®
DOPORUČENÝ
PRODEJNÍ CENÍK PLATNÝ OD 1. 4. 2011
Změny a chyby vyhrazeny
HL Hutterer & Lechner GmbH
2325 Himberg, Brauhausgasse 3-5, Austria Tel.0043/(0)2235/86291-0, FaxDW 31 od. 52 Servicehotline 0043/(0)2235/87748 http://www.hutterer-lechner.com e-mail:
[email protected] Vyhledávač pro skladby plochých střech http://www.hl.blucina.net
Informační kancelář ING. J. MAŇAS TOM ZELENÝ Tel./fax: +420 548 530 993 Zámečnické nám. 54/6, 664 51 Šlapanice Tel./Fax: 545 223 420 GSM: +420 724 024 657 e-mail:
[email protected] e-mail:
[email protected]
HL225 (.1)/90 HL222/1 (/90) HL224 (.1)
HL512 HL514/SN HL522N HL524
HL135
HL300 (G) (R)
HL310N (G) (Pr) (R) (-3000) (3120...3125)
HL Haus A4 2C.indd 1
HL600 (/2) HL660/2 HL601
HL400 HL400ECO HL404 (.1) HL405 (E) HL405ECO HL406 (.2) (E) HL410 HL440
HL80.2 (H) (C) HL83 (.H) (.M) (.P)
(-3000) (3120...3125)
HL523 HL510NC HL80.1 (H) (R) (C) HL510N (G) (PR) (R)
HL200 HL201
HL900N HL900NECO
HL430 (E) HL431 (E) HL432 (E) HL1110 HL1145
HL70 (G) (R)
HL134 (.0) (.2) HL134.1C (K)
HL3100 (Pr)
HL555N HL560N
HL22 HL23 HL24 (U) HL25U HL26 HL27 HL28 HL100 (G) HL126 HL126.2
HL90 HL90.2 HL310N.2
HL710 (.0) (.1) (.2) (.2EPC) HL712 (.0) (.1) (.2) (.2EPC) HL715 (.0) (.1) (.2) (.2EPC) HL720 (.0) (.1) (.2)
HL80 (H) (R) (C) HL81G (H) HL83 (.H) (.M) (.P)
HL510NC HL510N (G) (Pr) (R) (-3000) (3120...3125)
HL203 HL204 HL205 HL209 HL210 HL210.7 HL224
HL15.1 HL34 HL35 (.0) HL133 HL135 HL137
HL902 (T) HL904 (T)
HL9..
HL805 HL807 HL810
HL64 (.1) (B) (H) HL62 (.1) (B) (H) HL63 (.1) (H)
HL830 HL840 HL850 HL860
HL616H
HL616
HL606
HL605
Wassergeruchs- Aufstockelement Aufstockelement Gussrahmen verschluss Kunststoffrahmen
Entwässerungsring
Geruchsklappe
Gussrost
Kunststoffrost
Edelstahlrost
Aufstockelement Hulbit
Dichtgarnitur
HL615
23.01.2006 14:39:49
Aufstockelement Aufstock- Heizset Befesti- Laubfangmit Flansch element gungskrallen korb
HL615H
Großabläufe perfekt kombiniert
HL System PERFEKT
HL69 (H)
HL FIRE PROTECTION
®
Odpady, sifony HL2
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Dvojitá přípojka pro pračky a myčky se zpětnými armaturami z obou směrů připojení. Vhodná pro HL100, HL400(ECO), HL405(6)(ECO), HL410..atd. HL2 HL2.0
. ...............................................................................................................................................................................................................508,- Jako HL2, ale s plochým těsněním.............................................................................................................................................508,-
609,- s DPH 609,- s DPH
Náhradní díly HL01000D Ploché těsnění k HL2.0 HL01050D O-kroužek 18x2,5mm
HL2.1
12,21,-
15,- s DPH 25,- s DPH
HL02.3E HL19
Zpětná klapka kompletní 123,Kolenová přípojka 1” x připojení hadice 3/4” 106,-
147,- s DPH 127,- s DPH
Dvojitá přípojka pro pračky a myčky se zpětnou armaturou a přivzdušňovacím ventilem. Vhodná pro HL400, HL405(6), HL410 HL2.1
. ............................................................................................................................................................................................................... 870,- 1044,- s DPH
Náhradní díly HL01050D O-kroužek 18x2,5mm HL02.3E Zpětná klapka
HL3
21,123,-
25,- s DPH 147,- s DPH
HL19 HL902
Kolenová přípojka 1” x připojení hadice 3/4” 106,Kanalizační přivzdušňovací ventil 1” 453,-
127,- s DPH 544,- s DPH
Zpětný uzávěr pro myčku nádobí 1” HL3
3/4” připojení hadice (17 - 23 mm)..............................................................................................................................................367,-
440,- s DPH
Náhradní díly HL01000D Ploché těsnění 1”
HL4
12,-
15,- s DPH
Zpětná armatura DN50 s víčkem pro kontrolu a čištění do ležatého nebo svislého potrubí. Pro použití výlučně nad hladinou zpětného vzdutí !!! HL4
. .............................................................................................................................................................................................................1358,- 1629,- s DPH
Náhradní díly HL01062D Břitové těsnění DN50 HL01071D Klingerové těsnění 5/4” 30x39x2mm
HL4/7
21,12,-
25,- s DPH 15,- s DPH
HL04.0E Čistící matice 5/4” HL01017D O-kroužek těsnění DN 50
44,21,-
53,- s DPH 25,- s DPH
Zpětná armatura DN75 s víčkem pro kontrolu a čištění do ležatého nebo svislého potrubí. Pro použití výlučně nad hladinou zpětného vzdutí !!! HL4/7
. .............................................................................................................................................................................................................1801,- 2162,- s DPH
Náhradní díly HL01063D Břitové těsnění DN 75 HL01071D Klingerové těsnění 5/4” 30x39x2mm
HL5
33,12,-
40,- s DPH 15,- s DPH
HL04.0E
Čistící matice 5/4”
44,-
53,- s DPH
Mosazné hrdlo s O-kroužkem určené pro pájení (na potrubí z olova) HL5/30 HL5/40 HL5/50
DN 32.................................................................................................................................................................................................... 184,- DN 40.................................................................................................................................................................................................... 184,- DN 50.................................................................................................................................................................................................... 184,-
221,- s DPH 221,- s DPH 221,- s DPH
Náhradní díly HL01049D O-kroužek těsnění DN 32 HL01016D O-kroužek těsnění DN 40
HL6
12,12,-
15,- s DPH 15,- s DPH
HL01017D O-kroužek těsnění DN 50
21,-
25,- s DPH
Dvojitá přípojka se 2 přípojkami na hadici HL19 HL6
. ............................................................................................................................................................................................................... 255,-
307,- s DPH
Náhradní díly HL19.0
HL7.WE
Kolenová přípojka 1” x připojení hadice 3/4” (17-23mm) s plochým těsněním 106,- 127,- s DPH
Krycí růžice k záchodové míse, dělená, bílá HL7.WE
HL7EL
337,- s DPH
Krycí růžice k záchodové míse elastická, bílá nebo barevná HL7EL.WE
HL7EL/90
DN 110.................................................................................................................................................................................................. 281,-
DN 110 bílá...........................................................................................................................................................................................141,-
169,- s DPH
Krycí růžice k záchodové míse elastická, bílá nebo barevná HL7EL/90WE ø90 bílá.................................................................................................................................................................................................141,-
169,- s DPH
3
®
Odpady, sifony HL8EL
Ceny jsou uvedeny v Kč
Krycí růžice elastická pro zápachové uzávěrky HL8EL/30 HL8EL/40 HL8EL/50
HL9
HL Hutterer & Lechner GmbH
DN 32.......................................................................................................................................................................................................91,- DN 40.......................................................................................................................................................................................................91,- DN 50.......................................................................................................................................................................................................91,-
109,- s DPH 109,- s DPH 109,- s DPH
Přechodový kus z plastových trub na litinové (bez hrdel), nebo olověné trouby HL9/50 HL9/7 HL9/1 HL9/50/1 HL9/7/1
DN 50.................................................................................................................................................................................................... 399,- DN 75....................................................................................................................................................................................................504,- DN 110..................................................................................................................................................................................................634,- DN 50/110............................................................................................................................................................................................634,- DN 75/110............................................................................................................................................................................................634,-
478,- s DPH 604,- s DPH 761,- s DPH 761,- s DPH 761,- s DPH
Náhradní díly HL01029D Pryžové lamelové těsnění k HL9/1 HL01027D Pryžové lamelové těsnění k HL9/50 HL01028D Pryžové lamelové těsnění k HL9/7
HL9ET
324,196,253,-
389,- s DPH 235,- s DPH 304,- s DPH
HL01064D Břitové těsnění DN 110 HL01062D Břitové těsnění DN 50 HL01063D Břitové těsnění DN 75
44,21,33,-
53,- s DPH 25,- s DPH 40,- s DPH
Přechodový kus jako HL9, avšak z plastových trub na vláknocementová potrubí (eternit) HL9/50ET HL9/7ET HL9/1ET HL9/50/1ET HL9/7/1ET
DN 50.................................................................................................................................................................................................... 399,- DN 75....................................................................................................................................................................................................504,- DN 110..................................................................................................................................................................................................634,- DN 50/110............................................................................................................................................................................................634,- DN 75/110............................................................................................................................................................................................634,-
478,- s DPH 604,- s DPH 761,- s DPH 761,- s DPH 761,- s DPH
Náhradní díly HL01064D HL01062D HL01063D HL01083D
HL10
Břitové těsnění DN 110 Břitové těsnění DN 50 Břitové těsnění DN 75 O-kroužek provazový 109x7mm(HL9/1ET)
44,21,33,33,-
53,- s DPH 25,- s DPH 40,- s DPH 40,- s DPH
HL01085D O-kroužek provazový 60x7mm(HL9/50ET) (HL9/1/50ET) HL01084D O-kroužek provazový 74x7mm(HL9/7ET) (HL9/7/50ET)
25,-
30,- s DPH
29,-
35,- s DPH
Prodlužovací trubka HL10/40 HL10/50
DN 40.....................................................................................................................................................................................................241,- DN 50.....................................................................................................................................................................................................241,-
289,- s DPH 289,- s DPH
Náhradní díly HL01008D Klínové těsnění T 40 bílé HL01009D Klínové těsnění T 50 bílé
HL11
21,21,-
25,- s DPH 25,- s DPH
HL01047D Převlečná matice 6/4” HL01048D Převlečná matice 2”
58,76,-
69,- s DPH 91,- s DPH
Prodlužovací koleno HL11/40 HL11/50
DN 40.....................................................................................................................................................................................................241,- DN 50.....................................................................................................................................................................................................241,-
289,- s DPH 289,- s DPH
Náhradní díly HL01008D Klínové těsnění T 40 bílé HL01009D Klínové těsnění T 50 bílé
HL12
21,21,-
25,- s DPH 25,- s DPH
HL01047D Převlečná matice 6/4” HL01048D Převlečná matice 2”
58,76,-
69,- s DPH 91,- s DPH
Redukce -prodloužení závitových spojů HL12.1 HL12.2 HL12.3 HL12.4
5/4” x 6/4”.............................................................................................................................................................................................. 80,- 6/4 x 6/4”................................................................................................................................................................................................ 80,- 6/4” x 5/4”.............................................................................................................................................................................................. 80,- 2” x 6/4”.................................................................................................................................................................................................. 80,-
96,- s DPH 96,- s DPH 96,- s DPH 96,- s DPH
Náhradní díly HL01001D Ploché těsnění 5/4” HL01002D Ploché těsnění 6/4”
HL13
12,12,-
15,- s DPH 15,- s DPH
HL01003D Ploché těsnění 2” HL01072D Klingerové ploché těsnění
12,12,-
15,- s DPH 15,- s DPH
Zásuvná trubka s přípojkou pro spotřebiče se zpětným uzávěrem HL13/30-5/4 . ................................................................................................................................................................................................................197,- HL13/40-6/4 . ................................................................................................................................................................................................................197,- HL13/50-6/4 . ................................................................................................................................................................................................................197,-
236,- s DPH 236,- s DPH 236,- s DPH
Náhradní díly HL01001D Ploché těsnění 5/4” HL01002D Ploché těsnění 6/4”
HL13G
12,12,-
15,- s DPH 15,- s DPH
HL02.3E HL19
Zpětná klapka komplet 123,Kolenová přípojka 1” x připojení hadice 3/4” 106,-
147,- s DPH 127,- s DPH
Zásuvná trubka HL13G/30-5/4 . ................................................................................................................................................................................................................141,- HL13G/40-6/4 . ................................................................................................................................................................................................................141,- HL13G/50-6/4 . ................................................................................................................................................................................................................141,-
169,- s DPH 169,- s DPH 169,- s DPH
Náhradní díly HL01001D Ploché těsnění 5/4” HL01002D Ploché těsnění 6/4”
4
12,12,-
15,- s DPH 15,- s DPH
HL01046D Převlečná matice 5/4” HL01047D Převlečná matice 6/4”
58,58,-
69,- s DPH 69,- s DPH
®
Odpady, sifony HL13-2/40
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Zásuvná trubka se 2 přípojkama pro pračku nebo myčku nádobí HL13-2/40
DN 40.................................................................................................................................................................................................... 291,-
350,- s DPH
Náhradní díly HL01002D Ploché těsnění 6/4” HL19.0 Kolenová přípojka 1” x připojení hadice 3/4” s plochým těsněním
HL14/90
12,-
15,- s DPH
106,-
127,- s DPH
Odpadní ventil se sítkem pro dřezy s otvorem ø90 mm, připojovací závit 6/4” HL14/90
DN 40.................................................................................................................................................................................................... 422,-
507,- s DPH
Náhradní díly HL014/90.1E Ventilová zátka (košík) HL014/90.2E Talířek ventilu Ø113 mm HL014/90.3E Šroub HL014/90.4E Těleso ventilu Ø112mm x 6/4” HL01094D Těsnění 108x91mm
HL15
133,141,47,110,48,-
159,- s DPH 169,- s DPH 57,- s DPH 132,- s DPH 58,- s DPH
Odpadní ventil, připojovací závit 6/4” HL15-5/4 HL15-6/4
. ...............................................................................................................................................................................................................236,- . ...............................................................................................................................................................................................................236,-
283,- s DPH 283,- s DPH
Náhradní díly HL01039D HL01040D HL01042D HL01043D
HL15.1
Talířek ventilu 5/4” Talířek ventilu 6/4” Šroubek k ventilu M6 x 25mm Zátka 5/4” s kroužkem
103,103,21,85,-
124,- s DPH 124,- s DPH 25,- s DPH 103,- s DPH
HL01044D Zátka 6/4” s kroužkem HL01053D Těsnění k ventilu 78x49mm HL015.1E Tělo ventilu
85,48,114,-
103,- s DPH 58,- s DPH 137,- s DPH
Odpadní ventil 5/4” pro umyvadla, šroub 60 mm HL15.1
. ...............................................................................................................................................................................................................204,-
245,- s DPH
Náhradní díly HL01017D O-kroužek DN50 HL01039D Talířek ventilu 5/4” HL015.1.1E Tělo ventilu
HL15U
21,103,114,-
25,- s DPH 124,- s DPH 137,- s DPH
HL015.1.2E Zátka 5/4” s řetízkem 48cm a s přípevněním HL015.5E Zátka 5/4” HL0514.10E Šroubek k ventiluM6x60mm poniklovaný
198,85,65,-
237,- s DPH 103,- s DPH 78,- s DPH
Odpadní ventil s přepadem a zátkou (k HL100), připojovací závit 6/4” HL15U-5/4 HL15U-6/4
. ............................................................................................................................................................................................................... 518,- . ............................................................................................................................................................................................................... 518,-
622,- s DPH 622,- s DPH
Náhradní díly HL015U.5E Tělo ventilu 5/4”komplet HL015U.0E Tělo ventilu 6/4”komplet HL01039D Talířek ventilu 5/4” HL01040D Talířek ventilu 6/4” HL01042D Šroubek k ventilu M6 x 25mm HL01053D Těsnění k ventilu 78x49mm HL01065D Zátka 6/4” s řetízkem 21cm a s připevněním
HL16
553,310,103,103,21,48,164,-
664,- s DPH 372,- s DPH 124,- s DPH 124,- s DPH 25,- s DPH 58,- s DPH 197,- s DPH
HL01066D Zátka 5/4” s řetízkem 21cm a s připevněním HL015U.1E Těleso ventilu s připojovacím závitem 6/4” HL015U.2E Přepadová trubka komplet HL01008D Klínové těsnění T 40 bílé HL01047D Převlečná matice 6/4” HL015U.3E Horní díl přepadu komplet HL01015D Těsnění k přepadu pravoúhlé 67x45mm
164,243,277,21,58,147,52,-
197,- s DPH 292,- s DPH 332,- s DPH 25,- s DPH 69,- s DPH 177,- s DPH 62,- s DPH
Odtokové koleno pro koupací vany 6/4” x DN 40 HL16
. ................................................................................................................................................................................................................197,-
236,- s DPH
Náhradní díly HL01002D Ploché těsnění 6/4”
HL16.1
12,-
15,- s DPH
Odtokové koleno pro sprchové mísy s odpadním ventilem 6/4” HL16.1
. ............................................................................................................................................................................................................... 291,-
350,- s DPH
Náhradní díly HL01040D Talířek ventilu 6/4” HL01042D Šroubek k ventilu M6 x 25mm HL01044D Zátka 6/4” s kroužkem
103,21,85,-
124,- s DPH 25,- s DPH 103,- s DPH
HL01053D Těsnění k ventilu 78x49mm HL024.3E Rameno DN40 s kalichem ventilu
48,164,-
58,- s DPH 197,- s DPH
5
®
Odpady, sifony HL17
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Universální přípojka na odtokovou hadici, 6/4” x DN 40 - připojení hadice 3/4” HL17
. ................................................................................................................................................................................................................327,-
392,- s DPH
Náhradní díly HL01002D Ploché těsnění 6/4”
HL18
12,-
15,- s DPH
Universální kolenová přípojka na odtokovou hadici, 6/4” x připojení hadice 3/4” HL18
. ................................................................................................................................................................................................................307,-
368,- s DPH
Náhradní díly HL01002D Ploché těsnění 6/4”
HL19
12,-
15,- s DPH
Kolenová přípojka na odtokovou hadici pro pračku nebo myčku 1” x připojení hadice 3/4”, bílá HL19 HL19.C HL19.0 HL19.2 HL19.G HL19.1
. ...............................................................................................................................................................................................................106,- jako HL19 avšak chromované...................................................................................................................................................... 162,- jako HL19, ale s plochým těsněním...........................................................................................................................................106,- jako HL19, ale s připojením hadice 8 – 13 mm.......................................................................................................................106,- jako HL19, ale v šedé barvě...........................................................................................................................................................106,- pryžová manžeta DN40xDN32...................................................................................................................................................100,-
127,- s DPH 194,- s DPH 127,- s DPH 127,- s DPH 127,- s DPH 120,- s DPH
Náhradní díly HL01050D O-kroužek 18x2,5mm HL0400.7E Těsnící zátka
HL19T
21,21,-
25,- s DPH 25,- s DPH
HL01000D Ploché těsnění 1” (k HL19.0)
12,-
15,- s DPH
Tvarovka T, DN 32 a DN 40 s kolenovou přípojkou na odtokovou hadici pro pračku nebo myčku nádobí HL19T/30 HL19T/40
DN 32....................................................................................................................................................................................................408,- DN 40....................................................................................................................................................................................................408,-
489,- s DPH 489,- s DPH
Náhradní díly HL01007D HL01008D HL01046D HL01047D
HL19T.2
Klínové těsnění T 30 bílé Klínové těsnění T 40 bílé Převlečná matice 5/4” Převlečná matice 6/4”
21,21,58,58,-
25,- s DPH 25,- s DPH 69,- s DPH 69,- s DPH
HL0902.1E T - tvarovka DN 32x5/4”se závitem 1” 306,HL0902.2E T - tvarovka DN 40x6/4”se závitem 1” 306,HL19 Kolenová přípojka 1” x připojení hadice 3/4” 106,-
367,- s DPH 367,- s DPH 127,- s DPH
Tvarovka T, DN 32 a DN 40 s s kolenovou přípojkou na odtokovou hadici 8-13mm HL19T.2/30 HL19T.2/40
DN 32....................................................................................................................................................................................................408,- DN 40....................................................................................................................................................................................................408,-
489,- s DPH 489,- s DPH
Náhradní díly HL01007D HL01008D HL01046D HL01047D
HL20
Klínové těsnění T 30 bílé Klínové těsnění T 40 bílé Převlečná matice 5/4” Převlečná matice 6/4”
HL0902.1E T - tvarovka DN 32x5/4”se závitem 1” HL0902.2E T - tvarovka DN 40x6/4”se závitem 1” HL19.2 Kolenová přípojka 1” x připojení hadice 8-13 mm
306,306,-
367,- s DPH 367,- s DPH
106,-
127,- s DPH
. ...............................................................................................................................................................................................................443,-
531,- s DPH
Kalich pro úkapy se zápachovou uzávěrkou a s přídavným uzávěrem (kuličkou) proti zápachu pro suchý stav HL21
HL22
25,- s DPH 25,- s DPH 69,- s DPH 69,- s DPH
Kalich pro úkapy 6/4” s fixační objímkou - vhodný k HL100(G) HL20
HL21
21,21,58,58,-
DN 32.....................................................................................................................................................................................................415,-
498,- s DPH
Odpadní souprava 6/4” HL22
DN 40.................................................................................................................................................................................................... 493,-
592,- s DPH
Náhradní díly HL022.1E T-tvarovka DN40x6/4” HL01008D Klínové těsnění T 40 bílé
6
234,21,-
281,- s DPH 25,- s DPH
HL01047D Převlečná matice 6/4” HL16 Odtokové koleno DN40x6/4”
58,197,-
69,- s DPH 236,- s DPH
®
Odpady, sifony HL23
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Odpadní souprava 6/4” HL23
DN 40.....................................................................................................................................................................................................277,-
332,- s DPH
Náhradní díly HL022.1E T-tvarovka DN40x6/4” HL01002D Ploché těsnění 6/4” HL01008D Klínové těsnění T 40 bílé
HL24
234,12,21,-
281,- s DPH 15,- s DPH 25,- s DPH
HL01047D Převlečná matice 6/4” HL16 Odtokové koleno DN40x6/4”
58,197,-
69,- s DPH 236,- s DPH
Odpadní souprava 6/4”s odpadními ventily 6/4” nebo 5/4” HL24/40-5/4 . ...............................................................................................................................................................................................................642,- HL24/40-6/4 . ...............................................................................................................................................................................................................642,-
770,- s DPH 770,- s DPH
Náhradní díly HL024.7E HL024.2E HL024.6E HL024.4E HL01008D HL01039D HL01040D
HL24U
Těleso ventilu 5/4” kompletní Těleso ventilu 6/4” kompletní Rameno odtoku DN40x5/4” kompletní Rameno odtoku DN40x6/4” kompletní Klínové těsnění T 40 bílé Talířek ventilu 5/4” Talířek ventilu 6/4”
447,447,397,397,21,103,103,-
536,- s DPH 536,- s DPH 476,- s DPH 476,- s DPH 25,- s DPH 124,- s DPH 124,- s DPH
HL01042D HL01043D HL01044D HL01047D HL01053D HL024.3E
Šroubek k ventilu M6 x 25mm Zátka 5/4” s kroužkem Zátka 6/4” s kroužkem Převlečná matice 6/4” Těsnění k ventilu 78x49mm Rameno odtoku DN40 s kalichem ventilu
21,85,85,58,48,164,-
25,- s DPH 103,- s DPH 103,- s DPH 69,- s DPH 58,- s DPH 197,- s DPH
Odpadní souprava 6/4” s odpadními ventily 6/4” nebo 5/4” a přepadem HL24U/40-5/4 DN 40 x 5/4”........................................................................................................................................................................................905,- 1086,- s DPH HL24U/40-6/4 DN 40 x 6/4”........................................................................................................................................................................................905,- 1086,- s DPH Náhradní díly HL015U.2E Přepadová trubka komplet HL01008D Klínové těsnění T 40 HL01047D Převlečná matice 6/4” HL015U.3E Horní díl přepadu komplet HL01015D Těsnění k přepadu pravoúhlé 67x45mm HL024.6E Rameno odtoku DN40x5/4” kompletní HL024.4E Rameno odtoku DN40x6/4” kompletní HL01008D Klínové těsnění T 40 bílé HL01039D Talířek ventilu 5/4” HL01040D Talířek ventilu 6/4” HL01042D Šroubek k ventilu M6 x 25mm HL01047D Převlečná matice 6/4”
HL25U
277,21,58,147,52,397,397,21,103,103,21,58,-
332,- s DPH 25,- s DPH 69,- s DPH 177,- s DPH 62,- s DPH 476,- s DPH 476,- s DPH 25,- s DPH 124,- s DPH 124,- s DPH 25,- s DPH 69,- s DPH
HL01053D Těsnění k ventilu 78x49mm HL01065D Zátka 6/4” s řetízkem 21cm a s připevněním HL01066D Zátka 5/4” s řetízkem 21cm a s připevněním HL015.5E Zátka 5/4” HL015.6E Zátka 6/4” HL024.3E Rameno odtoku DN40 s kalichem ventilu HL024.4E Rameno komplet 6/4” HL024U.7E Ventil 5/4”s odbočkou kompletní HL024U.8E Ventil 6/4”s odbočkou kompletní HL024U.1E Ventil s odbočkou 2xDN40 s připojením závitu 6/4”
48,164,164,85,85,164,397,620,620,-
58,- s DPH 197,- s DPH 197,- s DPH 103,- s DPH 103,- s DPH 197,- s DPH 476,- s DPH 744,- s DPH 744,- s DPH
281,-
337,- s DPH
Odpadní souprava pro atypické dvoudílné dřezy 6/4” s odpadními ventily 6/4” nebo 5/4” a přepadem HL25U/40-5/4 DN 40 x 5/4”......................................................................................................................................................................................1438,- 1725,- s DPH HL25U/40-6/4 DN 40 x 6/4”......................................................................................................................................................................................1438,- 1725,- s DPH Náhradní díly HL01007D HL01010D HL01039D HL01040D HL01042D HL01043D HL01044D HL01046D HL01065D HL01066D
HL26
Klínové těsnění T 30 Těsnění ventilu D104 Talířek ventilu 5/4” Talířek ventilu 6/4” Šroubek k ventilu M6 x 25mm Zátka 5/4” s kroužkem Zátka 6/4” s kroužkem Převlečná matice 5/4” Zátka 6/4” s řetízkem 21cm a s připevněním Zátka 5/4” s řetízkem 21cm a s připevněním
21,48,103,103,21,85,85,58,164,164,-
25,- s DPH 58,- s DPH 124,- s DPH 124,- s DPH 25,- s DPH 103,- s DPH 103,- s DPH 69,- s DPH 197,- s DPH 197,- s DPH
HL025U.1E T-kus DN40x6/4” HL01008D Klínové těsnění T 40 bílé HL01047D Převlečná matice 6/4” HL025U.2E Koleno DN40x6/4” HL025U.3E Rameno odtoku DN40 s kalichem ventilu HL025U.5E Těleso ventilu s přojovacím závitem 6/4” HL025U.6E Přepad komplet HL01015D Těsnění k přepadu pravoúhlé 67x45mm HL16 Odtokové koleno pro koupací vany 6/4” x DN 40
196,21,58,185,164,243,153,52,-
235,- s DPH 25,- s DPH 69,- s DPH 222,- s DPH 197,- s DPH 292,- s DPH 184,- s DPH 62,- s DPH
197,-
236,- s DPH
Prostorové rameno DN 40 x 6/4”, prostorový spoj HL26
DN 40.....................................................................................................................................................................................................277,-
332,- s DPH
Náhradní díly HL0126.1E Rameno DN40x6/4” HL01002D Ploché těsnění 6/4” HL025U.2E Koleno
HL27
164,12,185,-
197,- s DPH 15,- s DPH 222,- s DPH
HL01008D Klínové těsnění T 40 bílé HL01047D Převlečná matice 6/4”
21,58,-
25,- s DPH 69,- s DPH
Odpadní souprava 6/4” pro dvojdřezy HL27
DN 40.................................................................................................................................................................................................... 729,-
875,- s DPH
Náhradní díly HL022.1E T-tvarovka DN40x6/4” HL01008D Klínové těsnění T 40 HL01047D Převlečná matice 6/4”
HL28
234,21,58,-
281,- s DPH 25,- s DPH 69,- s DPH
HL11/40 HL16
Prodlužovací koleno DN 40 Odtokové koleno DN 40 x 6/4”
241,197,-
289,- s DPH 236,- s DPH
Odpadní souprava 6/4” HL28
DN 40................................................................................................................................................................................................... 1117,- 1340,- s DPH
Náhradní díly HL028.1E Křížový kus DN40x6/4” HL01008D Klínové těsnění T 40 HL01047D Převlečná matice 6/4”
281,21,58,-
337,- s DPH 25,- s DPH 69,- s DPH
HL11/40 HL16
Prodlužovací koleno DN 40 Odtokové koleno DN 40 x 6/4”
241,197,-
289,- s DPH 236,- s DPH
7
®
Odpady, sifony HL30
Ceny jsou uvedeny v Kč
Univerzální přechodový kus na beztlakové (úkapové) odtokové potrubí DN 32 (vhodné k HL136N) HL30.2 HL30.3
HL34
HL Hutterer & Lechner GmbH
Přechodový kus DN 32 x R 1/2”...................................................................................................................................................348,- Přechodový kus DN 32 x R 3/4”...................................................................................................................................................348,-
418,- s DPH 418,- s DPH
Napojovací koleno pro připojení zápachových uzávěrek možnost zkrácení přítokové trubky, zásuvné těsnění pro DN 32 a DN 40 HL34
DN 40/50.............................................................................................................................................................................................. 201,-
241,- s DPH
Náhradní díly HL01054D Manžeta 48x26mm
HL35
95,-
114,- s DPH
HL034.1E Stavební zátka
25,-
30,- s DPH
Souprava pro připojení umyvadla nebo bidetu Skladba: HL34, HL44, HL42B, HL42R, 2 x mosazná nástěnka 1/2” HL35
DN 40/50............................................................................................................................................................................................1660,- 1992,- s DPH
Náhradní díly HL0405.3E Mosazná nástěnka 1/2” x 1/2” 441,HL34 Koleno pro připojení zápachových uzávěrek 201,HL42.B Ochranná zátka 1/2” modrá 49,-
HL35.0
529,- s DPH 241,- s DPH 59,- s DPH
HL42.R HL44
Ochranná zátka 1/2” červená Montážní deska s otvory
49,272,-
59,- s DPH 326,- s DPH
Souprava pro připojení umyvadla nebo bidetu Skladba: HL34, HL44 HL35.0
DN 40/50.............................................................................................................................................................................................. 472,-
566,- s DPH
Náhradní díly HL34
HL36N
Koleno pro připojení zápachových uzávěrek 201,-
241,- s DPH
HL44
Montážní deska s otvory
272,-
326,- s DPH
Plastový nástavec ø110 mm s plastovým rámem 100 x 100 mm a s vtokovou mřížkou z nerezové oceli 94x94 mm, třída zatížení K3 (300 kg). Vhodný pro tělesa vtoků HL 70K, HL 80K, HL 90K, HL 300K a HL 304K HL36N
. ...............................................................................................................................................................................................................545,-
654,- s DPH
Náhradní díly HL080.1E Vtoková mřížka z nerezové oceli 94x94 mm HL080.2EN Nástavec ø110 mm/92mm/100x100mm s O-kroužkem
HL37F
486,-
583,- s DPH
230,-
275,- s DPH
HL01067D O-kroužek 92x4 mm HL090.3E Sítko k HL36N
25,79,-
30,- s DPH 95,- s DPH
Plastový nástavec ø110 mms plastovým rámem 123 x 123 mm a s vtokovou mřížkou PRIMUS z nerezové oceli 115x115 mm, třída zatížení K3 (300 kg). Vhodný pro tělesa vtoků HL 70K, HL 80K, HL 90K, HL 300K, HL 304K, HL 310NK a HL 510 NK HL37F HL37FPr HL37F-3000
s mřížkou Primus.............................................................................................................................................................................. 532,- 638,- s DPH se zápachovou uzávěrkou PRIMUS 30mm a mřížkou Primus.........................................................................................905,- 1086,- s DPH s mřížkou Primus a nerezovým rámem................................................................................................................................. 1019,- 1223,- s DPH
Náhradní díly HL037Pr.1E Vtoková mřížka PRIMUS z nerezové oceli 115x115mm HL037N.2E Nástavec ø110mm/90/123x123mm s O-kroužkem HL01067D O-kroužek 92x4 mm
HL37NP
335,-
402,- s DPH
179,25,-
215,- s DPH 30,- s DPH
HL037N.0E Stavební krytka 123x123 HL2090 Zápachový uzávěr ”Primus” - 30 mm HL3200 Nástavec s nerezovým rámem V4A 121x121mm
29,380,-
35,- s DPH 456,- s DPH
742,-
890,- s DPH
Plastový nástavec ø110mm se sníženým vnějším rámem z PVC pro napojení podlahových krytin (hydroizolací) z PVC nalepením, se vtokovou mřížkou z nerezové oceli 115 x 115mm, třída zatížení K3 (300kg). Vhodný pro tělesa vtoků např: HL70K, HL80K, HL300, HL303, HL310NK, HL510NK HL37NP HL37NP.1 HL37NPPr HL495457X
. ............................................................................................................................................................................................................... 785,- 942,- s DPH se vodní zápachovou uzávěrkou...............................................................................................................................................950,- 1140,- s DPH se zápachovou uzávěrkou PRIMUS a mřížkou PRIMUS................................................................................................... 1281,- 1538,- s DPH Plastový nástavec se svěrnou přírubou pro napojení povlakových krytin (PVC, kaučuk) na vyžádání - viz. schéma napojení. Kruhová vtoková mřížka ø115mm z nerezové oceli. Vhodná pro vtoky HL310NK a HL510NK. Výkresy instalace zašleme na vyžádání............................................................................................................................................................................................2812,- 3374,- s DPH
Náhradní díly HL037N.1E Vtoková mřížka z nerezové oceli 115x115mm 327,HL037NP.2E Límec 185x185mm z PVC s O-kroužkem 139,HL340N Nástavec ø110mm/100mm včetně O-kroužku 197,-
8
392,- s DPH 167,- s DPH 236,- s DPH
HL2000 Zápachový uzávěr Primus HL0510.7E Sifonová vložka komplet
387,246,-
464,- s DPH 295,- s DPH
®
Odpady, sifony HL37N
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Plastový nástavec ø110 mms plastovým rámem 123 x 123 mm a s vtokovou mřížkou z nerezové oceli 115x115 mm, třída zatížení K3 (300 kg). Vhodný pro tělesa vtoků HL 70K, HL 80K, HL 90K, HL 300K, HL 304K, HL 310NK a HL 510 NK HL37N HL37N.1 HL37NPr
. ...............................................................................................................................................................................................................545,- 654,- s DPH s vodní zápachovou uzávěrkou..................................................................................................................................................686,- 823,- s DPH se zápachovou uzávěrkou PRIMUS a mřížkou PRIMUS.....................................................................................................978,- 1174,- s DPH
Náhradní díly HL037Pr.1E Vtoková mřížka PRIMUS z nerezové oceli 115x115mm 335,- 402,- s DPH HL037N.1E Vtoková mřížka z nerezové oceli 115x115mm 327,- 392,- s DPH HL037N.11E Vtoková mřížka z nerezové oceli 115x115mm zlacená 2734,- 3281,- s DPH HL037N.2E Nástavec ø110mm/90/123x123mm s O-kroužkem 179,- 215,- s DPH
HL38N
HL01067D O-kroužek 92x4 mm HL037N.0E Stavební krytka 123x123 HL0510.7E Sifonová vložka komplet HL0510.8E Zvonek sifonu HL2000 Zápachový uzávěr ”Primus” HL02000.1E Plovák k Primusu HL2000
25,29,246,107,387,195,-
30,- s DPH 35,- s DPH 295,- s DPH 129,- s DPH 464,- s DPH 234,- s DPH
Plastový nástavec ø110 mm s kruhovým rámem ø133mm a vtokovou krytkou z nerezové oceli ø112mm, třída zatížení K3 (300 kg). HL38N HL38N.1 HL38NPr
. ..............................................................................................................................................................................................................1119,- 1342,- s DPH s vodní zápachovou uzávěrkou................................................................................................................................................1256,- 1508,- s DPH se zápachovou uzávěrkou PRIMUS.........................................................................................................................................1399,- 1678,- s DPH
Náhradní díly HL038.3E Vtoková krytka z nerezové oceli kruhová ø112 mm pro HL38N, HL80(.1)(H)R 889,- 1067,- s DPH HL038N.4E Nástavec ø110 mm kruhový,s rámem z nerezové oceli ø133mm s O-kroužkem 447,- 537,- s DPH HL038N.3E Vtoková krytka z nerezové oceli kruhová ø112 mm pro HL38N.1 HL38NPr, HL310N(Pr)R, HL510N(Pr)R) 889,- 1067,- s DPH
HL39
HL01067D O-kroužek 92x4mm k HL38N HL0510.7E Zápachový uzávěr kompletní HL2000 Zápachový uzávěr ”Primus” HL02000.1E Plovák k Primusu HL2000
25,246,387,195,-
30,- s DPH 295,- s DPH 464,- s DPH 234,- s DPH
Plastový nástavec ø110 mm s plastovým rámem 147 x 147 mmm, s vtokovou mřížkou z nerezové oceli 140x140 mm, třída zatížení K3 (300 kg). Vhodný pro tělesa vtoků HL 70K, HL 80K, HL 90K, HL 300K, HL 304K,HL 310NK, a HL 510 NK HL39 HL39.1 HL39Pr
. ............................................................................................................................................................................................................... 624,- 749,- s DPH s vodní zápachovou uzávěrkou . ............................................................................................................................................... 785,- 942,- s DPH se zápachovou uzávěrkou PRIMUS......................................................................................................................................... 1120,- 1344,- s DPH
Náhradní díly HL0300.5EN Nový nástavec ø110 mm / 92 mm / 147x147 mm s O-kroužkem HL0300.1E Vtoková mřížka z nerezové oceli 140x140 mm HL01067D O-kroužek 92x4 mm
HL39G
263,-
315,- s DPH
556,25,-
667,- s DPH 30,- s DPH
HL0510.7E Sifonová vložka komplet HL0510.8E Zvonek sifonu HL2000 Zápachový uzávěr ”Primus” HL02000.1E Plovák k Primusu HL2000
246,107,387,195,-
295,- s DPH 129,- s DPH 464,- s DPH 234,- s DPH
Plastový nástavec ø110 mm s litinovým rámem 150 x 150 mm a mřížkou z litiny 137x137 mm, třída zatížení L15 (1500 kg) HL39G HL39.1G HL39PrG
. .............................................................................................................................................................................................................1390,- 1668,- s DPH s vodní zápachovou uzávěrkou . ............................................................................................................................................. 1519,- 1823,- s DPH se zápachovou uzávěrkou PRIMUS.........................................................................................................................................1793,- 2151,- s DPH
Náhradní díly HL037G.1E Litinová mřížka 137x137mm HL01067D O-kroužek 92x4mm HL0510.7E Sifonová vložka komplet
HL40
HL0510.8E Zvonek sifonu HL2000 Zápachový uzávěr ”Primus” HL02000.1E Plovák k Primusu HL2000
107,387,195,-
129,- s DPH 464,- s DPH 234,- s DPH
Přechodový kus DN 40 x R 1/2” ..................................................................................................................................................413,- Přechodový kus DN 40 x R 3/4”....................................................................................................................................................413,- Přechodový kus DN 40 x R 1”........................................................................................................................................................413,-
496,- s DPH 496,- s DPH 496,- s DPH
Univerzální přechodový kus na beztlakové (úkapové) odtokové potrubí DN 50 HL41.2 HL41.3 HL41.4
HL42
815,- s DPH 30,- s DPH 295,- s DPH
Univerzální přechodový kus na beztlakové (úkapové) odtokové potrubí DN 40 (vhodné pro HL136.2) HL40.2 HL40.3 HL40.4
HL41
680,25,246,-
Přechodový kus DN 50 x R 1/2” .................................................................................................................................................460,- Přechodový kus DN 50 x R 3/4”...................................................................................................................................................460,- Přechodový kus DN 50 x R 1”.......................................................................................................................................................460,-
552,- s DPH 552,- s DPH 552,- s DPH
Tlaková zátka 1/2” s odvzdušňovacím otvorem, těsná pro tlak až do 1,5 MPa (15 bar), jen pro tlakovou zkoušku potrubí vodou HL42.B HL42.R
modrá......................................................................................................................................................................................................49,- červená....................................................................................................................................................................................................49,-
59,- s DPH 59,- s DPH
Náhradní díly HL042.1D Těsnící kroužek 1/2”
12,-
15,- s DPH
9
®
Odpady, sifony HL42.MS
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Tlaková zátka s mosazným závitem 1/2” s odvzdušňovacím otvorem, těsná pro tlak až do 1,5 MPa (15 bar), pro tlakovou zkoušku potrubí vodou i vzduchem HL42B.MS HL42R.MS
modrá.................................................................................................................................................................................................... 111,- červená.................................................................................................................................................................................................. 111,-
133,- s DPH 133,- s DPH
Náhradní díly HL042.1D Těsnící kroužek 1/2”
HL43
12,-
15,- s DPH
Tlaková zátka 3/4” s odvzdušňovacím otvorem, těsná pro tlak až do 1,5 MPa (15 bar), jen pro tlakovou zkoušku potrubí vodou HL43.B HL43.R
modrá......................................................................................................................................................................................................56,- červená....................................................................................................................................................................................................56,-
67,- s DPH 67,- s DPH
Náhradní díly HL043.1D Těsnící kroužek 3/4”
HL44
. ............................................................................................................................................................................................................... 272,- 326,- s DPH Montážní deska z plastu se sítí otvorů, zvukově izolovaná.............................................................................................850,- 1020,- s DPH
Ochranná stavební zátka HL45
HL50F
15,- s DPH
Montážní deska z plastu se sítí otvorů. Vhodná pro HL34, HL134.0, HL400 HL44 HL44S
HL45
12,-
DN 32/40/50..........................................................................................................................................................................................50,-
61,- s DPH
Žlab (liniový odtok) do sprchových koutů, přímé provedení do plochy včetně krytu žlabu ”Standart”. Kryt žlabu i těleso žlabu z nerezové oceli 1.4301, šířka krytu žlabu 40mm. Zápachová uzavěrka s ležatým odtokem DN50 z PP s vyjímatelnou čistící vložkou, odtoková kapacita 0,8l/sec. Těleso žlabu je vyrobeno technologií bez svařování - vakuově lisováno -4 kusy výškově stavitelných montážních nožiček (zvukově izolovaných). Zatěžovací třída K3 (300kg).Pro vyšší kapacitu odtoku možnost 2 zápachových uzavírek 1,5l/sec. Počty aretačních šroubů podle délek žlabů: 600-700mm…2páry ; 800-1100…3páry; 1200-1300mm…4 páry, od 1400mm ..6párů HL50F/60 HL50F/70 HL50F/80 HL50F/90 HL50F/100 HL50F/110 HL50F/120 HL50F/130
celková délka žlabu 600mm, kryt žlabu délka 500mm.................................................................................................13142,- 15770,- s DPH celková délka žlabu 700mm, kryt žlabu délka 600mm.................................................................................................13562,- 16275,- s DPH celková délka žlabu 800mm, kryt žlabu délka 700mm.................................................................................................14749,- 17699,- s DPH celková délka žlabu 900mm, kryt žlabu délka 800mm.................................................................................................15212,- 18254,- s DPH celková délka žlabu 1000mm, kryt žlabu délka 900mm............................................................................................. 16072,- 19286,- s DPH celková délka žlabu 1100mm, kryt žlabu délka 1000mm.............................................................................................16514,- 19816,- s DPH celková délka žlabu 1200mm, kryt žlabu délka 1100mm.............................................................................................17291,- 20749,- s DPH celková délka žlabu 1300mm, kryt žlabu délka 1200mm............................................................................................23290,- 27948,- s DPH
Náhradní díly HL050.0E Těleso odtoku DN50 STARÉ HL050.0EN Těleso odtoku DN50 NOVÉ HL050.1E Výškově stavitelné nožičky se zvukovou izolací(pod těleso žlabu) - 2 ks HL050.2E Aretační šrouby pod kryt (2 ks) HL050.3E Aretační šrouby (obkl. kámen) pod kryt (2 ks) pro nastavení krytů S 15-29mm, D 18-32mm, I 29-43mm
HL50W
238,396,-
285,- s DPH 475,- s DPH
396,-
475,- s DPH
HL050.4E Podpůrné úhelníky na stěnu se zvukovou izolací ( k variantě W) HL050.5E Sifónová vložka STARÁ HL050.5EN Sifónová vložka NOVÁ (W i F provedení) HL050.6E Těsnění tělesa odtoku STARÉ HL050.8E Dorazová lišta (tvar U) pro dlažbu
507,279,279,622,122,-
609,- s DPH 335,- s DPH 335,- s DPH 747,- s DPH 146,- s DPH
Žlab (liniový odtok) do sprchových koutů, stěnové provedení (přechod podlaha-stěna) včetně krytu žlabu ”Standart”. Kryt žlabu i těleso žlabu z nerezové oceli 1.4301, šířka krytu žlabu 40mm. Zápachová uzavěrka s ležatým odtokem DN50 z PP s vyjímatelnou čistící vložkou, odtoková kapacita 0,8l/sec. Těleso žlabu je vyrobeno technologií bez svařování - vakuově lisováno -2 kusy výškově stavitelných montážních nožiček plus 2 fixační úhelníky do stěny (zvukově izolované). Zatěžovací třída K3 (300kg).Pro vyšší kapacitu odtoku možnost 2 zápachových uzavírek1,5l/sec. HL50W/60 HL50W/70 HL50W/80 HL50W/90 HL50W/100 HL50W/110 HL50W/120 HL50W/130
10
1401,- 1681,- s DPH 1401,- 1681,- s DPH
celková délka žlabu 600mm, kryt žlabu délka 500mm................................................................................................16346,- celková délka žlabu 700mm, kryt žlabu délka 600mm................................................................................................16608,- celková délka žlabu 800mm, kryt žlabu délka 700mm.................................................................................................16997,- celková délka žlabu 900mm, kryt žlabu délka 800mm................................................................................................ 17700,- celková délka žlabu 1000mm, kryt žlabu délka 900mm............................................................................................. 17984,- celková délka žlabu 1100mm, kryt žlabu délka 1000mm.............................................................................................18814,- celková délka žlabu 1200mm, kryt žlabu délka 1100mm............................................................................................19094,- celková délka žlabu 1300mm, kryt žlabu délka 1200mm.............................................................................................24927,-
19616,- s DPH 19930,- s DPH 20396,- s DPH 21240,- s DPH 21581,- s DPH 22577,- s DPH 22913,- s DPH 29912,- s DPH
®
Odpady, sifony HL50F.0
Ceny jsou uvedeny v Kč
Žlab (liniový odtok) do sprchových koutů, přímé provedení do plochy bez krytu žlabu. Těleso žlabu z nerezové oceli 1.4301. Zápachová uzavěrka s ležatým odtokem DN50 z PP s vyjímatelnou čistící vložkou, odtoková kapacita 0,8l/sec. Těleso žlabu je vyrobeno technologií bez svařování - vakuově lisováno -4 kusy výškově stavitelných montážních nožiček (zvukově izolovaných). Zatěžovací třída K3 (300kg).Pro vyšší kapacitu odtoku možnost 2 zápachových uzavírek 1,5l/sec.
LX
50
HL50F.0/60 HL50F.0/70 HL50F.0/80 HL50F.0/90 HL50F.0/100 HL50F.0/110 HL50F.0/120 HL50F.0/130 HL50F.0/140 HL50F.0/150 HL50F.0/160 HL50F.0/170 HL50F.0/180 HL50F.0/190 HL50F.0/200 HL50F.0/210
154
128 108
74 DN50
LX-100 mm
HL50FF.0
HL Hutterer & Lechner GmbH
celková délka žlabu 600mm................................................................................................................................................... 12354,- celková délka žlabu 700mm....................................................................................................................................................12710,- celková délka žlabu 800mm................................................................................................................................................... 13836,- celková délka žlabu 900mm,...................................................................................................................................................14224,- celková délka žlabu 1000mm................................................................................................................................................. 15022,- celková délka žlabu 1100mm..................................................................................................................................................15401,- celková délka žlabu 1200mm..................................................................................................................................................16104,- celková délka žlabu 1300mm..................................................................................................................................................21708,- celková délka žlabu 1400mm, se dvěma odtoky............................................................................................................ 28041,- celková délka žlabu 1500mm, se dvěma odtoky............................................................................................................ 28772,- celková délka žlabu 1600mm, se dvěma odtoky............................................................................................................29504,- celková délka žlabu 1700mm, se dvěma odtoky............................................................................................................30236,- celková délka žlabu 1800mm, se dvěma odtoky............................................................................................................30968,- celková délka žlabu 1900mm, se dvěma odtoky.............................................................................................................31699,- celková délka žlabu 2000mm, se dvěma odtoky............................................................................................................ 32432,- celková délka žlabu 2100mm, se dvěma odtoky.............................................................................................................33163,-
14824,- s DPH 15252,- s DPH 16603,- s DPH 17069,- s DPH 18026,- s DPH 18481,- s DPH 19325,- s DPH 26050,- s DPH 33649,- s DPH 34526,- s DPH 35405,- s DPH 36283,- s DPH 37162,- s DPH 38039,- s DPH 38918,- s DPH 39795,- s DPH
Žlab (liniový odtok) do sprchových koutů ploché provedení „Flach“ - stavební výška min. 90 mm, zápachová uzávěrka 30mm!!, přímé provedení do plochy bez krytu žlabu. Těleso žlabu z nerezové oceli 1.4301. Zápachová uzavěrka s ležatým odtokem DN50 z PP s vyjímatelnou čistící vložkou, odtoková kapacita 0,8l/sec. Těleso žlabu je vyrobeno technologií bez svařování - vakuově lisováno -4 kusy výškově stavitelných montážních nožiček (zvukově izolovaných). Zatěžovací třída K3 (300kg).Pro vyšší kapacitu odtoku možnost 2 zápachových uzavírek 1,5l/sec. HL50FF.0/60 HL50FF.0/70 HL50FF.0/80 HL50FF.0/90 HL50FF.0/100 HL50FF.0/110 HL50FF.0/120 HL50FF.0/130
ploché provedení žlabu, celková délka žlabu 600mm................................................................................................. 12354,- ploché provedení žlabu, celková délka žlabu 700mm..................................................................................................12710,- ploché provedení žlabu, celková délka žlabu 800mm................................................................................................. 13836,- ploché provedení žlabu, celková délka žlabu 900mm,.................................................................................................14224,- ploché provedení žlabu, celková délka žlabu 1000mm............................................................................................... 15022,- ploché provedení žlabu, celková délka žlabu 1100mm................................................................................................15401,- ploché provedení žlabu, celková délka žlabu 1200mm................................................................................................16104,- ploché provedení žlabu, celková délka žlabu 1300mm................................................................................................21708,-
14824,- s DPH 15252,- s DPH 16603,- s DPH 17069,- s DPH 18026,- s DPH 18481,- s DPH 19325,- s DPH 26050,- s DPH
Náhradní díly HL050.10E Těleso odtoku ploché DN50 HL050.1E Výškově stavitelné nožičky se zvukovou izolací(pod těleso žlabu) - 2 ks HL050.2E Aretační šrouby pod kryt (2 ks)
HL50W.0
50 50
74 DN50
108
238,396,-
285,475,- s DPH s DPH
HL050.4E Podpůrné úhelníky na stěnu se zvukovou izolací ( k variantě W) HL050.11E Sifónová vložka 30mm (W i F provedení) HL050.8E Dorazová lišta (tvar U) pro dlažbu
507,279,122,-
609,- s DPH 335,- s DPH 146,- s DPH
Žlab (liniový odtok) do sprchových koutů, stěnové provedení (přechod podlaha-stěna) bez krytu žlabu. Těleso žlabu z nerezové oceli 1.4301. Zápachová uzavěrka s ležatým odtokem DN50 z PP s vyjímatelnou čistící vložkou, odtoková kapacita 0,8l/sec. Těleso žlabu je vyrobeno technologií bez svařování - vakuově lisováno -2 kusy výškově stavitelných montážních nožiček plus 2 fixační úhelníky do stěny (zvukově izolované). Zatěžovací třída K3 (300kg).Pro vyšší kapacitu odtoku možnost 2 zápachových uzavírek 1,5l/sec.
LX LX-100 mm
124 20
1401,- 1681,- s DPH
HL50W.0/60 HL50W.0/70 HL50W.0/80 HL50W.0/90 HL50W.0/100 HL50W.0/110 HL50W.0/120 HL50W.0/130 HL50W.0/140 HL50W.0/150 HL50W.0/160 HL50W.0/170 HL50W.0/180 HL50W.0/190 HL50W.0/200 HL50W.0/210
celková délka žlabu 600mm....................................................................................................................................................15558,- 18669,- s DPH celková délka žlabu 700mm....................................................................................................................................................15757,- 18908,- s DPH celková délka žlabu 800mm...................................................................................................................................................16084,- 19301,- s DPH celková délka žlabu 900mm....................................................................................................................................................16713,- 20055,- s DPH celková délka žlabu 1000mm................................................................................................................................................. 16934,- 20320,- s DPH celková délka žlabu 1100mm..................................................................................................................................................17701,- 21241,- s DPH celková délka žlabu 1200mm................................................................................................................................................. 17890,- 21468,- s DPH celková délka žlabu 1300mm.................................................................................................................................................23344,- 28013,- s DPH celková délka žlabu 1400mm, se dvěma odtoky.............................................................................................................29747,- 35697,- s DPH celková délka žlabu 1500mm, se dvěma odtoky............................................................................................................ 30334,- 36400,- s DPH celková délka žlabu 1600mm, se dvěma odtoky.............................................................................................................30931,- 37117,- s DPH celková délka žlabu 1700mm, se dvěma odtoky.............................................................................................................31516,- 37819,- s DPH celková délka žlabu 1800mm, se dvěma odtoky............................................................................................................32090,- 38508,- s DPH celková délka žlabu 1900mm, se dvěma odtoky.............................................................................................................32675,- 39210,- s DPH celková délka žlabu 2000mm, se dvěma odtoky.............................................................................................................33261,- 39913,- s DPH celková délka žlabu 2100mm, se dvěma odtoky............................................................................................................ 33833,- 40600,- s DPH
11
®
Odpady, sifony HL50WF.0
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Žlab (liniový odtok) do sprchových koutů ploché provedení „Flach“ - stavební výška min. 90 mm, zápachová uzávěrka 30mm!!, stěnové provedení (přechod podlaha-stěna) bez krytu žlabu. Těleso žlabu z nerezové oceli 1.4301. Zápachová uzavěrka s ležatým odtokem DN50 z PP s vyjímatelnou čistící vložkou, odtoková kapacita 0,8l/sec. Těleso žlabu je vyrobeno technologií bez svařování - vakuově lisováno -2 kusy výškově stavitelných montážních nožiček plus 2 fixační úhelníky do stěny (zvukově izolované). Zatěžovací třída K3 (300kg).Pro vyšší kapacitu odtoku možnost 2 zápachových uzavírek 1,5l/sec. HL50WF.0/60 ploché provedení žlabu, celková délka žlabu 600mm..................................................................................................15558,- HL50WF.0/70 ploché provedení žlabu, celková délka žlabu 700mm..................................................................................................15757,- HL50WF.0/80 ploché provedení žlabu, celková délka žlabu 800mm.................................................................................................16084,- HL50WF.0/90 ploché provedení žlabu, celková délka žlabu 900mm..................................................................................................16713,- HL50WF.0/100 ploché provedení žlabu, celková délka žlabu 1000mm............................................................................................... 16934,- HL50WF.0/110 ploché provedení žlabu, celková délka žlabu 1100mm................................................................................................17701,- HL50WF.0/120 ploché provedení žlabu, celková délka žlabu 1200mm............................................................................................... 17890,- HL50WF.0/130 ploché provedení žlabu, celková délka žlabu 1300mm...............................................................................................23344,-
HL050S
Kryt žlabu ”Standard” z nerezové oceli 1.4301, Zatěžovací třída K3 (300kg). Se standardními aretačními šrouby výškově stavitelný pro dlažbu (včetně lepidla) síly od 2-16 mm. Pro dlažbu z kamene( více jak 16mm) lze použít aretační šrouby HL050.3E HL050S/60 HL050S/70 HL050S/80 HL050S/90 HL050S/100 HL050S/110 HL050S/120 HL050S/130 HL050S/140 HL050S/150 HL050S/160 HL050S/170 HL050S/180 HL050S/190 HL050S/200 HL050S/210
HL050D
946,- s DPH 1021,- s DPH 1096,- s DPH 1185,- s DPH 1260,- s DPH 1336,- s DPH 1423,- s DPH 1898,- s DPH 3177,- s DPH 3528,- s DPH 3879,- s DPH 4230,- s DPH 4567,- s DPH 4918,- s DPH 5269,- s DPH 5635,- s DPH
kryt žlabu ”Design” délky 500mm pro celkovou délku žlabu 600mm......................................................................2847,- kryt žlabu ”Design” délky 600mm pro celkovou délku žlabu 700mm......................................................................2973,- kryt žlabu ”Design” délky 700mm pro celkovou délku žlabu 800mm......................................................................3372,- kryt žlabu ”Design” délky 800mm pro celkovou délku žlabu 900mm......................................................................3634,- kryt žlabu ”Design” délky 900mm pro celkovou délku žlabu 1000mm...................................................................3928,- kryt žlabu ”Design” délky 1000mm pro celkovou délku žlabu 1100mm..................................................................4202,- kryt žlabu ”Design” délky 1100mm pro celkovou délku žlabu 1200mm..................................................................4413,- kryt žlabu “Design” délky 1200mm pro celkovou délku žlabu 1300mm................................................................. 6101,- kryt žlabu “Design” délky 1300mm pro celkovou délku žlabu 1400mm.................................................................7233,- kryt žlabu “Design” délky 1400mm pro celkovou délku žlabu 1500mm.................................................................8123,- kryt žlabu “Design” délky 1500mm pro celkovou délku žlabu 1600mm.................................................................9014,- kryt žlabu “Design” délky 1600mm pro celkovou délku žlabu 1700mm.................................................................9916,- kryt žlabu “Design” délky 1700mm pro celkovou délku žlabu 1800mm...............................................................10807,- kryt žlabu “Design” délky 1800mm pro celkovou délku žlabu 1900mm............................................................... 11697,- kryt žlabu “Design” délky 1900mm pro celkovou délku žlabu 2000mm...............................................................12587,- kryt žlabu “Design” délky 2000mm pro celkovou délku žlabu 2100mm...............................................................13575,-
3417,- s DPH 3567,- s DPH 4046,- s DPH 4361,- s DPH 4714,- s DPH 5043,- s DPH 5295,- s DPH 7321,- s DPH 8679,- s DPH 9747,- s DPH 10816,- s DPH 11899,- s DPH 12968,- s DPH 14036,- s DPH 15104,- s DPH 16290,- s DPH
Kryt žlabu ”Individuel” z nerezové oceli 1.4301 připraven pro nalepení podlahových krytin např. mosaikové dlažby apod. Zatěžovací třída K3 (300kg). Se standardními aretačními šrouby výškově stavitelný pro dlažbu (včetně lepidla) síly od 16-30 mm. Pro dlažbu z kamene( více jak 30mm) lze použít aretační šrouby HL050.3E HL050I/60 HL050I/70 HL050I/80 HL050I/90 HL050I/100 HL050I/110 HL050I/120 HL050I/130 HL050I/140 HL050I/150 HL050I/160 HL050I/170 HL050I/180 HL050I/190 HL050I/200 HL050I/210
12
kryt žlabu ”Standart” délky 500mm pro celkovou délku žlabu 600mm....................................................................788,- kryt žlabu ”Standart” délky 600mm pro celkovou délku žlabu 700mm.................................................................... 851,- kryt žlabu ”Standart” délky 700mm pro celkovou délku žlabu 800mm.................................................................... 914,- kryt žlabu ”Standart” délky 800mm pro celkovou délku žlabu 900mm.....................................................................987,- kryt žlabu ”Standart” délky 900mm pro celkovou délku žlabu 1000mm................................................................1050,- kryt žlabu ”Standart” délky 1000mm pro celkovou délku žlabu 1100mm...............................................................1114,- kryt žlabu ”Standart” délky 1100mm pro celkovou délku žlabu 1200mm..............................................................1186,- kryt žlabu “Standart” délky 1200mm pro celkovou délku žlabu 1300mm..............................................................1582,- kryt žlabu “Standart” délky 1300mm pro celkovou délku žlabu 1400mm..............................................................2647,- kryt žlabu “Standart” délky 1400mm pro celkovou délku žlabu 1500mm............................................................. 2940,- kryt žlabu “Standart” délky 1500mm pro celkovou délku žlabu 1600mm..............................................................3232,- kryt žlabu “Standart” délky 1600mm pro celkovou délku žlabu 1700mm..............................................................3525,- kryt žlabu “Standart” délky 1700mm pro celkovou délku žlabu 1800mm............................................................. 3806,- kryt žlabu “Standart” délky 1800mm pro celkovou délku žlabu 1900mm............................................................. 4098,- kryt žlabu “Standart” délky 1900mm pro celkovou délku žlabu 2000mm.............................................................4391,- kryt žlabu “Standart” délky 2000mm pro celkovou délku žlabu 2100mm............................................................. 4696,-
Kryt žlabu ”Design” z nerezové oceli 1.4301 s masivní deskou (3mm) z kartáčované nerezové oceli (matná). Zatěžovací třída K3 (300kg). Se standardními aretačními šrouby výškově stavitelný pro dlažbu (včetně lepidla) síly od 5-19 mm. Pro dlažbu z kamene (více jak 19mm) lze použít aretační šrouby HL050.3E HL050D/60 HL050D/70 HL050D/80 HL050D/90 HL050D/100 HL050D/110 HL050D/120 HL050D/130 HL050D/140 HL050D/150 HL050D/160 HL050D/170 HL050D/180 HL050D/190 HL050D/200 HL050D/210
HL050I
18669,- s DPH 18908,- s DPH 19301,- s DPH 20055,- s DPH 20320,- s DPH 21241,- s DPH 21468,- s DPH 28013,- s DPH
kryt žlabu ”Individuel” délky 500mm pro celkovou délku žlabu 600mm...............................................................2951,- 3541,- s DPH kryt žlabu ”Individuel” délky 600mm pro celkovou délku žlabu 700mm................................................................3235,- 3882,- s DPH kryt žlabu ”Individuel” délky 700mm pro celkovou délku žlabu 800mm................................................................3509,- 4211,- s DPH kryt žlabu ”Individuel” délky 800mm pro celkovou délku žlabu 900mm...............................................................3876,- 4651,- s DPH kryt žlabu ”Individuel” délky 900mm pro celkovou délku žlabu 1000mm.............................................................4108,- 4930,- s DPH kryt žlabu ”Individuel” délky 1000mm pro celkovou délku žlabu 1100mm.......................................................... 4402,- 5282,- s DPH kryt žlabu ”Individuel” délky 1100mm pro celkovou délku žlabu 1200mm...........................................................4622,- 5546,- s DPH kryt žlabu “Individuel” délky 1200mm pro celkovou délku žlabu 1300mm...........................................................6329,- 7595,- s DPH kryt žlabu “Individuel” délky 1300mm pro celkovou délku žlabu 1400mm...........................................................6879,- 8255,- s DPH kryt žlabu “Individuel” délky 1400mm pro celkovou délku žlabu 1500mm...........................................................7769,- 9323,- s DPH kryt žlabu “Individuel” délky 1500mm pro celkovou délku žlabu 1600mm...........................................................8672,- 10406,- s DPH kryt žlabu “Individuel” délky 1600mm pro celkovou délku žlabu 1700mm...........................................................9563,- 11475,- s DPH kryt žlabu “Individuel” délky 1700mm pro celkovou délku žlabu 1800mm........................................................ 10452,- 12543,- s DPH kryt žlabu “Individuel” délky 1800mm pro celkovou délku žlabu 1900mm.........................................................11343,- 13612,- s DPH kryt žlabu “Individuel” délky 1900mm pro celkovou délku žlabu 2000mm........................................................ 12233,- 14680,- s DPH kryt žlabu “Individuel” délky 2000mm pro celkovou délku žlabu 2100mm......................................................... 13197,- 15837,- s DPH
®
Odpady, sifony HL51
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Vanová odpadní souprava 6/4” s ohebnou přepadovou hadicí s možností zkrácení, s kuličkovým řetízkem a zátkou, růžice přepadu z nerezové oceli HL51
. ............................................................................................................................................................................................................... 493,-
592,- s DPH
Náhradní díly HL01014D HL01040D HL01042D HL01053D HL015U.1E
HL52K
Těsnění přepadu 69x51mm Talířek ventilu 6/4” Šroubek k ventilu M6x25mm Těsnění ventilu Těleso ventilu s připojením závitu 6/4”
48,103,21,48,243,-
58,- s DPH 124,- s DPH 25,- s DPH 58,- s DPH 292,- s DPH
HL051.1E HL051.2E HL051.3E HL051.5E
Růžice přepadu Šroub k růžici přepadu Řetízek se zátkou Přepadová hadice
106,27,185,152,-
127,- s DPH 32,- s DPH 222,- s DPH 183,- s DPH
Krátký žlab - těleso podlahové vpusti s ležatým odtokem DN50(s kloubovým připojením), s polymerbetonovým límcem s polyesterovou tkaninou pro přímé napojení hydroizolačních stěrek (kontaktních-alternativních hydroizolací). Těleso vtoku obsahuje zápachovou uzavěrku s vyjímatelnou vložkou, odtoková kapacita 0,8 l/sec. 4 ks výškově stavitelných montážních nožiček (zvukově izolovaných) HL52K
DN50...................................................................................................................................................................................................9278,- 11134,- s DPH
Náhradní díly HL050.1E Sada výškově stavitelných nožiček(se zvukovou ochranou - 2ks) HL050.5E Sifónová vložka
HL052.1
238,279,-
285,- s DPH 335,- s DPH
Nástavec k HL52K s plastovým rámem a pohledovými díly z broušené nerezové oceli (matná). Zatěžovací třída K3 (300kg) HL052.1-300x100 rozměr 300x100mm s vnějším rámem..........................................................................................................................7504,- 9004,- s DPH
HL052.2
Nástavec k HL52K s plastovým rámem a pohledovými díly z leštěné nerezové oceli. Zatěžovací třída K3 (300kg) HL052.2-300x100 rozměr 300x100mm s vnějším rámem........................................................................................................................10703,- 12843,- s DPH
HL052.3
Nástavec k HL52K s plastovým rámem a pohledovými díly z nerezové oceli - matná černá. Zatěžovací třída K3 (300kg) HL052.3-300x100 rozměr 300x100mm s vnějším rámem.........................................................................................................................12111,- 14533,- s DPH
HL052.4
Nástavec k HL52K s plastovým rámem a pohledovými díly z patinované bronzi.Zatěžovací třída K3 (300kg) HL052.4-300x100 rozměr 300x100mm s vnějším rámem.......................................................................................................................16466,- 19759,- s DPH
13
®
Odpady, sifony HL62
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Střešní vtok pro ploché střechy, tepelně izolovaný se svislým odtokem DN 75, DN 110, DN 125, DN 160, s izolační svorkou a křídl. maticemi z nerezové oceli se záchytným košem. K napojení na systémy fóliových hydroizolací. HL62/DN HL62.1/DN
bez el. ohřevu..................................................................................................................................................................................2749,- 3299,- s DPH s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................5749,- 6899,- s DPH
Náhradní díly HL062.1E Záchytný koš HL062.3E Příruba z nerezové oceli
HL062.4E Křídlové matice, sada 6 ks HL062N.4E Šestihranná matice 6ks.
bez el. ohřevu................................................................................................................................................................................. 3480,- 4176,- s DPH s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................6992,- 8390,- s DPH
Náhradní díly HL062.3E Příruba z nerezové oceli HL062.4E Křídlové matice, sada 6 ks HL062B.3E Nosný kroužek
220,- s DPH 223,- s DPH
Střešní vtok v provedení pro pochůzné střechy, tepelně izolovaný se svislým odtokem DN 75, DN 110, DN 125, DN 160, s izolační svorkou a křídl. maticemi z nerezové oceli s mřížkou z nerezové oceli 138x138 mm. K napojení na systémy fóliových hydroizolací. HL62B/DN HL62.1B/DN
HL62BF
183,186,-
www.hl.blucina.net
HL62B
902,- 1083,- s DPH 1196,- 1435,- s DPH
1196,- 1435,- s DPH 183,- 220,- s DPH 164,- 197,- s DPH
HL66.9
Nástavec ø145mm s žebry/150x150mm/ 138x138mm mřížka nerez HL062N.4E Šestihranná matice 6ks.
1792,- 2151,- s DPH 186,- 223,- s DPH
Střešní vtok pro ploché střechy s přírubou pro přímé napojení FPO fólií, tepelně izolovaný se svislým odtokem DN 75, DN 110, DN 125 s mřížkou z nerezové oceli. K navaření na systémy FPO fóliových hydroizolací na polypropylenové bázi. Vtok je také určen pro napojenínalepení PE parozábrany u klasicky zateplených střech. HL62BF/DN bez el. ohřevu..................................................................................................................................................................................2953,- 3544,- s DPH HL62.1BF/DN s el. ohřevem....................................................................................................................................................................................6941,- 8329,- s DPH
HL62BH
Střešní vtok v provedení pro pochůzné střechy, tepelně izolovaný se svislým odtokem DN 75, DN 110, DN 125, DN 160, s továrně napojenou asfaltovou izolační manžetou s mřížkou z nerezové oceli 138x138 mm HL62BH/DN bez el. ohřevu..................................................................................................................................................................................3596,- 4315,- s DPH HL62.1BH/DN s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................7349,- 8819,- s DPH Náhradní díly HL062B.3E Nosný kroužek
HL62F
164,-
197,- s DPH
HL66.9
bez el. ohřevu.................................................................................................................................................................................. 2133,- 2560,- s DPH s el. ohřevem....................................................................................................................................................................................6032,- 7238,- s DPH
Náhradní díly HL062.1E Záchytný koš
1792,- 2151,- s DPH
Střešní vtok pro ploché střechy s přírubou pro přímé napojení FPO fólií, tepelně izolovaný se svislým odtokem DN 75, DN 110, DN 125 se záchytným košem. K navaření na systémy FPO fóliových hydroizolací na polypropylenové bázi. Vtok je také určen pro napojení-nalepení PE parozábrany u klasicky zateplených střech. HL62F/DN HL62.1F/DN
HL62H
Nástavec ø145mm s žebry /150x150mm/ 138x138mm mřížka nerez
902,- 1083,- s DPH
Střešní vtok pro ploché střechy, tepelně izolovaný se svislým odtokem DN 75, DN 110, DN 125, DN 160, s továrně napojenou asfaltovou izolační manžetou se záchytným košem HL62H/DN bez el. ohřevu................................................................................................................................................................................. 2840,- 3408,- s DPH HL62.1H/DN s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................6777,- 8133,- s DPH Náhradní díly HL062.1E Záchytný koš
HL62P
902,- 1083,- s DPH
Střešní vtok pro ploché střechy, tepelně izolovaný se svislým odtokem DN75, DN110, DN125, DN160, s PVC pevnou izolační přírubou se záchytným košem. Pro napojení navařením na systémy mPVC fólivých hydroizolací. HL62P/DN HL62.1P/DN
bez el. ohřevu..................................................................................................................................................................................2749,- 3299,- s DPH s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................5749,- 6899,- s DPH
Náhradní díly HL062.1E Záchytný koš
HL62BP
902,- 1083,- s DPH
Střešní vtok v provedení pro pochůzné střechy, tepelně izolovaný se svislým odtokem DN75, DN110, DN125, DN160, s PVC pevnou izolační přírubou s mřížkou z nerezové oceli. Pro napojení navařením na systémy mPVC fólivých hydroizolací. HL62BP/DN bez el. ohřevu................................................................................................................................................................................. 3480,- 4176,- s DPH HL62.1BP/DN s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................6992,- 8390,- s DPH Náhradní díly HL062B.3E Nosný kroužek
14
164,-
197,- s DPH
HL66.9
Nástavec ø145mm s žebry /150x150mm/ 138x138mm mřížka nerez
1792,- 2151,- s DPH
®
Odpady, sifony HL63
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Střešní vtok ”Drainbox” tepelně izolovaný, se svislým odtokemDN 75, DN 110, DN 125, s izolační svorkou a křídl. maticemi z nerezové oceli vložený do krabice s nastavitelnou výškou podle tloušťky tepelné izolace (100-160 mm) se záchytným košem. Určen k napojení na systémy fóliových hydroizolací. HL63/DN HL63.1/DN
bez el. ohřevu..................................................................................................................................................................................5559,- 6671,- s DPH s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................6881,- 8258,- s DPH
Náhradní díly
HL63H
902,- 1083,- s DPH 1196,- 1435,- s DPH
HL062.4E Křídlové matice, sada 6 ks HL062N.4E Šestihranná matice 6ks.
183,186,-
www.hl.blucina.net
HL062.1E Záchytný koš HL062.3E Příruba z nerezové oceli
220,- s DPH 223,- s DPH
Střešní vtok ”DrainBox” tepelně izolovaný, se svislým odtokem DN75, DN110, DN125, s nastavitelnou výškou podle tloušťky tepelné izolace (100-160mm) se záchytným košem. S továrně napojenou asfaltovou izolační manžetou. HL63H/DN bez el. ohřevu.................................................................................................................................................................................. 6161,- 7394,- s DPH HL63.1H/DN s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................7231,- 8677,- s DPH Náhradní díly HL062.1E Záchytný koš
HL63P
902,- 1083,- s DPH
Střešní vtok ”DrainBox” tepelně izolovaný, se svislým odtokem DN75, DN110, DN125, s nastavitelnou výškou podle tloušťky tepelné izolace (100-160mm) se záchytným košem. S PVC pevnou izolační přírubou pro navaření mPVC fóliových hydroizolací HL63P/DN HL63.1P/DN
bez el. ohřevu..................................................................................................................................................................................5559,- 6671,- s DPH s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................6881,- 8258,- s DPH
Náhradní díly HL062.1E Záchytný koš
HL64
902,- 1083,- s DPH
Střešní vtok pro ploché střechy s ležatým odtokem DN 75/110, tepelně izolovaný, s izolační svorkou a křídl. maticemi z nerezové oceli se záchytným košem. Pro napojení na systémy fóliových hydroizolací. HL64 HL64.1
bez el. ohřevu.................................................................................................................................................................................. 3557,- 4268,- s DPH s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................7260,- 8713,- s DPH
Náhradní díly HL062.1E Záchytný koš HL062.3E Příruba z nerezové oceli
HL64B
902,- 1083,- s DPH 1196,- 1435,- s DPH
HL062.4E Křídlové matice, sada 6 ks HL062N.4E Šestihranná matice 6ks.
bez el. ohřevu..................................................................................................................................................................................4134,- 4961,- s DPH s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................7860,- 9432,- s DPH
Náhradní díly HL0317.4E Redukce DN75/110 HL062.3E Příruba z nerezové oceli HL062.4E Křídlové matice, sada 6 ks HL062N.4E Šestihranná matice 6ks.
185,- 222,- s DPH 1196,- 1435,- s DPH 183,- 220,- s DPH 186,- 223,- s DPH
HL062B.3E Nosný kroužek HL66.9 Nástavec ø145mm s žebry/150x150mm/ 138x138mm mřížka nerez
164,-
197,- s DPH
1792,- 2151,- s DPH
Střešní vtok pro ploché střechy s ležatým odtokem DN75, DN110 tepelně izolovaný s přírubou pro přímé napojení FPO fólií smřížkou z nerezové oceli. K navaření na systémy FPO fóliových hydroizolací na polypropylenové bázi. Vtok je také určen pro napojení-nalepení PE parozábrany u klasicky zateplených střech. HL64BF/7 HL64.1BF/7 HL64BF/1 HL64.1BF/1
HL64BH
220,- s DPH 223,- s DPH
Střešní vtok pro pochůzné střechy s ležatým odtokem DN 75/110, tepelně izolovaný, s izolační svorkou a křídl. maticemi z nerezové oceli s mřížkou z nerezové oceli 138x138 mm. Pro napojení na systémy fóliových hydroizolací. HL64B HL64.1B
HL64BF
183,186,-
DN75, bez el. ohřevu.....................................................................................................................................................................3829,- DN75, s el. ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu............................................ 7419,- DN110, bez el. ohřevu...................................................................................................................................................................3829,- DN110, s el. ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu.......................................... 7419,-
4594,- s DPH 8903,- s DPH 4594,- s DPH 8903,- s DPH
Střešní vtok pro pochůzné střechy s ležatým odtokem DN 75/110, tepelně izolovaný, s továrně napojenou asfaltovou izolační manžetou s mřížkou z nerezové oceli 138x138 mm HL64BH HL64.1BH
bez el. ohřevu..................................................................................................................................................................................4479,- 5375,- s DPH s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu..................................... 8308,- 9970,- s DPH
Náhradní díly HL0317.4E Redukce DN75/110 HL062B.3E Nosný kroužek
HL64F
185,164,-
222,- s DPH 197,- s DPH
HL66.9
Nástavec ø145mm s žebry/150x150mm/ 138x138mm mřížka nerez
1792,- 2151,- s DPH
Střešní vtok pro ploché střechy s ležatým odtokem DN75, DN110 tepelně izolovaný s přírubou pro přímé napojení FPO fólií se záchytným košem. K navaření na systémy FPO fóliových hydroizolací na polypropylenové bázi. Vtok je také určen pro napojení-nalepení PE parozábrany u klasicky zateplených střech. HL64F/7 HL64.1F/7 HL64F/1 HL64.1F/1
DN75, bez el. ohřevu......................................................................................................................................................................3217,- DN75, s el. ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu............................................6796,- DN110, bez el. ohřevu....................................................................................................................................................................3217,- DN110, s el. ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu..........................................6796,-
3860,- s DPH 8155,- s DPH 3860,- s DPH 8155,- s DPH
Náhradní díly HL062.1E Záchytný koš
902,- 1083,- s DPH
15
®
Odpady, sifony HL64H
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Střešní vtok pro ploché střechy s ležatým odtokem DN 75/110, tepelně izolovaný, s továrně napojenou asfaltovou izolační manžetou se záchytným košem HL64H HL64.1H
bez el. ohřevu..................................................................................................................................................................................3723,- 4468,- s DPH s elektrickým ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu......................................7428,- 8914,- s DPH
Náhradní díly HL062.1E Záchytný koš
HL64P
902,- 1083,- s DPH
Střešní vtok pro ploché střechy s ležatým odtokem DN75, DN110, tepelně izolovaný s PVC pevnou izolační přírubou se záchytným košem. Pro napojení navařením na systémy mPVC fólivých hydroizolací. HL64P/7 HL64.1P/7 HL64P/1 HL64.1P/1
DN75, bez el. ohřevu..................................................................................................................................................................... 3557,- DN75, s el. ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu............................................7260,- DN110, bez el. ohřevu................................................................................................................................................................... 3557,- DN110, s el. ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu..........................................7260,-
4268,- s DPH 8713,- s DPH 4268,- s DPH 8713,- s DPH
Náhradní díly
HL64BP
902,- 1083,- s DPH
Střešní vtok v provedení pro pochůzné střechy s ležatým odtokem DN75, DN110, tepelně izolovaný s PVC pevnou izolační přírubou s mřížkou z nerezové oceli. Pro napojení navařením na systémy mPVC fólivých hydroizolací. HL64BP/7 HL64.1BP/7 HL64BP/1 HL64.1BP/1
DN75, bez el. ohřevu.....................................................................................................................................................................4134,- DN75, s el. ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu............................................7860,- DN110, bez el. ohřevu...................................................................................................................................................................4134,- DN110, s el. ohřevem , 230V, samoregulační topný kabel, dodávka bez termostatu..........................................7860,-
Náhradní díly HL062B.3E Nosný kroužek
HL65
164,-
197,- s DPH
HL01020D Těsnící kroužek, břitový HL062.3E Příruba z nerezové oceli
92,- 110,- s DPH 1196,- 1435,- s DPH
HL01020D Těsnící kroužek, břitový
92,-
110,- s DPH
220,- s DPH 223,- s DPH
DN 125, h=300 mm........................................................................................................................................................................2581,- 3097,- s DPH
Náhradní díly HL01020D Těsnící kroužek, břitový
183,186,-
Nástavec s továrně napojenou asfaltovou izolační manžetou. Vhodný pro střešní vtoky HL62(.1)(H) a HL64(.1)(H). HL65H
HL65P
HL062.4E Křídlové matice, sada 6 ks HL062N.4E Šestihranná matice 6ks.
DN 125, h=300 mm........................................................................................................................................................................1235,- 1482,- s DPH
Náhradní díly
1792,- 2151,- s DPH
Nástavec s přírubou pro přímé napojení FPO fólií. K navaření na systémy FPO fóliových hydroizolací na polypropylenové bázi. Vhodný pro střešní vtoky HL62(.1)(H)(P) a HL64(.1)(H)(P). HL65F
HL65H
Nástavec ø145mm s žebry/150x150mm/ 138x138mm mřížka nerez
DN 125, h=300 mm........................................................................................................................................................................ 2327,- 2792,- s DPH
Náhradní díly
HL66.9
4961,- s DPH 9432,- s DPH 4961,- s DPH 9432,- s DPH
Nástavec s pevnou izolační přírubou, s izolační svorkou a křídlovými maticemi z nerezové oceli. Vhodný pro střešní vtoky HL62(.1)(H) a HL64(.1)(H). K napojení na systémy fóliových hydroizolací. HL65
HL65F
www.hl.blucina.net
HL062.1E Záchytný koš
92,-
110,- s DPH
Nástavec s PVC pevnou izolační přírubou. Pro napojení navařením na systémy mPVC fólivých hydroizolací.Vhodný pro: HL 62(.1)(H)(P) a HL 64(.1)(H)(P) HL65P
DN 125, h=300 mm........................................................................................................................................................................ 2327,- 2792,- s DPH
Náhradní díly HL01020D Těsnící kroužek, břitový
HL66
92,-
110,- s DPH
Nástavec s rámem z nerezové oceli s připevněnou mřížkou 138x138 mm z nerezové oceli. Vhodný pro střešní vtoky HL62(.1)B(H) a HL64(.1) B(H) a podlahové vpusti HL72(.1)(K)(H), HL317(K)(H)(N), třída zatížení L15 (1500 kg) HL66
ø145mm,h= 205mm......................................................................................................................................................................5585,- 6702,- s DPH
Náhradní díly HL066.1E Vtoková mřížka z nerezové oceli V4A 138x138mm, s otvory pro šrouby
16
2770,- 3324,- s DPH
HL066.3E Nástavec ø145mm/150mm s rámem z nerezové oceli V2A 150x150mm se závity pro šrouby
3257,- 3908,- s DPH
®
Odpady, sifony HL66.1
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Nástavec s rámem z nerezové oceli s připevněnou mřížkou a s protiskluznou úpravou povrchu mřížky, třída zatížení L15 (1500 kg) HL66.1
ø145 mm, h= 205mm.................................................................................................................................................................15404,- 18484,- s DPH
Náhradní díly HL066.2E Vtoková mřížka z nerezové oceli V4A 138x138mm s otvory pro šrouby a protiskluzovou úpravou 12486,- 14983,- s DPH
HL66.3
HL066.3E Nástavec ø145mm/150mm s rámem z nerezové oceli V2A 150x150mm se závity pro šrouby 3257,- 3908,- s DPH
Hladký nástavec s plastovým rámem a mřížkou z nerezové oceli HL66.3
ø145 mm............................................................................................................................................................................................1568,- 1881,- s DPH
Náhradní díly HL0317.1E Vtoková mřížka z nerezové oceli 138x138 mm 1005,- 1206,- s DPH HL0317.2E Nástavec ø145mm/90mm/150x150mm 468,- 561,- s DPH
HL66.4
Hladký nástavec s plastovým rámem a mřížkou z plastu HL66.4
ø145 mm............................................................................................................................................................................................1280,- 1536,- s DPH
Náhradní díly HL0317.2E Nástavec ø145mm/90mm/150x150mm
HL66.8
468,-
561,- s DPH
HL072.1E Vtoková mřížka z plastu 138x138 mm
615,-
738,- s DPH
Žebrovaný nástavec s plastovým rámem 150x150mm a mřížkou z plastu 138x138mm HL66.8
ø145 mm.............................................................................................................................................................................................1147,- 1377,- s DPH
Náhradní díly HL062B.2E Nástavec ø145mm/90mm/150x150mm HL066.4E O-kroužek 135x2,5mm
HL66.9
468,58,-
561,- s DPH 69,- s DPH
HL072.1E Vtoková mřížka z plastu 138x138 mm HL062B.3E Nosný kroužek
615,164,-
738,- s DPH 197,- s DPH
Žebrovaný nástavec s plastovým rámem 148x148 a mřížkou z nerezové oceli 138x138mm HL66.9
ø145 mm............................................................................................................................................................................................1792,- 2151,- s DPH
Náhradní díly HL0317.1E Vtoková mřížka z nerezové oceli 138x138 mm HL062B.2E Nástavec ø145mm/90mm/150x150mm
HL66P
1005,- 1206,- s DPH 468,- 561,- s DPH
HL062B.3E Nosný kroužek
164,-
197,- s DPH
Nástavec s mřížkou 138x138 mm z nerezové oceli s rámem pro přilepení PVC podlahových krytin. Vhodný pro HL72(.1)(H), HL317(H)(K)(N) HL66P
ø145mm, h= 88mm.......................................................................................................................................................................1568,- 1881,- s DPH
Náhradní díly HL0317.1E Vtoková mřížka z nerezové oceli 138x138 mm
HL66Q
1005,- 1206,- s DPH
HL066P.1E Nástavec ø145mm/88mm/s PVC límcem 206x206mm
468,-
561,- s DPH
Nástavec s rámem z nerezové oceli s mřížkou Quadra 138x138mm, vhodný pro HL317(K)(N)(H) HL66Q
ø145mm, h= 55mm.......................................................................................................................................................................6943,- 8332,- s DPH
Náhradní díly HL066Q.1E Vtoková mřížka z nerezové oceli V4A QUADRA 138x138mm
HL67
5249,- 6299,- s DPH
HL066Q.3E Nástavec ø145mm/150mm s rámem z nerezové oceli V2A 150x150mm
2211,- 2654,- s DPH
Nástavec s rámem a mřížkou ø145 mm z nerezové oceli Vhodný pro HL62(.1)B(H), HL64(.1)B(H, HL72(.1)(H), HL317(H)(N), třída zatížení K3 (300 kg) HL67
ø145mm, h= 150mm..................................................................................................................................................................... 4617,- 5541,- s DPH
Náhradní díly HL067.1E Vtoková mřížka z nerezové oceli kruhová ø145 mm
HL69
3042,- 3650,- s DPH
HL067.2E Nástavec ø145mm/150mm/rámeček z nerezové oceli ø155mm
1465,- 1758,- s DPH
Renovační střešní vtok DN 75, 110, 125, 160 s izolační svorkou a křídlovými maticemi z nerezové oceli, záchytný koš. Pro napojení na systémy fóliových hydroizolací. HL69/DN
. .............................................................................................................................................................................................................3449,- 4139,- s DPH
Náhradní díly HL062.1E Záchytný koš HL062.3E Příruba z nerezové oceli
902,- 1083,- s DPH 1196,- 1435,- s DPH
HL062.4E Křídlové matice, sada 6 ks HL062N.4E Šestihranná matice 6ks.
183,186,-
220,- s DPH 223,- s DPH
17
®
Odpady, sifony HL69B
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Renovační střešní vtok DN 75, 110, 125, 160 s izolační svorkou a křídlovými maticemi z nerezové oceli, s nástavcem a mřížkou z nerezové oceli 138 x 138 mm. Pro napojení na systémy fóliových hydroizolací. HL69B/DN
. .............................................................................................................................................................................................................4201,- 5042,- s DPH
Náhradní díly HL062.3E Příruba z nerezové oceli HL062.4E Křídlové matice, sada 6 ks HL062N.4E Šestihranná matice 6ks.
HL69BH
1196,- 1435,- s DPH 183,- 220,- s DPH 186,- 223,- s DPH
HL062B.3E Nosný kroužek HL66.9 Nástavec ø145mm s žebry/150x150mm/ 138x138mm mřížka nerez
164,-
197,- s DPH
1792,- 2151,- s DPH
Renovační střešní vtok DN 75, 110, 125, 160 s izolační svorkou a křídlovými maticemi z nerezové oceli, s nástavcem a mřížkou z nerezové oceli 138 x 138 mm, s továrně napojenou asfaltovou izolační manžetou HL69BH/DN
. ............................................................................................................................................................................................................ 5066,- 6079,- s DPH
Náhradní díly
HL69H
164,-
197,- s DPH
HL66.9
. ............................................................................................................................................................................................................. 4287,- 5144,- s DPH
Náhradní díly HL062.1E Záchytný koš
902,- 1083,- s DPH
Renovační střešní vtok DN75, 110, 125, 160 s PVC pevnou izolační přírubou se záchytným košem. Pro napojení navařením na systémy mPVC fólivých hydroizolací. HL69P/DN
. .............................................................................................................................................................................................................3449,- 4139,- s DPH
Náhradní díly HL062.1E Záchytný koš
HL69BP
902,- 1083,- s DPH
Renovační střešní vtok DN75, 110, 125, 160 v provedení pro pochůzné střechy s PVC pevnou izolační přírubou s nerezovou vtokovou mřížkou. Pro napojení navařením na systémy mPVC fólivých hydroizolací. HL69BP/DN
. .............................................................................................................................................................................................................4201,- 5042,- s DPH
Náhradní díly HL062B.3E Nosný kroužek
HL70
164,-
197,- s DPH
HL66.9
DN 75/110......................................................................................................................................................................................... 2604,- s rámem a mřížkou z litiny třída zatížení L15 (1500 kg)....................................................................................................3575,- těleso podlahové vpusti . ...........................................................................................................................................................1948,- s kruhovou vtokovou krytkou ø112mm a kruhovým rámem z nerezové oceli......................................................3052,-
Náhradní díly HL37N HL39G
Nástavec ø145mm s žebry/150x150mm/138x138mm mřížka nerez 1792,- 2151,- s DPH
Podlahová vpust s ležatým odtokem DN75/110 se zpětnou armaturou proti vzduté vodě a nouzovým uzávěrem, se třemi bočními přívody přívody DN40/50, se vtokovou mřížkou z nerezové oceli 115x115 mm s nástavcem s plastovým rámem 123 x 123 mm, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. Dle ČSN EN 13564-1, typ 4. HL70 HL70G HL70K HL70R
HL71
1792,- 2151,- s DPH
Renovační střešní vtok DN 75, 110, 125, 160 s továrně napojenou asfaltovou izolační manžetou, záchytný koš HL69H/DN
HL69P
Nástavec ø145mm s žebry/150x150mm/ 138x138mm mřížka nerez
www.hl.blucina.net
HL062B.3E Nosný kroužek
Plastový nástavec ø110mm s vtokovou mřížkou z nerezové oceli 115x115mm Plastový nástavec ø110 mm s rámem 150x150mm i mřížkou z litiny 137x137 mm
545,-
654,- s DPH
1390,- 1668,- s DPH
HL38N
Plastový nástavec ø110mm s kruhovým rámem ø133mm a vtokovou krytkou z nerezové oceli ø112mm HL070.3E Uzávěr proti vzduté vodě komplet HL070.4E Čistící šroub HL0317.4E Redukce DN 110xDN 75
3125,- s DPH 4290,- s DPH 2337,- s DPH 3662,- s DPH
1119,- 1342,- s DPH 586,- 703,- s DPH 110,- 132,- s DPH 185,- 222,- s DPH
Podlahová vpust (sklepní) s ležatým odtokem DN110 s plastovou mříží, s rámem 170x240 mm a košem nečistoty HL71 HL71G
DN 110, třída zatížení K3 (300kg)..............................................................................................................................................1686,- 2023,- s DPH jako HL71, avšak s litinovou vtokovou mřížkou, třída zatížení L15 (1500kg)...........................................................2714,- 3257,- s DPH
Náhradní díly HL071.1E Plastová vtoková mřížka 155x225 mm HL071.2E Litinová vtoková mřížka 155x225mm HL071.3E Košík na nečistoty
18
253,- 304,- s DPH 1412,- 1695,- s DPH 444,- 533,- s DPH
HL071.4E Čistící šroub HL071.5E Nástavec k objednání jako příslušenství
123,- 147,- s DPH 1002,- 1203,- s DPH
®
Odpady, sifony HL71.1
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Podlahová vpust (sklepní) s ležatým odtokem DN110 s plastovou mříží a přítokem DN50 nebo DN75 s rámem 170x240 mm a košem na nečistoty HL71.1/50 HL71.1/7
DN110, třída zatížení K3 (300kg) s přítokem DN50............................................................................................................2595,- 3113,- s DPH DN110, třída zatížení K3 (300kg) s přítokem DN75............................................................................................................2595,- 3113,- s DPH
Náhradní díly HL071.1.1E Připojovací hrdlo DN 75 HL071.1.2E Připojovací hrdlo DN 50 HL071.1E Plastová vtoková mřížka 155x225 mm
HL72
935,- 1122,- s DPH 935,- 1122,- s DPH 253,- 304,- s DPH
HL071.3E Košík na nečistoty 444,- 533,- s DPH HL071.4E Čistící šroub 123,- 147,- s DPH HL071.5E Nástavec k obj. jako příslušenství, H=100 mm 1002,- 1203,- s DPH
Podlahová vpust s ležatým odtokem 110, se zápachovou uzávěrkou 60mm. Plastová vtoková mříž 138 x 138 mm, s nástavcem a plastovým rámem 150 x 150mm, s možností výškové úpravy se sítkem na nečistoty. HL72 HL72N HL72N/7
DN110, třída zatížení K3 (300kg)............................................................................................................................................... 1519,- 1823,- s DPH jako HL72, avšak s nerezovou vtokovou mřížkou..............................................................................................................1845,- 2214,- s DPH jako HL72N, avšak DN75..............................................................................................................................................................1845,- 2214,- s DPH
Náhradní díly HL66.9
Plastový nástavec ø145mm s žebry/150x150mm/ 138x138mm mřížka nerez 1792,- 2151,- s DPH HL66.8 Plastový nástavec ø145mm s žebry/150x150mm/ 138x138mm mřížka plast 1147,- 1377,- s DPH HL0317.5E Sítko 110,- 132,- s DPH
HL72.1
HL72K/1 HL72K/7 HL072.3E HL071.4E
Těleso podlahové vpusti DN 75 Těleso podlahové vpusti DN100 Sifonová vložka komplet Čistící šroub
433,433,343,123,-
519,- s DPH 519,- s DPH 412,- s DPH 147,- s DPH
Podlahová vpust s ležatým odtokem DN75/110 s pevnou izolační přírubou, se zápachovou uzávěrkou 60mm. Plastová vtoková mříž 138 x 138 mm, s nástavcem a plastovým rámem 150 x 150mm, s možností výškové úpravy se sítkem na nečistoty. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 84. HL72.1 HL72.1H HL72.1HN HL72.1N
DN75/110, třída zatížení K3 (300kg)....................................................................................................................................... 2048,- jako HL72.1, avšak s továrně napojenou asfaltovou izolační manžetou.................................................................. 3946,- jako HL72.1H, avšak s vtokovou mřížkou z nerezové oceli.............................................................................................4364,- jako HL72.1, avšak s vtokovou mřížkou z nerezové oceli................................................................................................2390,-
2457,- s DPH 4735,- s DPH 5237,- s DPH 2868,- s DPH
Náhradní díly HL0317.5E Sítko 110,- 132,- s DPH HL66.4 Plastový nástavec ø145mm hladký /150x150mm/138x138 mm mřížka plast 1280,- 1536,- s DPH HL072.3E Sifonová vložka komplet 343,- 412,- s DPH
HL72.1K
123,185,597,-
147,- s DPH 222,- s DPH 717,- s DPH
Těleso vpusti HL72.1 s ležatým odtokem DN75/110 s pevnou izolační přírubou. Zápachová uzávěrka 60 mm. Vhodné nástavce HL66(.1). HL72.1K HL72.1KH
HL73Pr
HL071.4E Čistící šroub HL0317.4E Redukce DN110/DN75 HL01059D Těsnící manžeta 172x145mm k tělesu vtoku
DN75/110...........................................................................................................................................................................................1664,- 1997,- s DPH jako HL72.1K, avšak továrně napojeným živičnými zolačním pásem........................................................................ 3551,- 4262,- s DPH
Zásuvná podlahová vpust “PRIMUS” vhodná pro zasunutí do potrubí DN110 bez hrdla v podlahách bez vodotěsných izolací HL73Pr
DN110..................................................................................................................................................................................................2216,- 2659,- s DPH
Náhradní díly HL073.1E Zápachová uzávěrka Primus HL037Pr.1E Vtoková mřížka PRIMUS z nerezové oceli 115x115mm
HL77
427,-
513,- s DPH
335,-
402,- s DPH
Podlahová vpust (sklepní) s ležatým odtokem DN110 s trojnásobnou zpětnou armaturou proti vzduté vodě (2x automatická, 1x nouzový), s plastovou vtokovou mřížkou 180 x 125 mm, revizním poklopem a lapačem nečistot. Dle ČSN EN 13564-1, typ 5. HL77 HL77.1
DN 110, třída zatížení K3 (300 kg).............................................................................................................................................6837,- 8205,- s DPH jako HL77, avšak s bočním přítokem DN 50, třída zatížení K3 (300kg)......................................................................8312,- 9975,- s DPH
Náhradní díly HL077.1E Plastová vtoková mřížka 2-dílná 180x125 mm HL077.2E Košík na nečistoty HL077.3E Kopletní vnitřní vložka HL077.4E Připojovací sada DN 50 k HL77(.1)
1156,- 1387,- s DPH 268,- 321,- s DPH 5909,- 7091,- s DPH 863,- 1036,- s DPH
HL077.5E Nástavec k HL77(.1) k obj. jako příslušenství h=100 mm HL077.6E Sada těsnění k HL77(.1)
1244,- 1493,- s DPH 1244,- 1493,- s DPH
19
®
Odpady, sifony HL80
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Balkonový a terasový vtok s variabilním odtokem DN50/75 s pevnou izolační přírubou, se suchou klapkou proti pronikání zápachu (nezámrzná), s mřížkou 115x115 mm z nerezové oceli a nástavcem s plastovým rámem 123 x 123 mm s možností výškové úpravy. Odtok s plynule nastavitelným sklonem od 0 - 90° (kulový kloub). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL80 HL80C HL80CK HL80CR HL80H HL80HK HL80HR HL80K HL80R
DN 50/75, třída zatížení K3 (300 kg)........................................................................................................................................1556,- jako HL80, avšak s límcem s polymerbetonu ”Cera Drain”, pro stěrkové-kontaktní hydroizolace a epoxidové nátěry podlah........................................................................................................................................................7235,- těleso vtoku ”Cera Drain”............................................................................................................................................................6310,- jako HL80C s kruhovým rámem a vtokovou krytkou z nerezové oceli.....................................................................7670,- jako HL80, avšak s továrně napojenou asfaltovou izolační manžetou......................................................................2807,- těleso vtoku s továrně napojenou asfaltovou izolační manžetou..............................................................................1970,- jako HL80H, avšak s kruhovým rámem a vtokovou krytkou z nerezové oceli ø112mm.....................................3251,- těleso vtoku........................................................................................................................................................................................650,- jako HL80, avšak s kruhovým rámem a vtokovou krytkou z nerezové oceli ø112mm........................................2009,-
1868,- s DPH 8682,- s DPH 7572,- s DPH 9204,- s DPH 3368,- s DPH 2364,- s DPH 3901,- s DPH 780,- s DPH 2410,- s DPH
Náhradní díly HL080.4E Klapka komplet HL37N Plastový nástavec ø110mm s vtokovou mřížkou 115x115mm k HL80(H)(C)
HL80.1
281,-
337,- s DPH
545,-
654,-
HL38N
s DPH
Plastový nástavec ø110mm s kruhovým rámem ø133mm a vtokovou krytkou z nerezové oceli ø112mm
1119,- 1342,- s DPH
Podlahová vpust s variabilním odtokem DN50/75, s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s mřížkou 115x115 mm z nerezové oceli a nástavcem s plastovým rámem 123 x 123 mm, s možností výškové úpravy. Odtok s plynule nastavitelným sklonem od 0 - 90° (kulový kloub). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL80.1 HL80.1C HL80CK HL80.1CR HL80.1H HL80HK HL80.1HR HL80K HL80.1R
DN 50/75, třída zatížení K3 (300 kg)........................................................................................................................................1556,- jako HL80.1, avšak s límcem s polymerbetonu ”Cera Drain”, pro stěrkové-kontaktní hydroizolace a epoxidové nátěry podlah........................................................................................................................................................7235,- těleso vtoku ”Cera Drain”............................................................................................................................................................6310,- jako HL80.1C s kruhovým rámem a vtokovou krytkou z nerezové oceli ø112mmi...............................................7670,- jako HL80.1, avšak s továrně napojenou asfaltovou izolační manžetou...................................................................2807,- těleso vtoku továrně napojenou asfaltovou izolační manžetou.................................................................................1970,- jako HL80.1H, avšak s kruhovým rámem a vtokovou krytkou z nerezové oceli ø112mm..................................3251,- těleso vtoku........................................................................................................................................................................................650,- jako HL80.1, avšak s kruhovým rámem a vtokovou krytkou z nerezové oceli ø112mm.....................................2009,-
1868,- s DPH 8682,- s DPH 7572,- s DPH 9204,- s DPH 3368,- s DPH 2364,- s DPH 3901,- s DPH 780,- s DPH 2410,- s DPH
Náhradní díly HL080.5E Sifonová vložka komplet HL080.9E Zvonek sifonu HL37N Plastový nástavec ø110mm s vtokovou mřížkou 115x115mm
HL80.2
281,123,-
337,- s DPH 147,- s DPH
545,-
654,- s DPH
HL38N
Plastový nástavec ø110mm s kruhovým rámem ø133mm a vtokovou krytkou z nerezové oceli ø112mm
1119,- 1342,- s DPH
Podlahová vpust s variabilním odtokem DN50/75 pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 30 mm), s přepadovou trubkou HL515 100 mm. Pohledové díly - těsnící víčko a rámeček z bílého plastu, plexi přepadová trubice HL515 (k dodání v délkách po 1 mm). Odtok s plynule nastavitelným sklonem od 0 - 90° (kulový kloub). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL80.2 HL80.2H
DN 50/75............................................................................................................................................................................................1540,- 1848,- s DPH jako Hl 80.2, avšak s továrně napojenou asfaltovou izolační manžetou.................................................................. 2737,- 3284,- s DPH
Náhradní díly HL080.2ENWE Plastový nástavec ø110 mm /92mm/ 100x100 mm, bílý včetně O-kroužku HL01067D O-kroužek 92x4 mm
HL80.3
263,25,-
315,- s DPH 30,- s DPH
HL080.6E Sifonová vložka komplet pro HL80.2(H) HL080.7E Těsnící víčko pod přepadovou trubku HL515 Přepadová trubka z plexiskla 100mm x 6/4”
281,300,255,-
337,- s DPH 360,- s DPH 307,- s DPH
Střešní vtok s variabilním odtokem DN50/75 s pevnou izolační přírubou, odtok s plynule nastavitelným sklonem od 0 - 90° (kulový kloub) a se záchytným košem. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL80.3 HL80.3H
DN 50/75............................................................................................................................................................................................1505,- 1806,- s DPH jako HL80.3, avšak s továrně napojenou asfaltovou izolační manžetou..................................................................2702,- 3242,- s DPH
Náhradní díly HL080.8E Záchytný koš
HL81G
545,-
654,- s DPH
Balkonový a terasový vtok (do pojížděných ploch) s variabilním odtokem DN50/75 , se suchou klapkou proti pronikání zápachu (nezámrzná), s rámem 150x150mm a vtokovou mřížkou z litiny137x137mm s nástavcem s možností výškové úpravy. Odtok s plynule nastavitelným sklonem od 0 – 90, (kulový kloub). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL81G HL81GH
třída zatížení L15 (1500 kg).......................................................................................................................................................... 2427,- 2912,- s DPH jako HL81G, a však s továrně napojenou asfaltovou izolační manžetou................................................................. 3646,- 4375,- s DPH
Náhradní díly HL080.4E Klapka komplet
20
281,-
337,- s DPH
HL39G
Plastový nástavec ø110 mm s rámem 150x150mm i mřížkou z litiny 137x137 mm
1390,- 1668,- s DPH
®
Odpady, sifony HL81.1G
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Podlahová vpust (do pojížděných ploch) s variabilním odtokem DN50/75, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s rámem 150x150mm a vtokovou mřížkou z litiny137x137mm s nástavcem s možností výškové úpravy. Odtok s plynule nastavitelným sklonem od 0 – 90, (kulový kloub). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL81.1G HL81.1GH
třída zatížení L15 (1500 kg).......................................................................................................................................................... 2427,- 2912,- s DPH Jako HL81.1G, avšak s továrně napojenou asfaltovou izolační manžetou.............................................................. 3646,- 4375,- s DPH
Náhradní díly HL080.5E Sifonová vložka HL080.9E Zvonek sifonu
HL82
337,- s DPH 147,- s DPH
HL39G
Plastový nástavec ø110 mm s rámem 150x150mm i mřížkou z litiny 137x137 mm 1390,- 1668,- s DPH
Vyhřívací sada vhodná pro serii odtoků HL80 složená z: samoregulované topné tělěso 18W/230 V, samolepící tepelně vodivá hliníková páska, připevňovací a izolační materiál. Montážní návod: těleso vtoku důkladně očistěte, část tepelně vodivé pásky (50 mm x 10 m) omotejte kolem tělesa vtoku, omotejte paralelní topný pás (18 W/m, 230 V) a upevněte pomocí fixační svorky. Omotejte zbytkem tepelně vodivé pásky. Na závěr naviňte kolem tělesa vpusti tepelně izolační pásku (pěnovka 6 x 40 x 2000 mm). Poté vtok nainstalujte do stavebního otvoru a napojte na odtokový systém. Zafixujte těleso vtoku montážní pěnou. Elektrické připojení proveďte podle návodu na konci ceníku nebo na www.hl.blucina.net HL82
HL83
281,123,-
…..230V, samoregulační topný pás, dodávka bez termostatu.....................................................................................4750,- 5700,- s DPH
Izolační souprava složení: volná příruba z nerezové oceli, těsnící kroužek, šrouby, EPDM fólie 400 x 400 mm (čtvercový tvar). Vhodná pro HL70, serii HL80, HL90, HL92, HL300, HL304, HL310N, HL510N. HL83 HL83.0 HL83.B HL83.H HL83.M HL83.P HL83.PP
s EPDM fólií.......................................................................................................................................................................................1083,- jako HL83, avšak bez fólie, pro běžné fóliové hydroizolace............................................................................................726,- jako HL83, avšak s olověnou fólií.............................................................................................................................................1083,- jako HL83, avšak s továrně nataveným živičným pásem................................................................................................2154,- jako HL83, avšak s montaplast B- fólií, pro stěrkové-kontaktní hydroizolace........................................................1083,- Izolační souprava s PVC přírubou d=287 mm pro navaření mPVC foliových hyroizolací...................................1083,- Izolační souprava s PP přírubou d=287 mm pro navaření FPO foliových hyroizolací......................................... 1109,-
1299,- s DPH 871,- s DPH 1299,- s DPH 2584,- s DPH 1299,- s DPH 1299,- s DPH 1331,- s DPH
Náhradní díly HL01023D HL083.1E HL083.2E HL083.3E
HL84
Pryžové těsnění 180x6mm Šrouby 6,3x19mm (6 Ks) Příruba z nerezové oceli 200x115mm EPDM-fólie ø500mm
234,50,506,329,-
281,- s DPH 61,- s DPH 607,- s DPH 394,- s DPH
HL083.4E Montaplast-fólie čtv.500mm HL083.6E Olověná fólie ø500mm HL083.P0E PVC příruba ø287mm HL083.H1E Šrouby 6,3x22mm (6 Ks)
329,342,816,50,-
394,- s DPH 410,- s DPH 979,- s DPH 61,- s DPH
Izolační souprava složení :volná příruba z nerezové oceli (svorka), svorné těsnění, distanční kroužek nástavce, EPDM fólie 500x500 mm (čtvercový tvar). Vhodná pro HL72.1(K)(N), HL317(K)(N), HL350.1 (je součástí balení). HL84 HL84.0 HL84.M
s EPDM fólií.......................................................................................................................................................................................1365,- 1638,- s DPH jako HL84, avšak bez fólie, pro běžné fóliové hydroizolace..........................................................................................1365,- 1638,- s DPH jako HL84, avšak s montaplast B- fólií pro stěrkové-kontaktní hydroizolace........................................................1818,- 2182,- s DPH
Náhradní díly HL062B.3E Nosný kroužek HL084.2E Příruba z nerezové oceli 220x155mm HL084.3E EPDM-Folie čtv. 500mm
HL84.CU
164,- 197,- s DPH 1196,- 1435,- s DPH 430,- 515,- s DPH
HL084.4E Svorné těsnění HL084.5E Montaplast-Folie čtv.500mm
229,430,-
274,- s DPH 515,- s DPH
Izolační souprava z měděného plechu (CU) pro střešní vtoky serie HL62, HL64, HL 65, s 2x plochým přírubovým těsněním. Pro jiné plechové krytiny poskytneme výkresovou dokumentaci nebo ji najdete na www.hl.blucina.net HL84.CU HL84.E HL84.H
měděný plech.................................................................................................................................................................................. 5171,- 6205,- s DPH pozinkovaný ocelový plech.......................................................................................................................................................3631,- 4357,- s DPH izolační souprava s továrně napojenou asfaltovou izolační manžetou a plochým přírubovým těsněním, určena pro dodatečné napojení asfatových hydroizolací (parotěsných zábran) na střešní vtoky se svěrnou přírubou serie HL62, HL63, HL64 a HL69..................................................................................................................................................................................... 3513,- 4216,- s DPH
Náhradní díly HL084.7E Přírubové těsnění pro HL84.CU(.E) a HL84.H
HL85N
ø110 mm, h= 103mm....................................................................................................................................................................... 870,- 1044,- s DPH
Nástavec ø110mm s límcem z polymerbetonu s polyesterovou tkaninou pro stěrkové-kontaktní hydroizolace a epoxidové nátěry podlah. Vhodný pro: HL70, serii vtoků HL80, HL90, HL300, HL304, HL310N (R)(Pr)(G), HL510N (R)(Pr)(G). HL85NC
HL85NH
619,- s DPH
Nástavec ø110mm s pevnou izolační přírubo. Vhodný pro: HL70, serii HL80, HL90, HL300, HL304, HL310N (R)(Pr)(G), HL510N (R)(Pr)(G). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83 a prodloužení nástavce HL340N. HL85N
HL85NC
516,-
ø110 mm, h= 103mm.....................................................................................................................................................................6536,- 7844,- s DPH
Nástavec ø110mm s pevnou izolační přírubou a s továrně napojenou asfaltovou izolační manžetou. Vhodný pro: HL70, serii HL80, HL90, HL300, HL304, HL310N (R)(Pr)(G), HL510N (R)(Pr)(G). HL85NH
ø110 mm, h= 103mm.....................................................................................................................................................................2067,- 2481,- s DPH
Náhradní díly HL01067D O-kroužek 92x4 mm
25,-
30,- s DPH
21
®
Odpady, sifony HL86
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Izolační souprava složení: volná příruba z nerezové oceli, těsnící kroužek, šrouby, EPDM fólie 500 x 500 mm. Vhodná pro HL615(.1)(L)(W)(S), HL616(.1)(L)(W)(S) HL86 HL86.0 HL86.B HL86.H HL86.M
S EPDM fólií.......................................................................................................................................................................................1818,- jako HL86, avšak bez fólie, pro běžné fóliové hydroizolace..........................................................................................1365,- jako HL86, avšak s olověnou fólií.............................................................................................................................................1818,- jako HL86, avšak s továrně napojenou asfaltovou izolační manžetou......................................................................3643,- jako HL86, avšak s montaplast B- fólií pro stěrkové-kontaktní izolace....................................................................1818,-
2182,- s DPH 1638,- s DPH 2182,- s DPH 4372,- s DPH 2182,- s DPH
Náhradní díly HL086.0E HL086.1E HL086.2E HL086.3E
HL90
Pryžové těsnění 275x255mm Šrouby 6,3x19mm (8 Ks) Příruba z nerezové oceli 280x200mm EPDM-fólie čtv. 500mm
234,- 281,- s DPH 66,79,- s DPH 1196,- 1435,- s DPH 430,- 515,- s DPH
HL086.4E Montaplast-fólie čtv. 500mm HL086.6E Olověná-fólie čtv. 500mm HL086H.1E Šrouby (8Ks) k HL86.H
430,447,90,-
515,- s DPH 536,- s DPH 108,- s DPH
Balkonový a terasový vtok - obzvláště plochý s ležatým odtokem DN40/50 se sítkem na nečistoty. S rámem 123x123 mm a vtokovou mřížkou 115x 115 mm z nerezové oceli, s nástavcem s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL90 HL90.2 HL90K
DN 40/50..............................................................................................................................................................................................790,- 948,- s DPH jako HL 90, avšak se suchou klapkou proti pronikání zápachu - bez sítka...............................................................1003,- 1204,- s DPH těleso vtoku........................................................................................................................................................................................ 201,- 241,- s DPH
Náhradní díly HL090.0E Sítko HL090.4E Zápachová klapka kompletní
HL90Pr
91,281,-
109,- s DPH 337,- s DPH
HL37N
Plastový nástavec ø110mm/ rámeček 123x123mm/ mřížka 115x115mm
545,-
654,- s DPH
Podlahová vpust - obzvláště plochá s ležatým odtokem DN40/50 se zápachovou uzávěrkou „PRIMUS“ (30mm). S rámem 123 x 123mm s vtokovou mřížkou z nerezové oceli 115 x 115 mm, s nástavcem s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL90Pr DN 40/50............................................................................................................................................................................................1223,- 1467,- s DPH HL90Pr-3000 jako HL90Pr, avšak s rámem „KLICK - KLACK“ (121 x 121mm) pro fixaci mřížky......................................................1698,- 2038,- s DPH HL90K těleso vtoku........................................................................................................................................................................................ 201,- 241,- s DPH Náhradní díly HL37FPr
HL90PrD
Plastový nástavec ø110 mm / rámeček 123x123 mm / mřížka DESIGN PRIMUS 115 x 115 mm 905,- 1086,- s DPH
HL3000FPr Plastový nástavec pr. 110mm / rámeček 121x121mm / mřížka DESIGN PRIMUS 115x115mm 1611,- 1933,- s DPH
Podlahová vpust - obzvláště plochá s ležatým odtokem DN40 se zápachovou uzávěrkou „PRIMUS“ (30mm) a s textílií nakašírovanou izolační přírubou. S rámem 123 x 123mm s vtokovou mřížkou z nerezové oceli 115 x 115 mm, s nástavcem s možností výškové úpravy. Třída zatížení K3 (300 kg). Vtok je určen pro tenkovrstvé podlahy pro přímé napojení na vodorovné stěrkové-kontaktní hydroizolace. Přechodová manžeta (netkaná textílie s pryžovou vložkou) je v balení výrobku. min. stavební výška 70mm. Dovolený průtok 0,4l/sec. Třída zatížení K3 (300 kg). HL90PrD DN 40..................................................................................................................................................................................................1883,- 2259,- s DPH HL90PrD-3000 jako HL90PrD, avšak s rámem „KLICK - KLACK“ (121 x 121mm) pro fixaci mřížky................................................. 2566,- 3079,- s DPH HL90KD těleso vtoku s izolačním límcem nakašírovaným textílií, bez izol. manžety............................................................. 952,- 1142,- s DPH Náhradní díly HL37FPr
Plastový nástavec ø110 mm / rámeček 123x123 mm / mřížka nerezová ocel PRIMUS 115 x 115 mm 905,- 1086,- s DPH HL3000FPr Plastový nástavec pr. 110mm / rámeček nerezová ocel 121x121mm / mřížka nerezová ocel PRIMUS 115x115mm 1611,- 1933,- s DPH HL090PrD.4E Montaplast B folie 236,- 283,- s DPH
HL92
Balkonový a terasový vtok se svislým odtokem DN40, bez zápachové uzávěrky - klapky, se sítkem na nečistoty. S rámem 100 x 100mm s mřížkou 94 x 94 mm z nerezové oceli, s nástavcem s možní výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83 a prodloužení nástavce HL320.. HL92
DN 40....................................................................................................................................................................................................790,-
948,- s DPH
Náhradní díly HL080.1E Vtoková mřížka z nerezové oceli 94x94 mm HL091.2E Plastový nástavec ø89mm/50mm/100x100mm
22
486,-
583,- s DPH
263,-
315,- s DPH
HL091.3E Sítko
91,-
109,- s DPH
®
Odpady, sifony HL98
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Čistící tvarovka s hladkým koncem DN 110 na plastová potrubí, pohledové krycí dvířka a rámeček 150x150 mm nerezová ocel. Jednoduchý přístup do potrubí přes rychlouzávěr- těsný do 0,5 bar. Jak do stěny , tak do podlahy !!! HL98
třída zatížení K3 (300 kg)............................................................................................................................................................. 4751,- 5702,- s DPH
Náhradní díly HL098.1E Rychlouzávěr k HL98 a 98SML
HL98SML
HL098.2E Šrouby (2ks)
27,-
32,- s DPH
třída zatížení K3 (300 kg).............................................................................................................................................................5593,- 6711,- s DPH
Zvukově izolační element a zároveň fixační prvek pro uložení podlahových vpustí. Je určen pro podlahové vpusti a terasové vtoky serie: HL90(Pr), HL90PrD, HL300, HL304, HL510N(Pr) a HL5100(Pr). HL99
HL100
989,- s DPH
Čistící tvarovka s hladkým koncem a mnohabřitým těsněním pro připojení na SML litinová potrubí (bez hrdel), pohledové krycí dvířka a rámeček 150x150 mm nerezová ocel. Jednoduchý přístup do potrubí přes rychlouzávěr - těsný do 0,5 bar. Jak do stěny, tak do podlahy !!! HL98SML
HL99
824,-
. ...............................................................................................................................................................................................................485,-
582,- s DPH
Dřezová zápachová uzávěrka 6/4” s přípojkou pro spotřebiče se zpětným uzávěrem a s kulovým kloubem na odtoku. Zápachová uzávěrka 70 mm. HL100/40 HL100/50
DN 40.................................................................................................................................................................................................... 423,- DN 50.................................................................................................................................................................................................... 423,-
508,- s DPH 508,- s DPH
Náhradní díly HL0100.1E HL0100.2E HL0100.3E HL01005D HL01008D
HL100G
Oblouk sifonu Odtokový oblouk DN 40 Odtokový oblouk DN 50 Klínové těsnění K 40 černé Klínové těsnění K 40 bílé
196,196,196,48,21,-
235,- s DPH 235,- s DPH 235,- s DPH 58,- s DPH 25,- s DPH
HL01034D HL01035D HL01047D HL01048D HL13/40
Klouzavý kroužek DN 40 Klouzavý kroužek DN 50 Převlečná matice 6/4” Převlečná matice 2” Zásuvná trubka DN 40 s přípojkou pro pračku
12,12,58,76,197,-
15,- s DPH 15,- s DPH 69,- s DPH 91,- s DPH 236,- s DPH
Dřezová zápachová uzávěrka 6/4”, s kulovým kloubem na odtoku. Zápachová uzávěrka 70 mm. HL100G/40 HL100G/50
DN 40.....................................................................................................................................................................................................351,- DN 50.....................................................................................................................................................................................................351,-
421,- s DPH 421,- s DPH
Náhradní díly HL0100.1E HL0100.2E HL0100.3E HL01005D HL01008D
HL126
Oblouk sifonu Odtokový oblouk DN 40 Odtokový oblouk DN 50 Klínové těsnění K 40 černé Klínové těsnění K 40 bílé
196,196,196,48,21,-
235,- s DPH 235,- s DPH 235,- s DPH 58,- s DPH 25,- s DPH
HL01034D HL01035D HL01047D HL01048D HL13G/40
Klouzavý kroužek DN 40 Klouzavý kroužek DN 50 Převlečná matice 6/4” Převlečná matice 2” Zásuvná trubka DN 40
12,12,58,76,141,-
15,- s DPH 15,- s DPH 69,- s DPH 91,- s DPH 169,- s DPH
Dřezová zápachová uzávěrka 6/4“ pro úsporu místa s přípojkou pro spotřebiče se zpětným uzávěrem. Pro kuchyňské linky a nábytkové podstavby. S kulovým kloubem na odtoku. Zápachová uzávěrka 70 mm. HL126/40 HL126/50
DN40x6/4”...........................................................................................................................................................................................649,- DN50x6/4” . ........................................................................................................................................................................................649,-
779,- s DPH 779,- s DPH
Náhradní díly HL0126.1E ”Prostor šetřící” rameno odtoku DN40x6/4” HL01002D Ploché těsnění 6/4” HL025U.2E Koleno DN40x6/4” HL01008D Klínové těsnění K 40 bílé
HL126.2
164,12,185,21,-
197,- s DPH 15,- s DPH 222,- s DPH 25,- s DPH
HL01047D Převlečná matice 6/4” HL100/40 Zápachová uzávěrka 6/4” DN 40 HL100/50 Zápachová uzávěrka 6/4” DN 50
58,423,423,-
69,- s DPH 508,- s DPH 508,- s DPH
Zápachová uzávěrka 6/4“pro dvoudílný dřez pro úsporu místa s přípojkou pro spotřebiče se zpětným uzávěrem. Pro kuchyňské linky a nábytkové podstavby. S kulovým kloubem na odtoku. Zápachová uzávěrka 70 mm. HL126.2/40 HL126.2/50
DN40x6/4”......................................................................................................................................................................................... 1037,- 1245,- s DPH DN50x6/4” . ...................................................................................................................................................................................... 1037,- 1245,- s DPH
Náhradní díly HL0126.1E HL01002D HL022.1E HL01008D
”Prostor šetřící” rameno odtoku DN40x6/4” Ploché těsnění 6/4” T-kus DN40x6/4” Klínové těsnění K 40 bílé
164,12,234,21,-
197,- s DPH 15,- s DPH 281,- s DPH 25,- s DPH
HL01047D Převlečná matice 6/4” HL100/40 Zápachová uzávěrka 6/4” DN 40 HL100/50 Zápachová uzávěrka 6/4” DN 50
58,423,423,-
69,- s DPH 508,- s DPH 508,- s DPH
23
®
Odpady, sifony HL130
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Pisoárová zápachová uzávěrka s připojovací manžetou a krycí růžicí odtoku HL130/30 HL130/40
DN 32.................................................................................................................................................................................................... 729,- DN 40.................................................................................................................................................................................................... 729,-
875,- s DPH 875,- s DPH
Náhradní díly HL01007D HL01024D HL01036D HL0130.1E
HL132
Klínové těsnění T30 Pryžová manžeta 88x43mm Těsnění k tělesu sifonu 53x2,5mm Zásuvná trubice
21,85,33,152,-
25,- s DPH 103,- s DPH 40,- s DPH 183,- s DPH
HL0130.2E HL0130.4E HL0130.3E HL0130.5E
Odpadní trubka sifonu DN32 Odpadní trubka sifonu DN40 Krycí růžice odtoku DN32 Krycí růžice odtoku DN40
143,143,76,76,-
172,- s DPH 172,- s DPH 91,- s DPH 91,- s DPH
Umyvadlová zápachová uzávěrka 5/4” s krycí růžicí odtoku HL132/30 HL132/40
DN 32....................................................................................................................................................................................................285,- DN 40....................................................................................................................................................................................................285,-
342,- s DPH 342,- s DPH
Náhradní díly HL01007D HL01036D HL0130.2E HL0130.4E
HL132.1
Klínové těsnění T30 Těsnění k tělesu sifonu 53x2,5mm Odpadní trubka sifonu DN32 Odpadní trubka sifonu DN40
21,33,143,143,-
25,- s DPH 40,- s DPH 172,- s DPH 172,- s DPH
HL0130.3E Krycí růžice odtoku DN32 HL0130.5E Krycí růžice odtoku DN40 HL13G/30 Zásuvná trubka DN 32x5/4”
76,76,141,-
91,- s DPH 91,- s DPH 169,- s DPH
Umyvadlová zápachová uzávěrka 5/4“ s přípojkou pro pračku jištěnou zpětnou klapkou a krycí růžicí odtoku HL132.1/30 HL132.1/40
DN 32.....................................................................................................................................................................................................497,- DN 40.....................................................................................................................................................................................................497,-
597,- s DPH 597,- s DPH
Náhradní díly HL01007D HL01036D HL0130.2E HL0130.4E
HL133
Klínové těsnění T30 Těsnění k tělesu sifonu 53x2,5mm Odpadní trubka sifonu DN32 Odpadní trubka sifonu DN40
21,33,143,143,-
25,- s DPH 40,- s DPH 172,- s DPH 172,- s DPH
HL0130.3E Krycí růžice odtoku DN32 HL0130.5E Krycí růžice odtoku DN40 HL13/30 Zásuvná trubka DN 32 x 5/4”s přípojkou pro pračku HL19
76,76,-
91,- s DPH 91,- s DPH
197,-
236,- s DPH
Umyvadlová zápachová uzávěrka 5/4“ s přípojkou pro pračku jištěnou zpětnou klapkou a s čistící vložkou se zátkou a otáčivým ramenem odtoku. S krycí růžicí odtoku. Zápachová uzávěrka 60 mm. HL133/30 HL133/40
DN 32....................................................................................................................................................................................................468,- DN 40....................................................................................................................................................................................................468,-
561,- s DPH 561,- s DPH
Náhradní díly HL01007D Klínové těsnění T30 HL01036D Těsnění k tělesu sifonu 53x2,5mm HL0133.1E Čistící vložka komplet
HL134
21,33,248,-
25,- s DPH 40,- s DPH 298,- s DPH
HL13/30
Zásuvná trubka DN 32 x 5/4”s přípojkou pro pračku HL19 HL8EL/30 Pružná krycí růžice DN32 HL8EL/40 Pružná krycí růžice DN40
197,91,91,-
236,- s DPH 109,- s DPH 109,- s DPH
Montážní sestava umyvadlové zápachové uzávěrky - pod omítku. Složená z: HL134.0, HL44 - montážní deska, 2 ks mosazné nástěnky 1/2” x 1/2”, HL42 - ochranné zátky HL134/40 HL134/50
DN 40..................................................................................................................................................................................................1875,- 2250,- s DPH DN 50..................................................................................................................................................................................................1875,- 2250,- s DPH
Náhradní díly HL0405.3E Mosazná nástěnka 1/2” x 1/2” HL134.0/40 Umyvadlová zápachová uzávěrka podomítková DN 40 HL134.0/50 Umyvadlová zápachová uzávěrka podomítková DN 50
HL134.0
441,-
529,- s DPH
604,-
724,- s DPH
604,-
724,- s DPH
HL42.B HL42.R HL44
Ochranná zátka 1/2”, modrá Ochranná zátka 1/2”, červená Montážní deska
49,49,272,-
59,- s DPH 59,- s DPH 326,- s DPH
Umyvadlová zápachová uzávěrka podomítková s vyjímatelnou vložkou tvořící zápachový uzávěr HL134.0/40 HL134.0/50
DN 40....................................................................................................................................................................................................604,- DN 50....................................................................................................................................................................................................604,-
724,- s DPH 724,- s DPH
Náhradní díly HL0134.1E Sifonová vložka
HL134.1C
281,-
337,- s DPH
Připojovací souprava 5/4” z chromované mosazi, výškově nastavitelná, vhodná pro HL134(.0)(.2) HL134.1C
DN 32..................................................................................................................................................................................................1422,- 1707,- s DPH
Náhradní díly HL01001D Ploché těsnění 5/4” HL01069D Klínové těsnění K30 černé HL0134.2E Odtokové koleno chrom, k HL134.1C
24
12,48,644,-
15,- s DPH 58,- s DPH 773,- s DPH
HL0134.3E Zásuvná trubka chrom, k HL134.1C HL0134.4E Krycí růžice chrom, k HL134.1C
382,225,-
459,- s DPH 269,- s DPH
®
Odpady, sifony HL134.1K
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Připojovací souprava 5/4” z plastu, barva bílá, výškově nastavitelná, vhodná pro HL134(.0)(.2) HL134.1K
DN 32....................................................................................................................................................................................................356,-
428,- s DPH
Náhradní díly HL01001D Ploché těsnění 5/4” HL01069D Klínové těsněnín K30 černé HL01046D Převlečná matice 5/4”
HL134.2
12,48,58,-
15,- s DPH 58,- s DPH 69,- s DPH
HL0134.5E Odtokové koleno DN32 k HL134.1K a HL136 HL0134.3E Krycí růžice DN32 k HL134.1K HL13G/30 Zásuvná trubka DN 32
229,382,141,-
274,- s DPH 459,- s DPH 169,- s DPH
Montážní sestava umyvadlové zápachové uzávěrky - pod omítku. Složená z: HL134.0, HL44 - montážní deska HL134.2/40 HL134.2/50
DN 40.................................................................................................................................................................................................... 870,- 1044,- s DPH DN 50.................................................................................................................................................................................................... 870,- 1044,- s DPH
Náhradní díly HL134.0/40 Umyvadlová zápachová uzávěrka podomítková DN 40
HL135
604,-
724,- s DPH
HL134.0/50 Umyvadlová zápachová uzávěrka podomítková DN 50 HL44 Montážní deska
604,272,-
724,- s DPH 326,- s DPH
Zápachová uzávěrka 5/4” k umyvadlu nebo bidetu s čistící vložkou se zátkou a otáčivým ramenem odtoku. S krycí růžicí odtoku. Zápachová uzávěrka 60 mm. HL135/30 HL135/40
DN 32....................................................................................................................................................................................................363,- DN 40....................................................................................................................................................................................................363,-
435,- s DPH 435,- s DPH
Náhradní díly HL01007D Klínové těsnění T30 HL01036D Těsnění k tělesu sifonu 53x2,5mm HL0133.1E Čistící vložka komplet
HL136N
21,33,248,-
25,- s DPH 40,- s DPH 298,- s DPH
HL13G/30 Zásuvná trubka DN 32 x 5/4” HL8EL/30 Pružná krycí růžice DN32 HL8EL/40 Pružná krycí růžice DN40
141,91,91,-
169,- s DPH 109,- s DPH 109,- s DPH
Vodní zápachová uzávěrka DN 40 pro odvod kondenzátu s přídavnou mechanickou zápachovou uzávěrkou (kulička) a čistící vložkou, se svěrným těsněním pro DN32 a násuvným těsněním pro připojení potrubí 12-18mm. Těsná proti zápachu i bez vody v zápachové uzávěrce (60mm). Tabulku pro větrací jednodky naleznete HL136N HL136.3
DN40.....................................................................................................................................................................................................895,- 1074,- s DPH jako HL136N, avšak se svislým připojením kondenzátu - zásuvná trubice s převlečnou maticí 5/4”..............895,- 1074,- s DPH
Náhradní díly HL01007D HL01036D HL01046D HL01088D
HL136.2
Klínové těsnění T30 Těsnění k tělesu sifonu 53x2,5mm Převlečná matice 5/4” Manžeta DN32x ø12 - 18 mm
21,33,58,152,-
25,- s DPH 40,- s DPH 69,- s DPH 183,- s DPH
HL0133.1E Čistící vložka komplet HL0134.5E Odtokové koleno DN32 k HL134.1K a HL136 HL13G/30 Zásuvná trubice DN32x5/4”
248,229,141,-
298,- s DPH 274,- s DPH 169,- s DPH
Vodní zápachová uzávěrka DN 40 pro odvod kondenzátu se zápachovou uzávěrkou - 280 mm (2800Pa), transparentními trubicemi pro kontrolu stavu vody a možností dopouštění vody do systému HL136.2 HL136.4/30
. ............................................................................................................................................................................................................... 750,- Jako HL 136.2 ale v DN 32, bez dopouštění vody do systému........................................................................................ 569,-
900,- s DPH 682,- s DPH
Náhradní díly HL025U.2E Koleno DN40x6/4” HL01008D Klínové těsnění K 40 bílé HL01047D Převlečná matice 6/4” HL0400.6E Čistící matice 1”
HL137
185,21,58,91,-
222,- s DPH 25,- s DPH 69,- s DPH 109,- s DPH
HL11/40 Prodlužovací koleno DN40 HL13.0/40 Zásuvná trubka DN40x6/4” transparentní s přípojkou na hadici HL19 HL13G.0/40 Zásuvná trubka DN40x6/4” transparentní
241,-
289,- s DPH
197,141,-
236,- s DPH 169,- s DPH
Umyvadlová zápachová uzávěrka 5/4“ do nábytku s ležatým odtokem. I jako varianta k umyvadlům pro tělesně postižené. Doporučená rozteč rohových ventilů při instalaci je 200 mm. HL137/30 HL137/40 HL137.1/30 HL137.1/40
DN 32....................................................................................................................................................................................................582,- DN 40....................................................................................................................................................................................................582,- ako HL137/30, avšak se svislým odtokem................................................................................................................................706,- jako HL137/40, avšak se svislým odtokem..............................................................................................................................706,-
698,- s DPH 698,- s DPH 847,- s DPH 847,- s DPH
Náhradní díly HL01007D HL01046D HL0133.1E HL0134.5E
HL138
Klínové těsnění T30 Převlečná matice 5/4” Čistící vložka komplet Odtokové koleno DN 32
21,58,248,229,-
25,- s DPH 69,- s DPH 298,- s DPH 274,- s DPH
HL0137.1E Rameno DN 32x5/4” bílé HL0137.3E Krycí růžice DN 32 bílá HL0137.2E Krycí růžice DN 40 bílá
164,85,85,-
197,- s DPH 103,- s DPH 103,- s DPH
Vodní zápachová uzávěrka DN32 pro odvod kondenzátu s přídavnou mechanickou zápachovou uzávěrkou (kulička), podomítkové provedení. Instalace možná pouze vertikálně!! Připojení potrubí s kondenzátem pr. 20-32mm, transparentní čistící vložka je vyjímatelná z podomítkového tělesa pro údržbu. Délkově upravitelná stavební ochranná zátka a kryt jsou součástí balení. HL138 HL138K
DN 32....................................................................................................................................................................................................869,- 1043,- s DPH Těleso odtoku pro zabudování 100x100x60 mm, DN 32.................................................................................................. 278,- 334,- s DPH
Náhradní díly HL0138.1E HL0138.2E HL0138.3E HL01096D HL01097D
Stavební ochranná zátka Kryt 110x110mm Sifonová vložka Násuvné těsnění (pr. 20-32mm) Násuvné těsnění k zápachovému závěru (2ks)
144,135,402,81,80,-
173,- s DPH 162,- s DPH 482,- s DPH 98,- s DPH 96,- s DPH
25
®
Odpady, sifony HL160
Ceny jsou uvedeny v Kč
Odvodňovací kroužek k HL62(.1)(B)(H), HL64(.1)(B)(H), HL 65(H) a nástavcům HL350 a HL350.1(.0)(H) HL160
HL170
ø195 mm.............................................................................................................................................................................................. 633,-
760,- s DPH
. ................................................................................................................................................................................................................657,-
789,- s DPH
ø195 mm.............................................................................................................................................................................................. 916,- 1099,- s DPH
DN 110...................................................................................................................................................................................................311,- ø90 mm................................................................................................................................................................................................ 316,-
373,- s DPH 379,- s DPH
Přímá napojovací manžeta pro záchodovou mísu HL201/1
HL202
724,- s DPH
Excentrická napojovací manžeta pro záchodovou mísu, VARIO otočné excentrické připojení (0 - 20 mm) HL200/1 HL200/90
HL201
. ...............................................................................................................................................................................................................604,-
Záchytný koš k serii vtoků Perfekt - řada HL615, 616 HL195
HL200
592,- s DPH
Plochý záchytný koš pro tělesa vtoků serie Perfekt (HL615(K), HL616(K) a nástavce HL618, HL620…. HL191
HL195
ø110 mm............................................................................................................................................................................................... 493,-
Odvodňovací kroužek k serii odtoků ”Perfekt” HL190
HL191
ø170 mm.............................................................................................................................................................................................4359,- 5231,- s DPH
Plochý záchytný koš pro tělesa balkonových a terasových vtoků serie HL80(K), HL90(K), HL310N(K), 510N(K) a nástavce HL85N, HL340N HL181
HL190
ø170 mm............................................................................................................................................................................................... 951,- 1141,- s DPH
Odvodňovací kroužek k serii HL80, HL 90 HL180
HL181
760,- s DPH
Záchytný koš z nerezové oceli k serii HL62, HL63, HL64 a HL69 HL175
HL180
ø170 mm............................................................................................................................................................................................... 633,-
Plochý záchytný koš k serii HL62, HL64, HL65 a nástavcům serie HL350 a HL350.1 HL170
HL175
HL Hutterer & Lechner GmbH
DN 110...................................................................................................................................................................................................171,-
205,- s DPH
Napojovací trubka pro záchodovou mísu s odbočkou DN50 HL202
DN 110/50............................................................................................................................................................................................582,-
698,- s DPH
Náhradní díly HL01017D O-kroužek těsnění DN 50
HL202G
21,-
25,- s DPH
248,-
298,- s DPH
Napojovací trubka pro záchodovou mísu HL202G
DN 110..................................................................................................................................................................................................398,-
Náhradní díly HL01026D Pryžová manžeta 123x80mm
26
HL01026D Pryžová manžeta 123x80mm
248,-
298,- s DPH
477,- s DPH
®
Odpady, sifony HL203
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Napojovací trubka pro záchodovou mísu - bílá a v barvách HL203/1 HL203/90
DN 110.................................................................................................................................................................................................. 479,- DN 90 ....................................................................................................................................................................................................582,-
575,- s DPH 698,- s DPH
Náhradní díly HL0203.1E Nástrčný kroužek 125x111mm HL01025D Pryžová manžeta 124x78mm k HL203
HL204
118,129,-
142,- s DPH 155,- s DPH
HL01026D Pryžová manžeta 123x80mm k HL203/90
248,-
298,- s DPH
Napojovací trubka pro záchodovou mísu - bílá, s odskokem HL204
DN 110...................................................................................................................................................................................................497,-
597,- s DPH
Náhradní díly HL0203.1E Nástrčný kroužek 125x111mm
HL205
118,-
142,- s DPH
HL01025D Pryžová manžeta 124x78mm
129,-
155,- s DPH
Napojovací koleno pro záchodovou mísu - bílé HL205
DN 110, 90°..........................................................................................................................................................................................286,-
344,- s DPH
Náhradní díly HL01025D Pryžová manžeta 124x78mm
HL209
129,-
155,- s DPH
HL0203.1E Nástrčný kroužek 125x111mm
118,-
142,- s DPH
Napojovací koleno pro záchodovou mísu - - bílé s kulovým kloubem - nastavitelné od 0 - 90°, s odtokovou trubkou ø90 mm HL209.WE HL209..
bílé....................................................................................................................................................................................................... 1387,- 1665,- s DPH barevné provedení na vyžádání........................................................................................................................................................
Náhradní díly HL0203.1E Nástrčný kroužek
HL210
118,-
142,- s DPH
HL01025D Pryžová manžeta 124x78mm
129,-
155,- s DPH
Napojovací koleno pro záchodovou mísu - bílé s kulovým kloubem - nastavitelné od 0 - 90°, barva bílá a barvy dle požadavků HL210.WE HL210… HL210P
bílé, DN 110..........................................................................................................................................................................................717,- 860,- s DPH barevné provedení na vyžádání........................................................................................................................................................ koleno s PVC odtokovou trubkou ø100 mm..........................................................................................................................882,- 1058,- s DPH
Náhradní díly HL0203.1E Nástrčný kroužek
HL210.7
118,-
142,- s DPH
HL01025D Pryžová manžeta 124x78mm
129,-
155,- s DPH
Napojovací koleno pro záchodovou mísu - bílé s kulovým kloubem - nastavitelné od 0 - 90° s krycí růžicí odtoku HL210.7WE
bílé, DN 110....................................................................................................................................................................................... 1014,- 1216,- s DPH
Náhradní díly HL0203.1E Nástrčný kroužek HL01025D Pryžová manžeta 124x78mm HL7EL.WE Pružná krycí růžice
HL222
118,129,141,-
142,- s DPH 155,- s DPH 169,- s DPH
Napojovací souprava pro záchodovou mísu HL222/1 HL222/90
DN 110..................................................................................................................................................................................................503,- DN 80....................................................................................................................................................................................................503,-
603,- s DPH 603,- s DPH
Náhradní díly HL0222.1E Splachovací trubka komplet HL0222.3E Pryžová manžeta ke splachovací trubce
HL224
181,118,-
218,- s DPH 142,- s DPH
HL0222.2E Matice s krytkama
153,-
184,- s DPH
Napojovací koleno pro záchodovou mísu, 90° možnost zkrácení HL224.WE
PP............................................................................................................................................................................................................582,-
698,- s DPH
Náhradní díly HL01051D Nástrčná manžeta 138x80mm
263,-
315,- s DPH
27
®
Odpady, sifony HL224.1
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Napojovací koleno pro záchodovou mísu, 90° možnost zkrácení. S objímkou a připevňovacím úhelníkem HL224.1
. .............................................................................................................................................................................................................1166,- 1399,- s DPH
Náhradní díly HL01051D Nástrčná manžeta 138x80mm
HL225/90
263,-
315,- s DPH
HL0224.1E Konzola s objímkou
500,-
599,- s DPH
Napojovací koleno pro záchodovou mísu, 90° možnost zkrácení, pryžová manžeta se zpevňující vložkou HL225/90
DN 80/110............................................................................................................................................................................................582,-
698,- s DPH
Náhradní díly HL0225.2E Nástrčná manžeta k HL225(.1)/90
HL225.1/90
147,-
177,- s DPH
HL0225.3E Stavební zátka konická k HL225(.1)/90
157,-
188,- s DPH
Napojovací koleno pro záchodovou mísu, 90° možnost zkrácení, pryžová manžeta se zpevňující vložkou, včetně napojovací soupravy HL226 HL225.1/90
DN 80/110............................................................................................................................................................................................ 893,- 1072,- s DPH
Náhradní díly HL0225.2E Nástrčná manžeta k HL225(.1)/90 HL0225.3E Stavební zátka konická k HL225(.1)/90
HL226
147,157,-
177,- s DPH 188,- s DPH
HL226
Připojovací souprava - splachovací trubka s manžetou, připevňovací materiál a krytky šroubů pro závěsné WC
293,-
351,- s DPH
Napojovací souprava - splachovací trubka s manžetou a krytky šroubů pro závěsné WC HL226
. ............................................................................................................................................................................................................... 293,-
351,- s DPH
Náhradní díly HL0222.1E Splachovací trubka komplet HL0222.3E Pryžová manžeta ke splachovací trubce
HL227
218,- s DPH 142,- s DPH
HL0222.2E Matice s krytkama
153,-
184,- s DPH
Napojovací koleno pro záchodovou mísu s odbočkou DN50. Včetně napojovací soupravy HL222. HL227
HL300
181,118,-
DN 80/110, připojení DN 50........................................................................................................................................................1595,- 1915,- s DPH
Podlahová vpust s ležatým odtokem DN 50 s pevnou izolační přírubou, s přívodem ze strany DN40/50 a vztlakovým uzávěrem, s mřížkou 115x115 mm z nerezové oceli a nástavcem s plastovým rámem 123 x 123 mm, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL300 HL300G HL300K HL300R
DN50................................................................................................................................................................................................... 1071,- 1285,- s DPH jako HL300, avšak s rámem a mřížkou z litiny 150 x 150 mm, třída zatížení L15 (1500 kg)..................................2076,- 2492,- s DPH těleso podlahové vpusti................................................................................................................................................................ 472,- 566,- s DPH jako HL300, avšak s kruhovým rámem a vtokovou krytkou z nerezové oceli ø112mm......................................1506,- 1807,- s DPH
Náhradní díly HL0300.6E Vložka sifon a vztlakový uzávěr komplet HL37N Plastový nástavec ø110mm s vtokovou mřížkou 115x115 mm HL39G Plastový nástavec ø110 mm s rámem 150x150mm i mřížkou z litiny 137x137 mm
HL303K
309,- s DPH
545,-
654,- s DPH
HL38N
Plastový nástavec ø110mm s kruhovým rámem ø133mm a vtokovou krytkou z nerezové oceli ø112mm
1119,- 1342,- s DPH
1390,- 1668,- s DPH
Těleso podlahové vpusti s ležatým odtokem DN50 bez pevné izolační příruby, se třemi přívody ze strany DN40. Lze objednat příslušenství HL306, HL307, HL308… HL303K
28
258,-
DN 50.................................................................................................................................................................................................... 352,-
423,- s DPH
®
Odpady, sifony HL304
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Podlahová vpust s ležatým odtokem DN 50 s pevnou izolační přírubou, se třemi přívody ze strany DN40/50 a vztlakovým uzávěrem, s mřížkou 115x115 mm z nerezové oceli a nástavcem s plastovým rámem 123 x 123 mm, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL304 HL304K
DN 50.................................................................................................................................................................................................. 1071,- 1285,- s DPH těleso podlahové vpusti................................................................................................................................................................ 472,- 566,- s DPH
Náhradní díly HL0300.6E Vložka sifon a vztlakový uzávěr komplet
HL306
309,- s DPH
HL37N
Plastový nástavec ø110mm s vtokovou mřížkou 115x115 mm k HL300
545,-
654,- s DPH
Uzavírací zátka k HL303K s nerezovým kruhovým krytem ø110 mm nebo ø128 mm, Vhodná pro uzavření vtoků v nástavci s rámem např. serie HL80, HL80.1, HL300, HL304….. HL306-110 HL306-128
HL307
258,-
. ...............................................................................................................................................................................................................454,- . ...............................................................................................................................................................................................................454,-
545,- s DPH 545,- s DPH
Vtok (sifonová vložka) se vztlakovým uzávěrem k HL303K s mřížkou z nerezové oceli HL307 HL307.0
. ...............................................................................................................................................................................................................602,- jako HL307, avšak bez uzávěru proti vzduté vodě...............................................................................................................545,-
722,- s DPH 654,- s DPH
Náhradní díly HL0307.1E Vtoková mřížka k HL307
HL308
195,- s DPH
Rámeček z nerezové oceli k HL306 a HL307 HL308
HL310N
163,-
. ...............................................................................................................................................................................................................208,-
250,- s DPH
Podlahová vpust se svislým odtokem DN50/75/110, s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s mřížkou 115x115 mm z nerezové oceli a nástavcem s plastovým rámem 123 x 123 mm, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL310N HL310NK
DN 50/75/110....................................................................................................................................................................................1197,- 1436,- s DPH Těleso podlahové vpusti...............................................................................................................................................................449,- 539,- s DPH
Náhradní díly HL37N.1
HL310NKSML
Plastový nástavec ø110mm s vtokovou mřížkou z nerezové oceli 115x115mm a sifonovou vložkou 686,- 823,- s DPH
Těleso podlahové vpusti se svislým odtokem DN50/75/110, s pevnou izolační přírubou a pryžovým břitovým těsněním pro napojení na SML-litinové potrubní systémy DN50. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83. HL310NKSML/50 DN 50................................................................................................................................................................................................668,-
802,- s DPH
Náhradní díly HL01027D Pryžové lamelové těsnění
HL310NG
196,-
235,- s DPH
Podlahová vpust se svislým odtokem DN50/75/110, s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s litinovou mříží 137x137 mm a nástavcem s litinovým rámem 150 x 150 mm, s možností výškové úpravy. Třída zatížení L15 (1500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL310NG
DN 50/75/110...................................................................................................................................................................................2201,- 2641,- s DPH
Náhradní díly HL39.1G
Plastový nástavec ø110mm s rámem 150x150mm i mříží 137x137 mm z litiny a sifonovou vložkou 1519,- 1823,- s DPH
29
®
Odpady, sifony HL310NPr
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Podlahová vpust se svislým odtokem DN 50/75/110, s pevnou izolační přírubou, se zápachovou uzávěrkou ”PRIMUS”, s vtokovou mřížkou z nerezové oceli 115 x 115 mm a nástavcem s rámem 123x123 mm s možností délkové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL310NPr
DN 50/75/110...................................................................................................................................................................................1506,- 1807,- s DPH
Náhradní díly HL37NPr Plastový nástavec ø110mm s vtokovou mřížkou z nerezové oceli 115x115mm a sifonovou vložkou ”Primus” 978,- 1174,- s DPH
HL310NR
Podlahová vpust se svislým odtokem DN50/75/110, s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm) s kruhovou vtokovou krytkou ø112 mm a kruhovým rámem ø133 mm z nerezové oceli s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL310NR
DN 50/75/110................................................................................................................................................................................... 1647,- 1976,- s DPH
Náhradní díly HL38N.1
HL310NPrG
Plastový nástavec ø110mm s kruhovým rámem ø133mm a vtokovou krytkou z nerezové oceli ø112mm a zápachovou uzávěrkou 1256,- 1508,- s DPH
Podlahová vpust se svislým odtokem DN50/75/110, s pevnou izolační přírubou, se zápachovou uzávěrkou PRIMUS, s litinovou mříží 137x137 mm a nástavcem s litinovým rámem 150 x 150 mm, s možností výškové úpravy. Třída zatížení L15 (1500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL310NPrG
DN 50/75/110...................................................................................................................................................................................2556,- 3068,- s DPH
Náhradní díly HL39PrG Plastový nástavec ø110mm s rámem 150x150mm i mřížkou 137x137 mm z litiny a sifonovou vložkou ”Primus” 1793,- 2151,- s DPH
HL310NPrR
Podlahová vpust se svislým odtokem DN50/75/110, s pevnou izolační přírubou, se zápachovou uzávěrkou PRIMUS, s kruhovou vtokovou krytkou ø112 mm a nástavcem s kruhovým rámem ø133 mm z nerezové oceli s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL310NPrR
DN 50/75/110...................................................................................................................................................................................1959,- 2351,- s DPH
Náhradní díly HL38NPr Plastový nástavec ø110mm s kruhovým rámem ø133mm a vtokovou krytkou z nerezové oceli ø112mm a zápachovou uzávěrkou ”Primus” 1399,- 1678,- s DPH
HL310N-3000
Podlahová vpust se svislým odtokem DN50/75/110, s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s mřížkou 115x115 mm z nerezové oceli a nástavcem s nerezovým rámem 121 x 121 mm „KLICK KLACK“, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL310N-3000 HL310N-3120 HL310N-3121 HL310N-3123 HL310N-3124 HL310N-3125
HL310NPr-3000
DN 50/75/110 ...................................................................................................................................................................................1741,- mřížka QUADRA............................................................................................................................................................................. 4944,- mřížka SEINE.................................................................................................................................................................................. 4944,- mřížka ORINOKO.......................................................................................................................................................................... 4944,- mřížka NIL....................................................................................................................................................................................... 4944,- mřížka YUKON............................................................................................................................................................................... 4944,-
Podlahová vpust se svislým odtokem DN50/75/110, s pevnou izolační přírubou, se zápachovou uzávěrkou PRIMUS, s mřížkou 115x115 mm z nerezové oceli a nástavcem s nerezovým rámem 121 x 121 mm „KLICK KLACK“, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL310NPr-3000 HL310NPr-3120 HL310NPr-3121 HL310NPr-3123 HL310NPr-3124 HL310NPr-3125
HL310N.2
2089,- s DPH 5933,- s DPH 5933,- s DPH 5933,- s DPH 5933,- s DPH 5933,- s DPH
DN 50/75/110 ..............................................................................................................................................................................2049,- mřížka QUADRA..........................................................................................................................................................................5253,- mřížka SEINE................................................................................................................................................................................5253,- mřížka ORINOKO.......................................................................................................................................................................5253,- mřížka NIL....................................................................................................................................................................................5253,- mřížka YUKON............................................................................................................................................................................5253,-
2458,- s DPH 6304,- s DPH 6304,- s DPH 6304,- s DPH 6304,- s DPH 6304,- s DPH
Terasový balkonový vtok se svislým odtokem DN50/75/110, s pevnou izolační přírubou, se suchou zápachovou uzávěrkou -klapkou, s mřížkou 115x115 mm z nerezové oceli a nástavcem s plastovým rámem 123 x 123 mm, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL310N.2
DN 50/75/110....................................................................................................................................................................................1197,- 1436,- s DPH
Náhradní díly HL37N
30
Plastový nástavec ø110mm s vtokovou mřížkou z nerezové oceli 115x115 mm
545,-
654,- s DPH
HL090.4E Zápachová klapka
281,-
337,- s DPH
®
Odpady, sifony HL317
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Podlahová vpust se svislým odtokem DN50/75/110 s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s mřížkou z nerezové oceli 138 x 138 mm a nástavcem s plastovým rámem 150 x 150mm, s možností výškové úpravy se sítkem na nečistoty. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 84. HL317 HL317H
DN 50/75/110...................................................................................................................................................................................2472,- 2966,- s DPH Podlahová vpust jako HL317, avšak s továrně napojenou asfaltovou izolační manžetou................................ 4443,- 5332,- s DPH
Náhradní díly HL0317.5E Sítko HL0317.3E Zvonek sifonu HL0317.4E Reduktion DN 110 x DN 75
HL317K
132,- s DPH 367,- s DPH 222,- s DPH
HL66.3
Plastový nástavec ø145mm hladký /150x150mm/ 138x138mm mřížka nerez 1568,- 1881,- s DPH HL01059D Těsnící manžeta 172x145mm k tělesu vtoku 597,- 717,- s DPH
Těleso vpusti HL317 s pevnou izolační přírubou, pro kombinaci s nástavci HL66, HL66.1, HL66Q, HL67, HL350, HL350.1(.0), HL360, HL370. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 84. HL317K HL317KH
HL317KN
110,306,185,-
Těleso vpusti s pevnou izolační přírubou ...........................................................................................................................1549,- 1859,- s DPH Těleso vpusti s továrně napojenou asfaltovou izolační manžetou........................................................................... 3446,- 4136,- s DPH
Těleso vpusti HL317 s pevnou izolační přírubou, s nerezovou výstelkou a vyjímatelnou sifonovou vložkou. Určena pro kuchyňské provozy a pro kombinace s nástavci HL66, HL66.1, HL66Q, HL67, HL350, HL350.1(.0), HL360, HL370 HL317KN HL317KHN
Těleso vpusti s pevnou izolační přírubou .......................................................................................................................... 7040,- 8448,- s DPH Těleso vpusti s továrně napojenou asfaltovou izolační manžetou............................................................................ 9017,- 10820,- s DPH
Náhradní díly HL0317KN.3E Zápachový uzávěr komplet 516,HL01059D Těsnící manžeta 172x145mm k tělesu vtoku 597,-
HL320
HL0317.3E Zvonek sifonu
306,-
367,- s DPH
Prodlužovací nástavec pro HL92 HL320
HL340N
619,- s DPH 717,- s DPH
h =35 mm..............................................................................................................................................................................................197,-
236,- s DPH
Prodlužovací nástavec pro HL70, serii HL80, HL90, HL300, HL304, HL310N, HL510N a nástavce HL85N(H)© HL340N
Prodlužovací nástavec h=100 mm, ø110 mm . .......................................................................................................................197,-
236,- s DPH
Náhradní díly HL01067D O-kroužek 92x4 mm k HL340N
HL350
30,- s DPH
Prodlužovací nástavec pro HL62(.1)B(H), HL64(.1)B(H), HL72(.1)(H)(K), HL317(H)(K)(N) HL350
HL350.0
25,-
ø145mm, h= 155mm.......................................................................................................................................................................488,-
586,- s DPH
Prodlužovací nástavec s pevnou izolační přírubou a izolační soupravou HL84 bez izolační manžety a příslušenství, vhodný pro HL62(.1) B(H), HL64(.1)B(H), HL72(.1)(H)(K), HL317(H)(K)(N). Vhodný např. pro kotvení separačních vrtev na úrovni tepelné izolace u obrácených plochých střech HL350.0
ø145mm, h= 180mm, nástavec s nerezovou izolační přírubou a těsnicím dvoubřitým kroužkem, ............ 1897,- 2277,- s DPH
Náhradní díly HL84.0
HL350.1
Izolační souprava bez izolační manžety
1365,- 1638,- s DPH
Prodlužovací nástavec s pevnou izolační přírubou a izolační soupravou HL84 vhodný pro HL62(.1)B(H), HL64(.1)B(H), HL72(.1)(H)(K), HL317(H)(K)(N) HL350.1 HL350.1H
ø145mm, h= 180mm.....................................................................................................................................................................2828,- 3394,- s DPH Nástavec s továrně nataveným živičným izolačním pásem..........................................................................................3652,- 4383,- s DPH
Náhradní díly HL062B.3E Nosný kroužek HL01058D Těsnící souprava 220x155mm k izolační svorce pro nástavec
HL350.2
197,- s DPH
263,-
315,- s DPH
HL01059D Těsnící souprava 172x145mm k tělesu vtoku 597,- 717,- s DPH HL84 Izolační souprava včetně EPDM manžety 1365,- 1638,- s DPH
Prodlužovací nástavec s boční přítokovou trubkou DN 40 vhodný pro HL72(.1)(H)(K), HL317(H)(K)(N) HL350.2
HL360
164,-
ø145mm, h= 155mm..................................................................................................................................................................... 1559,- 1871,- s DPH
CeraDrain nástavec s polymerbetonovým límcem s polyesterovou tkaninou pro přímé napojení hydroizolačních stěrek (kontaktníchalternativních hydroizolací) a epoxidové nátěry podlah, vhodný pro HL72(.1)(K), HL317(K) HL360
ø145mm...........................................................................................................................................................................................11486,- 13783,- s DPH
Náhradní díly HL01058D Těsnící manžeta 220x155mm k izolační svorce pro nástavec
263,-
315,- s DPH
HL01059D Těsnící manžeta 172x145mm k tělesu vtoku
597,-
717,- s DPH
31
®
Odpady, sifony HL370
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Prodlužovací nástavec ”FlexDrain” s děrovaným límcem a nakašírovanou tkaninou, textilní manžetou k napojení hydroizolačních stěrek. S plastovým nástavcem a mřížkou i rámem (138x138 mm) z nerezové oceli. Pro HL317(H)(K)(N) HL370
ø145mm.............................................................................................................................................................................................6784,- 8140,- s DPH
Náhradní díly HL0317.1E Vtoková mřížka z nerezové oceli 138x138mm 1005,- 1206,- s DPH HL0370.2E Nástavec z nerezové oceli s excentrem 15mm ø145/150x150mm 3069,- 3683,- s DPH
HL400(ECO)
HL0370.3E Excentrický vystřeďovací kroužek HL0370.4E Netkaná geotextílie - manžeta
324,430,-
389,- s DPH 515,- s DPH
Podomítková vodní zápachová uzávěrka DN40/50 pro pračku nebo myčku nádobí se zpětnou armaturou (kulička) a čisticím otvorem, krycí deska z nerezové oceli 160 x 110 mm, montážní kryt v balení, minim.stavební hloubka 58 mm HL400 HL400ECO
DN 40/50...............................................................................................................................................................................................719,- DN 40/50 bez nerezové krytky, splastovými pohledovými díly v šedé barvě.........................................................354,-
863,- s DPH 425,- s DPH
Náhradní díly HL0400.1E Krytka z nerezové oceli 160x110 mm (HL400) 233,- 279,- s DPH HL0400.4E Krytka bílá 160x110 mm (HL400.WE) 928,- 1114,- s DPH HL0400.5E Závitový kroužek 1”x54mm 44,53,- s DPH HL0400.6E Čistící matice 1” 91,- 109,- s DPH
HL404
HL0400.8E Stavební kryt 324,HL19 Kolenová přípojka 1” x připojení hadice 3/4” 106,HL01050D O-kroužek 18x2,5mm 21,HL0400.7E Zátka k HL19 21,-
389,- s DPH 127,- s DPH 25,- s DPH 25,- s DPH
Podomítková vodní zápachová uzávěrka DN40/50 pro pračku nebo myčku nádobí s možností připojení přivzdušňovacího ventilu (závit 1” ), krycí deska z nerezové oceli 225x110 mm, montážní kryt v balení, min.stavební hloubka 65 mm HL404
DN 40/50..............................................................................................................................................................................................828,-
994,- s DPH
Náhradní díly HL0400.5E Závitový kroužek 1”x54mm 44,53,- s DPH HL0400.6E Čistící matice 1” 91,- 109,- s DPH HL0404.1E Krytka z nerezové oceli 225x108mm (HL404) 306,- 367,- s DPH HL0404.3E Krytka bílá 225x108 mm (HL404.WE) 973,- 1168,- s DPH
HL404.1
HL0404.4E Stavební kryt 324,HL19 Kolenová přípojka 1” x připojení hadice 3/4” 106,HL01050D O-kroužek 18x2,5mm 21,HL0400.7E Zátka k HL19 21,-
389,- s DPH 127,- s DPH 25,- s DPH 25,- s DPH
Podomítková vodní zápachová uzávěrka DN40/50 pro pračku nebo myčku nádobí s integrovaným přivzdušňovacím ventilem HL902, krycí deska z nerezové oceli 225x110 mm, montážní kryt v balení, min.stavební hloubka 65 mm HL404.1
DN 40/50............................................................................................................................................................................................ 1221,- 1465,- s DPH
Náhradní díly HL0400.5E Závitový kroužek 1”x54mm 44,HL0400.6E Čistící matice 1” 91,HL0404.1E Krytka z nerezové oceli 225x108mm (HL404) 306,-
HL405(ECO)
53,- s DPH 109,- s DPH 367,- s DPH
HL0404.4E Stavební kryt 324,HL19 Kolenová přípojka 1” x připojení hadice 3/4” 106,HL902 Přivzdušňovací ventil 1” 453,-
389,- s DPH 127,- s DPH 544,- s DPH
Podomítková vodní zápachová uzávěrka DN40/50 pro pračku nebo myčku nádobí s integrovanou tvarovkou pro přívod vody (mosazná nástěnka 1/2” vnitřní závit), krycí deska z nerezové oceli 180x100 mm, montážní kryt a zátka HL42 v balení HL405 HL405ECO
DN 40/50............................................................................................................................................................................................ 1351,- 1622,- s DPH DN 40/50 bez připojovací nástěnky.......................................................................................................................................... 759,- 911,- s DPH
Náhradní díly HL0400.5EC Závitový kroužek 1” chromovaný 64,HL0405.1E Krytka z nerezové oceli 190x110 mm 255,HL0405.2E Montážní deska včetně šroubků a zvukové ochrany 191,HL0405.8E Šrouby a zvuková ochrana (podložka) k nim 58,HL0405.3E Mosazná nástěnka 1/2”x1/2” 441,-
HL405B
229,- s DPH 69,- s DPH 529,- s DPH
HL0405.4E Stavební kryt HL19.C Kolenová přípojka 1” x připojení hadice 3/4” chromované HL42.B Ochranná zátka 1/2”, modrá HL420 Prodloužení závitu 1”x68mm HL0440.2E Ochranná zátka závitu (HL405ECO)
324,-
389,- s DPH
162,49,171,95,-
194,- s DPH 59,- s DPH 205,- s DPH 114,- s DPH
Montážní lišta pro předstěnové instalace (Pozinkovaná konzola), vhodná pro HL44(S), HL400(ECO), HL405(E), 406(.2)(E), HL134(.0)(.2), HL138… HL405B
HL405E
77,- s DPH 307,- s DPH
délka……….400 mm......................................................................................................................................................................168,-
201,- s DPH
Podomítková vodní zápachová uzávěrka DN40/50 pro pračku nebo myčku nádobí s integrovanou tvarovkou pro přívod vody (mosazná nástěnka 1/2” vnitřní závit) a elektrokrabicí pod omítku pro el.připojení, krycí deska z nerezové oceli 180x100 mm, montážní kryt a zátka HL42 v balení HL405E
DN 40/50............................................................................................................................................................................................2007,- 2409,- s DPH
Náhradní díly HL0400.5EC Závitový kroužek 1” chromovaný HL0405.1E Krytka z nerezové oceli 190x110 mm HL0405.3E Mosazná nástěnka 1/2”x1/2” HL0405.4E Stavební kryt HL0405E.1E Montážní deska s elektrokrabicí
HL406
64,255,441,324,191,-
77,- s DPH 307,- s DPH 529,- s DPH 389,- s DPH 229,- s DPH
HL0405.8E Šrouby a zvuková ochrana (podložka) k nim 58,HL19.C Kolenová přípojka 1” x připojení hadice 3/4” chromované 162,HL42.B Ochranná zátka 1/2”, modrá 49,HL420 Prodloužení závitu 1”x68mm 171,-
69,- s DPH 194,- s DPH 59,- s DPH 205,- s DPH
Podomítková vodní zápachová uzávěrka DN40/50 pro pračku nebo myčku nádobí s integrovanou tvarovkou pro přívod vody (mosazná nástěnka 1/2” vnitřní závit) a výtokovým ventilem na hadici (se zpětnou a zavzdušňovací armaturou). Krycí deska z nerezové oceli 180x100 mm, montážní kryt a zátka HL42 v balení HL406
DN 40/50............................................................................................................................................................................................3528,- 4233,- s DPH
Náhradní díly HL0400.5EC Závitový kroužek 1” chromovaný 64,HL0405.1E Krytka z nerezové oceli 190x110 mm 255,HL0405.2E Montážní deska včetně šroubků a zvukové ochrany 191,HL0405.8E Šrouby a zvuková ochrana (podložka) k nim 58,HL0405.3E Mosazná nástěnka 1/2”x1/2” 441,-
32
77,- s DPH 307,- s DPH 229,- s DPH 69,- s DPH 529,- s DPH
HL0405.4E Stavební kryt HL19.C Kolenová přípojka 1” x připojení hadice 3/4” chromované HL42.B Ochranná zátka 1/2”, modrá HL0406.1E Výtokový ventil 1/2” HL420 Prodloužení závitu 1”x68mm
324,-
389,- s DPH
162,- 194,- s DPH 49,59,- s DPH 1661,- 1994,- s DPH 171,- 205,- s DPH
®
Odpady, sifony HL406E
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Podomítková vodní zápachová uzávěrka DN40/50 pro pračku nebo myčku nádobí s integrovanou tvarovkou pro přívod vody (mosazná nástěnka 1/2” vnitřní závit), výtokovým ventilem na hadici (se zpětnou a zavzdušňovací armaturou) a elektrickou zásuvkou. Krycí deska z nerezové oceli 280x100 mm, montážní kryt a zátka HL42 v balení HL406E
DN 40/50............................................................................................................................................................................................6559,- 7871,- s DPH
Náhradní díly HL0400.5EC Závitový kroužek 1” chromovaný 64,77,- s DPH HL0405.3E Mosazná nástěnka 1/2”x1/2” 441,- 529,- s DPH HL0405.4E Stavební kryt 324,- 389,- s DPH HL0405E.1E Montážní deska s elektrokrabicí 191,- 229,- s DPH HL0405.8E Šrouby a zvuková ochrana (podložka) k nim 58,69,- s DPH HL0406.1E Výtokový ventil 1/2” 1661,- 1994,- s DPH
HL406.2
HL0406E.1E Krytka z nerezové oceli 280x100 mm s víčkem el. zásuvky 340,- 408,- s DPH HL0406E.2E El.zásuvka komplet k HL406E 1661,- 1994,- s DPH HL19.C Kolenová přípojka 1” x připojení hadice 3/4” 162,- 194,- s DPH HL42 Ochranná zátka 1/2” 49,59,- s DPH HL420 Prodloužení závitu 1”x68mm 171,- 205,- s DPH
Podomítková vodní zápachová uzávěrka DN40/50 pro pračku nebo myčku nádobí se dvěma integrovanými tvarovkami pro přívod vody (2x mosazná nástěnka 1/2” vnitřní závit), dvěma výtokovými ventily na hadici (se zpětnou a zavzdušňovací armaturou). Krycí deska z nerezové oceli 280x100 mm, montážní kryt, 2x zátka HL42, montážní deska HL44S v balení HL406.2
DN 40/50........................................................................................................................................................................................... 8489,- 10187,- s DPH
Náhradní díly HL0400.5EC Závitový kroužek 1” chromovaný HL0405.3E Mosazná nástěnka 1/2”x1/2” HL0405.4E Stavební kryt HL0406.1E Výtokový ventil 1/2” HL0406.2.1E Krytka z nerezové oceli 280x100 mm HL19.C Kolenová přípojka 1” x připojení hadice 3/4” chromované
HL410
64,77,- s DPH 441,- 529,- s DPH 324,- 389,- s DPH 1661,- 1994,- s DPH 890,- 1068,- s DPH 162,-
HL42.B HL42.R HL420 HL44S
Ochranná zátka 1/2”, modrá Ochranná zátka 1/2”, červená Prodloužení závitu 1”x68mm Montážní deska z plastu s předvrtanými otvory, zvukově izolovaná
49,49,171,-
59,- s DPH 59,- s DPH 205,- s DPH
850,- 1020,- s DPH
194,- s DPH
Nástěnná vodní zápachová uzávěrka DN40 pro pračku nebo myčku, kryt - barva bílá HL410
DN40......................................................................................................................................................................................................719,-
863,- s DPH
Náhradní díly HL0410.1E Kryt
HL420
329,-
394,- s DPH
HL19
Kolenová přípojka 1” x připojení hadice 3/4” 106,-
127,- s DPH
Prodloužení závitu 1” pro HL400(ECO), HL 404(.1), HL405E(ECO), HL406(.2)(E), HL440 HL420
l = 92 mm..............................................................................................................................................................................................171,-
205,- s DPH
Náhradní díly HL01050D O-kroužek 18x2,5mm
HL421
21,-
25,- s DPH
Zásuvné prodloužení závitu 1” pro HL404(.1) HL421
l = 120 mm............................................................................................................................................................................................171,-
205,- s DPH
Náhradní díly HL01050D O-kroužek 18x2,5mm
HL430
21,-
25,- s DPH
Pisoárová zápachová uzávěrka odsávací s variabilním odtokem (0 - 90°), vhodná pro odsávací pisoárové mísy s ležatým vnitřním odtokem. Např: Laufen (Öspag) Kaprun 4050, Caprino 4406, Alessi, Casa.. ; Jika: Typ Golem, Vila, LIVO ; ROCA: Chic; Ideal Standard: Connect, Golf, Celia, Venice 21, Anvance, Penta Typ K 5503; Villeroy + Boch: serie Omnia, Aveo, Belevue, Editionals, Pure Stone, Century; Keramag: Typ 236500, Delta Fondo, Public Line, Aller, Renova Nr. 1, Corso, Mondo, Pareo, Monodet, Flow, ; Sphinx: Eurobase 70/75, Europa 80/85, Antibes Novoboch 600/601, P-4005 LGA, Dolomite Volga 2956, 2957; HL430/40 DN 40....................................................................................................................................................................................................942,- 1131,- s DPH HL430/50 DN 50....................................................................................................................................................................................................942,- 1131,- s DPH HL430/50-1L DN 50 pro elektronické splachování s množstvím vody pro jedno spláchnutí 1 l..................................................942,- 1131,- s DPH Náhradní díly HL01057D Manžeta 76x36mm
HL431
147,-
177,- s DPH
Pisoárová zápachová uzávěrka odsávací s variabilním odtokem (0 - 90°), vhodná pro odsávací pisoárové mísy se svislým vnitřním odtokem.Vhodný je například pro Urinály od Laufen: Tamaro,Tamaro-S, Taro Nova, Taro Uni, Taro Binal HL431/40 HL431/50
DN 40...................................................................................................................................................................................................1167,- 1400,- s DPH DN 50...................................................................................................................................................................................................1167,- 1400,- s DPH
Náhradní díly HL0431.1E Rameno komplet HL01057D Manžeta 76x36mm
430,147,-
515,- s DPH 177,- s DPH
HL0431.2E O-kroužek 58,6x3 mm
29,-
35,- s DPH
33
®
Odpady, sifony HL432
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Pisoárová zápachová uzávěrka odsávací s variabilním odtokem s prodlouženým nasouvacím hrdlem. Vhodný je pro urinál ” JOLY” od Keramag HL432/40 HL432/50
DN 40.................................................................................................................................................................................................... 951,- 1141,- s DPH DN 50.................................................................................................................................................................................................... 951,- 1141,- s DPH
Náhradní díly HL01057D Manžeta 76x36mm
HL440
147,-
177,- s DPH
Podomítoková mechanická zápachová uzávěrka DN40/50 pro pračku nebo myčku, se suchým uzávěrem proti pronikání zápachu kuličkou, s krytkou z nerezové oceli 160 x 110 mm HL440
DN 40/50...............................................................................................................................................................................................410,-
492,- s DPH
Náhradní díly HL0400.5E Závitový kroužek 44,HL0400.6E Čistící matice 1” 91,HL0440.1E Krytka z nerezové oceli 160x110 mm k HL440 233,-
HL500
53,- s DPH 109,- s DPH 279,- s DPH
HL0440.2E Ochranná zátka závitu (HL405ECO) 95,HL19 Kolenová přípojka 1” x připojení hadice 3/4” 106,-
114,- s DPH 127,- s DPH
Zápachová uzávěrka DN40/50 k vanové odpadní soupravě s kulovým kloubem na odtoku 5/4” nebo 6/4”, samočisticí HL500-5/4 HL500-6/4 HL500N-5/4 HL500N-6/4
DN 40/50 x 5/4”.................................................................................................................................................................................363,- DN 40/50 x 6/4”.................................................................................................................................................................................363,- DN 40/50 x 5/4” bez kloubu......................................................................................................................................................... 233,- DN 40/50 x 6/4” bez kloubu......................................................................................................................................................... 233,-
435,- s DPH 435,- s DPH 279,- s DPH 279,- s DPH
Náhradní díly HL01072D Klingerové ploché těsnění 6/4” 45x35x2mm
HL510N
12,-
15,- s DPH
HL01071D Klingerové ploché těsnění 5/4” 30x39x2 mm
12,-
15,- s DPH
Podlahová vpust s ležatým odtokem DN40/50, s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s mřížkou 115x115 mm z nerezové oceli a nástavcem s plastovým rámem 123 x 123 mm, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL510N HL510NK
DN 40/50..............................................................................................................................................................................................809,- Těleso podlahové vpusti................................................................................................................................................................187,-
970,- s DPH 225,- s DPH
Náhradní díly HL37N.1
HL510NC
Plastový nástavec ø110mm s vtokovou mřížkou z nerezové oceli 115x115 mm a sifonovou vložkou 686,- 823,- s DPH
Podlahová vpust s ležatým odtokem DN40/50 a límcem CeraDrain z polymerbetonu s polyesterovou tkaninou pro přímé napojení hydroizolačních stěrek (kontaktních-alternativních hydroizolací). Ze zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s mřížkou 115x115 mm z nerezové oceli a nástavcem s nerezovým rámem 121 x 121 mm „KLICK-KLACK“, s možností výškové úpravy. Třída zatížení K3 (300 kg). Min. stavební výška 95mm. HL510NC HL510NCK
DN40/50, třída zatížení K3 (300 kg).........................................................................................................................................7909,- 9491,- s DPH Těleso podlahové vpusti ”Cera Drain”...................................................................................................................................6439,- 7726,- s DPH
Náhradní díly HL3000.1 Plastový nástavec ø110mm s nerezovým rámem 121x121mm a mřížkou 115x115mm a sifonovou vložkou 1372,- 1646,- s DPH
HL510NG
Podlahová vpust s ležatým odtokem DN40/50, s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s litinovou mříží 137x137 mm a nástavcem s litinovým rámem 150 x 150 mm, s možností výškové úpravy. Třída zatížení L15 (1500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL510NG
DN 40/50............................................................................................................................................................................................1933,- 2320,- s DPH
Náhradní díly HL39.1G
HL510NPr
Plastový nástavec ø110mm s rámem 150x150mm i mřížkou 137x137 mm z litiny a sifonovou vložkou 1519,- 1823,- s DPH
Podlahová vpust s ležatým odtokem DN 40/50, s pevnou izolační přírubou, se zápachovou uzávěrkou ”PRIMUS”, s vtokovou mřížkou z nerezové oceli 115 x 115 mm a nástavcem s rámem 123x123 mm s možností délkové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL510NPr
DN 40/50............................................................................................................................................................................................1239,- 1487,- s DPH
Náhradní díly HL37NPr Plastový nástavec ø110mm s vtokovou mřížkou z nerezové oceli 115x115mm a sifonovou vložkou ”Primus”
34
978,- 1174,- s DPH
®
Odpady, sifony HL510NR
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Podlahová vpust s ležatým odtokem DN40/50, s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm) s kruhovou vtokovou krytkou ø112 mm a kruhovým rámem ø133 mm z nerezové oceli s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL510NR
. .............................................................................................................................................................................................................1380,- 1656,- s DPH
Náhradní díly HL38N.1
HL510NPrG
Plastový nástavec ø110mm s kruhovým rámem ø133mm a vtokovou krytkou z nerezové oceli ø112mm a zápachovou uzávěrkou 1256,- 1508,- s DPH
Podlahová vpust s ležatým odtokem DN40/50, s pevnou izolační přírubou, se zápachovou uzávěrkou PRIMUS, s litinovou mříží 137x137 mm a nástavcem s litinovým rámem 150 x 150 mm, s možností výškové úpravy. Třída zatížení L15 (1500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL510NPrG
DN 40/50............................................................................................................................................................................................2236,- 2683,- s DPH
Náhradní díly HL39PrG Plastový nástavec ø110mm s rámem 150x150mm a mřížkou137x137 mm z litiny a sifonovou vložkou ”Primus” 1793,- 2151,- s DPH
HL510NPrR
Podlahová vpust s ležatým odtokem DN40/50, s pevnou izolační přírubou, se zápachovou uzávěrkou PRIMUS, s kruhovou vtokovou krytkou ø112 mm a nástavcem s kruhovým rámem ø133 mm z nerezové oceli s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL510NPrR
. .............................................................................................................................................................................................................1700,- 2039,- s DPH
Náhradní díly HL38NPr Plastový nástavec ø110mm s kruhovým rámem ø133mm a vtokovou krytkou z nerezové oceli ø112mma zápachovou uzávěrkou ”Primus” 1399,- 1678,- s DPH
HL510N-3000
Podlahová vpust s ležatým odtokem DN40/50, s pevnou izolační přírubou, se zápachovou uzávěrkou (výška vodního uzávěru 50 mm), s mřížkou 115x115 mm z nerezové oceli a nástavcem s nerezovým rámem 121 x 121 mm „KLICK KLACK“, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL510N-3000 HL510N-3120 HL510N-3121 HL510N-3123 HL510N-3124 HL510N-3125
HL510NPr-3000
DN 40/50 ..........................................................................................................................................................................................1469,- mřížka QUADRA..............................................................................................................................................................................4672,- mřížka SEINE...................................................................................................................................................................................4672,- mřížka ORINOKO...........................................................................................................................................................................4672,- mřížka NIL........................................................................................................................................................................................4672,- mřížka YUKON................................................................................................................................................................................4672,-
Podlahová vpust s ležatým odtokem DN40/50, s pevnou izolační přírubou, se zápachovou uzávěrkou PRIMUS, s mřížkou 115x115 mm z nerezové oceli a nástavcem s nerezovým rámem 121 x 121 mm „KLICK KLACK“, s možností výškové úpravy. Třída zatížení K3 (300 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 83, nástavec s izolační přírubou HL85N a prodloužení nástavce HL340N. HL510NPr-3000 HL510NPr-3120 HL510NPr-3121 HL510NPr-3123 HL510NPr-3124 HL510NPr-3125
HL513-100G/50
DN 40/50 ......................................................................................................................................................................................1782,- mřížka QUADRA..........................................................................................................................................................................4987,- mřížka SEINE................................................................................................................................................................................4987,- mřížka ORINOKO.......................................................................................................................................................................4987,- mřížka NIL....................................................................................................................................................................................4987,- mřížka YUKON............................................................................................................................................................................4987,-
2138,- s DPH 5985,- s DPH 5985,- s DPH 5985,- s DPH 5985,- s DPH 5985,- s DPH
Vodní zápachová uzávěrka (trubková) DN50 ke keramickým výlevkám ( s otvorem 60-65mm) s krytkou z ušlechtilé oceli pr. 86mm. S kulovým kloubem na odtoku pro snažší připojení na odtoké potrubí. Zápachová uzávěrka se dodává bez zátky ventilu a bez krycí růžice odtoku. Zápachová uzávěrka - 70mm. Doporučeno např. pro: Keramickou výlevku od Keramag: KOLO ..Quelle, Ideal Standard ...Duoro HL513-100G/50 ........................................................................................................................................................................................................... 732,-
HL513/S
1763,- s DPH 5606,- s DPH 5606,- s DPH 5606,- s DPH 5606,- s DPH 5606,- s DPH
879,- s DPH
Odpadní ventil pro vany sprchových koutů s krytkou z ušlechtilé oceli, svislý odtok DN40. Vhodný pro HL100G, DN 40 HL513/S HL513/S.0
. ...............................................................................................................................................................................................................638,- odpadní ventil jako HL513 S, ale bez krytky..........................................................................................................................382,-
765,- s DPH 459,- s DPH
Náhradní díly HL01053D Těsnění ventilu 78x49mm HL0514S.1E Vložka ventilu
48,95,-
58,- s DPH 114,- s DPH
HL514/S.1 Krytka z ušlechtilé oceli ø86mm
241,-
289,- s DPH
35
®
Odpady, sifony HL514
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Zápachová uzávěrka DN40/50 ke sprchovým mísám 6/4” s kulovým kloubem a zátkou. Samočistící efekt. HL514 HL514-80
pro odpadní otvory sprchových mís Ø 52 mm..................................................................................................................... 539,- pro odpadní otvory sprchových mís Ø 60 mm..................................................................................................................... 659,-
646,- s DPH 791,- s DPH
Náhradní díly HL01044D HL015.6E HL024.5E HL01053D HL01075D HL0514.1E
HL514/SN
Zátka 6/4” s kroužkem Zátka 6/4” Kroužek klíčový Těsnění k ventilu 78x49mm(HL514) Těsnění k ventilu 85x57mm(HL514-80) Talířek ventilu z nerezové oceli 6/4”
85,85,29,48,48,103,-
103,- s DPH 103,- s DPH 35,- s DPH 58,- s DPH 58,- s DPH 124,- s DPH
HL0514.11E Talířek ventilu z nerezové oceli ø80mm (HL514-80) HL0514.6E Šroub k ventilu (HL514) HL0514.12E Šroub k ventilu Liko M6x80mm (HL514-80) HL526 Sítko na vlasy 6/4”
106,71,65,35,-
127,- s DPH 85,- s DPH 78,- s DPH 42,- s DPH
Zápachová uzávěrka DN40/50 pro sprchové mísy 6/4” s kulovým kloubem, krytkou z nerezové oceli pr.86mm. Samočistící efekt. HL514/SN HL514/SN-80 HL514/SN.0 HL514/SNV HL514/S.1 HL514/S.2 HL514/S.3 HL514/S.11 HL514/S.1X
pro odpadní otvory sprchových mís Ø 52 mm..................................................................................................................... 539,- 646,- s DPH pro odpadní otvory sprchových mís Ø 60 mm . .................................................................................................................. 539,- 646,- s DPH bez pohledových dílů....................................................................................................................................................................449,- 539,- s DPH jako HL514/SN, avšak s připojením hadice 8 - 13 mm; např. pro sprchy s vyvíječem páry nebo pro odvody kondenzátu....................................................................................................................................................848,- 1017,- s DPH Krytka z nerezové oceli, ø86mm.................................................................................................................................................241,- 289,- s DPH Krytka z leštěné mosazi, ø86mm..............................................................................................................................................1017,- 1220,- s DPH Krytka bílá, ø86mm..........................................................................................................................................................................747,- 896,- s DPH Krytka zlacená, ø86mm................................................................................................................................................................1017,- 1220,- s DPH Krytka z nerezové oceli - zvýšené žebra pro lepší průtok vody pro normám neodpovídají sprchové mísy......................................................................................................................................241,- 289,- s DPH
Náhradní díly HL01053D Těsnění ventilu (HL514/SN) HL01075D Těsnění ventilu (HL514/SN-80) HL0514S.1E Vložka ventilu (HL514/SN)
HL515
48,48,95,-
58,- s DPH 58,- s DPH 114,- s DPH
HL0514S.3E Vložka ventilu (HL514/SN-80) HL514/S.1 Krytka z ušlechtilé oceli ø86mm
95,241,-
114,- s DPH 289,- s DPH
Průhledná přepadová trubka (polykarbonát) 100 mm / 6/4” k HL514 , HL15 a HL80.2(H), v délkách objednání á 1 mm HL515 HL515-250 HL515-500 HL515-750 HL515-1000 HL515-1300 HL515-1500
. ............................................................................................................................................................................................................... 255,- délka 101 - 250 mm........................................................................................................................................................................2035,- délka 260 - 500 mm.......................................................................................................................................................................2209,- délka 510 - 750 mm........................................................................................................................................................................2299,- délka 760 - 1000 mm.....................................................................................................................................................................2565,- délka do 1300 mm.......................................................................................................................................................................... 5215,- délka do 1500 mm..........................................................................................................................................................................5923,-
307,- s DPH 2442,- s DPH 2651,- s DPH 2759,- s DPH 3078,- s DPH 6258,- s DPH 7107,- s DPH
Náhradní díly HL01030D Těsnění 41x35mm k HL515
HL515/S
25,-
30,- s DPH
Průhledná přepadová trubka (polykarbonát) 100 mm / 38 mm k HL514/SN a HL513/S HL515/S
. ...............................................................................................................................................................................................................408,-
489,- s DPH
Náhradní díly HL01060D 2 O-kroužky 28x3 mm
HL517
205,-
246,- s DPH
Průhledná přepadová trubka (polykarbonát) 105 mm / 80 mm k serii HL520 a HL522(V) HL517
. ...............................................................................................................................................................................................................449,-
539,- s DPH
Náhradní díly HL0431.2E O-kroužek 58,6x3 mm
HL520
29,-
35,- s DPH
Zápachová uzávěrka DN50 pro sprchové mísy s odpadním otvorem Ø 90 mm, s krytkou z nerezové oceli pr. 112mm a s otočným kloubem na odtoku. Zápachová uzávěrka: 50mm se sítkem na vlasy. Jednoduchý vstup do kanalizace v případě ucpání potrubí. Stavební výška 83 mm. Maximální průtok: 54 l/min, HL520 HL520N HL520.0 HL522.1 HL522N.1
s krytkou z nerezové oceli pr. 112mm.................................................................................................................................... 1607,- s chromovanou plastovou (ABS) krytkou pr. 112mm....................................................................................................... 1547,- těleso vtoku HL520 bez krytky...................................................................................................................................................886,- plochá krytka z nerezové oceli ø112mm.................................................................................................................................984,- plochá krytka (12 mm) ø112 mm z ABS, chromovaná.........................................................................................................882,-
1928,- s DPH 1856,- s DPH 1063,- s DPH 1180,- s DPH 1058,- s DPH
Náhradní díly HL0520.0E Stavební zátka/montážní klíč k HL520 HL0520.1E Ventil se šroubením k HL520 HL0520.2E Pryžová sifonová vložka k HL520
36
60,290,158,-
72,- s DPH 349,- s DPH 189,- s DPH
HL0520.3E Sítko na vlasy k HL520 HL01100D Těsnění ventilu k HL520
128,48,-
153,- s DPH 58,- s DPH
®
Odpady, sifony HL522(E)
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Zápachová uzávěrka DN40/50 pro sprchové mísy s odpadním otvorem Ø 90 mm, s krytkou z nerezové oceli pr. 112mm a s otočným kloubem na odtoku. Vyjímatelná zápachová uzávěrka: 50mm. Stavební výška 83 mm HL522 HL522E HL522.0 HL522V HL522V.0 HL522.1 HL522.2 HL522.3 HL522.11 HL522.1X
DN 40/50............................................................................................................................................................................................ 1607,- Ekonomická varinata s krytkou bez lakování........................................................................................................................860,- těleso vtoku HL522 bez krytky...................................................................................................................................................886,- s připojením na hadici 8-13 mm...............................................................................................................................................2095,- bez krytky......................................................................................................................................................................................... 1132,- Krytka z nerezové oceli ø112mm................................................................................................................................................984,- Krytka z leštěné mosazi ø112mm.............................................................................................................................................2355,- Krytka bílá ø112mm.......................................................................................................................................................................1865,- Krytka zlacená ø112mm...............................................................................................................................................................2355,- Krytka z nerezové oceli - zvýšené žebra pro lepší průtok vody, ø112mm..................................................................984,-
1928,- s DPH 1032,- s DPH 1063,- s DPH 2514,- s DPH 1358,- s DPH 1180,- s DPH 2825,- s DPH 2238,- s DPH 2825,- s DPH 1180,- s DPH
Náhradní díly HL01076D Těsnění ventilu 109x88mm HL0522.0E Stavební zátka/montážní klíč k HL522 HL0522.1E Ventil se šroubením 3-23mm HL0522.2E Sifonová vložka komplet HL0431.2E O-kroužek 58,6x3 mm HL19.2 Kolenová přípojka 1”, pro hadice 8-13 mm
HL522N
48,58,277,281,29,106,-
58,- s DPH 69,- s DPH 332,- s DPH 337,- s DPH 35,- s DPH 127,- s DPH
HL0522.1E Ventil se šroubením 3-23mm k HL522 HL0522.1XE Ventil se šroubením 13-33mm k HL522 pro silné dno sprchových mís HL522.1XLE Ventil se šroubením 30-50mm k HL522 pro silné dno sprchových mís
277,-
332,- s DPH
277,-
332,- s DPH
277,-
332,- s DPH
Zápachová uzávěrka DN40/50 pro sprchové mísy s odpadním otvorem Ø 90 mm, s plochou krytkou z ABS - chromovaná pr. 112mm a s otočným kloubem na odtoku. Zápachová uzávěrka: 50mm. Stavební výška 83 mm. HL522N HL522N.1
DN 40/50............................................................................................................................................................................................ 1547,- 1856,- s DPH Plochá krytka (12 mm) ø112 mm z ABS, chromovaná.........................................................................................................882,- 1058,- s DPH
Náhradní díly HL01076D Těsnění ventilu 109x88mm k HL522(N)(V) HL0522.0E Montážní klíč a stavební zátka HL0522.1E Ventil se šroubením 3-23mm
HL523N
48,58,277,-
58,- s DPH 69,- s DPH 332,- s DPH
HL0522.2E Sifonová vložka komplet HL0431.2E O-kroužek 58,6x3 mm
281,29,-
337,- s DPH 35,- s DPH
Sprchová systémová deska pro podlahy sprchových koutů, včetně tělesa vtoku HL520 s variabilním odtokem DN50 (s kulovým kloubem na odtoku), zápachovou uzávěrkou, s výškově stavitelným chromovaným plastovým rámem 121x121mm a s nerezovou vtokovou mřížkou 115x115mm. Systémová deska je vyrobena z EPS polystyrénu s integrovaným 3% spádováním a je odizolovaná proti vodě. Těsnící páska není součástí balení. Vhodný do skladeb podlah pro nízkoenergetické popř. pasivní domy. Další rozměry na vyžádání! HL523N-90x90 Odtok DN 40/50, 90x90cm.....................................................................................................................................................9788,- 11746,- s DPH HL523N-120x120 Odtok DN 40/50, 120x120cm...............................................................................................................................................12791,- 15349,- s DPH Náhradní díly HL0523N.1E Odtoková sada HL0523N.2E Výškově stavitelný rámeček HL523N krátký, 121x121mm, chromovaný, výškově stavitelný od 8 - 18 mm. HL0523N.2E Výškově stavitelný rámeček HL523N dlouhý, 121x121mm, chromovaný, výškově stavitelný od 18 - 25 mm. HL037N.0E Stavební ochranná zátka 123x123mm HL037N.1E Nerezová vtoková mřížka 115x115mm HL520.0 Těleso zápachové uzávěrky DN50 se sifovou vložkou
HL523U
2059,- 2471,- s DPH 261,-
313,- s DPH
261,29,327,-
313,- s DPH 35,- s DPH 392,- s DPH
HL01100D Těsnění ventilu k HL520 48,58,- s DPH HL0522.0E Stavební ochranná zátka/montážní klíč 58,69,- s DPH HL0520.0E Stavební zátka/montážní klíč k HL520 60,72,- s DPH HL0520.1E Ventil se šroubením k HL520 290,- 349,- s DPH HL0520.2E Pryžová sifonová vložka k HL520 158,- 189,- s DPH HL0520.3E Sítko na vlasy k HL520 128,- 153,- s DPH HL0523N-90x90E Těleso systémové desky 90x90 cm 8307,- 9968,- s DPH HL0523N-120x120E Těleso systémové desky 120x120 cm. 11859,- 14231,- s DPH
886,- 1063,- s DPH
Podkladový díl pro sprchové systémové desky. Tloušťka 85 mm, materiál polystyrén EPS. Vhodný do skladeb podlah pro nízkoenergetické popř. pasivní domy. Výkres skladeb na vyžádání .Další rozměry na vyžádání! HL523U-90x90 .........................................................................................................................................................................................................1801,- 2162,- s DPH HL523U-120x120 .........................................................................................................................................................................................................2865,- 3439,- s DPH
HL524
Zápachová uzávěrka k vanám sprchových koutů s 50mm otvorem, s kulovým kloubem na odtoku a integrovanou přepadovou trubicí. Krytka - chrom. HL524
DN50/40.............................................................................................................................................................................................1093,- 1311,- s DPH
Náhradní díly HL0524.0E Stavitelná přepadová trubice 0 - 70 mm HL0524.1E Chromovaná krytka ø75 mm HL0524.2E Ventil se šroubením délka 20 mm pro vaničky tloušťky do 8mm
HL525, HL526
424,205,-
509,- s DPH 246,- s DPH
95,-
114,- s DPH
HL0524.3E Ventil se šroubením délka 30 mm pro vaničky tloušťky 8-16mm
95,-
114,- s DPH
Síto na zachytávání vlasů pro odpadní ventil HL525 HL526
5/4”............................................................................................................................................................................................................35,- 6/4”............................................................................................................................................................................................................35,-
42,- s DPH 42,- s DPH
37
®
Odpady, sifony HL530
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Sprchový blok - podlahový žlab 1200x256x115mm s centricky umístěnou odtokovou vpustí DN50 s ležatým odtokem, se zápachovou uzávěrkou “PRIMUS”, s výškově stavitelným rámem 150 x 150mm a krytem vtoku pro vlepení dlažby v šedé barvě. Modul je vyroben z EPS 40 polystyrenu s tvarováním odtokového žlábku a je odizolován proti vodě izolačním nátěrem vyztuženým tkaninou. Slouží k přímému napojení vodorovných kontaktních-alternativních vodotěsných izolací - hydroizolačních stěrek. Směr připojení odtoku lze nastavit dle odtokového potrubí do prostoru podlahy nebo do stěny, délku modulu lze libovolně upravovat řezáním nebo přikládáním prodlužovacích prvků(HL530V) Nelze řezat drážku pro odtokové potrubí do nosného modulu!! Minimální stavební výška modulu je 115mm. Stavební ochranný kryt rámu je v balení výrobku. K nalepení se používá neexpandující PUR pěna nebo stavební lepidlo. Vhodný do skladeb podlah pro nízkoenergetické popř. pasivní domy. Výkresy na vyžádání zašleme nebo ke stažení na www.hutterer-lechner.com (oddíl download) nebo na www.odtokyhl.cz HL530 HL530.0 HL0530.G HL0530.W HL0530.S HL0530.B HL0530.C HL0530.GG HL0530.WG HL0530.SG HL0530.BG
Základní model, pohledové díly v šedé barvě.................................................................................................................. 6843,- Podlahový žlab bez pohledových dílů (rám + kryt) ale se sifonovou vložkou ”PRIMUS” .................................6055,- Pohledové díly v šedé barvě ......................................................................................................................................................880,- Pohledové díly v bílé barvě..........................................................................................................................................................880,- Pohledové díly v černé barvě......................................................................................................................................................880,- Pohledové díly v hnědé barvě....................................................................................................................................................880,- Pohledové díly v chromu............................................................................................................................................................ 1221,- Pohledové díly v šedé barvě se vsazeným skleněným krytem v šedé barvě.........................................................4914,- Pohledové díly v bílé barvě se vsazeným skleněným krytem v bílé barvě.............................................................4914,- Pohledové díly v černé barvě se vsazeným skleněným krytem v černé barvě......................................................4914,- Pohledové díly v hnědé barvě se vsazeným skleněným krytem ve hnědé barvě................................................4914,-
8212,- s DPH 7266,- s DPH 1056,- s DPH 1056,- s DPH 1056,- s DPH 1056,- s DPH 1465,- s DPH 5897,- s DPH 5897,- s DPH 5897,- s DPH 5897,- s DPH
Náhradní díly HL0530.1E Podlahový žlab bez pohledových dílů (rám + kryt)a bez sifonové vložky ”PRIMUS” 5482,- 6578,- s DPH HL0530.2E Sifonová vložka ”PRIMUS” kompletní 678,- 813,- s DPH
HL530V
Prodlužovací modul podlahového žlabu bez odtokové vpusti. Modul je vyroben z EPS polystyrenu s integrovaným spádem do odtokového žlábku a je odizolován proti vodě. Slouží k variabilnímu prodloužení podlahového žlabu a pro napojení vodorovných kontaktníchalternativních hydroizolací - hydroizolačních stěrek. Stavební výška modulu je 115mm. HL530V-120 HL530V-60 HL530V-30
HL555N
Prodlužovací modul 120cm ......................................................................................................................................................4158,- 4990,- s DPH Prodlužovací modul 60cm ........................................................................................................................................................2205,- 2646,- s DPH Prodlužovací modul 30cm ........................................................................................................................................................1295,- 1554,- s DPH
Vanová odpadní souprava s přepadem, se zápachovou uzávěrkou s kloubem na odtoku s připojením hadice 8 - 13 mm; např. pro odvody kondenzátu. Pohledové díly z mosazi – chromované. Bowden a přepadová trubice délky 60cm. HL555N HL555N.0 HL555N.1 HL555N.2 HL555N.3 HL555N.4
DN 40/50............................................................................................................................................................................................ 2132,- Odpadní souprava bez pohledových dílů............................................................................................................................1620,- Pohledové díly z mosazi - chromované................................................................................................................................... 712,- Pohledové díly z leštěné mosazi..............................................................................................................................................1490,- Pohledové díly z mosazi bílé....................................................................................................................................................... 712,- Pohledové díly z mosazi zlaté...................................................................................................................................................1490,-
2559,- s DPH 1944,- s DPH 854,- s DPH 1788,- s DPH 854,- s DPH 1788,- s DPH
Náhradní díly HL0555.5E
Zápachová uzávěrka DN 40/50 s kulovým kloubem na odtoku a těsnícím O-kroužkem, s přípojkou na hadici 8-13mm HL0555.6E O-kroužek 32x3mm HL0555N.13E Talířek ventilu
HL555N.L.0
453,66,274,-
544,- s DPH 79,- s DPH 329,- s DPH
HL0555N.15E O-kroužky DN32 (2ks) HL0555N.16E Montážní sada HL0555N.1E Sada těsnění HL0555N.2E Přepadová trubice 64cm HL01022D Břitové těsnění 40x32mm k zátce
135,191,626,277,25,-
162,- s DPH 229,- s DPH 751,- s DPH 332,- s DPH 30,- s DPH
Vanová odpadní souprava s přepadem, se zápachovou uzávěrkou s kloubem na odtoku s připojením hadice 8 - 13 mm; např. pro odvody kondenzátu. Bowden a přepadová trubice délky 80cm. Bez pohledových dílů. HL555N.L.0 HL555N.1
DN 40/50........................................................................................................................................................................................... 2400,- 2880,- s DPH Pohledové díly z mosazi - chromované................................................................................................................................... 712,- 854,- s DPH
Náhradní díly HL0555.5E
Zápachová uzávěrka DN 40/50 s kulovým kloubem na odtoku a těsnícím O-kroužkem, s přípojkou na hadici 8-13mm HL0555.6E O-kroužek 32x3mm HL0555N.13E Talířek ventilu
38
453,66,274,-
544,- s DPH 79,- s DPH 329,- s DPH
HL0555N.15E O-kroužky DN32 (2ks) HL0555N.16E Montážní sada HL0555N.1E Sada těsnění HL0555N.14E Přepadová trubice 91cm
135,191,626,277,-
162,- s DPH 229,- s DPH 751,- s DPH 332,- s DPH
®
Odpady, sifony HL560N
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Vanová odpadní a přívodní souprava s přepadem, se zápachovou uzávěrkou s kloubem na odtoku s připojením hadice 8 - 13 mm; např. pro odvody kondenzátu. Pohledové díly z mosazi – chromované. Bowden a přepadová trubice délky 60cm.Přepad v kombinaci s přívodem vody 3/4” pro napouštění vany. HL560N HL560N.2 HL560N.3 HL560N.4 HL560N.L HL560N.L2 HL560N.L3 HL560N.L4
DN40/50............................................................................................................................................................................................ 4988,- Odpadní souprava, pohledové díly - leštěná mosaz........................................................................................................8545,- Odpadní souprava, pohledové díly z mosazi - bílé...........................................................................................................8016,- Odpadní souprava, pohledové díly z mosazi - zlaté.........................................................................................................8545,- Odpadní souprava se zápachovou uzávěrkou 6/4” a v kombinaci s přívodem vody 3/4” pro napouštění vany, ovládací lanko 80cm, pohledové díly z mosazi - chromované.................................................5258,- Odpadní souprava prodloužená - ovládací lanko 80cm, pohledové díly - leštěná mosaz...............................8819,- Odpadní souprava prodloužená - ovládací lanko 80cm, pohledové díly - bílé.....................................................8285,- Odpadní souprava prodloužená - ovládací lanko 80cm, pohledové díly - zlaté...................................................8819,-
5986,- s DPH 10254,- s DPH 9620,- s DPH 10254,- s DPH 6310,- s DPH 10583,- s DPH 9942,- s DPH 10583,- s DPH
Náhradní díly HL0555.5E
Zápachová uzávěrka DN 40/50 s kulovým kloubem na odtoku a těsnícím O-kroužkem, s přípojkou na hadici 8-13mm HL0555.6E O-kroužek 32x3mm HL0555N.13E Talířek ventilu HL0555N.15E O-kroužky DN32 (2ks) HL0555N.1E Sada těsnění HL0555N.2E Přepadová trubice 64cm
HL600
453,66,274,135,626,277,-
544,- s DPH 79,- s DPH 329,- s DPH 162,- s DPH 751,- s DPH 332,- s DPH
HL0555N.4E Zátka mosaz - chrom HL01022D Břitové těsnění k zátce 40x32mm HL0555N.12E Nastavovací šroubek k zátce HL0555N.16E Montážní sada HL0560N.1E Růžice přepadu mosaz - chrom HL0560N.5E Sada pro napojení přepadové trubice HL0560N.6E Sada připevňovací HL0560N.7E Kolenová přípojka 3/4”x3/4”
519,- 623,- s DPH 25,30,- s DPH 58,69,- s DPH 191,- 229,- s DPH 460,- 552,- s DPH 324,- 389,- s DPH 2181,- 2617,- s DPH 649,- 779,- s DPH
Lapač střešních splavenin s košem pro zachytávání nečistot, s otočným a kulovým kloubem na odtoku, suchá klapka proti pronikání zápachu, těsnící kroužky pro připojení dešťových svodů do ø75, 100, 110 mm (ø120 mm u HL600/2). Zaručená kapacita odtoku 360 až 400 l/ min. HL600 HL600/2
DN 110................................................................................................................................................................................................2369,- 2843,- s DPH DN 125 včetně těsnícího kroužku ø120mm.........................................................................................................................2369,- 2843,- s DPH
Náhradní díly HL0600.1E Těsnící kroužky (vystřeďovací) 75, 90, 100, 110mm HL0600.2E Koš na listí pro HL600 HL0600.3E Čistící kryt HL0600.4E Klapka pro zápachový uzávěr
HL600G
229,420,553,229,-
274,- s DPH 504,- s DPH 664,- s DPH 274,- s DPH
Příslušenství HL0600.0E Těsnící kroužek pro litinové potrubí (ø120 mm)300,HL0600.5E Těsnící kroužek □ 80 -100mm 229,HL0600.7E Těsnící kroužek ø80mm 91,HL0600.8E Těsnící kroužek ø120mm k HL600/2 91,-
360,- s DPH 274,- s DPH 109,- s DPH 109,- s DPH
Lapač střešních splavenin DN110 s litinovým rámem, s otočným a kulovým kloubem na odtoku, s košem pro zachytávání nečistot, suchánezámrzná a pachonepropustná klapka. Pro připojení litinových svodných dešťových potrubí pr. 100mm (max. vnější průměr potrubí 120mm) + vystřeďovací kroužek pro plastová potrubí pr. 75,90,100 a 110mm. Vhodný pro památkově chráněné objekty a historické zóny měst atd... HL600G HL600G/2
DN 110................................................................................................................................................................................................ 4169,- 5003,- s DPH DN 125................................................................................................................................................................................................ 4169,- 5003,- s DPH
Náhradní díly HL0600.11E Jednodílný vystřeďovací kroužek pr. 75/90/100/110mm
HL601
. ..............................................................................................................................................................................................................1127,- 1352,- s DPH
Potrubní zápachový uzávěr do svislého potrubí, se suchou klapkou. Zamezuje šíření zápachu v blízkosti oken, teras, balkónů. Nevhodný pro splaškovou kanalizaci!! Pro údržbu klapky v zápachové uzávěrce je nutno bezprostředně pod zápachovou uzávěrku instalovat čisticí tvarovku (systém HT). HL603/1 HL603/5
HL605
200,- s DPH
Prodlužovací nástavec 50 mm s možností zkrácení (37,25 mm), s pomocným vedením pro pilku pro HL600(/2), HL660/2 HL601
HL603
167,-
DN 110................................................................................................................................................................................................ 2761,- 3314,- s DPH DN 160................................................................................................................................................................................................ 2761,- 3314,- s DPH
Velkokapacitní vtok PERFEKT s ležatým odtokem DN110 se suchou klapkou proti pronikání zápachu. s plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem. Třída zatížení L15 (1500 kg) HL605 HL605L HL605S HL605K
DN 110................................................................................................................................................................................................3401,- Jako HL605, avšak s plastovou vtokovou mřížkou............................................................................................................3335,- Jako HL605, avšak s nerezovou vtokovou mřížkou...........................................................................................................8289,- Těleso vtoku......................................................................................................................................................................................1147,-
4081,- s DPH 4002,- s DPH 9947,- s DPH 1377,- s DPH
Náhradní díly HL0606.1E Litinový rošt 226x226mm HL0606.2E Odkalovací koš HL0606.3E Zápachová klapka komplet
1349,- 1619,- s DPH 420,- 504,- s DPH 921,- 1105,- s DPH
HL0605.1E Plastový rošt HL0605.3E Nerezový rošt
1299,- 1559,- s DPH 6647,- 7976,- s DPH
39
®
Odpady, sifony HL605W
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Velkokapacitní podlahová vpust s ležatým odtokem DN110 s vodní zápachovou uzávěrkou, s plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem. Třída zatížení L15 (1500 kg) HL605W HL605LW HL605SW
DN 110................................................................................................................................................................................................3401,- 4081,- s DPH Jako HL605W, avšak s plastovou vtokovou mřížkou........................................................................................................3335,- 4002,- s DPH Jako HL605W, avšak s nerezovou vtokovou mřížkou.......................................................................................................8289,- 9947,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon)
HL605.1
921,- 1105,- s DPH
Velkokapacitní vtok PERFEKT s ležatým odtokem DN110 se suchou klapkou proti pronikání zápachu, s litinovým rámem 260x260 mm a litinovou mříží, odkalovacím košem. Třída zatížení M125 (12500 kg) HL605.1 HL605.1K
DN 110................................................................................................................................................................................................5062,- 6075,- s DPH Těleso vtoku.....................................................................................................................................................................................3273,- 3928,- s DPH
Náhradní díly HL0606.1E Litinový rošt 226x226mm HL0606.2E Odkalovací koš
HL605.1W
1349,- 1619,- s DPH 420,- 504,- s DPH
HL0606.3E Zápachová klapka komplet
921,- 1105,- s DPH
Velkokapacitní podlahová vpust PERFEKT s ležatým odtokem DN110 s vodní zápachovou uzávěrkou, s litinovým rámem 260x260 mm a litinovou mříží, odkalovacím košem. Třída zatížení M125 (12500 kg) HL605.1W
DN 110................................................................................................................................................................................................5062,- 6075,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon)
HL606
921,- 1105,- s DPH
Velkokapacitní vtok PERFEKT se svislým odtokem DN110 nebo DN160 se suchou klapkou proti pronikání zápachu, s plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem Třída zatížení L15 (1500 kg) HL606/1 HL606/5 HL606L/1 HL606L/5 HL606S/1 HL606S/5 HL606K/1 HL606K/5
DN 110................................................................................................................................................................................................3401,- DN 160................................................................................................................................................................................................3401,- Jako HL606/1, avšak s plastovou vtokovou mřížkou........................................................................................................3335,- Jako HL606/5, avšak s plastovou vtokovou mřížkou........................................................................................................3335,- Jako HL606/1, avšak s nerezovou vtokovou mřížkou.......................................................................................................8289,- Jako HL606/5, avšak s nerezovou vtokovou mřížkou......................................................................................................8289,- Těleso vtoku......................................................................................................................................................................................1147,- Těleso vtoku......................................................................................................................................................................................1147,-
4081,- s DPH 4081,- s DPH 4002,- s DPH 4002,- s DPH 9947,- s DPH 9947,- s DPH 1377,- s DPH 1377,- s DPH
Náhradní díly HL0606.1E Litinový rošt 226x226mm HL0606.2E Odkalovací koš HL0606.3E Zápachová klapka komplet
HL606W
1349,- 1619,- s DPH 420,- 504,- s DPH 921,- 1105,- s DPH
HL0605.1E Plastový rošt HL0605.3E Nerezový rošt
1299,- 1559,- s DPH 6647,- 7976,- s DPH
Velkokapacitní podlahová vpust PERFEKT se svislým odtokem DN110 nebo DN160, s vodní zápachovou uzávěrkou, s plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem. Třída zatížení L15 (1500 kg) HL606W/1 HL606W/5 HL606LW/1 HL606LW/5 HL606SW/1 HL606SW/5
DN 110................................................................................................................................................................................................3401,- DN 160................................................................................................................................................................................................3401,- Jako HL606W/1, avšak s plastovou vtokovou mřížkou....................................................................................................3335,- Jako HL606W/5, avšak s plastovou vtokovou mřížkou....................................................................................................3335,- Jako HL606W/1, avšak s nerezovou vtokovou mřížkou...................................................................................................8289,- Jako HL606W/5, avšak s nerezovou vtokovou mřížkou...................................................................................................8289,-
4081,- s DPH 4081,- s DPH 4002,- s DPH 4002,- s DPH 9947,- s DPH 9947,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon)
HL606.1
921,- 1105,- s DPH
Velkokapacitní vtok PERFEKT se svislým odtokem DN110 nebo DN160, se suchou klapkou proti pronikání zápachu, s litinovým rámem 260x260 mm a litinovou mříží, odkalovacím košem. Třída zatíženi M125 (12500 kg) HL606.1/1 HL606.1/5 HL606.1K/1 HL606.1K/5
DN 110................................................................................................................................................................................................5062,- DN 160................................................................................................................................................................................................5062,- Těleso vtoku.....................................................................................................................................................................................3273,- Těleso vtoku.....................................................................................................................................................................................3273,-
6075,- s DPH 6075,- s DPH 3928,- s DPH 3928,- s DPH
Náhradní díly HL0606.1E Litinový rošt 226x226mm HL0606.2E Odkalovací koš
HL606.1W
1349,- 1619,- s DPH 420,- 504,- s DPH
921,- 1105,- s DPH
Velkokapacitní podlahová vpust PERFEKTPERFEKT se svislým odtokem DN110 nebo DN160, s vodní zápachovou uzávěrkou, s litinovým rámem 260x260 mm a litinovou mříží, odkalovacím košem. Třída zatíženi M125 (12500 kg) HL606.1W/1 HL606.1W/5
DN 110................................................................................................................................................................................................5062,- 6075,- s DPH DN 160................................................................................................................................................................................................5062,- 6075,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon)
40
HL0606.3E Zápachová klapka komplet
921,- 1105,- s DPH
®
Odpady, sifony HL608
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Prodlužovací nástavec s plastovým rámem 240x240mm k serii HL605, HL606, HL615K a HL616K HL608
ø195mm, h= 144 mm.................................................................................................................................................................... 1153,- 1383,- s DPH
Náhradní díly HL01056D O-kroužek 180x6mm
HL608.1
157,-
188,- s DPH
Prodlužovací nástavec s litinovým rámem 260x260mm k serii HL605, HL606, HL615K a HL616K HL608.1
ø195mm, h= 152 mm.....................................................................................................................................................................3283,- 3939,- s DPH
Náhradní díly HL01056D O-kroužek 180x6mm
HL609
…..230V, samoregulační topný pás, dodávka bez termostatu.....................................................................................5505,- 6606,- s DPH
Zápachová uzávěrka HL610
HL615
188,- s DPH
Vyhřívací sada vhodná pro serie HL605(.1), HL615(.1), HL606(.1), 616(.1) složená z: samoregulované topné tělěso 36 W/230 V, samolepící tepelně vodivá hliníková páska, připevňovací a izolační materiál. Montážní návod: těleso vtoku důkladně očistěte, část tepelně vodivé pásky (50 mm x 10 m) omotejte kolem tělesa vtoku, omotejte paralelní topný pás (36 W/m, 230 V) a upevněte pomocí fixační svorky. Omotejte zbytkem tepelně vodivé pásky. Na závěr omotejte kolem tělesa tepelně izolační pásku (pěnovku 6 x 40 x 2000 mm). Poté vtok nainstalujte do stavebního otvoru a napojte na odtokový systém. Zafixujte těleso vtoku montážní pěnou. Elektrické připojení proveďte podle návodu na konci ceníku nebo na www.hl.blucina.net HL609
HL610
157,-
DN 110................................................................................................................................................................................................1450,- 1740,- s DPH
Velkokapacitní vtok PERFEKT s ležatým odtokem DN110, s pevnou izolační přírubou, se suchou klapkou proti pronikání zápachu, s výškově stavitelným nástavcem s plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem. Třída zatíženi L15 (1500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL615 HL615L HL615S HL615K
. ............................................................................................................................................................................................................. 4237,- Jako HL615, avšak s plastovou vtokovou mřížkou..............................................................................................................4157,- Jako HL615, avšak s nerezovou vtokovou mřížkou...........................................................................................................9153,- Těleso vtoku..................................................................................................................................................................................... 1961,-
5085,- s DPH 4988,- s DPH 10983,- s DPH 2353,- s DPH
Náhradní díly HL0606.2E Odkalovací koš HL0606.3E Zápachová klapka komplet HL621 Nástavec ø195mm/240x240/226x226mm litina
HL615H
420,- 504,- s DPH 921,- 1105,- s DPH 1396,- 1675,- s DPH
HL622 HL623
Nástavec ø195mm/240x240/226x226mm nerez Nástavec ø195mm/240x240/226x226mm plast
7109,- 8531,- s DPH 1370,- 1644,- s DPH
Velkokapacitní vtok PERFEKT s ležatým odtokem DN110, se suchou klapkou proti pronikání zápachu, s výškově stavitelným nástavcem s plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem a s továrně napojenou asfaltovou izolační manžetou. Třida zatížení L15 (1500 kg). HL615H HL615HL HL615HS HL615KH
DN 110............................................................................................................................................................................................... 6344,- Jako HL615H, avšak s plastovou vtokovou mřížkou.........................................................................................................6224,- Jako HL615H, avšak s nerezovou vtokovou mřížkou......................................................................................................11294,- Těleso vtoku.....................................................................................................................................................................................4025,-
7613,- s DPH 7469,- s DPH 13553,- s DPH 4830,- s DPH
Náhradní díly HL0606.2E Odkalovací koš HL0606.3E Zápachová klapka komplet HL621 Nástavec ø195mm/240x240/226x226mm litina
HL615HW
420,- 504,- s DPH 921,- 1105,- s DPH 1396,- 1675,- s DPH
HL622 HL623
Nástavec ø195mm/240x240/226x226mm nerez Nástavec ø195mm/240x240/226x226mm plast
7109,- 8531,- s DPH 1370,- 1644,- s DPH
Velkokapacitní podlahová vpust PERFEKT s ležatým odtokem DN110, s vodní zápachovou uzávěrkou, s výškově stavitelným plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem a s továrně napojenou asfaltovou izolační manžetou. Třida zatížení L15 (1500 kg). HL615HW HL615HLW HL615HSW
DN 110............................................................................................................................................................................................... 6344,- 7613,- s DPH Jako HL615H, avšak s plastovou vtokovou mřížkou.........................................................................................................6224,- 7469,- s DPH Jako HL615H, avšak s nerezovou vtokovou mřížkou......................................................................................................11294,- 13553,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon) HL621 Nástavec ø195mm/240x240/226x226mm litina
921,- 1105,- s DPH 1396,- 1675,-
s DPH
HL622 HL623
Nástavec ø195mm/240x240/226x226mm nerez Nástavec ø195mm/240x240/226x226mm plast
7109,- 8531,- s DPH 1370,- 1644,- s DPH
41
®
Odpady, sifony HL615W
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Velkokapacitní podlahová vpust PERFEKT s ležatým odtokem DN110, s pevnou izolační přírubou, s vodní zápachovou uzávěrkou, s výškově stavitelným plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem.Třida zatížení L15 (1500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL615W HL615LW HL615SW
DN 110................................................................................................................................................................................................ 4237,- 5085,- s DPH Jako HL615, avšak s plastovou vtokovou mříží....................................................................................................................4157,- 4988,- s DPH Jako HL615, avšak s nerezovou vtokovou mříží..................................................................................................................9153,- 10983,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon) HL621 Nástavec ø195mm/240x240/226x226mm litina
HL615.1
921,- 1105,- s DPH 1396,- 1675,-
s DPH
HL622 HL623
Nástavec ø195mm/240x240/226x226mm nerez Nástavec ø195mm/240x240/226x226mm plast
7109,- 8531,- s DPH 1370,- 1644,- s DPH
Velkokapacitní vtok PERFEKT s ležatým odtokem DN110, s pevnou izolační přírubou, se suchou klapkou proti pronikání zápachu, s výškově stavitelným litinovým rámem 260x260mm a litinovou mříží, odkalovacím košem. Třída zatíženi M125 (12500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL615.1
DN 110................................................................................................................................................................................................5730,- 6876,- s DPH
Náhradní díly HL0606.3E Zápachová klapka komplet
HL615.1H
921,- 1105,- s DPH
HL624
Nástavec ø195mm /260x260litina/ 226x226mm litina
4278,- 5133,- s DPH
Velkokapacitní vtok PERFEKT s ležatým odtokem DN110, se suchou klapkou proti pronikání zápachu, s výškově stavitelným litinovým rámem 260x260mm a litinovou mříží, odkalovacím košem a s továrně napojenou asfaltovou izolační manžetou.. Třída zatíženi M125 (12500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL615.1H
DN 110................................................................................................................................................................................................7422,- 8907,- s DPH
Náhradní díly HL0606.3E Zápachová klapka komplet
HL615.1HW
921,- 1105,- s DPH
HL624
Nástavec ø195mm /260x260litina/ 226x226mm litina
4278,- 5133,- s DPH
Velkokapacitní podlahová vpust PERFEKT s ležatým odtokem DN110, s vodní zápachovou uzávěrkou, s výškově stavitelným litinovým rámem 260x260mm a litinovou mříží, odkalovacím košem a s továrně napojenou asfaltovou izolační manžetou. Třída zatíženi M125 (12500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL86. HL615.1HW
. .............................................................................................................................................................................................................7422,- 8907,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon)
HL615.1W
921,- 1105,- s DPH
HL624
Nástavec ø195mm /260x260litina/ 226x226mm litina
4278,- 5133,- s DPH
Velkokapacitní podlahová vpust PERFEKT s ležatým odtokem DN110, s pevnou izolační přírubou, s vodní zápachovou uzávěrkou, s výškově stavitelným litinovým rámem 260x260mm a litinovou mříží, odkalovacím košem. Třída zatíženi M125 (12500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL615.1W
. .............................................................................................................................................................................................................5730,- 6876,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon)
HL616
921,- 1105,- s DPH
HL624
Nástavec ø195mm /260x260litina/ 226x226mm litina
4278,- 5133,- s DPH
Velkokapacitní vtok PERFEKT se svislým odtokem DN110 nebo DN160, s pevnou izolační přírubou, se suchou klapkou proti pronikání zápachu, s výškově stavitelným nástavcem s plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem. Třída zatíženi L15 (1500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL616/1 HL616/5 HL616L/1 HL616L/5 HL616S/1 HL616S/5 HL616K/1 HL616K/5
DN 110................................................................................................................................................................................................ 4237,- DN 160................................................................................................................................................................................................ 4237,- jako HL616/1, avšak s plastovou vtokovou mříží.................................................................................................................4157,- jako HL616/5, avšak s plastovou vtokovou mříží.................................................................................................................4157,- jako HL616/1, avšak s nerezovou vtokovou mříží..............................................................................................................9153,- jako HL616/5, avšak s nerezovou vtokovou mříží..............................................................................................................9153,- Těleso vtoku..................................................................................................................................................................................... 1961,- Těleso vtoku..................................................................................................................................................................................... 1961,-
5085,- s DPH 5085,- s DPH 4988,- s DPH 4988,- s DPH 10983,- s DPH 10983,- s DPH 2353,- s DPH 2353,- s DPH
Náhradní díly HL0606.2E Odkalovací koš HL0606.3E Zápachová klapka komplet HL621 Nástavec ø195mm/240x240/226x226mm litina
42
420,- 504,- s DPH 921,- 1105,- s DPH 1396,- 1675,- s DPH
HL622 HL623
Nástavec ø195mm/240x240/226x226mm nerez Nástavec ø195mm/240x240/226x226mm plast
7109,- 8531,- s DPH 1370,- 1644,- s DPH
®
Odpady, sifony HL616H
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Velkokapacitní vtok PERFEKT se svislým odtokem DN110 nebo DN160, se suchou klapkou proti pronikání zápachu, s výškově stavitelným nástavcem s plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem a s továrně napojenou asfaltovou izolační manžetou. Třida zatížení L15 (1500 kg). HL616H/1 HL616H/5 HL616HL/1 HL616HL/5 HL616HS/1 HL616HS/5 HL616KH/1 HL616KH/5
DN 110............................................................................................................................................................................................... 6344,- DN 160............................................................................................................................................................................................... 6344,- jako HL616H/1, avšak s plastovou vtokovou mříží.............................................................................................................6224,- jako HL616H/5, avšak s plastovou vtokovou mříží............................................................................................................6224,- jako HL616H/1, avšak s nerezovou vtokovou mříží.........................................................................................................11294,- jako HL616H/5, avšak s nerezovou vtokovou mříží.........................................................................................................11294,- Těleso vtoku.....................................................................................................................................................................................4025,- Těleso vtoku.....................................................................................................................................................................................4025,-
7613,- s DPH 7613,- s DPH 7469,- s DPH 7469,- s DPH 13553,- s DPH 13553,- s DPH 4830,- s DPH 4830,- s DPH
Náhradní díly HL0606.2E Odkalovací koš HL0606.3E Zápachová klapka komplet HL621 Nástavec ø195mm/240x240/226x226mm litina
HL616HW
420,- 504,- s DPH 921,- 1105,- s DPH 1396,- 1675,- s DPH
HL622 HL623
Nástavec ø195mm/240x240/226x226mm nerez Nástavec ø195mm/240x240/226x226mm plast
7109,- 8531,- s DPH 1370,- 1644,- s DPH
Velkokapacitní podlahová vpust PERFEKT se svislým odtokem DN110 nebo DN160, s vodní zápachovou uzávěrkou, s výškově stavitelným plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem a s továrně napojeným asfaltovým izolačním pásem. Třida zatížení L15 (1500 kg). HL616HW/1 HL616HW/5 HL616HLW/1 HL616HLW/5 HL616HSW/1 HL616HSW/5
DN 110............................................................................................................................................................................................... 6344,- DN 160............................................................................................................................................................................................... 6344,- jako HL616H/1, avšak s plastovou vtokovou mříží.............................................................................................................6224,- jako HL616H/5, avšak s plastovou vtokovou mříží............................................................................................................6224,- jako HL616H/1, avšak s nerezovou vtokovou mříží.........................................................................................................11294,- jako HL616H/5, avšak s nerezovou vtokovou mříží.........................................................................................................11294,-
7613,- s DPH 7613,- s DPH 7469,- s DPH 7469,- s DPH 13553,- s DPH 13553,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon) HL621 Nástavec ø195mm/240x240/226x226mm litina
HL616W
1396,- 1675,- s DPH
HL623
Nástavec ø195mm/240x240/226x226mm nerez Nástavec ø195mm/240x240/226x226mm plast
7109,- 8531,- s DPH 1370,- 1644,- s DPH
DN 110................................................................................................................................................................................................ 4237,- DN 160................................................................................................................................................................................................ 4237,- jako HL616W/1, avšak s plastovou vtokovou mříží.............................................................................................................4157,- jako HL616W/5, avšak s plastovou vtokovou mříží.............................................................................................................4157,- jako HL616W/1, avšak s nerezovou vtokovou mříží..........................................................................................................9153,- jako HL616W/5, avšak s nerezovou vtokovou mříží..........................................................................................................9153,-
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon) HL621 Nástavec ø195mm/240x240/226x226mm litina
HL622
Velkokapacitní podlahová vpust PERFEKT se svislým odtokem DN110 nebo DN160, s pevnou izolační přírubou, s vodní zápachovou uzávěrkou, s výškově stavitelným plastovým rámem 240x240mm a litinovou mříží, odkalovacím košem.Třida zatížení L15 (1500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL616W/1 HL616W/5 HL616LW/1 HL616LW/5 HL616SW/1 HL616SW/5
HL616.1
921,- 1105,- s DPH
921,- 1105,- s DPH
HL622
1396,- 1675,- s DPH
HL623
Nástavec ø195mm/240x240/226x226mm nerez Nástavec ø195mm/240x240/226x226mm plast
5085,- s DPH 5085,- s DPH 4988,- s DPH 4988,- s DPH 10983,- s DPH 10983,- s DPH
7109,- 8531,- s DPH 1370,- 1644,- s DPH
Velkokapacitní vtok PERFEKT se svislým odtokem DN110 nebo DN160, s pevnou izolační přírubou, se suchou klapkou proti pronikání zápachu, s výškově stavitelným litinovým rámem 260x260mm a litinovou mříží, odkalovacím košem. Třída zatíženi M125 (12500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL616.1/1 HL616.1/5
DN 110................................................................................................................................................................................................5730,- 6876,- s DPH DN 160................................................................................................................................................................................................5730,- 6876,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon)
HL616.1H
921,- 1105,- s DPH
HL624
Nástavec ø195mm /260x260litina/ 226x226mm litina
4278,- 5133,- s DPH
Velkokapacitní vtok PERFEKT se svislým odtokem DN110 nebo DN160, se suchou klapkou proti pronikání zápachu, s výškově stavitelným litinovým rámem 260x260mm a litinovou mříží, odkalovacím košem a s továrně napojenou asfaltovou izolační manžetou.. Třída zatíženi M125 (12500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL616.1H/1 HL616.1H/5
DN 110................................................................................................................................................................................................7422,- 8907,- s DPH DN 160................................................................................................................................................................................................7422,- 8907,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon) HL608.1 Nástavec s litinovým rámem pro rošt
HL616.1HW
921,- 1105,- s DPH 3283,- 3939,- s DPH
HL624
Nástavec ø195mm /260x260litina/ 226x226mm litina
4278,- 5133,- s DPH
Velkokapacitní podlahová vpust PERFEKT se svislým odtokem DN110 nebo DN160, s vodní zápachovou uzávěrkou, s výškově stavitelným litinovým rámem 260x260mm a litinovou mříží, odkalovacím košem a s továrně napojenou asfaltovou izolační manžetou. Třída zatíženi M125 (12500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL616.1HW/1 DN 110................................................................................................................................................................................................7422,- 8907,- s DPH HL616.1HW/5 DN 160................................................................................................................................................................................................7422,- 8907,- s DPH Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon)
921,- 1105,- s DPH
HL624
Nástavec ø195mm /260x260litina/ 226x226mm litina
4278,- 5133,- s DPH
43
®
Odpady, sifony HL616.1W
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Velkokapacitní podlahová vpust PERFEKT se svislým odtokem DN110 nebo DN160, s pevnou izolační přírubou, s vodní zápachovou uzávěrkou, s výškově stavitelným litinovým rámem 260x260mm a litinovou mříží, odkalovacím košem. Třída zatíženi M125 (12500 kg). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL616.1W/1 HL616.1W/5
DN 110................................................................................................................................................................................................5730,- 6876,- s DPH DN 160................................................................................................................................................................................................5730,- 6876,- s DPH
Náhradní díly HL0605.2E Vodní zápachový uzávěr komplet(sifon)
HL618
921,- 1105,- s DPH
HL624
Nástavec ø195mm /260x260litina/ 226x226mm litina
4278,- 5133,- s DPH
Nástavec ø195 mm s pevnou izolační přírubou . Vhodná pro ”Perfekt serii odtoků” : HL605(..), HL606(..), HL615(..).., HL616(..).. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 86. HL618
ø195mm, h= 155mm.....................................................................................................................................................................1580,- 1896,- s DPH
Náhradní díly HL01056D O-kroužek 180x6mm
HL618H
157,-
188,- s DPH
Nástavec ø195 mm s pevnou izolační přírubou a s továrně napojenou asfaltovou izolační manžetou. Vhodný pro ”Perfekt serii odtoků” : jsou HL605(..), HL606(..), HL615(..).., HL616(..).. HL618H
ø195mm, h= 155mm......................................................................................................................................................................4115,- 4938,- s DPH
Náhradní díly HL01056D O-kroužek 180x6mm
HL619
188,- s DPH
Fixační spona pro nástavce HL618(H), HL620 do tělesa vtoků HL615 a HL616 a pro nástavce HL 85N(H), HL 85NC, do těles vtoků HL 70, HL 80, HL 90, HL 300, HL 304, HL 310N, HL 510N HL619
HL620
157,-
. ...............................................................................................................................................................................................................609,-
730,- s DPH
Prodlužovací nástavec ø195mm pro ”Perfekt“ serii odtoků: HL615(..).., HL616(..)..a nástavce HL618(H) HL620
ø195mm, h= 125mm..................................................................................................................................................................... 1153,- 1383,- s DPH
Náhradní díly HL01056D O-kroužek 180x6mm
HL621-624
157,-
188,- s DPH
Nástavce k ”Perfekt serii odtoků” s rámem a mříží HL621 Nástavec d195mm s plastovým rámem 240x240mm, s litinovou mříží 226x226mm.....................................................1396,- HL622 Nástavec d195mm s plastovým rámem 240x240mm, s mříží z nerezové oceli 226x226mm.......................................7109,- HL622/S Nástavec d195mm s plastovým rámem 240x240mm, s mříží z nerezové oceli V4A 226x226mm..............................7698,- HL623 Nástavec d195mm s plastovým rámem 240x240mm, s plastovou mříží 226x226mm...................................................1370,- HL624 Nástavec d195mm s litinovým rámem 260x260mm, s litinovou mříží 226x226mm.......................................................4278,- HL624V Nástavec d195mm s litinovým rámem 260x260mm, s litinovou mříží 226x226mm připevněnou šrouby do rámu.............................................................................................................................................................. 4685,-
HL635
1675,- s DPH 8531,- s DPH 9238,- s DPH 1644,- s DPH 5133,- s DPH 5622,- s DPH
Drenážní nástavec 362x362mm/240x240mm s Alu revizní mříží pro ozeleněné střechy HL635
výška 100mm...................................................................................................................................................................................7271,- 8725,- s DPH
Náhradní díly HL0635.1E Alu revizní mřížka 240x240mm včetně šroubů
HL660/2
1719,- 2063,- s DPH
HL636
Drenážní nástavec 93mm/362x362mm
5445,- 6533,- s DPH
Lapač střešních splavenin DN 125/110 s košem pro zachytávání nečistot, suchá, nezámrzná a pachonepropustná klapka. Jednoduché vylamovací kroužky pro svody ø75, 90, 100, 110 mm. Zaručená kapacita odtoku 360 l/min. HL660/2 HL660/2-80
DN 125/110..........................................................................................................................................................................................784,- DN 125/110 s těsnícím kroužkem ø80 mm..............................................................................................................................784,-
941,- s DPH 941,- s DPH
Náhradní díly
HL660E
HL0600.1E Těsnící kroužky (vystřeďovací) 75, 90, 100, 110mm 229,HL0600.02E koš na listí bez úchytu pro HL660/2 a HL660E 126,HL0600.3E Čistící kryt 553,HL0600.4E Klapka pro zápachový uzávěr 229,-
274,- s DPH 151,- s DPH 664,- s DPH 274,- s DPH
Příslušenství HL0600.0E Těsnící kroužek pro litinové potrubí (ø120 mm)300,HL0600.5E Těsnící kroužek 80 -100mm 229,HL0600.7E Těsnící kroužek ø80 91,HL0600.8E Těsnící kroužek ø120 k HL600/2 91,-
360,- s DPH 274,- s DPH 109,- s DPH 109,- s DPH
Lapač střešních splavenin s odtokem DN125/110 s košem pro zachytávání nečistot, suchá-nezámrzná a pachonepropustná klapka. S jednodílným vystřeďovacím kroužkem s otvory pro vyříznutí připojení svodných dešťových potrubí pr. 75/90/100/110/120mm. Odtoková kapacita 360l/min. HL660E
DN 110/125 jednodílný vystřeďovací kroužek pr. 75/90/100/110/120mm................................................................. 573,-
Náhradní díly HL0600.10E Jednodílný vystřeďovací kroužek pr. 75/90/100/110/120mm 93,HL0600.02E koš na listí bez úchytu pro HL660/2 a HL660E 126,-
44
111,- s DPH 151,- s DPH
687,- s DPH
®
Odpady, sifony HL660G
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Lapač střešních splavenin DN125/110 s litinovým rámem, s košem pro zachytávání nečistot, suchá-nezámrzná a pachonepropustná klapka. Je určen pro připojení litinových svodných dešťových potrubí pr. 100mm (max. vnější průměr potrubí 120mm) + vystřeďovací kroužek pro plastová potrubí pr. 75,90,100 a 110mm. Odtoková kapacita 360l/sec. Vhodný pro památkově chráněné objekty a historické zóny měst, rekonstrukce zámečků, kostelů atd... HL660G
DN 125/110........................................................................................................................................................................................3420,- 4104,- s DPH
Náhradní díly HL0600.11E Jednodílný vystřeďovací kroužek pr. 75/90/100/110mm
HL680
. .............................................................................................................................................................................................................7825,- 9390,- s DPH
Sklepní a dvorní odtok ”Klenk klapka” s ležatým odtokem s automatickou klapkou jako krátkodobým vztlakovým uzávěrem proti vzduté vodě a suchým protizápachovou uzávěrkou, těleso a rošt (238 x 238 mm) z plastu(ABS). Třída zatížení L15 (1500kg). Maximální průtok: 90 l/ min. HL681
HL703
200,- s DPH
Sklepní a dvorní odtok ”Klenk klapka” se svislým odtokem s automatickou klapkou jako krátkodobým vztlakovým uzávěrem proti vzduté vodě a suchým protizápachovou uzávěrkou, těleso a rošt (230 x 230 mm) z plastu (ABS). Stavební výška 190mm. Třída zatížení L15 (1500kg). Maximální průtok: 90 l/min. HL680
HL681
167,-
. .............................................................................................................................................................................................................7825,- 9390,- s DPH
Napojovací trubka pro záchodovou mísu se zpětnou klapkou. Napojení záchodových mís, kde hrozí zpětný průtok vody, způsobený chybným řešením kanalizačního potrubí. Výrobek nelze považovat za klasickou zpětnou armaturu proti vzduté vodě!! HL703
DN 110............................................................................................................................................................................................... 3844,- 4613,- s DPH
Náhradní díly HL0203.1E Nástrčný kroužek 124x78mm
HL710.0 - HL720.0
118,-
142,- s DPH
HL01025D Pryžová manžeta 125x111mm
129,-
155,- s DPH
Žabí (koncová) klapka, automaticky fungující klapka z nerezové oceli. HL710.0 HL712.0 HL715.0 HL720.0
DN 110................................................................................................................................................................................................5042,- DN 125................................................................................................................................................................................................5955,- DN 160................................................................................................................................................................................................6953,- DN 200..............................................................................................................................................................................................10212,-
6050,- s DPH 7147,- s DPH 8343,- s DPH 12255,- s DPH
Náhradní díly Náhradní díly k HL710.0 a HL712.0 HL01064D Břitové těsnění DN110 44,53,- s DPH HL01020D Břitové těsnění DN125 92,- 110,- s DPH HL0710.30E Čistící kryt nový k HL710(.0) a HL712(.0) 979,- 1174,- s DPH HL0710.32E Závěrná klapka kompletní nová k HL710(.0)(.1)(.2)(.2EPC) a HL712(.0)(.1)(.2)(.2EPC) 2508,- 3010,- s DPH HL01077D Těsnění klapky nové k HL710(.1) a HL712(.1) 592,- 711,- s DPH HL0710.8E Matice šroubů ke krytu ( 4 Ks) 560,- 672,- s DPH Náhradní díly k HL715.0 HL01090D Břitové těsnění DN160 HL0710.33E Čistící kryt nový k HL715(.0)(.1)(.2)
HL710 - HL720
76,91,- s DPH 979,- 1174,- s DPH
HL01080D Těsnění klapky nové provedení k HL715(.0)(.1)(.2) HL0710.8E Matice šroubů ke krytu ( 4 Ks) Náhradní díly k HL720.0 HL01033D Těsnění klapky k HL720(.0) HL01091D Břitové těsnění DN200 HL0710.14E Hrdlová příruba DN200 HL0710.3E Závěrná klapka k HL720(.0)(.1)(.2) HL0710.5E Čistící kryt k HL720(.2) HL0710.8E Matice šroubů ke krytu ( 4 Ks)
592,560,-
711,- s DPH 672,- s DPH
696,- 836,- s DPH 76,91,- s DPH 2305,- 2766,- s DPH 2808,- 3369,- s DPH 1395,- 1674,- s DPH 560,- 672,- s DPH
Automatická zpětná armatura proti vzduté vodě s klapkou z nerezové oceli a revizním čistícím krytem. Pro odpadní vody bez obsahu fekálií. Dle ČSN EN 13564-1, typ 0. HL710 HL712 HL715 HL720
DN 110................................................................................................................................................................................................5042,- DN 125................................................................................................................................................................................................5955,- DN 160................................................................................................................................................................................................6953,- DN 200..............................................................................................................................................................................................10212,-
6050,- s DPH 7147,- s DPH 8343,- s DPH 12255,- s DPH
Náhradní díly Náhradní díly k HL710 a HL712 HL01064D Břitové těsnění DN110 44,53,- s DPH HL01020D Břitové těsnění DN125 92,- 110,- s DPH HL01078D Těsnění k čistícímu krytu - nové provedení 529,- 635,- s DPH HL0710.30E Čistící kryt nový k HL710(.0) a HL712(.0) 979,- 1174,- s DPH HL0710.32E Závěrná klapka kompletní nová k HL710(.0)(.1)(.2)(.2EPC) a HL712(.0)(.1)(.2)(.2EPC) 2508,- 3010,- s DPH HL01077D Těsnění klapky nové k HL710(.1) a HL712(.1) 592,- 711,- s DPH HL0710.8E Matice šroubů ke krytu ( 4 Ks) 560,- 672,- s DPH Náhradní díly k HL715 HL01081D Těsnění k čistícímu krytu - nové provedení HL01090D Břitové těsnění DN160 HL0710.33E Čistící kryt nový k HL715(.0)(.1)(.2)
529,- 635,- s DPH 76,91,- s DPH 979,- 1174,- s DPH
HL0710.35E Závěrná klapka kompletní nová k HL715(.0)(.1)(.2)(.2EPC) HL01080D Těsnění klapky nové provedení k HL715(.0)(.1)(.2) HL0710.8E Matice šroubů ke krytu ( 4 Ks)
2508,- 3010,- s DPH 592,560,-
711,- s DPH 672,- s DPH
Náhradní díly k HL720 HL01033D Těsnění klapky k HL720(.0) 696,- 836,- s DPH HL01091D Břitové těsnění DN200 76,91,- s DPH HL0710.14E Hrdlová příruba DN200 2305,- 2766,- s DPH HL0710.3E Závěrná klapka k HL720(.0)(.1)(.2) 2808,- 3369,- s DPH HL0710.5E Čistící kryt k HL720(.2) 1395,- 1674,- s DPH HL0710.8E Matice šroubů ke krytu ( 4 Ks) 560,- 672,- s DPH HL0710.9E Těsnění k čistícímu krytu - staré provedení 529,- 635,- s DPH
45
®
Odpady, sifony HL710.1 - HL720.1
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Automatická zpětná armatura proti vzduté vodě s klapkou z nerezové oceli a revizním čistícím krytem a s ručním nouzovým uzávěrem. Pro odpadní vody bez obsahu fekálií. Dle ČSN EN 13564-1, typ 1. HL710.1 HL712.1 HL715.1 HL720.1
DN 110................................................................................................................................................................................................7871,- DN 125................................................................................................................................................................................................9487,- DN 160............................................................................................................................................................................................. 12666,- DN 200.............................................................................................................................................................................................. 15511,-
9446,- s DPH 11385,- s DPH 15199,- s DPH 18613,- s DPH
Náhradní díly Náhradní díly k HL710.1 a HL712.1 HL01064D Břitové těsnění DN110 44,53,- s DPH HL01020D Břitové těsnění DN125 92,- 110,- s DPH HL01078D Těsnění k čistícímu krytu - nové provedení 529,- 635,- s DPH HL0710.31E Čistící kryt s ručním zajištěním nový k HL710.1(.2)(.2EPC) a HL712.1(.2)(.2EPC) 4921,- 5906,- s DPH HL0710.36E Simeringová těsnění (2ks) 168,- 201,- s DPH HL0710.32E Závěrná klapka kompletní nová k HL710(.0)(.1)(.2)(.2EPC) a HL712(.0)(.1)(.2)(.2EPC) 2508,- 3010,- s DPH HL01077D Těsnění klapky nové k HL710(.1) a HL712(.1) 592,- 711,- s DPH HL0710.8E Matice šroubů ke krytu ( 4 Ks) 560,- 672,- s DPH Náhradní díly k HL715.1 HL01081D Těsnění k čistícímu krytu - nové provedení HL01090D Břitové těsnění DN160 HL0710.34E Čistící kryt s ručním zajištěním nový k HL715.1(.2)(.2EPC)
HL710.2 - HL720.2
529,76,-
635,- s DPH 91,- s DPH
5832,- 6998,- s DPH
HL0710.36E Simeringová těsnění (2ks) HL0710.35E Závěrná klapka kompletní nová k HL715(.0)(.1)(.2)(.2EPC) HL01080D Těsnění klapky nové provedení k HL715(.0)(.1)(.2) HL0710.8E Matice šroubů ke krytu ( 4 Ks)
168,-
201,- s DPH
2508,- 3010,- s DPH 592,560,-
711,- s DPH 672,- s DPH
Náhradní díly k HL720.1 HL01033D Těsnění klapky k HL720(.0) 696,- 836,- s DPH HL01091D Břitové těsnění DN200 76,91,- s DPH HL0710.14E Hrdlová příruba DN200 2305,- 2766,- s DPH HL0710.3E Závěrná klapka k HL720(.0)(.1)(.2) 2808,- 3369,- s DPH HL0710.7E Čistící kryt s ručním zajištěním starý k HL720(.1)(.2) 5704,- 6845,- s DPH HL0710.36E Simeringová těsnění (2ks) 168,- 201,- s DPH HL0710.8E Matice šroubů ke krytu ( 4 Ks) 560,- 672,- s DPH HL0710.9E Těsnění k čistícímu krytu - staré provedení 529,- 635,- s DPH
Automatická zpětná armatura proti vzduté vodě se dvěma klapkami z nerezové oceli, s ručním nouzovým uzávěrem a revizním čistícím krytem. Pro odpadní vody s obsahem fekálií. Dle ČSN EN 13564-1, typ 2. HL710.2 HL712.2 HL715.2 HL720.2
DN 110............................................................................................................................................................................................. 10983,- DN 125..............................................................................................................................................................................................13299,- DN 160..............................................................................................................................................................................................14751,- DN 200..............................................................................................................................................................................................24267,-
13179,- s DPH 15959,- s DPH 17701,- s DPH 29120,- s DPH
Náhradní díly Náhradní díly k HL710.2 a HL712.2 HL01064D Břitové těsnění DN110 44,53,- s DPH HL01020D Břitové těsnění DN125 92,- 110,- s DPH HL01078D Těsnění k čistícímu krytu - nové provedení 529,- 635,- s DPH HL0710.0E Zkušební trubice(trychtýř ) 959,- 1151,- s DPH HL0710.31E Čistící kryt s ručním zajištěním nový k HL710.1(.2)(.2EPC) a HL712.1(.2)(.2EPC) 4921,- 5906,- s DPH HL0710.36E Simeringová těsnění (2ks) 168,- 201,- s DPH HL0710.32E Závěrná klapka kompletní nová k HL710(.0)(.1)(.2)(.2EPC) a HL712(.0)(.1)(.2)(.2EPC) 2508,- 3010,- s DPH HL01077D Těsnění klapky nové k HL710(.1) a HL712(.1) 592,- 711,- s DPH HL0710.37E Čistící kryt s s otvorem pro zkušební trubici nový k HL710.2(.2EPC) a HL712.2(.2EPC) 1174,- 1409,- s DPH HL0710.38E Zátka ke zkušebnímu otvoru s O-kroužkem 310,- 372,- s DPH HL0710.8E Matice šroubů ke krytu ( 4 Ks) 560,- 672,- s DPH Náhradní díly k HL715.2 HL01081D Těsnění k čistícímu krytu - nové provedení HL01090D Břitové těsnění DN160 HL0710.0E Zkušební trubice(trychtýř ) HL0710.34E Čistící kryt s ručním zajištěním nový k HL715.1(.2)(.2EPC) HL0710.36E Simeringová těsnění (2ks)
529,- 635,- s DPH 76,91,- s DPH 959,- 1151,- s DPH 5832,- 6998,- s DPH 168,- 201,- s DPH
HL0710.35E Závěrná klapka kompletní nová k HL715(.0)(.1)(.2)(.2EPC) 2508,- 3010,- s DPH HL01080D Těsnění klapky nové provedení k HL715(.0)(.1)(.2) 592,- 711,- s DPH HL0710.39E Čistící kryt s s otvorem pro zkušební trubici nový k HL715.2(.2EPC) 1543,- 1852,- s DPH HL0710.38E Zátka ke zkušebnímu otvoru s O-kroužkem 310,- 372,- s DPH HL0710.8E Matice šroubů ke krytu ( 4 Ks) 560,- 672,- s DPH Náhradní díly k HL720.2 HL01033D Těsnění klapky k HL720(.0) HL01091D Břitové těsnění DN200 HL0710.0E Zkušební trubice(trychtýř ) HL0710.14E Hrdlová příruba DN200 HL0710.3E Závěrná klapka k HL720(.0)(.1)(.2) HL0710.40E Čistící kryt s s otvorem pro zkušební trubici starý k HL720.2 HL0710.38E Zátka ke zkušebnímu otvoru s O-kroužkem HL0710.7E Čistící kryt s ručním zajištěním starý k HL720(.1)(.2) HL0710.36E Simeringová těsnění (2ks) HL0710.9E Těsnění k čistícímu krytu - staré provedení
696,- 836,- s DPH 76,91,- s DPH 959,- 1151,- s DPH 2305,- 2766,- s DPH 2808,- 3369,- s DPH 1633,- 1959,- s DPH 310,- 372,- s DPH 5704,- 6845,- s DPH 168,- 201,- s DPH 529,- 635,- s DPH
HL710.2EPC - HL715.2EPC Automatická zpětná armatura proti vzduté vodě s elektronicky řízeným uzávěrem klapky s ručním nouzovým uzávěrem druhé klapky
a revizním čistícím krytem. S optickou a akustickou signalizací na ovládacím modulu. S možností vedení signálu po budově. vyžádejte si návod k instalaci a obsluze před zakoupením výrobku! Dle ČSN EN 13564-1, typ 3.
HL710.2EPC HL712.2EPC HL715.2EPC
DN 110 Pro odpadní vody s obsahem fekálií.....................................................................................................................58411,- 70094,- s DPH DN 125 Pro odpadní vody s obsahem fekálií.....................................................................................................................62041,- 74449,- s DPH DN 160 Pro odpadní vody s obsahem fekálií...................................................................................................................65698,- 78837,- s DPH
Náhradní díly Náhradní díly k HL710.2EPC a HL712.2EPC HL01064D Břitové těsnění DN110 44,53,- s DPH HL01020D Břitové těsnění DN125 92,- 110,- s DPH HL01078D Těsnění k čistícímu krytu - nové provedení 529,- 635,- s DPH HL0710.0E Zkušební trubice (trychtýř) 959,- 1151,- s DPH HL0710.31E Čistící kryt s ručním zajištěním nový k HL710.1(.2)(.2EPC) a HL712.1(.2)(.2EPC) 4921,- 5906,- s DPH HL0710.36E Simeringová těsnění (2ks) 168,- 201,- s DPH HL0710.8E Matice šroubů ke krytu ( 4 Ks) 560,- 672,- s DPH HL0710EN.A Záložní akumulátor 12V 6322,- 7587,- s DPH HL0710E.K Kabel k modulu 6m 2735,- 3282,- s DPH HL0710E.1E Motorem ovládaná závěrná klapka k HL710.2EPC a HL712.2EPC 2869,- 3442,- s DPH HL01077D Těsnění klapky nové provedení 592,- 711,- s DPH HL0710E.4E Čistící kryt s motorem a sondou k HL710.2EPC a HL712.2EPC 26649,- 31979,- s DPH HL0710.38E Zátka ke zkušebnímu otvoru s O-kroužkem 310,- 372,- s DPH HL0710E.SW Sonda s PG- závitem 9981,- 11977,- s DPH HL0710E.7E Závěrná klapka kompletní s nouz. uzávěrem 2347,- 2817,- s DPH HL0710E.8E Ochranný kryt motoru 884,- 1060,- s DPH
46
Náhradní díly k HL715.2EPC HL01081D Těsnění k čistícímu krytu nové provedení 529,HL01090D Břitové těsnění DN160 76,HL0710.0E Zkušební trubice(trychtýř ) 959,HL0710.34E Čistící kryt s ručním zajištěním nový k HL715.1(.2)(.2EPC) 5832,HL0710.36E Simeringová těsnění (2ks) 168,HL0710.8E Matice šroubů ke krytu(4ks) 560,HL0710EN.A Záložní akumulátor 12V 6322,HL0710E.K Kabel k modulu 6m 2735,HL0715E.1E Motorem ovládaná závěrná klapka k HL715.2EPC 7486,HL01080D Těsnění klapky nové provedení 592,HL0715E.4E Čistící kryt s motorem a sondou k HL715.2EPC 28062,HL0710.38E Zátka ke zkušebnímu otvoru s O-kroužkem 310,HL0710E.SW Sonda s PG- závitem 9981,HL0715E.7E Závěrná klapka kompletní s nouz. uzávěrem 2347,HL01080D Těsnění klapky nové provedení 592,HL0715E.8E Ochranný kryt motoru 884,-
635,- s DPH 91,- s DPH 1151,- s DPH 6998,- s DPH 201,- s DPH 672,- s DPH 7587,- s DPH 3282,- s DPH 8983,- s DPH 711,- s DPH 33675,- s DPH 372,- s DPH 11977,- s DPH 2817,- s DPH 711,- s DPH 1060,- s DPH
®
Odpady, sifony HL800
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Těsnicí manžeta s asfaltovou izolační manžetou, určená pro těsné prostupy kanalizačních potrubí hydroizolací spodní stavby/základové desky a k izolaci proti půdní vlhkosti. Odzkoušená na těsnost proti pronikání plynu, vody (do 0,6bar) a difúzi radonu. Není určena pro skladby střešního pláště. Montážní návod na konci ceníku. HL800/110 HL800/125 HL800/160
DN110..................................................................................................................................................................................................3456,- 4147,- s DPH DN125................................................................................................................................................................................................. 3507,- 4209,- s DPH DN160.................................................................................................................................................................................................4010,- 4812,- s DPH
Náhradní díly HL0800.1E Svěrná matice DN110 HL0800.3E Svěrná matice DN125
HL801
687,- s DPH 706,- s DPH
HL0800.2E Svěrná matice DN160
577,-
692,- s DPH
Sdružená těsnicí tvarovka pro prostup technických vedení (potrubí a kabelů) od pr. 8 mm do pr. 52 mm je určena k těsnému prostupu přes hydroizolace konstrukcí ( vnější obvodových zdí sklepů, základových desek atd.). K použití s potrubní průchodkou HL800/160. Po vylomení odpovídajícího kruhového otvoru (M32-63) a použití vhodného prostupového šroubení je možné vést až čtyři potrubní - kabelová vedení. Vyhledávač kombinací prostupových šroubení na www.hutteter-lechner.com v oddíle „pokyny k instalaci“ HL801
HL801V
573,588,-
. .............................................................................................................................................................................................................1255,- 1505,- s DPH
Prostupové šroubení k HL801 k prostupu hladkých potrubí a kabelů HL801V/8-14 Prostupové šroubení k HL801 k prostupu hladkých potrubí a kabelů od pr.8 mm - pr.14 mm...........................177,- 213,- s DPH HL801V/11-18 Prostupové šroubení k HL801 k prostupu hladkých potrubí a kabelů od pr.11 mm - pr.18 mm.........................177,- 213,- s DPH HL801V/17-25 Prostupové šroubení k HL801 k prostupu hladkých potrubí a kabelů od pr.17 mm - pr.25 mm....................... 229,- 274,- s DPH HL801V/22-33 Prostupové šroubení k HL801 k prostupu hladkých potrubí a kabelů od pr.22 mm - pr.33 mm...................... 572,- 686,- s DPH HL801V/28-38 Prostupové šroubení k HL801 k prostupu hladkých potrubí a kabelů od pr.28 mm - pr.38 mm......................844,- 1012,- s DPH HL801V/32-44 Prostupové šroubení k HL801 k prostupu hladkých potrubí a kabelů od pr.32 mm - pr.44 mm.................... 1015,- 1217,- s DPH HL801V/40-52 Prostupové šroubení k HL801 k prostupu hladkých potrubí a kabelů od pr.40 mm - pr.52 mm.................... 1691,- 2030,- s DPH
HL801R
Redukční šroubení k HL801 k prostupu hladkých potrubí a kabelů HL801R/M32-25 Redukční šroubení M32-25 k HL801 pro prostup vedení od pr.8 mm - pr.14 mm nebo pr.11 mm - pr.18 mm.....................................................................................................................................................................197,- HL801R/M40-25 Redukční šroubení M40-25 k HL801 pro prostup vedení od pr.8 mm - pr.14 mm nebo pr.11 mm - pr.18 mm..........................................................................................................................................................331,- HL801R/M40-32 Redukční šroubení M40-32 k HL801 pro prostup vedení od pr.17 mm - pr.25 mm.............................................331,- HL801R/M50-25 Redukční šroubení M50-25 k HL801 pro prostup vedení od pr.8 mm - pr.14 mm nebo pr.11 mm - pr.18 mm.........................................................................................................................................................564,- HL801R/M50-32 Redukční šroubení M50-32 k HL801 pro prostup vedení od pr.17 mm - pr.25 mm............................................564,- HL801R/M50-40 Redukční šroubení M50-40 k HL801 pro prostup vedení od pr.22 mm - pr.33 mm...........................................564,- HL801R/M63-32 Redukční šroubení M63-32 k HL801 pro prostup vedení od pr.17 mm - pr.25mm..............................................827,- HL801R/M63-40 Redukční šroubení M63-40 k HL801 pro prostup vedení od pr.22mm - pr.33mm..............................................827,- HL801R/M63-50 Redukční šroubení M63-50 k HL801 pro prostup vedení od pr.28mm - pr.38mm..............................................827,-
HL801B
Záslepka M32 k uzavření chybně vylomeného otvoru M32........................................................................................... 178,- Záslepka M40 k uzavření chybně vylomeného otvoru M40............................................................................................287,- Záslepka M50 k uzavření chybně vylomeného otvoru M50...........................................................................................366,- Záslepka M63 k uzavření chybně vylomeného otvoru M63............................................................................................471,-
214,- s DPH 345,- s DPH 439,- s DPH 565,- s DPH
DN 50.....................................................................................................................................................................................................719,- 863,- s DPH DN 75....................................................................................................................................................................................................845,- 1014,- s DPH DN 110...................................................................................................................................................................................................631,- 758,- s DPH
Větrací hlavice HL805.0 HL807.0 HL810.0
HL805.1, 807.1, 810.1
677,- s DPH 677,- s DPH 677,- s DPH 993,- s DPH 993,- s DPH 993,- s DPH
Souprava větrací hlavice HL805 HL807 HL810
HL805.0, 807.0, 810.0
397,- s DPH 397,- s DPH
Záslepka pro případné uzavření chybně vylomeného otvoru. HL801B/M32 HL801B/M40 HL801B/M50 HL801B/M63
HL805, 807, 810
236,- s DPH
DN 50....................................................................................................................................................................................................508,- DN 75....................................................................................................................................................................................................608,- DN 110..................................................................................................................................................................................................706,-
609,- s DPH 729,- s DPH 847,- s DPH
Krycí růžice pro větrací potrubí HL805.1 HL807.1 HL810.1
DN 50.....................................................................................................................................................................................................197,- DN 75.....................................................................................................................................................................................................241,- DN 110..................................................................................................................................................................................................268,-
236,- s DPH 289,- s DPH 321,- s DPH
47
®
Odpady, sifony HL900N(ECO)
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Kanalizační přivzdušňovací ventil odpovídající EN 12 380-1 s masivní pryžovou membránou, s odnímatelnou mřížkou proti hmyzu (pro jednoduché čištění). S dvojitou stěnou pro dobré tepelně izolační vlastnosti. Zařazen do třídy A1, vyhověl i pro použití v rozmezí teplot -40°C až +60°C a pro použití i pod úrovní vody v zařizovacích předmětech. Informace o použití, průtokových kapacitách v návaznosti na ČSN EN12056-2 naleznete na konci ceníku. Množství vzduchu přisávané dle EN 12380 činí 37l/s. HL900N DN 50/75/110...................................................................................................................................................................................1295,- 1554,- s DPH HL900NECO DN110.....................................................................................................................................................................................................887,- 1064,- s DPH HL901 DN75/90/110, tř. A I, tep. Izolovaný, množství vzduchu 32l/s, ploché provedení..................................................1220,- 1464,- s DPH Náhradní díly HL0900.1E Redukce 50/75 HL01067D O-kroužek 92x4mm
HL902
378,25,-
454,- s DPH 30,- s DPH
HL0900.2E Ochranná mřížka proti hmyzu
176,-
211,- s DPH
Kanalizační přivzdušňovací ventil s převlečnou maticí 1” HL902
. ............................................................................................................................................................................................................... 453,-
544,- s DPH
Náhradní díly HL01050D O- kroužek 18x2,5 mm
HL902T
21,-
25,- s DPH
Kanalizační přivzdušňovací ventil 1”, T-kus DN 32 nebo DN 40 HL902T/30 HL902T/40
DN 32.................................................................................................................................................................................................... 759,- DN 40.................................................................................................................................................................................................... 759,-
911,- s DPH 911,- s DPH
Náhradní díly HL0902.1E T - tvarovka DN 32x5/4”se závitem 1” a těsněním HL0902.2E T - tvarovka DN 40x6/4”se závitem 1” a těsněním HL01007D Klínové těsnění T 30 (HL902T/30)
HL903
367,- s DPH
306,21,-
367,- s DPH 25,- s DPH
HL01008D HL01046D HL01047D HL902
Klínové těsnění T 40 (HL902T/40) Převlečná matice 5/4” (HL902T/30) Převlečná matice 6/4” (HL902T/40) Přivzdušňovací ventil 1”
21,58,58,453,-
25,- s DPH 69,- s DPH 69,- s DPH 544,- s DPH
Kanalizační přivzdušňovací ventil odpovídající EN12380-1 s odnímatelnou mřížkou proti hmyzu (pro jednoduché čištění). S dvojitou stěnou pro lepší izolační vlastnosti, s redukčním kusem (adaptér) v dimezích DN50/40/32. Zařazen do třídy A1- vyhověl i pro použití v rozmezí teplot -20 Caž +60C a pro použití pod úrovní vody v zařizovacích předmětech. Množství vzduchu přisávané dle EN 12380 činí 8l/s. HL903
HL904
306,-
. ................................................................................................................................................................................................................667,-
801,- s DPH
Přivzdušňovací ventil odpovídající EN 12 380-1 s přechodovým kusem (adaptér) v dimenzích DN 50/40/32. Zařazen do třídy A1, vyhověl i pro použití v rozmezí teplot -20°C až +60°C a pro použití i pod úrovní vody v zařizovacích předmětech. Informace o použití, průtokových kapacitách v návaznosti na ČSN EN12056-2 naleznete na posldníxh stranách ceníku. Množství vzduchu přisávané dle EN 12380 činí 5l/s. HL904
DN40..................................................................................................................................................................................................... 514,-
617,- s DPH
Náhradní díly HL01008D Klínové těsnění T40 HL01047D Převlečná matice 6/4”
HL904T
21,58,-
25,- s DPH 69,- s DPH
HL0904.0E Připojovací adaptér
185,-
222,- s DPH
Přivzdušňovací ventil s T- tvarovkou pro horizontální připojení HL904T
DN 40.................................................................................................................................................................................................... 759,-
911,- s DPH
Náhradní díly HL0904.1E T- tvarovka DN40x6/4” HL904 Přivzdušňovací ventil
HL2000
229,514,-
274,- s DPH 617,- s DPH
Zápachová uzávěrka PRIMUS je nový - revoluční systém zápachové uzávěrky Funguje jak s, tak i bez přítomnosti vody! Za přítomnosti vody v uzávěrce je plovák sifonu nadlehčován a o zápachotěsnost se stará vodní sloupec. Po vyschnutí vody se plovák usadí na odtokový přepad a znemožní tím pronikání plynů z kanalizace do vnitřních prostor budovy i za suchého stavu.. Tímto nabízí perfektní zápachotěsnost za každých odmínek. Je tedy vhodný do všech málo udržovaných prostorů jako jsou kotelny, strojovny bazénové techniky a jednotek vzduchotechnických, v místech s temperovanými podlahami, sezónních domů,...atd. Vhodný do kombinací se vtoky: HL510N(G)(R), HL310N(G((R)... HL2000 HL2000KK
pro nástavce s plastovým rámem...............................................................................................................................................387,- pro systém Klick Klack....................................................................................................................................................................443,-
464,- s DPH 531,- s DPH
Náhradní díly HL02000.1E plovák k Primusu HL2000 HL01067D O-kroužek 92x4mm
HL2090
195,25,-
234,- s DPH 30,- s DPH
HL01086D O-kroužek 88x5mm pro Klick Klack
29,-
35,- s DPH
Vodní zápachová uzávěrka PRIMUS - ploché provedení - hladina vody v ZU 30 mm. Vhodný do pro: HL90Pr HL2090 HL2090KK
pro nástavce s plastovým rámem..............................................................................................................................................380,- pro systém Klick Klack.................................................................................................................................................................... 435,-
456,- s DPH 522,- s DPH
Náhradní díly HL01067D HL01086D HL02090.1E
48
O-kroužek 92x4mm O-kroužek 88x5mm pro Klick Klack Spodní díl Primusu HL2090
25,29,224,-
30,- s DPH 35,- s DPH 268,- s DPH
HL02090.2E Plovák k Primusu HL2090 HL02090KK.1E Spodní díl Primusu HL2090KK
226,254,-
271,- s DPH 305,- s DPH
®
Odpady, sifony HL2100
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Vodní zápachová uzávěrka PRIMUS s vysokým maximálním průtokem. Vhodný: HL3100(Pr), HL5100(Pr) HL2100
pro nástavce s plastovým rámem..............................................................................................................................................730,-
876,- s DPH
Náhradní díly HL01093D O-kroužek 125x4 mm k HL3400
HL3000
35,-
42,- s DPH
Plastový nástavec ø110 mm s možností délkové úpravy s nerezovým rámem 121 x 121 mm a s vtokovou mříží z nerezové oceli 115x115 mm, třída zatížení K3 (300 kg). Vhodný pro tělesa vtoků HL 70K, HL 80K, HL 90K, HL 300K, HL 304K, HL 310NK a HL 510NK. HL3000 HL3000.1 HL3000FPr HL3000Pr
. ............................................................................................................................................................................................................. 1212,- s vodní zápachovou uzávěrkou................................................................................................................................................1372,- s plochou zápachovou uzávěrkou Primus a mřížkou PRIMUS.......................................................................................1611,- se zápachovou uzávěrkou PRIMUS a mřížkou PRIMUS................................................................................................... 1691,-
1455,- s DPH 1646,- s DPH 1933,- s DPH 2030,- s DPH
Náhradní díly HL037Pr.1E Vtoková mřížka PRIMUS z nerezové oceli 115x115mm HL037N.0E Stavební krytka 123x123 HL037N.1E Nerezová vtoková mřížka 115x115mm HL3200 Plastový nástavec s nerezovým rámem V4A 121 x 121 mm
HL3100
335,29,327,-
402,- s DPH 35,- s DPH 392,- s DPH
742,-
890,- s DPH
HL0510.7EKK Sifonová vložka komplet s O-kroužkem k systému KLICK-KLACK HL0510.8E Zvonek sifonu HL2000KK Zápachový uzávěr ”Primus” s O-kroužkem k systému KLICK-KLACK HL2090KK Zápachový uzávěr ”Primus” 30mm vody, s O-kroužkem k systému KLICK-KLACK
281,107,-
337,- s DPH 129,- s DPH
443,-
531,- s DPH
435,-
522,- s DPH
Podlahová vpust se svislým odtokem DN 50/75/110 s vodní zápachovou uzávěrkou , s vtokovou mříží z nerezové oceli 138 x 138 mm s nástavcem s nerezovým rámem ”Klick-Klak” 145x145 mm a možností délkové úpravy, třída zatížení K3 (300 kg). Kapacita průtoku: DN 50 1,25 l/s, DN 75/110 - 1,4 l/s. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 8300. HL3100 HL3100K
DN 50/75/110...................................................................................................................................................................................2025,- 2430,- s DPH těleso podlahové vpusti................................................................................................................................................................685,- 822,- s DPH
Náhradní díly HL3910.1 Plastový nástavec ø146 mm /100 mm s vtokovou mříží 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli a sifonovou vložkou 1382,- 1659,- s DPH HL03100.0E Ochraná zátka izolační příruby 84,- 101,- s DPH
C
Příslušenství HL3911 Plastový nástavec ø146 mm /100 mm s připevněnou vtokovou mříží 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli 1112,- 1335,- s DPH
Q
HL3100Pr
HL066.1E Vtoková mřížka z nerezové oceli V4A 138x138mm, s otvory pro šrouby, k objednání jako příslušenství 2770,- 3324,- s DPH HL066Q.1E Vtoková mřížka z nerezové oceli V4A QUADRA 138x138mm k objednání jako příslušenství 5249,- 6299,- s DPH HL066C.1E Vtoková mřížka z nerezové oceli V4A CUT 138x138mm k objednání jako příslušenství 5249,- 6299,- s DPH
Podlahová vpust se svislým odtokem DN 50/75/110 se zápachovou uzávěrkou PRIMUS, s vtokovou mříží z nerezové oceli 138 x 138 mm s nástavcem s nerezovým rámem ”Klick-Klak” 145x145 mm a možností délkové úpravy, třída zatížení K3 (300 kg). Kapacita průtoku: 0,8 l/s. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL8300. HL3100Pr
DN 50/75/110...................................................................................................................................................................................2328,- 2793,- s DPH
Náhradní díly HL3910Pr Plastový nástavec ø146 mm /100 mm s vtokovou mříží 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli a sifonovou vložkou ”Primus” 1687,- 2025,- s DPH HL03100.0E Ochraná zátka izolační příruby 84,- 101,- s DPH
C
HL3110
Příslušenství HL3911 Plastový nástavec ø146 mm /100 mm s připevněnou vtokovou mříží 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli 1112,- 1335,- s DPH HL066Q.1E Vtoková mřížka z nerezové oceli V4A QUADRA 138x138mm k objednání jako příslušenství 5249,- 6299,- s DPH HL066C.1E Vtoková mřížka z nerezové oceli V4A CUT 138x138mm k objednání jako příslušenství 5249,- 6299,- s DPH
Q
Nerezová vtoková mřížka 115x115mm V4A, třída zatížení K3, 300 kg HL3110
HL3120
Mřížka...................................................................................................................................................................................................686,-
823,- s DPH
Nerezová vtoková mřížka 115x115mm V4A, QUADRA, třída zatížení L15, 1,5 t HL3120
Mřížka.................................................................................................................................................................................................3987,- 4785,- s DPH
49
®
Odpady, sifony HL3121
Ceny jsou uvedeny v Kč
Nerezová vtoková mřížka 115x115mm V4A, SEINE třída zatížení L15, 1,5 t HL3121
HL3123
Mřížka................................................................................................................................................................................................. 1126,- 1351,- s DPH
Plastový nástavec s nerezovým rámem 121 x 121 mm HL3200 HL3210
HL3400
. .............................................................................................................................................................................................................3987,- 4785,- s DPH
Nerezová vtoková mřížka 115x115mm, RONDO HL3140
HL3200
Mřížka.................................................................................................................................................................................................3987,- 4785,- s DPH
Nerezová vtoková mřížka 115x115mm V4A, ”PRIMUS” Design HL3127
HL3140
Mřížka.................................................................................................................................................................................................3987,- 4785,- s DPH
Nerezová vtoková mřížka 115x115mm V4A, YUKON třída zatížení L15, 1,5 t HL3125
HL3127
Mřížka.................................................................................................................................................................................................3987,- 4785,- s DPH
Nerezová vtoková mřížka 115x115mm V4A, NIL, třída zatížení L15, 1,5 t HL3124
HL3125
Mřížka.................................................................................................................................................................................................3987,- 4785,- s DPH
Nerezová vtoková mřížka 115x115mm V4A, ORINOKO, třída zatížení L15, 1,5 t HL3123
HL3124
HL Hutterer & Lechner GmbH
Plastový nástavec s nerezovým rámem V2A......................................................................................................................... 742,- 890,- s DPH Plastový nástavec s nerezovým rámem V4A.......................................................................................................................1050,- 1259,- s DPH
Prodlužovací nástavec pro HL3100(Pr) a HL5100(Pr) HL3400
Prodlužovací nástavec h=80 mm, ø146 mm ......................................................................................................................... 275,-
330,- s DPH
Náhradní díly HL01093D O-kroužek 125x4 mm k HL3400
HL3910
35,-
42,- s DPH
Plastový nástavec ø146 mm /100 mm s vtokovou mříží z nerezové oceli (ocel V2A) 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli V4A HL3910 HL3910.1 HL3910Pr
. ............................................................................................................................................................................................................... 970,- 1164,- s DPH Se zápachovou uzávěrkou..........................................................................................................................................................1382,- 1659,- s DPH Se zápachovou uzávěrkou Primus........................................................................................................................................... 1687,- 2025,- s DPH
Náhradní díly HL2100 Zápachový uzávěr Primus HL05100.7E Sifonová vložka komplet HL03910.1E Nerezová vtoková mřížka V2A 138x138mm HL03910.2E Plastový nástavec ø146 mm / 100 mm s O-kroužkem
50
730,441,428,-
876,- s DPH 529,- s DPH 514,- s DPH
452,-
543,- s DPH
HL03910.3E Nerezová vtoková mřížka 138x138mm V4A HL03900.0E Stavební krytka rámečku 150x150mm HL01093D O-kroužek 125x4 mm k HL3400
592,91,35,-
711,- s DPH 109,- s DPH 42,- s DPH
®
Odpady, sifony HL3911
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Plastový nástavec ø146 mm /100 mm s připevněnou (šrouby) vtokovou mříží (ocel V2A) 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli V4A, vhodná pro veřejné prostory - mříž zabezpečená proti zcizení popř. proti poškození. HL3911
. ..............................................................................................................................................................................................................1112,- 1335,- s DPH
Náhradní díly HL01093D O-kroužek 125x4 mm k HL3400 HL2100 Zápachový uzávěr Primus HL05100.7E Sifonová vložka komplet HL03911.1E Nerezová vtoková mřížka V2A 138x138mm s otvory pro šrouby
HL5100
35,730,441,-
42,- s DPH 876,- s DPH 529,- s DPH
444,-
533,- s DPH
HL03911.2E Plastový nástavec ø146 mm / 100 mm s O-kroužkem a závity M6 pro šrouby HL03911.3E Šrouby M6x8 (2ks.) HL03900.0E Stavební krytka rámečku 150x150mm
624,49,91,-
749,- s DPH 59,- s DPH 109,- s DPH
Podlahová vpust s ležatým odtokem DN 50/75 s vodní zápachovou uzávěrkou, s vtokovou mříží z nerezové oceli 138 x 138 mm s nástavcem s nerezovým rámem ”Klick-Klak” 145x145 mm a možností délkové úpravy, třída zatížení K3 (300 kg). Kapacita průtoku: 1 l/s. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL8300 HL5100 HL5100K
DN 50/75............................................................................................................................................................................................2059,- 2471,- s DPH těleso podlahové vpusti................................................................................................................................................................682,- 818,- s DPH
Náhradní díly HL3910.1 Plastový nástavec ø146 mm /100 mm s vtokovou mříží 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli a sifonovou vložkou 1382,- 1659,- s DPH HL03100.0E Ochraná zátka izolační příruby 84,- 101,- s DPH C
Q
HL5100Pr
Příslušenství HL3911 Plastový nástavec ø146 mm /100 mm s připevněnou vtokovou mříží 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli 1112,- 1335,- s DPH HL066Q.1E Vtoková mřížka z nerezové oceli V4A QUADRA 138x138mm k objednání jako příslušenství 5249,- 6299,- s DPH HL066C.1E Vtoková mřížka z nerezové oceli V4A CUT 138x138mm k objednání jako příslušenství 5249,- 6299,- s DPH
Podlahová vpust s ležatým odtokem DN 50/75 se zápachovou uzávěrkou PRIMUS, s vtokovou mříží z nerezové oceli 138 x 138 mm s nástavcem s nerezovým rámem ”Klick-Klak” 145x145 mm a možností délkové úpravy, třída zatížení K3 (300 kg). Kapacita průtoku: 0,8 l/s. Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL8300. HL5100Pr
DN 50/75............................................................................................................................................................................................2325,- 2790,- s DPH
Náhradní díly
C
HL8300
HL3910Pr Plastový nástavec ø146 mm /100 mm s vtokovou mříží 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli a sifonovou vložkou ”Primus” 1687,- 2025,- s DPH HL03100.0E Ochraná zátka izolační příruby 84,- 101,- s DPH
Q
Příslušenství HL3911 Plastový nástavec ø146 mm /100 mm s připevněnou vtokovou mříží 138 x 138 mm i rámem ”Klick-Klack” 145 x 145 mm z nerezové oceli 1112,- 1335,- s DPH HL066Q.1E Vtoková mřížka z nerezové oceli V4A QUADRA 138x138mm k objednání jako příslušenství 5249,- 6299,- s DPH HL066C.1E Vtoková mřížka z nerezové oceli V4A CUT 138x138mm k objednání jako příslušenství 5249,- 6299,- s DPH
Izolační souprava složení: volná příruba z nerezové oceli, těsnící kroužek, šrouby, EPDM fólie 500 x 500 mm. Vhodná pro HL3100(Pr) a HL5100(Pr) HL8300 HL8300.0 HL8300.H HL8300.M
S EPDM fólií ..................................................................................................................................................................................... 1451,- Jako HL83, avšak bez fólie............................................................................................................................................................862,- Jako HL83, avšak s továrně nataveným živičným pásem.................................................................................................2113,- Jako HL83, avšak s montaplast B- fólií, pro stěrkové-kontaktní hydroizolace....................................................... 1451,-
1742,- s DPH 1035,- s DPH 2535,- s DPH 1742,- s DPH
Náhradní díly HL01092D Pryžové těsnění 202x218x6 mm HL086.1E Šrouby 6,3x19mm (8 Ks) HL08300.2E Příruba z nerezové oceli 238x148 mm
HL8500
143,66,675,-
172,- s DPH 79,- s DPH 810,- s DPH
HL08300.3E EPDM-fólie 500x500 mm HL08300.4E Montaplast-fólie 500x500mm HL083.H1E Šrouby 6,3x22mm (8 Ks)
362,613,50,-
434,- s DPH 735,- s DPH 61,- s DPH
Nástavec ø146 mm s pevnou izolační přírubou. Vhodná pro HL3100(Pr) a HL5100(Pr). Jako příslušenství lze objednat izolační soupravu pro napojení na vodorovné hydroizolace serie HL 8300. HL8500
výška 106mm..................................................................................................................................................................................... 951,- 1141,- s DPH
51
®
Odpady, sifony
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Zpětné armatury proti vzduté vodě Zpětné vzdutí Při umísťování zařizovacích předmětů a vpustí v podzemních podlažích a napojení vnitřní kanalizace na stokovou síť jednotné soustavy je nutno brát zřetel na zpětné vzdutí ve stokách. Ke zpětnému vzdutí ve stoce dochází zejména při přívalových deštích, na které není stoka z ekonomických důvodů dimenzována. Vzdutá voda potom proudí kanalizační přípojkou do potrubí vnitřní kanalizace a může vytékat ze vpustí a zařizovacích předmětů umístěných pod její hladinou. Výšku hladiny vzduté vody by měl sdělit provozovatel veřejné kanalizace. Pokud může ke zpětnému vzdutí dojít a výška hladiny vzduté vody není známa, považuje se za hladinu vzduté vody úroveň terénu (obvykle povrch vozovky nebo chodníku) v místě napojení kanalizační přípojky do stoky. Ochrana proti zpětnému vzdutí podle ČSN EN 12056-4 ČSN EN 12056-4 předepisuje provádět ochranu proti zpětnému vzdutí přečerpáním odpadních vod ze zařizovacích předmětů nebo vpustí nacházejících se pod její hladinou. Pokud lze tato zařízení odvodnit gravitačně, smí se pro jejich zabezpečení před vniknutím vzduté vody použít zpětných armatur, pokud: a) jsou zařizovací předměty či vpusti umístěny v podřadných místnostech při jejichž zaplavení nedojde k ohrožení zdraví obyvatel nebo ke znehodnocení cennějších věcí; b) mají uživatelé k dispozici alespoň jeden záchod umístěný nad hladinou vzduté vody; c) není nutné při zpětném vzdutí zabezpečené zařizovací předměty používat. Normalizace zpětných armatur v Evropské unii Zpětná armatura je zařízení (uzávěr) bránící při zpětném vzdutí vniknutí vzduté vody do potrubí, vpusti či zařizovacího předmětu. Zpětná armatura se instaluje do potrubí nebo může být součástí vpusti či odpadní armatury zařizovacího předmětu. Součástí zpětné armatury bývá: a) automatický uzávěr, který při zpětném vzdutí automaticky uzavírá; b) nouzový uzávěr, jenž umožňuje mechanické zpravidla ruční uzavření; c) výstražné signalizační zařízení signalizující uzavírací proces. Platná norma ČSN EN 13564-1 Zpětné armatury pro vnitřní kanalizaci rozděluje zpětné armatury podle provedení a použití na různé typy: Typ 0: Zpětná armatura určená do ležatého potrubí obsahující pouze automatický uzávěr. Tomuto typu odpovídají zpětné armatury HL 710, HL 712, HL 715 a HL 720 se samočinně fungující zpětnou klapkou. Typ 1: Zpětná armatura určená do ležatého potrubí s automatickým a nouzovým uzávěrem. Tyto zpětné armatury dodává firma HL pod označením HL 710.1, HL 712.1, HL 715.1 a HL 720.1 s přídavným ručním zajištěním samočinné zpětné klapky. Typ 2: Zpětná armatura určená do ležatého potrubí se dvěma automatickými uzávěry a jedním nouzovým uzávěrem. V sortimentu výrobků firmy HL se jedná o zpětné armatury HL710.2 HL 712.2, HL 715.2 a HL 720.2 se dvěma samočinnými zpětnými klapkami a přídavným ručním zajištěním jedné klapky. Typ 3: Zpětná armatura určená do ležatého potrubí s automatickým uzávěrem uváděným v činnost cizí energií (např. elektrickou) a s nouzovým uzávěrem, který je na automatickém uzávěru nezávislý.
52
Firma HL dodává zpětné armatury tohoto typu s elektronicky řízenou (uzavíranou) klapkou a přídavným ručním zajištěním druhé klapky. Výrobky označené HL710.2EPC, HL712.2EPC, HL715.2EPC mají optickou a akustickou signalizaci na ovládacím modulu a navíc ještě připojení pro vedení signálu po budově. V kombinaci s elektromagnetickými ventily na vodovodním potrubí je možné zajistit automatické uzavření přívodu vody při uzavření zpětné armatury. Zařizovací předměty chráněné proti vniknutí vzduté vody jsou tak bezpečně vyřazeny z provozu a nedojde k zaplavení suterénu vodou, která nemůže odtékat do kanalizace. Typ 4: Zpětná armatura, která je součástí podlahové vpusti nebo odpadní armatury zařizovacího předmětu, s automatickým a nouzovým uzávěrem. Tomuto typu odpovídají podlahové vpusti HL 70(G). Typ 5: Zpětná armatura, která je součástí podlahové vpusti nebo odpadní armatury zařizovacího předmětu, se dvěma automatickými uzávěry a jedním nouzovým uzávěrem. Tomuto typu odpovídají podlahové vpusti HL 77 a HL 77.1. Požadavky ČSN 75 6760 ČSN 75 6760 Vnitřní kanalizace platná od května 2003 předepisuje výběr typů zpětných armatur podle druhu odpadních vod, které jimi protékají a uvádí požadavky pro jejich instalaci a údržbu. Pro odpadní vody bez fekálií se mohou použít všechny typy zpětných armatur podle EN 13564-1 (tedy typy 0 až 5). Pro odpadní vody s fekáliemi (tzv. černou vodu) se smějí použít jen zpětné armatury typu 2 a 3 podle EN 13564-1. Zařizovací předměty nebo vpusti zabezpečené proti vniknutí vzduté vody se napojují na oddělené svodné potrubí se zpětnou armaturou. Na přívodním potrubí ke zpětné armatuře je v návaznosti na EN 13564-1 požadováno provést těsně před armaturou převýšení rovné nejméně 70 % světlosti přívodního potrubí, které se provede např. pomocí dvou kolen 30° až 45°. Převýšení je požadováno proto, aby voda z přívodního potrubí mohla odtéct i při malém stupni plnění. Zpětné armatury firmy HL však mají lepší vlastnosti než požaduje EN 13564-1 a její zpětné klapky otevírají při výšce plnění vody v potrubí 20mm. Tedy méně než je požadováno normou. Tato přednost umožňuje použít pro převýšení dvě kolena s úhlem 15°. Pokud se na vnitřní kanalizaci napojují drenáže odvodňující základy budovy, musí se napojení provést přes zpětnou armaturu, která při zpětném vzdutí ve stokové síti nebo ucpání kanalizace zabrání vniknutí odpadních vod z kanalizace pod budovu. Vhodné je použít zpětnou armaturu typu 0 podle EN 13564-1, aby dlouhodobým ručním uzavřením zpětné klapky nemohly být drenáže vyřazeny z provozu. Přistup ke zpětné armatuře umístěné v zemi se zajistí šachtou mající stejné rozměry jako šachta čistící. Při obdélníkovém tvaru a hloubce do 750 mm je rozměr šachty 600 x 900 mm, při větší hloubce 800 x 1000 mm. Kruhová šachta musí mít průměr 1000 mm. Poklop šachty má rozměr 600 x 900 mm. Při hloubce šachty větší než 1900 mm se může použít čtvercový nebo kruhový poklop o světlosti nejméně 600 mm. ČSN 75 6760 požaduje zpětné armatury nejméně dvakrát ročně čistit. Firma HL doporučuje provádět kontrolu a případné čištění také nejméně dvakrát ročně. S použitím materiálů firmy HL vypracoval Ing. Jakub Vrána
®
Odpady, sifony
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
HL2000, HL 2090, HL2100 Zápachový uzávěr „Primus” Systém Primus je nový systém zápachového uzávěru. Funguje jak s, tak i bez přítomnosti vody. Zápach způsobený vyschnutím podlahové vpusti je tedy již minulostí.Primus pracuje na jedné straně jako běžný zápachový uzávěr s vodním uzávěrem, na straně druhé na principu gravitace. Za přítomnosti vody v uzávěrce je zvonek nadlehčován a o zápachtěsnost se stará vodní sloupec. Po vyschnutí vody se plovák usadí na odtokový přepad a znemožní tím pronikání plynů i za suchého stavu. Tímto nabízí systém perfektní zápachotěsnost za každých podmínek. HL2000 se vkládá do HL nástavce (ø 110mm). Je k dispozici
pro: HL310N, HL510N a HL70. Řada se postupně rozšiřuje. Sériově jsou již k dodání včetně HL2000 (průtok 0,5 l/s) vtoky pod označením HL310NPr(R) a HL510NPr(R). Zároveň jsou také sériově vyráběny vtoky s rámečkem i mřížkou z litiny 140 x 140mm v provedeních HL310NPrG a HL510NPrG včetně HL2000. Sériově jsou již k dodání včetně HL2100 (průtok 0,8 l/s) vtoky série HL60 PLUSpod označením HL3100Pr a HL5100Pr. Nový plochý PRIMUS HL2090 (průtok 0,43 l/s) je součástí podlahové vpusti HL90Pr. HL2090 má výšku vody v zápachové uzávěrce 30 mm.
Montážní návod
k připojení vyhřívací sady u střešních vtoků provedení HL62.1, HL63.1, HL64.1 a jejich kombinací a vyhřívací sady HL82 a HL609 pro terasové resp. dvorní vtoky. Topný pás se připojuje vždy přes připojovací kabel na 220-230V. Připojovací kabel je 0,80m dlouhý. Připojení je vhodné udělat v el. krabici pod stropní konstrukcí s ohledem na místní podmínky zvláště na tloušťku konstrukce vzhledem k délce připojovacího kabelu. Automatický jistič musí vykazovat charakteristiku C. Je potřeba počítat s proudovým chráničem (Fi) 30mA, 100ms. Výkon topného tělesa kolísá se změnou teplot venkovního prostředí, např. při +10 st. Celsia činí 5,55W + 5 st. Celsia činí 9,25W - 10 st. Celsia činí 12,95W Max výkon 30W Topný pás reaguje na vnější teplotu je-li pod napětím. „Topí“ tedy i v letním období, což dokazuje horní tabulka. Proto je lépe vše řídit venkovním termostatem. Manuální ovládání připojení produ přes vypínač zvyšuje podíl lidské chyby při vypínání systému v letním období. (Zvláště, je-li v objektu umístěno více takových
prvků). Nastavení termostatu je ovlivněno místními klimatickými podmínkami a umístěním objektu. Běžně lze vycházet z minimální teploty pro sepnutí +5stupňů Celsia. Při začlenění vytápění střešních vtoků do větších systémů, např v kombinaci s vytápěním rýn je vhodné použití elektronického zařízení s vlhkostními čidly. Topný pás je zkoušen podel VDE 0721, část 1/3.78 a má reg. Č.VDE 1008. Před uvedením do provozu je nutné provést v souladu s ČSN 331500 „Elektrotechnické předpisy. Revize elektrických zařízení“ výchozí revizi elektrického zařízení. Provozovatel je povinenn v souladu s ČSN 331500“ „Elektrotechnické předpisy. Revize elektrických zařízení“ během provozu provádět pravidelné revize, tj. každé čtyři roky. Návrh zapojení, zpracování návodu k používání (popř. provozních pokynů) a připojení na el. síť smí provést pouze elelktrotechnické firmy.
Teplotní odolnosti materiálů výrobků HL pro dlouhodobé - krátkodobé působení PP - polypropylen............................................................................................ 85-95°C PE - polyetylen.................................................................................................. 80-90°C ABS - akrylonitril - butadien - styren......................................................... 60-70°C
53
Odpady, sifony
®
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Přivzdušňovací ventily na připojovacím potrubí - Miroslav Hartl Přivzdušňovací ventily se na připojovací potrubí vnitřní kanalizace osazují v případech, kdy nejsou dodrženy mezní hodnoty pro použití nevětraných připojovacích potrubí podle ČSN 75 6760 a zřízení větracího potrubí by bylo složité. Výrobková norma ČSN EN 12380 označuje přivzdušňovací ventily písmenem A nebo B. Na rozdíl od přivzdušňovacích ventilů označených písmenem B lze přivzdušňovací ventily označené písmenem A osadit pod úrovní hladiny vody v zařizovacích předmětech napojených na příslušné připojovací potrubí (viz obr. 1 a 3). Přívod vzduchu k přivzdušňovacímu ventilu a přístup pro kontrolu a údržbu lze zajistit pomocí demontovatelné mřížky (obr. 4 a 5). Autor článku nás seznamuje s praktickými příklady napojení přivzdušňovacího ventilu na připojovací potrubí. Recenzent: Jakub Vrána V poslední době se stále více používají přivzdušňovací ventily v systémech vnitřní kanalizace. Ne vždy však jsou správně navrhovány nebo umísťovány. O problematice přivzdušňovacích ventilů bylo napsáno již hodně odborných článků, většina z nich byla zaměřena na přivzdušňovací ventily, které jsou umístěny na splaškovém odpadním potrubí. Tento příspěvek se zaměřuje na přivzdušňovací ventily umístěné na připojovacím potrubí a u zařizovacích předmětů.
Obr. 4 Přivzdušňovací ventil pro připojovací potrubí umístěný ve výklenku ve stěně
těn přístup pro údržbu a kontrolu. Přivzdušňovací ventily se nesmí použít místo větracího potrubí u přečerpávacích zařízení nebo potrubí. Na obrázcích 1 až 3 jsou uvedeny příklady umístění a napojení přivzdušňovacích ventilů na připojovacím potrubí. Na obrázcích 4 a 5 je příklad umístění přivzdušňovacího ventilu ve výklenku s mřížkou.
Obr. 5 Demontovatelná mřížka zakrývající výklenek s přivzdušňovacím ventilem
Navrhování přivzdušňovacích ventilů Přivzdušňovací ventily použité na připojovacím potrubí se dimenzují podle ČSN EN 12056-2, tab. 10. V našich podmínkách se používá Systém 1 – Systém s jediným odpadním potrubím a s částečně plněnými připojovacími potrubími. Nejmenší množství vzduchu Qa (Systém 1) se stanovuje podle vztahu:
Obr. 1 Přivzdušňovací ventil u umyvadla a – na svislé části připojovacího potrubí; b – na ležaté části připojovacího potrubí
Qa = Qtot kde Qa – nejmenší množství vzduchu v l/s Qtot – celkový průtok odpadních vod v l/s Hodnoty maximálních průtoků vzduchu přivzdušňovacím ventilem udávají výrobci podle jejich dimenzí. Požadavky na umístění přivzdušňovacích ventilů Přivzdušňovací ventily se musí umísťovat ve svislém směru a musí se chránit před nebezpečím namrzání. Přivzdušňovací otvory ventilu nesmí být zakryty, aby nebylo zabráněno přístupu vzduchu z okolního prostředí. K přivzdušňovacímu ventilu musí být zajiš-
54
Obr. 2 Přivzdušňovací ventil pro sprchovou vaničku na ležatém připojovacím potrubí
Literatura 1) ČSN EN 12380 Přivzdušňovací ventily pro vnitřní kanalizaci – Požadavky, zkušební metody a hodnocení shody 2) ČSN EN 12056 Vnitřní kanalizace – Gravitační systémy – Část 2: Odvádění splaškových vod – Navrhování a výpočet 3) ČSN 75 6760 Vnitřní kanalizace Autor: Ing. Miroslav Hartl, člen redakční rady Topenářství instalace
Obr. 3 Přivzdušňovací ventil pro WC na ležatém připojovacím potrubí
Recenzent: Ing. Jakub Vrána, Ph.D., Ústav technických zařízení budov, Fakulta stavební, VUT v Brně
Odpady, sifony
®
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Informace o Kanalizačním přivzdušňovacím ventilu HL 900N(ECO) Funkce Přivzdušňovací ventil HL 900N, který odpovídá EN 12380, umožňuje při podtlaku min. 60 Pa přisávání vzduchu do potrubí gravitačních systémů vnitřní kanalizace. Pokud není v potrubí podtlak nebo nastane-li v něm přetlak, zabraňuje těsnící pryžová ventilová deska (kuželka) unikání zapáchajícího vzduchu z kanalizačního potrubí do budovy. Množství vzduchu Množství vzduchu přisávané ventilem do potrubí činí až 36 l/s. Ve smyslu ČSN EN 12056-2 je tímto ventilem možné přivětrat: - připojovací potrubí s průtokem odpadních vod do 30 l/s - splaškové odpadní potrubí s průtokem odpadních vod do 3,7 l/s Použití Přivzdušňovací ventil se používá pro přivětrání: - dlouhých a členitých připojovacích potrubí - připojovacích potrubí se spádovou výškou větší než 1 m (u systému I podle ČSN EN 12056-2) - splaškových odpadních potrubí, která nelze spojit s venkovním ovzduším hlavním či společným větracím potrubím. Podle ČSN 75 6760 však musí být vždy alespoň jedno z nejvzdálenějších splaškových odpadních potrubí od vyústění hlavního svodného potrubí z objektu odvětráno nad střechu. Zákaz použití Přivzdušňovací ventil se nesmí použít: - pro ukončení odpadního potrubí, jehož spodní část se nachází pod hladinou zpětného vzdutí v suterénu; pokud takové odpadní po-
trubí není zabezpečeno proti vniknutí vzduté vody, musí být vždy odvětráno nad střechu - pro ukončení větracího potrubí čerpací stanice odpadních vod - jako náhrada větracího potrubí žump, septiků, čistíren odpadních vod a zařízení pro předčištění odpadních vod (lapače tuku apod.). Zásady instalace Přivzdušňovací ventil musí být instalován: - na přístupném místě pro kontrolu a údržbu (za demontovatelnou mřížkou, demontovatelným podhledem apod.) - na místě kde je dostatečný přívod vzduchu z místnosti nebo z venkovního prostoru (mřížkou 300 x 300 mm, děrovaným podhledem apod.) - s dvojitou stěnou pro dobré tepelně izolační vlastnosti v místech nechráněných před mrazem. Kontrola a údržba - každý uživatel musí být montážní firmou seznámen s nutností kontrol ventilu a s jeho možnými závadami (netěsnost, poruchy v přisávání vzduchu) - kontroly ventilu musejí být prováděny nejméně jednou ročně. Text platí pro Českou republiku, kde platí ČSN EN 12056 a ČSN 75 6760. V jiných zemích je třeba přihlédnout k jejich národním předpisům. Vypracoval Ing. Jakub Vrána, Ústav technických zařízení budov FAST VUT v Brně
Informace o Kanalizačním přivzdušňovacím ventilu HL 904 (HL903) Funkce Přivzdušňovací ventil HL 904 (HL903), který odpovídá ČSN EN 12380, umožňuje při podtlaku min. 60 Pa přisávání vzduchu do potrubí gravitačních systémů vnitřní kanalizace. Pokud není v potrubí podtlak nebo nastane-li v něm přetlak, zabraňuje těsnící pryžová ventilová deska (kuželka) unikání zapáchajícího vzduchu z kanalizačního potrubí do budovy. Množství vzduchu Množství vzduchu přisávané ventilem HL 904 do potrubí činí až 5 l/s (HL 903 ... 8 l/s). Ve smyslu ČSN EN 12056-2 je ventilem HL 904 možné přivětrat připojovací potrubí s průtokem odpadních vod do 4 l/s (HL 903 ... 6,5 l/s) Použití Přivzdušňovací ventil se používá pro přivětrání: - dlouhých a členitých připojovacích potrubí - připojovacích potrubí se spádovou výškou větší než 1 m (u systému I podle ČSN EN 12056-2) Zákaz použití Přivzdušňovací ventil HL 904 se nesmí použít pro přivětrání splaško-
vého odpadního potrubí s průtokem odpadních vod větším než 0,5 l/s (HL 903 ... 0,8 l/s) Zásady instalace Přivzdušňovací ventil musí být instalován: - na přístupném místě pro kontrolu a údržbu (za demontovatelnou mřížkou, demontovatelným podhledem apod.) - na místě kde je dostatečný přívod vzduchu z místnosti nebo z venkovního prostoru (mřížkou 300 x 300 mm, děrovaným podhledem apod.) Kontrola a údržba - každý uživatel musí být montážní firmou seznámen s nutností kontrol ventilu a s jeho možnými závadami (netěsnost, poruchy v přisávání vzduchu) - kontroly ventilu musejí být prováděny nejméně jednou ročně. Text platí pro Českou republiku, kde platí ČSN EN 12056 a ČSN 75 6760. V jiných zemích je třeba přihlédnout k jejich národním předpisům. Vypracoval Ing. Jakub Vrána, Ústav technických zařízení budov FAST VUT v Brně
55
®
Odpady, sifony
HL Hutterer & Lechner GmbH Ceny jsou uvedeny v Kč
Odvodňování plochých střech s využitím výrobků firmy HL Hutterer – Lechner GmbH Pro odbornou veřejnost z řad projektantů a realizačních firem připravila technická kancelář společnosti HL ve spolupráci se svými externími spolupracovníky elektronickou prezentaci týkající se problematiky správného osazení vtoku do střešního pláště. Prezentace je přehledně rozdělena do několika částí podle typu střešních plášťů a dále pak podle způsobu využití střešního pláště. Orientace v prezentaci je zcela intuitivní, každý detail je možné si prohlédnout ve formátu .PDF nebo pomocí aplikace Autodesk Acad, případně si detail vyexportovat ve formátu DXF pro další úpravy. Prezentace jsou nyní rozšířeny o nové výkresy provozních střech za použití vtoků série HL80 (střechy do 25m2) a série HL616 (střechy nad 25m2). Tyto vtoky jsou možné dodávat včetně integrovaných suchých zápachových uzávěrek - klapek, které řeší problematiku zápachu na provozních střechách v případě napojení na jednotnou kanalizaci. U detailů je přiložen také popis použitých výrobků ze sortimentu firmy HL, popis funkce vyhřívaných vtoků, zásady montáže, přičemž u většiny výrobků je vytvořeno také propojení na internetové stránky výrobce pro další technické informace. Tento vyhledávač by měl pomoci všem zájemcům o danou problematiku získat ucelený přehled jednak o způsobech a možnostech správné instalace střešních vtoků do skladby střechy, jednak o výrobním sortimentu společnosti HL v oblasti střešních vtoků. Nové DVD bude distribuováno zájemcům prostřednictvím zastoupení firmy HL v České republice, zároveň je vše k dispozici na internetových stránkách www.hl.blucina.net; www.odtokyhl.cz HL Hutterer – Lechner GmbH Technická kancelář ČR
56
HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/11-18 + HL801V/11-18 + HL801V/17-25 HL801V/17-25 HL801V/17-25 HL801V/17-25 HL801V/17-25 HL801V/17-25 HL801V/17-25 HL801V/17-25 HL801V/17-25
-
HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 -
HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/11-18 + HL801V/11-18 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/22-33 HL801V/22-33 HL801V/22-33 HL801V/22-33 HL801V/22-33 HL801V/22-33 HL801V/22-33 HL801V/22-33 HL801V/22-33 HL801V/22-33 HL801V/22-33 HL801V/22-33 -
HL801R/M40-M25 HL801R/M40-M25 HL801R/M40-M25 HL801R/M40-M25 HL801R/M40-M25 HL801R/M40-M25 HL801R/M40-M25 HL801R/M40-M25 HL801R/M40-M25 HL801R/M40-M32 HL801R/M40-M32 HL801R/M40-M32 HL801R/M40-M32 HL801R/M40-M32 -
M40 HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/11-18 + HL801V/11-18 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/22-33 + HL801V/22-33 + HL801V/28-38 HL801V/28-38 HL801V/28-38 HL801V/28-38 HL801V/28-38 HL801V/28-38 HL801V/28-38 HL801V/28-38 HL801V/28-38 HL801V/28-38 HL801V/28-38 -
HL801R/M50-M25 HL801R/M50-M25 HL801R/M50-M25 HL801R/M50-M25 HL801R/M50-M25 HL801R/M50-M25 HL801R/M50-M25 HL801R/M50-M25 HL801R/M50-M25 HL801R/M50-M32 HL801R/M50-M32 HL801R/M50-M32 HL801R/M50-M32 HL801R/M50-M32 HL801R/M50-M32 HL801R/M50-M32 HL801R/M50-M32 HL801R/M50-M32 HL801R/M50-M40 HL801R/M50-M40 -
M50 HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/8-14 + HL801V/11-18 + HL801V/11-18 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/17-25 + HL801V/22-33 + HL801V/22-33 + HL801V/22-33 + HL801V/22-33 + HL801V/22-33 + HL801V/22-33 + HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/32-44 HL801V/40-52 HL801V/40-52 HL801V/40-52 HL801V/40-52 HL801V/40-52 HL801V/40-52 HL801V/40-52 HL801V/40-52
HL801R/M63-M32+ HL801R/M63-M32+ HL801R/M63-M32+ HL801R/M63-M32+ HL801R/M63-M32+ HL801R/M63-M32+ HL801R/M63-M32+ HL801R/M63-M32+ HL801R/M63-M32+ HL801R/M63-M32 HL801R/M63-M32 HL801R/M63-M32 HL801R/M63-M32 HL801R/M63-M32 HL801R/M63-M32 HL801R/M63-M32 HL801R/M63-M32 HL801R/M63-M32 HL801R/M63-M40 HL801R/M63-M40 HL801R/M63-M40 HL801R/M63-M40 HL801R/M63-M40 HL801R/M63-M40 -
18.02.2009 11:41:46
HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 HL801R/M32-M25 -
M63
Vyhledávací tabulka pro prostupy k vícenásobné potrubní průchodce HL801
57
801_verschraubungen.indd 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
Ø
M32
Odpady, sifony ®
Ceny jsou uvedeny v Kč
HL Hutterer & Lechner GmbH
Těsnící manžeta
HL 800/110, HL 800/125 a 800/160
a vícenásobná potrubní průchodka HL801 s příslušenstvím Pro utěsnění prostupů vedení technického vybavení staveb pro hydroizolaci, izolaci proti zemním plynům a radonu a parotěsné izolace vrchní stavby.
HL800
+
HL801
HL800
Přechod pro prostup potrubí Montážní postup k HL800 1) Manžeta HL800 a průchozí potrubí musí být zbaveny nečistot. 2) Případné vrypy (zejména v ose potrubí) v místě dosedací plochy těsnících břitů musí být oškrábány ostrou škrabkou (např.cidlinou) tak, aby potrubí v místě instalace manžety bylo hladké a na povrchu nebyly viditelné žádné vrypy. 3) Konec potrubí, na který bude manžeta HL800 nasunuta musí být hladký bez otřepů a musí být zkosen pod úhlem 30-45°. 4) Na těsnící břity nebo i do prostoru mezi nimi se nanese mazací tuk dodávaný nebo schválený výrobcem HL v dostatečném množství. Tuk nanášíme nejlépe rukou. 5) Na manžetě se povolí (nejlépe je ji sejmout)) svěrná plastová matice a manžeta se nasune na potrubí tak, aby nedošlo při montáži k poškození těsnících břitů. 6) Po ustavení manžety na místo se dotáhne matice a dále se s manžetou nemanipuluje. Poznámka: Pro snadnější dotažení svěrné matice lze těsně před montáží opatřit mazacím tukem vnitřní závit matice. 7) Těsnící manžeta musí být fixována ke stavební konstrukci tak, aby nemohlo docházet k jejímu posunu ve stavební konstrukci. Průchozí potrubí nesmí vykazovat větší pohyb vůči těsnící manžetě, než vyplývá z běžné tepelné dilatace materiálu nebo dilatace staveb a průchozí potrubí musí být fixováno tak, aby nepřenášelo na manžetu žádné síly kolmé ke své ose.
Bezpečnostní ustanovení Použitý mazací tuk doporučovaný výrobcem nevyžaduje žádná opatření z hlediska ochrany zdraví a lze jej nanášet rukou bez ochranných prostředků. K očištění postačuje otření rukou suchou utěrkou. Lze jej koupit též v lékárnách v ČR pod názvem Vaselinum Album.
Kontaktní místo: HL informační kancelář: tel i fax: 545 223 420, www.hutterer-lechner.com Ing. Jaroslav Maňas, GSM: 602519295, e-mail:
[email protected], Tom Zelený, GSM: 724024657, e-mail:
[email protected]
Prohlášení o shodě Prohlášení o shodě s požadavky na ochranu staveb proti pronikání plynů do vnitřních prostor pod úrovní terénu v souladu s vyhláškou č. 268/2009 Sb., jejíž § 6 odst. 5 zní: Všechny prostupy přípojek nebo příslušného odběrného technického zařízení do stavby nebo její části, umístěné pod úrovní terénu, musí být řešeny tak, aby byl znemožněn v případě havárie plynového potrubí vně objektu průnik plynu do stavby". Vyhláška 137/1998 byla nahrazena vyhl. 268/2009. Výrobce HL Hutterer Lechner GmbH, prohlašuje, že pryžová těsnicí manžeta typ HL800/110, HL800/125, HL800/160 a sdružená těsnicí tvarovka HL801 s příslušenstvím, určená pro utěsnění prostupů potrubí přes hydroizolační pásy spodních staveb, zajišťuje dlouhodobou vodotěsnost 60 kPa (0,6 bar), plynotěsnost a parotěsnost do přetlaku 30 kPa a těsnost proti pronikání radonu. Toto prohlášení se vztahuje na všechny druhy potrubí s hladkým vnějším povrchem v rozměrové řadě (vnější průměr potrubí) 8-52mm a 100, 125 a 160mm v tolerancích daných příslušnými ČSN EN ISO
Výrobní závod HL Hutterer Lechner GmbH, Brauhausgasse 3-5, A 2325 Himberg bei Wien Tel: 0043 2235 86291, Fax: 0043 2235 86291 31, nebo -52; www.hutterer-lechner.com, e-mail:
[email protected]
®
HL NEWS
HL90PrD
HL138
HL530
HL73Pr
HL903
HL600G, 660G
HL62P
HL520 Zápachový uzávěr pro vany sprchových koutů s otvorem pr. 90 mm. S otočným připojením odpadu. Dovolený průtok s ležatým odtokem 54 l/min.
HL Hutterer & Lechner GmbH
2325 Himberg, Brauhausgasse 3-5, Austria Tel.0043/(0)2235/86291-0, FaxDW 31 od. 52 Servicehotline 0043/(0)2235/87748 http://www.hutterer-lechner.com e-mail:
[email protected]