte požadovanou zemi pomocí Ż / Ź.
5
Použijte Ÿ / ź pro volbu [Typ ladČní] a potom zvolte [DTV], [ATV] nebo oba kanály pomocí Ż / Ź.
• V pĜípadČ, kdy v režimu vyhledávání [Standard] (BČžný) nejsou nalezeny všechny dostupné kabelové kanály, mohou být tyto programy vyhledány zvolením režimu [Pokroþilé]. PĜipomínáme, že režim vyhledávání [Pokroþilé] mĤže zabrat další þas. • V závislosti na specifikaci poskytovatele kabelové televize nemĤže být zaruþeno správné pĜedplatné kabelových signálĤ. • Po dokonþení vyhledávání se zobrazí nejnižší digitální nebo analogový kanál uložený v pamČti. • Stisknete-li bČhem vyhledávání MENU, tato operace se zastaví a na obrazovce televizoru se objeví kanál uložený pod nejnižším þíslem.
< Pro DVB-T vyhledávání > Auto ladění Česká republika
Země Typ ladění
DVB-T
Scan Type
Standard
Network ID
Auto
Frekvence
Auto
Symbol Rate OK
6
ATV + DTV
Digital Type
Auto Menu
StisknČte OK pro zahájení vyhledávání.
10 CS
[Analogové manuální ladČní]
[Editace programu]
Obsluha analogového televizoru Ve vaší oblasti mĤžete vyhledat ATV kanály ruþnČ.
Obsluha digitálního televizoru MĤžete zmČnit programové nastavení.
2
Stisknutím Ÿ / ź zvolte [Analogové manuální ladČní], potom stisknČte OK.
3
Použijte þíselná tlaþítka pro zadání 4-místného PIN kódu, který jste nastavili.
4
Použijte Ÿ / ź pro volbu [Aktuální kanál], potom použijte Ż / Ź pro volbu požadovaného kanálu.
5
Použijte Ÿ / ź pro volbu [Systém zvuku], potom použijte Ż / Ź pro volbu požadovaného systému.
6
Použijte Ÿ / ź pro volbu [Jemné ladení], potom použijte Ż / Ź pro upravení nastavení.
7
Použijte Ÿ / ź pro volbu [AFC], potom použijte Ż / Ź pro volbu [Zapnuto] nebo [Vypnuto].
• Pokud jste nastavili [Zapnuto], tento pĜístroj automaticky upraví naladČní na nejbližší kanál.
8
Stisknutím Ÿ / ź zvolte [Vyhledat], potom stisknČte OK pro zahájení vyhledávání.
[Digitální manuální ladČní] Obsluha digitálního televizoru Ve vaší oblasti mĤžete vyhledat DTV kanály ruþnČ. 2
Stisknutím Ÿ / ź zvolte [Digitální manuální ladČní], potom stisknČte OK.
3
Použijte þíselná tlaþítka pro zadání 4-místného PIN kódu, který jste nastavili.
4
Použijte Ż / Ź pro volbu požadovaného kanálu, poté stisknČte OK pro zahájení vyhledávání.
11 CS
• Seznam kanálĤ mĤžete upravovat podle „Oblíbené“ (str. 5).
2
Použijte Ÿ / ź pro volbu [Editace programu], potom stisknČte OK pro vstup do úpravy seznamu programĤ.
Vymazání kanálĤ : [Vymazat] 3
Použijte Ÿ / ź pro volbu kanálu, který chcete, potom stisknČte RED pro vymazání aktuálního kanálu.
Nastavení nezobrazených kanálĤ : [PĜeskoþit] 3
Použijte Ÿ / ź pro volbu kanálu, který chcete, potom stisknČte BLUE pro nastavení aktuálního kanálu jako nezobrazovaného kanálu.
Nastavení oblíbených kanálĤ : [Oblíbené] Použití funkce Oblíbené, viz „Oblíbené“ (str. 5). 3
Použijte Ÿ / ź pro volbu kanálu, který chcete, potom stisknČte FAV pro nastavení aktuálního kanálu jako oblíbeného.
PĜepínání þísla kanálu : [PĜesunout] MĤžete pĜepnout aktuální program na jiné þíslo kanálu. 3
Použijte Ÿ / ź pro volbu kanálu, který chcete, potom stisknČte YELLOW a použijte þíselná tlaþítka pro zadání jiného þísla kanálu, které chcete nastavit, potom stisknČte OK.
Nové þíslo kanálu : [PĜesunout] MĤžete umístit aktuální program na nové þíslo kanálu. 3
Použijte Ÿ / ź pro volbu kanálu, který chcete, potom stisknČte YELLOW a použijte þíselná tlaþítka pro zadání þísla nepoužívaného kanálu, který chcete nastavit, potom stisknČte OK.
[Informace o signálu]
Nastavení PC
Obsluha digitálního televizoru MĤžete vidČt podrobné informace o programu.
MĤžete upravit polohu obrazovky PC, velikost a fáze.
2
Stisknutím Ÿ / ź zvolte [Informace o signálu], potom stisknČte OK.
[CI informace] Obsluha digitálního televizoru MĤžete vidČt podrobné informace o spoleþném rozhraní, pokud jste vložili CI kartu. 2
DĜíve než zaþnete Musíte pĜipojit váš poþítaþ k tomuto pĜístroji a zvolit [PC] v nastavení [Vstupní zdroj]. Viz kapitola „PĜepínání vstupního režimu“ (str. 6). 1
Stisknutím Ż / Ź zvolte [OBRAZOVKA].
Stisknutím Ÿ / ź zvolte [CI informace], potom stisknČte OK.
Automatické nastavení
• Nezaruþujeme, že na tomto pĜístroji budou podporovány všechny karty.
OBRAZOVKA
Přesunout
Posuv vodorovně
50
Posuv svisle
50
Velikost
50
Fáze
69
Vynulování polohy
Návrat
Volba
Ukončit
[Automatické nastavení] 2
Stisknutím Ÿ / ź zvolte [Automatické nastavení], potom stisknČte OK.
• Každé nastavení se upraví automaticky.
[Posuv vodorovnČ] / [Posuv svisle] / [Velikost] / [Fáze] 2
Stisknutím Ÿ / ź pro volbu požadované položky a upravte nastavení podle svých potĜeb.
• Jakmile stisknete OK a objeví se displej nastavení, mĤžete zaþít s úpravami.
[Vynulování polohy] 2
Stisknutím Ÿ / ź zvolte [Vynulování polohy], potom stisknČte OK.
12 CS
Nastavení obrazu
[Podání barev]
Obraz lze nastavit podle vašich osobních požadavkĤ. Nastavení se po opuštČní nabídky obrazu automaticky uloží. 1 Použijte Ż / Ź pro volbu [OBRAZ].
MĤžete zmČnit barevný odstín obrazu. 2
Stisknutím Ÿ / ź zvolte [Podání barev], potom stisknČte OK.
3
Použijte Ÿ / ź pro volbu [Studené], [Normální] nebo [Teplé], poté stisknČte OK.
[Redukce šumu] Režim obrázků
Standardní
Kontrast Jas Barevná sytost Barevný tón
OBRAZ
Ostrost Normální
Podání barev Redukce šumu
Střední
Podsvícení
Přesunout
Návrat
Volba
Ukončit
MĤžete nastavit, aby se ménČ zobrazovaly chyby digitalizace zpĤsobené komprimací. 2
Stisknutím Ÿ / ź zvolte [Redukce šumu], potom stisknČte OK.
3
Použijte Ÿ / ź pro volbu [Vypnuto], [Nízký], [StĜední], [Vysoký] nebo [PĜedvolené], poté stisknČte OK.
[Režim obrázkĤ] 2
Stisknutím Ÿ / ź zvolte [Režim obrázkĤ], potom stisknČte OK.
3
Použijte Ÿ / ź pro volbu [Dynamický], [Standard], [Jemný] nebo [Osobní], potom stisknČte OK.
• Režim obrazu mĤžete snadno zmČnit použitím PICTURE MODE. • StisknČte opakovanČ PICTURE MODE pro volbu požadovaného režimu obrazu. U této funkce mĤžete individuálnČ nastavit režim obrazu pro každý vstup.
[Kontrast] / [Jas] / [Barevná sytost] / [Barevný tón] / [Ostrost] 2
Použijte Ÿ / ź pro volbu požadované položky, potom stisknČte OK, zobrazí se nastavení displeje. Nastavení upravte pomocí Ż / Ź.
• MĤžete upravit nastavení, pokud nastavíte [Osobní] v [Režim obrázkĤ].
13 CS
[Podsvícení] MĤžete nastavit jas podsvícení. 2
Použijte Ÿ / ź pro volbu [Podsvícení], potom stisknČte OK, zobrazí se nastavení displeje. Nastavení upravte pomocí Ż / Ź.
Nastavení zvuku
[SPDIF Mode]
Zvuk lze nastavit podle vašich osobních požadavkĤ. 1 Použijte Ż / Ź pro volbu [ZVUK].
2
Standardní
Režim zvuku Výšky Hloubky Vyvážení
PCM
SPDIF Mode
ZVUK
Vypnuto
AD Switch
StisknČte Ÿ / ź pro volbu [SPDIF Mode], potom zvolte [PCM], [Auto] nebo [Vypnuto] pomocí Ż / Ź.
[PCM] : PCM [Auto] : Dolby Digital (pokud je dostupné)
[AD Switch] Přesunout
Návrat
Volba
Ukončit
[Režim zvuku] 2
Stisknutím Ÿ / ź zvolte [Režim zvuku], potom stisknČte OK.
3
Použijte Ÿ / ź pro volbu [Standard], [Hudba], [Film], [Sporty] nebo [Osobní], poté stisknČte OK.
Obsluha digitálního televizoru Je možné nastavit zvukový výstup a hlasitost zvuku pro zrakovČ postižení. 2
StisknČte Ÿ / ź pro volbu [AD Switch], potom zvolte [Vypnuto] nebo [Zapnuto] pomocí Ż / Ź.
• PĜi použití této funkce je k dispozici pouze zvuk MPEG.
• Režim zvuku mĤžete snadno zmČnit použitím SOUND MODE. • StisknČte opakovanČ SOUND MODE pro volbu požadovaného režimu zvuku.
[Výšky] / [Hloubky] / [Vyvážení] MĤžete nastavit levý/pravý reproduktor. 2
Použijte Ÿ / ź pro volbu požadované položky, potom stisknČte OK, zobrazí se nastavení displeje. Nastavení upravte pomocí Ż / Ź.
• MĤžete upravit nastavení [Výšky] a [Hloubky], pokud nastavíte [Osobní] v [Režim zvuku].
14 CS
Nastavení þasu
[Automatický pohotovostní režim]
MĤžete zmČnit nastavení þasu.
MĤžete nastavit þas automatického pĜechodu do pohotovostního režimu, když není zjištČna žádná aktivita po zapnutí pĜístroje. I pĜes toto nastavení se pĜístroj automaticky pĜepne do pohotovostního režimu, pokud nepĜichází žádný vstupní signál z antény nebo je pĜístroj po dobu 15 minut v neþinnosti.
• [Hodiny] zmČní oblast, kterou jste zvolili v þasové zónČ.
1
Použijte Ż / Ź pro volbu [ýAS].
Hodiny
ČAS
Přesunout
Návrat
Čec
Časová zóna
GMT+1
Časovač vypnutí
Vypnuto
Automatický pohotovostní režim
4H
Časovač OSD
15 S
Volba
Ukončit
[ýasová zóna]
2
Stisknutím Ÿ / ź zvolte [Automatický pohotovostní režim], potom stisknČte OK.
3
Použijte Ÿ / ź pro volbu požadovaného kanálu, poté stisknČte OK.
[ýasovaþ OSD] MĤžete nastavit dobu zobrazení OSD, když není zjištČna žádná aktivita po stisknutí MENU.
MĤžete nastavit þasové pásmo podle místa vašeho bydlištČ.
2
Stisknutím Ÿ / ź zvolte [ýasovaþ OSD], potom stisknČte OK.
2
Stisknutím Ÿ / ź zvolte [ýasová zóna], potom stisknČte OK.
3
Použijte Ÿ / ź pro volbu požadovaného kanálu, poté stisknČte OK.
3
Použijte Ÿ / ź / Ż / Ź pro volbu požadovaného kanálu, poté stisknČte OK.
• I když zvolíte [Auto], správný þas se nemusí na „ýasovaþ vypnutí“ (str. 6) zobrazit, v závislosti na vlastnostech DTV vysílání.
[ýasovaþ vypnutí] ýasovaþ vypnutí slouží k nastavení þasu, po kterém pĜístroj pĜejde do pohotovostního režimu. 2
Stisknutím Ÿ / ź zvolte [ýasovaþ vypnutí], potom stisknČte OK.
3
Použijte Ÿ / ź pro volbu požadovaného kanálu, poté stisknČte OK.
• MĤžete také nastavit tlaþítka na dálkovém ovládání, viz „ýasovaþ vypnutí“ (str. 6).
15 CS
Nastavení zámku
[Nastavit heslo]
MĤžete nastavit následující nastavení zámku.
MĤžete nastavit vlastní PIN kód.
Než zmČníte nastavení zámku
2
Musíte si pamatovat vlastní PIN kód. Každé nastavení zámku vyžaduje PIN kód.
Stisknutím Ÿ / ź zvolte [Nastavit heslo], potom stisknČte OK.
3
Použijte þíselná tlaþítka a zadejte nové 4-místné þíslo.
4
Použijte þíselná tlaþítka a znovu zadejte stejné 4-místné þíslo.
1
Použijte Ż / Ź pro volbu [ZÁMEK].
[Blokovat program] Zamknout systém
Vypnuto
Nastavit heslo Blokovat program ZÁMEK
Rodičovská kontrola
Vypnuto
Zámek klávesnice
Vypnuto
2
Stisknutím Ÿ / ź zvolte [Blokovat program], potom stisknČte OK.
3
Stisknutím GREEN uzamknete aktuální kanál.
Režim Hotel
Přesunout
Návrat
Volba
Ukončit
• Pro odemknutí kanálu zadejte PIN kód, který jste nastavili.
[Rodiþovská kontrola]
[Zamknout systém] MĤžete nastavit všechna nastavení zámku. Pokud nastavíte [Zapnuto], budou fungovat všechna nastavení zámku.
MĤžete nastavit vČkovou pĜístupnost, aby se na nevhodný kanál nemohly dívat dČti. 2
Stisknutím Ÿ / ź zvolte [Rodiþovská kontrola], potom stisknČte OK. Stisknutím Ÿ / ź zvolte vČkové omezení a poté stisknČte OK.
2
Stisknutím Ÿ / ź zvolte [Zamknout systém], potom stisknČte OK.
3
3
Použijte þíselná tlaþítka pro zadání 4-místného PIN kódu, který jste nastavili.
[Zámek klávesnice]
• Pokud jste nenastavili PIN kód jako Francii, zadejte 0001. • Pokud jste nenastavili PIN kód jako jinou zemi, zadejte 0000.
MĤžete nastavit [Zámek klávesnice] a odemknout jej PIN kódem. 2
• Když zadáte správný PIN kód, mĤžete zmČnit následující nastavení. • Až se pĜesunete na další nastavení, musíte znovu zadat PIN kód, abyste pĜešli na nastavení Rodiþovského zámku. • Pokud nastavíte [Zapnuto], níže uvedená nastavení vyžadují zadání PIN kódu v dĤsledku zmČny nastavení. : [Auto ladČní], [Analogové manuální ladČní], [Digitální manuální ladČní], [Editace programu], [První instalace] a [Vynulovat].
StisknČte Ÿ / ź pro volbu [Zámek klávesnice], potom zvolte [Zapnuto] nebo [Vypnuto] pomocí Ż / Ź.
• Pokud nastavíte [Zapnuto], nemĤžete používat tlaþítka na pĜístroji.
[Režim Hotel] 2
Použijte Ÿ / ź pro volbu [Režim Hotel], potom stisknČte OK pro vstup do [Režim Hotel] menu.
• Podívejte se na „Nastavení režimu Hotel“ (str. 17). Zadejte heslo
Vymazat
Zrušit
16 CS
Nastavení režimu Hotel
[Uzamknutí zdroje]
Musíte zadat [Zamknout systém], abyste mohli pokraþovat v nastavení režimu Hotel. Podrobnosti viz „Nastavení zámku“ (str. 16). 1 Použijte Ż / Ź pro volbu [ZÁMEK].
MĤžete zamykat zdroje jeden po druhém. Pokud nastavíte [Zapnuto], zdroj se neobjeví na displeji.
2
Stisknutím Ÿ / ź zvolte [Zamknout systém], potom stisknČte OK.
Zamknout systém
5
Použijte Ÿ / ź pro volbu [Uzamknutí zdroje], potom stisknČte OK.
6
Použijte Ÿ / ź pro volbu zdroje, který chcete, potom stisknČte OK pro nastavení [Zapnuto].
Vypnuto
Nastavit heslo Blokovat program ZÁMEK
Přesunout
Rodičovská kontrola
Vypnuto
Zámek klávesnice
Vypnuto
Režim Hotel
Návrat
UZAMKNUTÍ ZDROJE
Volba
Vypnuto
DTV
Vypnuto
Média
Vypnuto
AV
Vypnuto
PC
Vypnuto
Component
Vypnuto
SCART
Vypnuto
HDMI1
Vypnuto
HDMI2
Vypnuto
Ukončit Přesunout
3
ATV
Použijte þíselná tlaþítka pro zadání 4-místného PIN kódu, který jste nastavili.
Návrat
Volba
Ukončit
[PĜedvolený zdroj]
[Režim Hotel]
MĤžete nastavit první zobrazovaný zdroj, když se pĜístroj zapne.
4
Použijte Ÿ / ź pro volbu [Režim Hotel], potom stisknČte OK pro vstup do [Režim Hotel] menu.
5
Použijte Ÿ / ź pro volbu [PĜedvolený zdroj], potom stisknČte OK.
5
Použijte Ÿ / ź pro volbu [Režim Hotel], potom stisknČte Ż / Ź pro volbu [Zapnuto] a pro úpravu následujících nastavení.
6
Použijte Ÿ / ź pro volbu zdroje, který chcete, potom stisknČte OK pro výchozí nastavení .
Režim Hotel
Zapnuto
Uzamknutí zdroje Předvolený zdroj Předvolený program Max. hlasitost
HOTEL
ATV 3 100
Import Export
[PĜedvolený program] Pokud nastavíte [ATV] v [PĜedvolený zdroj], mĤžete nastavit þíslo prvního zobrazovaného ATV programu, když se pĜístroj zapne. 5
Použijte Ÿ / ź pro volbu [PĜedvolený program], potom stisknČte OK.
6
Použijte Ÿ / ź pro volbu programu, který chcete, potom stisknČte OK pro výchozí nastavení .
Vymazat uzamčení
Přesunout
17 CS
Návrat
Volba
Ukončit
[Max. hlasitost]
Úprava nastavení
MĤžete nastavit maximální limit hlasitosti zvuku.
MĤžete zmČnit další nastavení. 1 Použijte Ż / Ź pro volbu [NASTAVENÍ].
5
Použijte Ÿ / ź pro volbu [Max. hlasitost], potom stisknČte Ż / Ź pro nastavení maximálního limitu hlasitosti zvuku.
OSD jazyk
• Pokud nastavíte [Zapnuto], nemĤžete zvýšit hlasitost nad nastavenou hlasitost.
Poměr stran
• Po importu pĜístroj automaticky pĜejde do pohotovostního režimu. • Pokud není vložena USB flash pamČĢ, objeví se chybová zpráva.
[Export] MĤžete exportovat aktuální nastavení menu na USB flash pamČĢ. 5
Použijte Ÿ / ź pro volbu [Export], potom stisknČte OK.
• PĜi exportu se LED kontrolka na þelním panelu rozsvítí þervenČ. (Bude to trvat 5 - 10 sekund.) • Po exportu se neobjeví žádná zpráva. • Dokonþení exportu dat trvá asi 10 sekund. • Pokud není vložena USB flash pamČĢ, objeví se chybová zpráva.
Vypnuto 16:9
První instalace
NASTAVENÍ
Vynulovat CEC
Vypnuto
Aktualizace softwaru(USB)
MĤžete importovat nastavení režimu Hotel z USB flash pamČti. Použijte Ÿ / ź pro volbu [Import], potom stisknČte OK.
Západ
Pro sluchově postižené
[Import]
5
English
TT Jazyky
Přesunout
Návrat
Volba
Ukončit
[OSD jazyk] MĤžete zvolit upĜednostĖovaný jazyk. 2
Stisknutím Ÿ / ź zvolte [OSD jazyk], potom stisknČte OK.
3
Použijte Ÿ / ź / Ż / Ź pro volbu požadovaného kanálu, poté stisknČte OK.
[TT Jazyky] MĤžete zvolit upĜednostĖovaný jazyk teletextu. 2
Stisknutím Ÿ / ź zvolte [TT Jazyky], potom stisknČte OK.
3
Použijte Ÿ / ź / Ż / Ź pro volbu požadovaného kanálu, poté stisknČte OK.
• MĤžete také nastavit tlaþítka na dálkovém ovládání, viz „Nastavení teletextu“ (str. 6).
[Vymazat uzamþení] MĤžete obnovit nastavení režimu Hotel. 5
Použijte Ÿ / ź pro volbu [Vymazat uzamþení], potom stisknČte OK.
18 CS
[Pro sluchovČ postižené]
[První instalace]
MĤžete nastavit režim pro sluchovČ postižené.
Tato þást vás provede poþáteþním nastavením pĜístroje zahrnujícím volbu jazyka vaší nabídky na obrazovce a automatické vyhledávání, které automaticky vyhledá a uloží do pamti nalezené kanály.
2
StisknČte Ÿ / ź pro volbu [Pro sluchovČ postižené], potom zvolte [Zapnuto] nebo [Vypnuto] pomocí Ż / Ź.
[Pro sluchovČ postižené]: Nabízí zvukovou službu pro sluchovČ postižené.
2
Stisknutím Ÿ / ź zvolte [První instalace], potom stisknČte OK.
[Systém souborĤ PVR]
První instalace
MĤžete zkontrolovat rychlost USB. 2
Domácí režim
Stisknutím Ÿ / ź zvolte [Systém souborĤ PVR], potom stisknČte OK.
OSD jazyk
[PomČr stran] MĤžete zmČnit režim zobrazení na televizní obrazovce. 2
Stisknutím Ÿ / ź zvolte [PomČr stran], potom stisknČte OK.
3
Stisknutím Ÿ / ź zvolte požadovaný režim zobrazení, poté stisknČte OK.
Dostupné možnosti jsou uvedeny níže. [ATV], [DTV], [AV], [SCART]: [Auto], [4:3], [16:9], [Zoom1], [Zoom2] [PC]: [4:3], [16:9] [Component]:
OK
3
Stisknutím Ż / Ź zvolte místo použití.
• Když zvolíte [Domácí režim], tento pĜístroj se nastaví tak, aby maximalizoval energetickou úþinnost domácího nastavení. Toho lze dosáhnout úpravou kvality a zvuku podle vaší volby. • Pokud zvolíte na tomto pĜístroji [Režim maloobchodu], bude použito pĜeddefinované nastavení pro displeje v obchodech. • Pokud zvolíte [Režim maloobchodu], zobrazí se potvrzovací zpráva.
4
StisknČte Ÿ / ź pro volbu [OSD jazyk], potom zvolte požadovaný jazyk pomocí Ż / Ź.
5
Stisknutím Ÿ / ź zvolte [Auto ladČní], potom stisknČte OK.
6
StisknČte Ÿ / ź pro volbu [ZemČ], potom zvolte požadovanou zemi pomocí Ż / Ź.
7
Použijte Ÿ / ź pro volbu [Typ ladČní] a potom zvolte [DTV], [ATV] nebo oba kanály pomocí Ż / Ź.
[4:3], [16:9], [Zoom1], [Zoom2] [HDMI]:
Česky
Auto ladění
[4:3], [16:9], [Zoom1], [Zoom2], [Jen vyhledávání]
< Pro DVB-T vyhledávání > Auto ladění Česká republika
Země Typ ladění
DVB-T
Scan Type
Standard
Network ID
Auto
Frekvence
Auto
Symbol Rate OK
8
19 CS
ATV + DTV
Digital Type
Auto Menu
StisknČte OK pro zahájení vyhledávání.
< Pro DVB-C vyhledávání > Auto ladění Česká republika
Země Typ ladění
ATV + DTV
Digital Type
DVB-C
Scan Type
Standard
Network ID
Auto
Frekvence
Auto
Symbol Rate OK
[Vynulovat] Všechna nastavení, kromČ nastavení kanálĤ a rodiþovského zámku, lze obnovit na výchozí hodnoty. 2
Stisknutím Ÿ / ź zvolte [Vynulovat], potom stisknČte OK.
3
StisknČte Ż pro volbu [Ano] pro obnovení pĤvodního nastavení.
Auto Menu
• Když zvolíte [Ano], pĜístroj pĜejde do pohotovostního režimu a automaticky se zapne.
8
Použijte Ÿ / ź pro volbu [Digital Type] a potom zvolte [DVB-C] pomocí Ż / Ź.
[CEC]
9
Použijte Ÿ / ź pro volbu [Scan Type] a potom zvolte [Standard] nebo [Pokroþilé] pomocí Ż / Ź.
Když nastavíte [Zapnuto], funkce HDMI CEC umožní, aby vaše zaĜízení jednalo v souladu s tímto pĜístrojem.
10
Použijte Ÿ / ź pro volbu požadované položky, potom upravte nastavení pomocí Ż / Ź.
2
11
StisknČte OK pro zahájení vyhledávání.
• Vaše zaĜízení musí být kompatibilní s HDMI CEC, aby bylo možné používat tuto funkci.
• Objeví se nabídka pro potvrzení vyhledání kanálĤ. • V pĜípadČ, kdy v režimu vyhledávání [Standard] (BČžný) nejsou nalezeny všechny dostupné kabelové kanály, mohou být tyto programy vyhledány zvolením režimu [Pokroþilé]. PĜipomínáme, že režim vyhledávání [Pokroþilé] mĤže zabrat další þas. • V závislosti na specifikaci poskytovatele kabelové televize nemĤže být zaruþeno správné pĜedplatné kabelových signálĤ.
StisknČte Ÿ / ź pro volbu [CEC], potom zvolte [Zapnuto] nebo [Vypnuto] pomocí Ż / Ź.
• Nezaruþujeme, že na tomto pĜístroji budou podporována všechna zaĜízení.
[Aktualizace softwaru(USB)] Je možné aktualizovat software pomocí USB. 2
Stisknutím Ÿ / ź zvolte [Aktualizace softwaru(USB)], potom stisknČte OK.
• Po dokonþení vyhledávání se zobrazí nejnižší digitální nebo analogový kanál uložený v pamČti. • Pokud bČhem vyhledávání kanálĤ stisknete MENU, vyhledávání se zastaví. Pokud stisknete MENU ještČ jednou, opustíte první nastavení.
20 CS
ODSTRAĕOVÁNÍ ZÁVAD NČkdy lze provozní problém snadno vyĜešit kontrolou napohled zjevných, ale þasto opomíjených možností. PĜedtím, než se obrátíte na servis, zkontrolujte následující položky. MĤžete ušetĜit þas i peníze. Problém
Možné Ĝešení
Dálkový ovladaþ nefunguje
• Je pĜístroj zapojený v zásuvce? • Je zásuvka pod napČtím? • Zkontrolujte baterie v dálkovém ovladaþi.
Pruhy na obrazovce
• Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • OvČĜte možné místní rušivé vlivy.
Nekvalitní obraz
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • PĜíliš nízká okolní teplota.
Obraz se vertikálnČ pohybuje
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • OvČĜte možné místní rušivé vlivy.
Chybí barvy
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Je ke konektoru antény na zadní stranČ pĜístroje pĜipojena anténa? • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • Upravte nastavení [Barevná sytost].
Slabý pĜíjem nČkterých kanálĤ
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Je ke konektoru antény na zadní stranČ pĜístroje pĜipojena anténa? • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • OvČĜte možné místní rušivé vlivy.
Slabý obraz
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Je ke konektoru antény na zadní stranČ pĜístroje pĜipojena anténa? • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • Upravte nastavení [Kontrast] a [Jas]. • PĜíliš nízká okolní teplota.
ýáry nebo pruhy na obrazovce
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • OvČĜte možné místní rušivé vlivy.
21 CS
Násobný obraz (duchy)
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Je ke konektoru antény na zadní stranČ pĜístroje pĜipojena anténa? • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • OvČĜte možné místní rušivé vlivy.
Neostrý obraz
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel.
Zvuk funguje, ale obraz ne
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Je ke konektoru antény na zadní stranČ pĜístroje pĜipojena anténa? • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • OvČĜte možné místní rušivé vlivy. • Upravte nastavení [Kontrast] a [Jas].
Obraz funguje, ale zvuk ne
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • OvČĜte možné místní rušivé vlivy.
Nefunguje obraz ani zvuk
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice. • Je pĜístroj zapojený v zásuvce? • Je zásuvka pod napČtím? • Je pĜístroje zapnutý? • Je ke konektoru antény na zadní stranČ pĜístroje pĜipojena anténa? • Používáte-li venkovní anténu, zkontrolujte, zda není poškozený kabel. • Vypojte pĜístroj z elektrické zásuvky pĜibližnČ na 1 minutu, poté ho opČt zapojte a zapnČte.
RĤzné barevné skvrny na obrazovce
• Zkuste nový kanál. Pokud funguje, závada mĤže být na stranČ špatného pĜíjmu stanice.
ýerný nebo svítící bod na obrazovce • Je to kvalitou panelu LCD.
22 CS
TECHNICKÉ PARAMETRY 21,6 palce (22FL532/10, 22FL552/10) LCD
26 palcĤ (26FL532/10, 26FL552/10) 31,5 palce (32FL532/10, 32FL552/10)
Televizní systém
DVB-T(MPEG2/H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L (22FL532/10, 26FL532/10, 32FL532/10) DVB-T/C(MPEG2/MPEG4-H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L (22FL552/10, 26FL552/10, 32FL552/10) 1,5 W, 8 ȍ × 2(22FL532/10, 22FL552/10)
Výstup zvuku
10 W, 8 ȍ × 2 (26FL532/10, 26FL552/10) 10 W, 8 ȍ × 2 (32FL532/10, 32FL552/10)
Dálkové ovládání
DigitálnČ zakódované infraþervené svČtlo
Provozní teplota
5 °C až 40 °C AC 220-240 V ~ , 50 Hz (22FL532/10, 22FL552/10)
Energetické požadavky
AC 220-240 V ~ , 50 Hz (26FL532/10, 26FL552/10) AC 220-240 V ~ , 50 Hz (32FL532/10, 32FL552/10) 28 W (pohotovostní režim: ménČ než 0,5 W) (22FL532/10, 22FL552/10)
PĜíkon
40 W (pohotovostní režim: ménČ než 0,5 W) (26FL532/10, 26FL552/10) 42 W (pohotovostní režim: ménČ než 0,5 W) (32FL532/10, 32FL552/10)
Konektory Anténa
UHF/VHF 75 ohmĤ
Vstup audio
RCA konektor 2x (L/R)
Vstup pro kompozitní video
RCA konektor 1x
Vstup pro komponentní video
RCA konektor 3x (Y/Pb/Pr)
HDMI vstup
HDMI 19 kolíkĤ 2x
PC vstup
D-Sub 15 kolíkĤ 1x (RGB) / Mini konektor Ø3,5 mm 1x (Audio)
SCART
SCART 1x
Audio výstup sluchátek
Mini konektor Ø3,5 mm 1x
Koaxiální digitální audio výstup
RCA konektor 1x
USB konektor
USB 1x
Spoleþné rozhraní
CI slot 1x
23 CS
RozmČry bez podstavce
RozmČry s podstavcem
V: 347,0 mm / Š: 531,0 mm / H: 51,0 mm (22FL532/10, 22FL552/10) V: 403,8 mm / Š: 634,4 mm / H: 56,5 mm (26FL532/10, 26FL552/10) V: 473,5 mm / Š: 755,0 mm / H: 56,5 mm (32FL532/10, 32FL552/10) V: 384,4 mm / Š: 531,0 mm / H: 135,5 mm (22FL532/10, 22FL552/10) V: 447,9 mm / Š: 634,4 mm / H: 180,2 mm (26FL532/10, 26FL552/10) V: 517,6 mm / Š: 755,0 mm / H: 180,2 mm (32FL532/10, 32FL552/10)
• Bez vyþnívajících þástí. Hmotnost bez podstavce
3,62 kg (22FL532/10, 22FL552/10) 5,21 kg (26FL532/10, 26FL552/10) 6,88 kg (32FL532/10, 32FL552/10)
v
Hmotnost s podstavcem
3,80 kg (22FL532/10, 22FL552/10) 5,60 kg (26FL532/10, 26FL552/10) 7,27 kg (32FL532/10, 32FL552/10)
22FL532/10 22FL552/10 26FL532/10 26FL552/10 32FL532/10 32FL552/10 ★★★