Langkah-langkah instalasi vmware pada Debian 4.0 (Etch)

Penulis: Abdullah A. Koro Email: [email protected] Update terakhir: 08/13/07

Langkah-langkah instalasi vmware pada Debian 4.0 (Etch) Tutorial ini dibuat terinspirasi dari situs howtoforge.com dengan artikel berjudul “How to install vmware server on Debian 4.0 (Etch)”. Hal lain yang juga memicu tulisan ini yaitu dari kebutuhan agar dapat menggunakan bermacam-macam sistem operasi dalam satu komputer. Biasanya selama ini digunakan dual-boot. Namun dirasakan masih kurang karena sistem dual boot semisal satu komputer diinstall dua sistem operasi Windows XP dan Debian Linux. Ketika menggunakan Windows XP dan ingin pindah ke Debian Linux terpaksa harus restart komputer terlebih dahulu. Begitu juga sebaliknya. Dengan adanya vmware ini, terutama vmware server yang untungnya lagi gratis, maka kita tidak perlu memboot bila ingin pindah dari sistem operasi yang satu dengan yang lain. Malah seolah-olah kita mempunyai beberapa atau banyak sistem operasi pada satu komputer. Hanya kekurangannya adalah kita harus mempunyai RAM yang cukup besar. Pengalaman pribadi, sekurangnya 512 MB RAM harus dimiliki. Karena RAM ini nantinya akan digunakan oleh sistem operasi utama/induk/tuan rumah (Host OS) dan juga akan digunakan oleh sistem operasi tamu (Guest OS). Sebagai tambahan informasi, kami tidak menjamin anda pasti akan dapat menginstall vmware menggunakan langkah-langkah yang diberikan. Tetapi kami berusaha membagi pengalaman kami ini sebagai sesama pengguna. Anda juga bisa memberitahukan kami bila ada hal-hal yang salah pada dokumen tutorial ini. Berikut sistem komputer yang digunakan: ● ● ● ●

CPU: Intel P4 3.0 Ghz RAM: 512 HDD: SATA 80 GB IP Address: 192.168.0.106 (dari DHCP)

koro@debian:~$ /sbin/ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:14:85:E5:A1:0D inet addr:192.168.0.106 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: 2001:e00:f00c:142:214:85ff:fee5:a10d/64 Scope:Global inet6 addr: fe80::214:85ff:fee5:a10d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:967271 errors:0 dropped:0 overruns:0 frame:0 TX packets:338481 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:513268319 (489.4 MiB) TX bytes:41415344 (39.4 MiB) Interrupt:177 Base address:0xc000 ●

Isi file /etc/network/interfaces:

Halaman 1 dari 22 halaman

koro@debian:~$ more /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allowhotplug eth0 iface eth0 inet dhcp ●

Isi file /etc/resolv.conf sebagai setting DNS Client:

koro@debian:~$ more /etc/resolv.conf nameserver 152.118.24.2 ●

Isi file /etc/hosts:

koro@debian:~$ more /etc/hosts 127.0.0.1 localhost 127.0.1.1 debian.fib.ui.ac.id debian # The following lines are desirable for IPv6 capable hosts ::1 ip6localhost ip6loopback fe00::0 ip6localnet ff00::0 ip6mcastprefix ff02::1 ip6allnodes ff02::2 ip6allrouters ff02::3 ip6allhosts ●

Isi file /etc/apt/sources.list

debian:/home/koro/Desktop/Downloads/vmwareserverdistrib# more /etc/apt/sources.list # # deb cdrom:[Debian GNU/Linux 4.0 r0 _Etch_ Official i386 DVD Binary1 20070407 11:40]/ etch contrib main #deb cdrom:[Debian GNU/Linux 4.0 r0 _Etch_ Official i386 DVD Binary1 20070407 11:40]/ etch contrib main deb http://kambing.ui.edu/debian/ etch contrib main # Line commented out by installer because it failed to verify: #deb http://security.debian.org/ etch/updates main contrib # Line commented out by installer because it failed to verify: #debsrc http://security.debian.org/ etch/updates main contrib


1. Pra instalasi: Download dan Install paket software yang dibutuhkan vmware Sebelum melakukan instalasi vmware ada beberapa program yang dibutuhkan. Bila anda melakukan instalasi Debian 4.0 secara default, maka program gcc (compiler bahasa C) belum terdapat. Setelah itu lakukan perintah berikut untuk menginstall paket-paket software yang dibutuhkan Vmware. # aptget install linuxheaders`uname r` libx116 libx11dev xwindowsystem core xwindowsystem xspecs libxtst6 psmisc buildessential

Jangan lupa lakukan dengan menggunakan account root atau menggunakan sudo. Maka yang akan muncul pada layar komputer seperti berikut: debian:/home/koro/download/vmwareserverdistrib# aptget install linuxheaders `uname r` libx116 libx11dev xwindowsystemcore xwindowsystem xspecs libxtst6 psmisc buildessential Reading package lists... Done Building dependency tree... Done libx116 is already the newest version. libxtst6 is already the newest version. psmisc is already the newest version. The following extra packages will be installed: g++ g++4.1 libc6dev libstdc++64.1dev libxaudev libxdmcpdev libxextdev linuxheaders2.6.184 linuxkbuild2.6.18 linuxkernelheaders x11protocoredev x11protoinputdev x11protokbdev x11protoxextdev xtransdev Suggested packages: gcc4.1doc lib64stdc++6 glibcdoc manpagesdev libstdc++64.1doc The following NEW packages will be installed: buildessential g++ g++4.1 libc6dev libstdc++64.1dev libx11dev libxaudev libxdmcpdev libxextdev linuxheaders2.6.184 linuxheaders2.6.184686 linuxkbuild2.6.18 linuxkernelheaders xwindowsystem xwindowsystemcore x11protocoredev x11protoinputdev x11protokbdev x11protoxextdev xspecs xtransdev 0 upgraded, 21 newly installed, 0 to remove and 0 not upgraded. Need to get 19.6MB of archives. After unpacking 77.7MB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://kambing.ui.edu etch/main x11protocoredev 7.0.72 [78.4kB] Get:2 http://kambing.ui.edu etch/main libxaudev 1:1.0.12 [10.8kB] Get:3 http://kambing.ui.edu etch/main libxdmcpdev 1:1.0.12 [13.8kB] Get:4 http://kambing.ui.edu etch/main x11protoinputdev 1.3.24 [14.6kB] Get:5 http://kambing.ui.edu etch/main x11protoxextdev 7.0.25 [41.7kB] Get:6 http://kambing.ui.edu etch/main libxextdev 1:1.0.12 [74.9kB] Get:7 http://kambing.ui.edu etch/main x11protokbdev 1.0.32 [26.8kB] Get:8 http://kambing.ui.edu etch/main xtransdev 1.0.13 [59.0kB] Get:9 http://kambing.ui.edu etch/main libx11dev 2:1.0.37 [1269kB] Get:10 http://kambing.ui.edu etch/main linuxkernelheaders 2.6.187 [1875kB] Get:11 http://kambing.ui.edu etch/main libc6dev 2.3.6.ds113 [2716kB] Get:12 http://kambing.ui.edu etch/main libstdc++64.1dev 4.1.121 [1634kB]


Get:13 http://kambing.ui.edu etch/main g++4.1 4.1.121 [2615kB] Get:14 http://kambing.ui.edu etch/main g++ 4:4.1.115 [1360B] Get:15 http://kambing.ui.edu etch/main buildessential 11.3 [6982B] Get:16 http://kambing.ui.edu etch/main linuxheaders2.6.184 2.6.18.dfsg.112 [3163kB] Get:17 http://kambing.ui.edu etch/main linuxkbuild2.6.18 2.6.181 [168kB] Get:18 http://kambing.ui.edu etch/main linuxheaders2.6.184686 2.6.18.dfsg.112 [275kB] Get:19 http://kambing.ui.edu etch/main xwindowsystem 1:7.1.016 [18.3kB] Get:20 http://kambing.ui.edu etch/main xwindowsystemcore 1:7.1.016 [18.3kB] Get:21 http://kambing.ui.edu etch/main xspecs 1:1.2+git200611053 [5529kB] Fetched 19.6MB in 42m14s (7737B/s) Selecting previously deselected package x11protocoredev. (Reading database ... 72074 files and directories currently installed.) Unpacking x11protocoredev (from .../x11protocoredev_7.0.72_all.deb) ... Selecting previously deselected package libxaudev. Unpacking libxaudev (from .../libxaudev_1%3a1.0.12_i386.deb) ... Selecting previously deselected package libxdmcpdev. Unpacking libxdmcpdev (from .../libxdmcpdev_1%3a1.0.12_i386.deb) ... Selecting previously deselected package x11protoinputdev. Unpacking x11protoinputdev (from .../x11protoinputdev_1.3.24_all.deb) ... Selecting previously deselected package x11protoxextdev. Unpacking x11protoxextdev (from .../x11protoxextdev_7.0.25_all.deb) ... Selecting previously deselected package libxextdev. Unpacking libxextdev (from .../libxextdev_1%3a1.0.12_i386.deb) ... Selecting previously deselected package x11protokbdev. Unpacking x11protokbdev (from .../x11protokbdev_1.0.32_all.deb) ... Selecting previously deselected package xtransdev. Unpacking xtransdev (from .../xtransdev_1.0.13_all.deb) ... Selecting previously deselected package libx11dev. Unpacking libx11dev (from .../libx11dev_2%3a1.0.37_i386.deb) ... Selecting previously deselected package linuxkernelheaders. Unpacking linuxkernelheaders (from .../linuxkernelheaders_2.6.187_i386.deb) ... Selecting previously deselected package libc6dev. Unpacking libc6dev (from .../libc6dev_2.3.6.ds113_i386.deb) ... Selecting previously deselected package libstdc++64.1dev. Unpacking libstdc++64.1dev (from .../libstdc++64.1dev_4.1.121_i386.deb) ...Selecting previously deselected package g++4.1. Unpacking g++4.1 (from .../g++4.1_4.1.121_i386.deb) ... Selecting previously deselected package g++. Unpacking g++ (from .../g++_4%3a4.1.115_i386.deb) ... Selecting previously deselected package buildessential. Unpacking buildessential (from .../buildessential_11.3_i386.deb) ... Selecting previously deselected package linuxheaders2.6.184. Unpacking linuxheaders2.6.184 (from .../linuxheaders2.6.184_2.6.18.dfsg.1 12_i386.deb) ... Selecting previously deselected package linuxkbuild2.6.18. Unpacking linuxkbuild2.6.18 (from .../linuxkbuild2.6.18_2.6.181_i386.deb) ... Selecting previously deselected package linuxheaders2.6.184686. Unpacking linuxheaders2.6.184686 (from .../linuxheaders2.6.184 686_2.6.18.dfsg.112_i386.deb) ... Selecting previously deselected package xwindowsystem. Unpacking xwindowsystem (from .../xwindowsystem_1%3a7.1.016_all.deb) ... Selecting previously deselected package xwindowsystemcore. Unpacking xwindowsystemcore (from .../xwindowsystemcore_1%3a7.1.0


16_all.deb) ... Selecting previously deselected package xspecs. Unpacking xspecs (from .../xspecs_1%3a1.2+git200611053_all.deb) ... Setting up x11protocoredev (7.0.72) ... Setting up libxaudev (1.0.12) ... Setting up libxdmcpdev (1.0.12) ... Setting up x11protoinputdev (1.3.24) ... Setting up x11protoxextdev (7.0.25) ... Setting up x11protokbdev (1.0.32) ... Setting up xtransdev (1.0.13) ... Setting up linuxkernelheaders (2.6.187) ... Setting up libc6dev (2.3.6.ds113) ... Setting up linuxheaders2.6.184 (2.6.18.dfsg.112) ... Setting up linuxkbuild2.6.18 (2.6.181) ... Setting up linuxheaders2.6.184686 (2.6.18.dfsg.112) ... Setting up xwindowsystem (7.1.016) ... Setting up xwindowsystemcore (7.1.016) ... Setting up xspecs (1.2+git200611053) ... Setting up g++4.1 (4.1.121) ... Setting up libstdc++64.1dev (4.1.121) ... Setting up g++ (4.1.115) ... Setting up buildessential (11.3) ... Setting up libx11dev (1.0.37) ... Setting up libxextdev (1.0.12) ...

2. Download vmware Software vmware dapat di download di alamat http://register.vmware.com/content/download.html Atau download langsung filenya di http://download3.vmware.com/software/vmserver/VMware-server-1.0.3-44356.tar.gz Jangan lupa register terlebih dahulu agar mendapat serial number di http://register.vmware.com/content/registration.html 3. Install vmware Sebelum anda mendownload vmware, pastikan versi Vmware server yang didownload adalah versi 1.0.3. Jika menggunakan versi dibawah itu seperti versi 1.0.0 tidak dapat di install pada Debian 4.0. Extract terlebih dahulu program vmware debian:/home/koro/Desktop/Downloads# ls VMwareserver1.0.344356.tar.gz debian:/home/koro/Desktop/Downloads# tar xvfz VMwareserver1.0.344356.tar.gz

Setelah di extract maka akan terbentuk direktori baru yaitu vmware-server-distrib Halaman 5 dari 22 halaman

debian:/home/koro/Desktop/Downloads# ls l total 104220 rwrr 1 koro koro 106604355 20070810 18:24 VMwareserver1.0.3 44356.tar.gz drwxrxrx 10 root root 4096 20070413 10:24 vmwareserverdistrib

Lalu masuklah ke direktori tersebut debian:/home/koro/Desktop/Downloads# cd vmwareserverdistrib/ debian:/home/koro/Desktop/Downloads/vmwareserverdistrib# ls l total 368 drwxrxrx 2 root root 4096 20070413 10:24 bin drwxrxrx 2 root root 4096 20070413 10:24 doc drwxrxrx 3 root root 4096 20070413 10:24 etc rrr 1 root root 339962 20070413 10:24 FILES drwxrxrx 2 root root 4096 20070413 10:24 installer drwxrxrx 17 root root 4096 20070413 10:24 lib drwxrxrx 3 root root 4096 20070413 10:24 man drwxrxrx 2 root root 4096 20070413 10:24 sbin lrwxrwxrwx 1 root root 23 20070813 08:15 vmwareinstall.pl > bin/vmware uninstall.pl drwxrxrx 5 root root 4096 20070413 10:24 vmwarevix

Kemudian jalankan vmware-install.pl Akan tetapi pastikan perl telah terinstall. Secara default installation perl akan terinstall. debian:/home/koro/Desktop/Downloads/vmwareserverdistrib# ./vmwareinstall.pl A previous installation of VMware software has been detected. The previous installation was made by the tar installer (version 3). Keeping the tar3 installer database format. Uninstalling the tar installation of VMware Server. Stopping VMware services: Virtual machine monitor done The removal of VMware Server 1.0.0 build28343 for Linux completed successfully. Thank you for having tried this software. Installing the content of the package. In which directory do you want to install the binary files? [/usr/bin] What is the directory that contains the init directories (rc0.d/ to rc6.d/)? [/etc] What is the directory that contains the init scripts? [/etc/init.d] In which directory do you want to install the daemon files?


[/usr/sbin] In which directory do you want to install the library files? [/usr/lib/vmware] The path "/usr/lib/vmware" does not exist currently. This program is going to create it, including needed parent directories. Is this what you want? [yes] In which directory do you want to install the manual files? [/usr/share/man] In which directory do you want to install the documentation files? [/usr/share/doc/vmware] The path "/usr/share/doc/vmware" does not exist currently. This program is going to create it, including needed parent directories. Is this what you want? [yes] The installation of VMware Server 1.0.3 build44356 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "/usr/bin/vmwareuninstall.pl". Before running VMware Server for the first time, you need to configure it by invoking the following command: "/usr/bin/vmwareconfig.pl". Do you want this program to invoke the command for you now? [yes] Making sure services for VMware Server are stopped. Stopping VMware services: Virtual machine monitor done You must read and accept the End User License Agreement to continue. Press enter to display it. VMWARE MASTER END USER LICENSE AGREEMENT NOTICE: BY DOWNLOADING AND INSTALLING, COPYING OR OTHERWISE USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT AGREE TO THE TERMS OF THIS EULA, YOU MAY NOT DOWNLOAD, INSTALL, COPY OR USE THE SOFTWARE, AND YOU MAY RETURN THE UNUSED SOFTWARE TO THE VENDOR FROM WHICH YOU ACQUIRED IT WITHIN THIRTY (30) DAYS AND REQUEST A REFUND OF THE LICENSE FEE, IF ANY, ALREADY PAID UPON SHOWING PROOF OF PAYMENT. 1. DEFINITIONS 1.1 "Designated Administrative Access" means that access to the standard user interfaces of a given instance of the Software (designated in this section) that you may grant to a designated third party for which you have provided advance


written notice to VMware that you are providing outsourced services and for whose dedicated benefit you have licensed Do you accept? (yes/no) yes Thank you. Configuring fallback GTK+ 2.4 libraries. In which directory do you want to install the mime type icons? [/usr/share/icons] What directory contains your desktop menu entry files? These files have a .desktop file extension. [/usr/share/applications] In which directory do you want to install the application's icon? [/usr/share/pixmaps] /usr/share/applications/vmwareserver.desktop: error: Categories values must be one of "Core", "Development", "Building", "Debugger", "IDE", "GUIDesigner", "Profiling", "RevisionControl", "Translation", "Office", "Calendar", "ContactManagement", "Database", "Dictionary", "Chart", "Email", "Finance", "FlowChart", "PDA", "ProjectManagement", "Presentation", "Spreadsheet", "WordProcessor", "Graphics", "2DGraphics", "VectorGraphics", "RasterGraphics", "3DGraphics", "Scanning", "OCR", "Photography", "Viewer", "Settings", "DesktopSettings", "HardwareSettings", "PackageManager", "Network", "Dialup", "InstantMessaging", "IRCClient", "FileTransfer", "HamRadio", "News", "P2P", "RemoteAccess", "Telephony", "WebBrowser", "WebDevelopment", "AudioVideo", "Audio", "Midi", "Mixer", "Sequencer", "Tuner", "Video", "TV", "AudioVideoEditing", "Player", "Recorder", "DiscBurning", "Game", "ActionGame", "AdventureGame", "ArcadeGame", "BoardGame", "BlocksGame", "CardGame", "KidsGame", "LogicGame", "RolePlaying", "Simulation", "SportsGame", "StrategyGame", "Education", "Art", "Construction", "Music", "Languages", "Science", "Astronomy", "Biology", "Chemistry", "Geology", "Math", "MedicalSoftware", "Physics", "Teaching", "Amusement", "Applet", "Archiving", "Electronics", "Emulator", "Engineering", "FileManager", "Shell", "ScreenSaver", "TeminalEmulator", "TrayIcon", "System", "Filesystem", "Monitor", "Security", "Utility", "Accessibility", "Calculator", "Clock", "TextEditor", "KDE", "GNOME", "GTK", "Qt", "Motif", "Java", "ConsoleOnly" (found "Application") desktopfileinstall created an invalid desktop file! Unable to install the .desktop menu entry file. You must add it to your menus by hand. /usr/share/applications/vmwareconsoleurihandler.desktop: error: Categories values must be one of "Core", "Development", "Building", "Debugger", "IDE", "GUIDesigner", "Profiling", "RevisionControl", "Translation", "Office", "Calendar", "ContactManagement", "Database", "Dictionary", "Chart", "Email", "Finance", "FlowChart", "PDA", "ProjectManagement", "Presentation", "Spreadsheet", "WordProcessor", "Graphics", "2DGraphics", "VectorGraphics", "RasterGraphics", "3DGraphics", "Scanning", "OCR", "Photography", "Viewer", "Settings", "DesktopSettings", "HardwareSettings", "PackageManager", "Network", "Dialup", "InstantMessaging", "IRCClient", "FileTransfer", "HamRadio", "News", "P2P", "RemoteAccess", "Telephony", "WebBrowser", "WebDevelopment", "AudioVideo", "Audio", "Midi", "Mixer", "Sequencer", "Tuner", "Video", "TV", "AudioVideoEditing", "Player", "Recorder", "DiscBurning", "Game", "ActionGame", "AdventureGame", "ArcadeGame", "BoardGame", "BlocksGame", "CardGame", "KidsGame",


"LogicGame", "RolePlaying", "Simulation", "SportsGame", "StrategyGame", "Education", "Art", "Construction", "Music", "Languages", "Science", "Astronomy", "Biology", "Chemistry", "Geology", "Math", "MedicalSoftware", "Physics", "Teaching", "Amusement", "Applet", "Archiving", "Electronics", "Emulator", "Engineering", "FileManager", "Shell", "ScreenSaver", "TeminalEmulator", "TrayIcon", "System", "Filesystem", "Monitor", "Security", "Utility", "Accessibility", "Calculator", "Clock", "TextEditor", "KDE", "GNOME", "GTK", "Qt", "Motif", "Java", "ConsoleOnly" (found "Application") desktopfileinstall created an invalid desktop file! Unable to install the .desktop menu entry file. You must add it to your menus by hand. Trying to find a suitable vmmon module for your running kernel. None of the prebuilt vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] Using compiler "/usr/bin/gcc". Use environment variable CC to override. What is the location of the directory of C header files that match your running kernel? [/lib/modules/2.6.184686/build/include] Extracting the sources of the vmmon module. Building the vmmon module. Using 2.6.x kernel build system. make: Entering directory `/tmp/vmwareconfig0/vmmononly' make C /lib/modules/2.6.184686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory `/usr/src/linuxheaders2.6.184686' CC [M] /tmp/vmwareconfig0/vmmononly/linux/driver.o CC [M] /tmp/vmwareconfig0/vmmononly/linux/hostif.o CC [M] /tmp/vmwareconfig0/vmmononly/common/cpuid.o CC [M] /tmp/vmwareconfig0/vmmononly/common/hash.o CC [M] /tmp/vmwareconfig0/vmmononly/common/memtrack.o CC [M] /tmp/vmwareconfig0/vmmononly/common/phystrack.o CC [M] /tmp/vmwareconfig0/vmmononly/common/task.o CC [M] /tmp/vmwareconfig0/vmmononly/common/vmx86.o CC [M] /tmp/vmwareconfig0/vmmononly/vmcore/moduleloop.o LD [M] /tmp/vmwareconfig0/vmmononly/vmmon.o Building modules, stage 2. MODPOST CC /tmp/vmwareconfig0/vmmononly/vmmon.mod.o LD [M] /tmp/vmwareconfig0/vmmononly/vmmon.ko make[1]: Leaving directory `/usr/src/linuxheaders2.6.184686' cp f vmmon.ko ./../vmmon.o make: Leaving directory `/tmp/vmwareconfig0/vmmononly' The module loads perfectly in the running kernel. Do you want networking for your virtual machines? (yes/no/help) [yes] Configuring a bridged network for vmnet0. The following bridged networks have been defined:


. vmnet0 is bridged to eth0 All your ethernet interfaces are already bridged. Do you want to be able to use NAT networking in your virtual machines? (yes/no) [yes] Configuring a NAT network for vmnet8. Do you want this program to probe for an unused private subnet? (yes/no/help) [yes] Probing for an unused private subnet (this can take some time)... The subnet 192.168.207.0/255.255.255.0 appears to be unused. The following NAT networks have been defined: . vmnet8 is a NAT network on private subnet 192.168.207.0. Do you wish to configure another NAT network? (yes/no) [no] Do you want to be able to use hostonly networking in your virtual machines? [yes] Configuring a hostonly network for vmnet1. Do you want this program to probe for an unused private subnet? (yes/no/help) [yes] Probing for an unused private subnet (this can take some time)... The subnet 192.168.8.0/255.255.255.0 appears to be unused. The following hostonly networks have been defined: . vmnet1 is a hostonly network on private subnet 192.168.8.0. Do you wish to configure another hostonly network? (yes/no) [no] Extracting the sources of the vmnet module. Building the vmnet module. Using 2.6.x kernel build system. make: Entering directory `/tmp/vmwareconfig0/vmnetonly' make C /lib/modules/2.6.184686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory `/usr/src/linuxheaders2.6.184686' CC [M] /tmp/vmwareconfig0/vmnetonly/driver.o CC [M] /tmp/vmwareconfig0/vmnetonly/hub.o CC [M] /tmp/vmwareconfig0/vmnetonly/userif.o CC [M] /tmp/vmwareconfig0/vmnetonly/netif.o CC [M] /tmp/vmwareconfig0/vmnetonly/bridge.o CC [M] /tmp/vmwareconfig0/vmnetonly/procfs.o


CC [M] /tmp/vmwareconfig0/vmnetonly/smac_compat.o SHIPPED /tmp/vmwareconfig0/vmnetonly/smac_linux.x386.o LD [M] /tmp/vmwareconfig0/vmnetonly/vmnet.o Building modules, stage 2. MODPOST CC /tmp/vmwareconfig0/vmnetonly/vmnet.mod.o LD [M] /tmp/vmwareconfig0/vmnetonly/vmnet.ko make[1]: Leaving directory `/usr/src/linuxheaders2.6.184686' cp f vmnet.ko ./../vmnet.o make: Leaving directory `/tmp/vmwareconfig0/vmnetonly' The module loads perfectly in the running kernel. Please specify a port for remote console connections to use [902] Configuring the VMware VmPerl Scripting API. Building the VMware VmPerl Scripting API. Using compiler "/usr/bin/gcc". Use environment variable CC to override. Installing the VMware VmPerl Scripting API. The installation of the VMware VmPerl Scripting API succeeded. Generating SSL Server Certificate In which directory do you want to keep your virtual machine files? [/var/lib/vmware/Virtual Machines] The path "/var/lib/vmware/Virtual Machines" does not exist currently. This program is going to create it, including needed parent directories. Is this what you want? [yes] Please enter your 20character serial number. Type XXXXXXXXXXXXXXXXXXXX or 'Enter' to cancel: 9AW0DY2U492C53H413H9 Starting VMware services: Virtual machine monitor done Virtual ethernet done Bridged networking on /dev/vmnet0 done Hostonly networking on /dev/vmnet1 (background) done Hostonly networking on /dev/vmnet8 (background) done NAT service on /dev/vmnet8 done The configuration of VMware Server 1.0.3 build44356 for Linux for this running kernel completed successfully.

4. Menjalankan vmware Berikut langkah-langkah menjalan vmware. Klik icon Vmware dari: Menu -> Applications -> System Tools -> Vmware Server Console. Pada tutorial dibuat contoh membuat virtual machine Sistem Operasi Ubuntu 7.04.


Gambar 1.a: Tampilan menjalankan Vmware server console


Gambar 1.b: Tampilan awal vmware server console Default instalasi vmware server pada gambar 1 diatas akan memilihkan kita untuk membuat koneksi ke localhost. Sebenarnya ada pilihan lain yaitu remote host. Pilihan kedua ini digunakan apabila anda ingin terhubung pada vmware server pada komputer lain.


Gambar 2: Tampilan setelah berhasil login


Gambar 3: Langkah membuat Virtual Machine


Gambar 4: Memlih konfigurasi Virtual Machine


Gambar 5: Memilih sistem operasi tamu


Gambar 6: Mengisikan nama virtual machine


Gambar 7: Memilih tipe jaringan


Gambar 8: menentukan ukuran harddisk


Gambar 9: Setting Virtual Machine Selesai Setelah proses pembuatan vmware machine selesai, silakan anda klik power on dan masukkan CD/DVD instalasi Ubuntu 7.04. Proses instalasi itu dilakukan seperti anda menginstall sistem operasi pada komputer dengan harddisk yang masih kosong. Anda juga bisa melakukan hal yang sama seperti menginstall Windows XP, Vista, Fedora, FreeBSD dan sistem operasi lainnya. Yang membedakan hanyalah pada saat memlilih sistem operasi tamu (Guest OS).


Gambar 10: Contoh virtual machine Ubuntu 7.04 yang dijalankan pada vmware Pada gambar 10 diatas adalah sistem operasi Ubuntu Desktop 7.04 yang dijalankan dari vmware console. Anda dapat menjalan sistem operasi yang diinginkan secara cepat dan mudah. 5. Links ● ● ● ●

www.debian.org www.vmware.com www.howtoforge.com kambing.ui.edu/debian/


Langkah-langkah instalasi vmware pada Debian 4.0 (Etch)

Recommend Documents