2015. Tanggal: 20 Agustus untuk

KEMENTERIAN RISET, TEKNOLOGI DAN PENDIDIKAN TINGGI UNIVERSITAS JEMBER Jalan Kalimantan No. 37 - Kampus Tegal Boto Kotak Pos 159 Telp. (0331) 330224, 333147, 334267 Fax (0331) 339029, 337422 J E M B E R ( 68121 ) www.unej.ac.id

A D D E N D U M K E D UA D O K U M E N P E N GA DA A N Nomor: 9413/UN25.4.2.1/TU/2015 Tanggal: 20 Agustus 2015

untuk Pengadaan Peralatan Pembelajaran Audio Visual Fakultas Sastra Universitas Jember Tahun Anggaran 2015

Kelompok Kerja Unit Layanan Pengadaan: Pokja Pelelangan Alat Laboratorium/Penunjang Pendidikan, ATK/Bahan Praktikum/Buku dan Jaket Almamater di Lingkungan Universitas Jember

Kementerian Riset, Teknologi, dan Pendidikan Tinggi Universitas Jember Tahun Anggaran: 2015

Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

i


ii

DAFTAR ISI BAB I. UMUM ....................................................................................................................... 6 TETAP BAB II. PENGUMUMAN PELELANGAN DENGAN PASCAKUALIFIKASI ............................... 8TETAP A.

UMUM .......................................................................................................................... TETAP 8 1. 2. 3. 4. 5. 6. 7.

B.

LINGKUP PEKERJAAN .............................................................................................................. TETAP 8 SUMBER DANA ...................................................................................................................... TETAP 8 PESERTA PELELANGAN ............................................................................................................ TETAP 8 LARANGAN KORUPSI, KOLUSI, DAN NEPOTISME (KKN), PERSEKONGKOLAN SERTA PENIPUAN.... TETAP 8 LARANGAN PERTENTANGAN KEPENTINGAN .............................................................................. TETAP 8 PENDAYAGUNAAN PRODUKSI DALAM NEGERI ......................................................................... TETAP 8 SATU PENAWARAN TIAP PESERTA ............................................................................................ TETAP 8 DOKUMEN PENGADAAN ............................................................................................. TETAP 8

8. 9. 10. 11. 12. C.

PENYIAPAN DOKUMEN PENAWARAN ........................................................................ TETAP 8 13. 14. 15. 16. 17. 18. 19. 20.

D.

PENYAMPULAN DAN PENANDAAN SAMPUL PENAWARAN .......................................................... TETAP 8 PEMASUKAN/ PENYAMPAIAN DOKUMEN PENAWARAN ........................................................... TETAP 8 BATAS AKHIR WAKTU PEMASUKAN PENAWARAN .................................................................... TETAP 8 DOKUMEN PENAWARAN TERLAMBAT...................................................................................... TETAP 8

PEMBUKAAN DAN EVALUASI PENAWARAN............................................................... TETAP 8 25. 26. 27. 28. 29. 30.

F.

BIAYA DALAM PENYIAPAN PENAWARAN .................................................................................. TETAP 8 BAHASA PENAWARAN ......................................................................................................................8 DOKUMEN PENAWARAN ........................................................................................................ TETAP 8 HARGA PENAWARAN.............................................................................................................. TETAP 8 MATA UANG PENAWARAN DAN CARA PEMBAYARAN ............................................................... TETAP 8 MASA BERLAKU PENAWARAN DAN JANGKA WAKTU PELAKSANAAN .......................................... TETAP 8 PENGISIAN DATA KUALIFIKASI ................................................................................................ TETAP 8 PAKTA INTEGRITAS ................................................................................................................. TETAP 8

PEMASUKAN DOKUMEN PENAWARAN ...................................................................... TETAP 8 21. 22. 23. 24.

E.

ISI DOKUMEN PENGADAAN .................................................................................................... TETAP 8 BAHASA DOKUMEN PENGADAAN............................................................................................ TETAP 8 PEMBERIAN PENJELASAN ......................................................................................................... TETAP 8 PERUBAHAN DOKUMEN PENGADAAN...................................................................................... TETAP 8 TAMBAHAN WAKTU PEMASUKAN DOKUMEN PENAWARAN...................................................... TETAP 8

PEMBUKAAN PENAWARAN...................................................................................................... TETAP 8 EVALUASI DOKUMEN PENAWARAN ........................................................................................ TETAP 8 [KLARIFIKASI DAN NEGOSIASI TEKNIS DAN HARGA] ................................................................. TETAP 8 EVALUASI KUALIFIKASI ........................................................................................................... TETAP 8 PEMBUKTIAN KUALIFIKASI ...................................................................................................... TETAP 8 BERITA ACARA HASIL PELELANGAN ......................................................................................... TETAP 8

PENETAPAN PEMENANG PELELANGAN ...................................................................................8 31. PENETAPAN PEMENANG....................................................................................................................8 32. PENGUMUMAN PEMENANG ..............................................................................................................8 33. SANGGAHAN ...................................................................................................................................8

G.

PENUNJUKAN PEMENANG ........................................................................................... TETAP 8 34. PENUNJUKAN PENYEDIA/JASA ................................................................................................ TETAP 8 35. BAHP, BERITA ACARA LAINNYA, DAN KERAHASIAAN PROSES ................................................... TETAP 8

H.

PELELANGAN GAGAL DAN TINDAK LANJUT PELELANGAN GAGAL .......................... TETAP 8 36. PELELANGAN GAGAL DAN TINDAK LANJUT PELELANGAN GAGAL .............................................. TETAP 8

I.

JAMINAN PELAKSANAAN ............................................................................................. TETAP 8


iii

37. JAMINAN PELAKSANAAN ......................................................................................................... TETAP 8 J.

PENANDATANGANAN KONTRAK ................................................................................ TETAP 8 38. PENANDATANGANAN KONTRAK .............................................................................................. TETAP 8

BAB IV. LEMBAR DATA PEMILIHAN (LDP) .......................................................................... TETAP 8 A. LINGKUP PEKERJAAN ........................................................................................................ TETAP 8 B. SUMBER DANA .................................................................................................................. TETAP 8 C. JENIS KONTRAK ................................................................................................................. TETAP 8 D. JADWAL TAHAPAN PEMILIHAN ...................................................................................... TETAP 8 E. PENINJAUAN LAPANGAN [APABILA DIPERLUKAN] .............................................................. TETAP 8 F. MATA UANG PENAWARAN DAN CARA PEMBAYARAN ................................................ TETAP 8 G. MASA BERLAKUNYA PENAWARAN ................................................................................. TETAP 8 H. JADWAL ............................................................................................................................. TETAP 8 PEMASUKAN DOKUMEN PENAWARAN................................................................................. TETAP 8 I. BATAS AKHIR ..................................................................................................................... TETAP 8 WAKTU PEMASUKAN PENAWARAN ...................................................................................... TETAP 8 J. PEMBUKAAN PENAWARAN ............................................................................................. TETAP 8 K. DOKUMEN PENAWARAN ................................................................................................ TETAP 8 L. [AMBANG BATAS SISTEM GUGUR] ................................................................................. TETAP 8 M. SISTEM NILAI ..................................................................................................................... TETAP 8 N. UMUR EKONOMIS ............................................................................................................ TETAP 8 O. SANGGAHAN DAN PENGADUAN ................................................................................... TETAP 8 P. JAMINAN PELAKSANAAN ................................................................................................ TETAP 8 Q. JAMINAN UANG MUKA ................................................................................................ TETAP 8 R. SERTIFIKAT GARANSI ........................................................................................................ TETAP 8 S. LAINNYA (APABILA .............................................................................................................. TETAP 8 ADA) ............................................................................................................................................ TETAP 8 BAB V. LEMBAR DATA KUALIFIKASI (LDK) ......................................................................... TETAP 8 BAB VI BENTUK DOKUMEN PENAWARAN ......................................................................... TETAP 8 A. BENTUK SURAT PENAWARAN PESERTA BADAN USAHA/KEMITRAAN (KSO) (UNTUK 1 (SATU) FILE) ....................................................................................................................... TETAP 8 B. BENTUK SURAT PENAWARAN PESERTA PERORANGAN (UNTUK 1 (SATU) FILE) ............................................................................................................................................ TETAP 8 C. BENTUK SURAT PENAWARAN ADMINISTRASI DAN TEKNIS (UNTUK FILE I, METODE 2 (DUA) FILE) ........................................................................................................................ TETAP 8 D. BENTUK SURAT PENAWARAN HARGA (UNTUK FILE II, METODE 2 (DUA) FILE) ....... TETAP 8 E. BENTUK SURAT PENAWARAN ADMINISTRASI DAN TEKNIS PESERTA PERORANGAN (UNTUK FILE I, METODE 2 (DUA) FILE) .......................................................................... TETAP 8 F. BENTUK SURAT PENAWARAN HARGA (UNTUK FILE II, METODE 2 (DUA) FILE)....... TETAP 8 G. BENTUK PERJANJIAN KEMITRAAN/KERJA SAMA OPERASI (KSO) ............................... TETAP 8 H. BENTUK DOKUMEN PENAWARAN TEKNIS .........................................................BERUBAH 8 I. [BENTUK FORMULIR REKAPITULASI PERHITUNGAN TINGKAT KOMPONEN DALAM NEGERI (TKDN), APABILA MEMENUHI SYARAT UNTUK DIBERIKAN PREFERENSI HARGA] ............ TETAP 8 J. BENTUK PAKTA INTEGRITAS .......................................................................................... TETAP 8 K. DATA ISIAN KUALIFIKASI............................................................................................... TETAP 8 BAB VII. PETUNJUK PENGISIAN DATA KUALIFIKASI ......................................................... TETAP 8 BAB VIII. TATA CARA EVALUASI KUALIFIKASI .................................................................... TETAP 8 BAB IX. BENTUK DOKUMEN KONTRAK ............................................................................. TETAP 8 A. BENTUK SURAT PERJANJIAN ............................................................................................ TETAP 8 B. BENTUK SURAT PERINTAH KERJA (SPK) ......................................................................... TETAP 8 BAB X. SYARAT-SYARAT UMUM KONTRAK (SSUK) ........................................................... TETAP 8 A. KETENTUAN UMUM ....................................................................................................... TETAP 8 1.

DEFINISI ................................................................................................................................ TETAP 8 Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

iv

2. PENERAPAN ........................................................................................................................... TETAP 8 3. BAHASA DAN HUKUM ............................................................................................................ TETAP 8 4. LARANGAN KORUPSI, KOLUSI, DAN NEPOTISME (KKN), PERSEKONGKOLAN SERTA PENIPUAN .... TETAP 8 5. ASAL BARANG ....................................................................................................................... TETAP 8 6. KORESPONDENSI.................................................................................................................... TETAP 8 7. WAKIL SAH PARA PIHAK ......................................................................................................... TETAP 8 8. [PEMBUKUAN ........................................................................................................................ TETAP 8 9. PERPAJAKAN .......................................................................................................................... TETAP 8 10. PENGALIHAN DAN/ATAU SUBKONTRAK ................................................................................... TETAP 8 11. PENGABAIAN ......................................................................................................................... TETAP 8 12. PENYEDIA MANDIRI............................................................................................................... TETAP 8 13. KEMITRAAN/......................................................................................................................... TETAP 8 KSO 8 B.

PELAKSANAAN, PENYELESAIAN, PERUBAHAN DAN PEMUTUSAN KONTRAK........... TETAP 8 14. JADWAL PELAKSANAAN PEKERJAAN ......................................................................................... TETAP 8 B.1 PELAKSANAAN PEKERJAAN........................................................................................................ TETAP 8 15. SURAT PESANAN .................................................................................................................... TETAP 8 16. PROGRAM MUTU .................................................................................................................. TETAP 8 17. RAPAT PERSIAPAN PELAKSANAAN KONTRAK ............................................................................. TETAP 8 18. LINGKUP PEKERJAAN............................................................................................................... TETAP 8 19. STANDAR .............................................................................................................................. TETAP 8 20. [PENGAWASAN PELAKSANAAN PEKERJAAN ............................................................................... TETAP 8 21. [PERINTAH ............................................................................................................................ TETAP 8 22. PEMERIKSAAN BERSAMA ......................................................................................................... TETAP 8 23. INSPEKSI PABRIKASI ................................................................................................................ TETAP 8 24. PENGEPAKAN ......................................................................................................................... TETAP 8 25. PENGIRIMAN ......................................................................................................................... TETAP 8 26. ASURANSI.............................................................................................................................. TETAP 8 27. TRANSPORTASI....................................................................................................................... TETAP 8 28. RISIKO .................................................................................................................................. TETAP 8 29. PEMERIKSAAN DAN PENGUJIAN ............................................................................................... TETAP 8 30. UJI COBA .............................................................................................................................. TETAP 8 31. WAKTU PENYELESAIAN PEKERJAAN ......................................................................................... TETAP 8 32. PERPANJANGAN WAKTU......................................................................................................... TETAP 8 33. INCOTERMS ........................................................................................................................... TETAP 8 B.2 PENYELESAIAN KONTRAK ......................................................................................................... TETAP 8 34. SERAH TERIMA BARANG ......................................................................................................... TETAP 8 35. JAMINAN BEBAS CACAT MUTU/ GARANSI ............................................................................... TETAP 8 36. PEDOMAN PENGOPERASIAN DAN PERAWATAN ......................................................................... TETAP 8 37. LAYANAN TAMBAHAN ............................................................................................................ TETAP 8 B.3. ADENDUM ............................................................................................................................ TETAP 8 38. PERUBAHAN KONTRAK ........................................................................................................... TETAP 8 39. PERUBAHAN LINGKUP PEKERJAAN........................................................................................... TETAP 8 40. PERUBAHAN JADWAL PELAKSANAAN PEKERJAAN ...................................................................... TETAP 8 B.4. KEADAAN KAHAR................................................................................................................... TETAP 8 41. PENGERTIAN .......................................................................................................................... TETAP 8 42. BUKAN CIDERA JANJI ............................................................................................................. TETAP 8 43. PERPANJANGAN WAKTU......................................................................................................... TETAP 8 44. PEMBAYARAN ........................................................................................................................ TETAP 8 B.5. PENGHENTIAN DAN PEMUTUSAN KONTRAK .............................................................................. TETAP 8 45. PENGHENTIAN KONTRAK ........................................................................................................ TETAP 8 46. PEMUTUSAN KONTRAK ........................................................................................................... TETAP 8 47. PEMUTUSAN KONTRAK OLEH PPK .......................................................................................... TETAP 8 48. PEMUTUSAN KONTRAK OLEH PENYEDIA .................................................................................. TETAP 8 49. PEMUTUSAN KONTRAK AKIBAT LAINNYA ................................................................................. TETAP 8

C.

HAK DAN KEWAJIBAN KEWAJIBAN PENYEDIA .......................................................... TETAP 8 50. HAK DAN KEWAJIBAN PENYEDIA ............................................................................................ TETAP 8 51. TANGGUNG JAWAB ................................................................................................................ TETAP 8


v

52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. D.

PENGGUNAAN DOKUMEN KONTRAK DAN INFORMASI .............................................................. TETAP 8 HAK ATAS KEKAYAAN INTELEKTUAL........................................................................................ TETAP 8 PENANGGUNGAN DAN RESIKO ............................................................................................... TETAP 8 [PERLINDUNGAN TENAGA KERJA (APABILA DIPERLUKAN) .......................................................... TETAP 8 [PEMELIHARAAN LINGKUNGAN (APABILA DIPERLUKAN) ............................................................ TETAP 8 [ASURANSI (APABILA DIPERLUKAN) ......................................................................................... TETAP 8 TINDAKAN PENYEDIA YANG MENSYARATKAN PERSETUJUAN PPK............................................... TETAP 8 USAHA MIKRO, USAHA KECIL DAN KOPERASI KECIL ................................................................ TETAP 8 [PENYEDIA LAIN (APABILA ADA) ............................................................................................. TETAP 8 [KESELAMATAN (APABILA DIPERLUKAN) .................................................................................. TETAP 8 KERJASAMA ANTARA PENYEDIA DAN SUB PENYEDIA................................................................. TETAP 8 PEMBAYARAN DENDA ............................................................................................................ TETAP 8 [JAMINAN (APABILA DIPERSYARATKAN) ................................................................................... TETAP 8 LAPORAN HASIL PEKERJAAN.................................................................................................... TETAP 8 KEPEMILIKAN DOKUMEN ....................................................................................................... TETAP 8

HAK DAN KEWAJIBAN PEJABAT PEMBUAT KOMITMEN ........................................... TETAP 8 67. HAK DAN KEWAJIBAN PPK .................................................................................................... TETAP 8 68. FASILITAS .............................................................................................................................. TETAP 8 69. PERISTIWA KOMPENSASI ........................................................................................................ TETAP 8

E.

PERSONIL DAN/ATAU PERALATAN PENYEDIA ........................................................... TETAP 8 70. [PERSONIL DAN/ATAU PERALATAN (APABILA ADA)................................................................... TETAP 8

F.

PEMBAYARAN KEPADA PENYEDIA .............................................................................. TETAP 8 71. 72. 73. 74. 75.

G.

HARGA KONTRAK .................................................................................................................. TETAP 8 PEMBAYARAN ........................................................................................................................ TETAP 8 PERHITUNGAN AKHIR (APABILA DIPERLUKAN).......................................................................... TETAP 8 PENANGGUHAN PEMBAYARAN ................................................................................................ TETAP 8 [PENYESUAIAN HARGA (UNTUK KONTRAK HARGA SATUAN SERTA KONTRAK GABUNGAN LUMP SUM DAN HARGA SATUAN) ............................................................................................................ TETAP 8

PENGAWASAN MUTU .................................................................................................. TETAP 8 76. 77. 78. 79. 80.

H.

PENGAWASAN DAN PEMERIKSAAN .......................................................................................... TETAP 8 PENILAIAN PEKERJAAN SEMENTARA OLEH PPK ......................................................................... TETAP 8 CACAT MUTU ....................................................................................................................... TETAP 8 PENGUJIAN ............................................................................................................................ TETAP 8 PERBAIKAN CACAT MUTU ...................................................................................................... TETAP 8

PENYELESAIAN PERSELISIHAN ..................................................................................... TETAP 8 81. PENYELESAIAN PERSELISIHAN .................................................................................................. TETAP 8 82. ITIKAD BAIK .......................................................................................................................... TETAP 8

BAB XII. SPESIFIKASI TEKNIS DAN GAMBAR .................................................................. 8BERUBAH BAB XIII. DAFTAR KUANTITAS DAN HARGA.................................................................. TETAP 144 BAB XIV. BENTUK DOKUMEN LAIN ............................................................................... TETAP 144 A. B. C. D.

BENTUK BENTUK BENTUK BENTUK

SURAT PENUNJUKAN PENYEDIA/ JASA (SPPBJ)........................................ TETAP 144 SURAT PESANAN .......................................................................................... TETAP 144 JAMINAN PELAKSANAAN DARI BANK ....................................................... TETAP 144 JAMINAN PELAKSANAAN DARI ASURANSI/PERUSAHAAN PENJAMINAN .... TETAP

E. F.

BENTUK JAMINAN UANG MUKA DARI BANK .......................................................... TETAP 144 BENTUK JAMINAN UANG MUKA DARI ASURANSI/PERUSAHAAN PENJAMINANTETAP 144


6

Semula: H. BENTUK DOKUMEN PENAWARAN TEKNIS Dokumen Penawaran Teknis [Cantumkan dan jelaskan secara rinci hal-hal berikut. Jika diperlukan, keterangan dapat dicantumkan dalam lembar tersendiri/tambahan] 1. spesifikasi teknis barang (dilengkapi dengan contoh, brosur, dan gambargambar sesuai yang ditetapkan dalam Bab XII Spesifikasi Teknis dan gambar); 2. jangka waktu pelaksanaan/pengiriman barang pekerjaan [tidak melampaui batas waktu sebagaimana tercantum dalam LDP]; 3. Identitas (jenis, tipe dan merek) barang; 4. Surat purnajual dari distributor/agen; 5. surat garansi service, supplies, dan spareparts, garansi dari distributor resmi minimal 1 tahun ; 6. tenaga teknis/terampil yang dibuktikan dengan Ijasah asli dan sertifikat keahlian: a. Memiliki Tenaga Ahli Broadcast • Lulusan S1 Teknik Elektro • Sertifikat Keahlian Broadcast b. Memiliki Tenaga Ahli Kamera • Lulusan S1 Teknik Elektro • Sertifikat Keahlian Kamera Broadcast c. Memiliki Tenaga Ahli Master Control • Lulusan S1 Komputer • Sertifikat Keahlian Master Control/playout otomation; 8. Surat dukungan dari Dieler/Distributor Resmi disertai dengan Surat Penunjukan Dieler/Distributor Resmi dari produsen (LOA); a) Laboratorium Besar No. 1, 3, 4, 5, 6, 8, 9, 10, 11, 15, 29, 30, 37, 38, 39, 40, 41, 42, 43, 44, 83, 90 b) Laboratorium Mini-News No. 1, 2, 5, 6, 10, 18, 19, 20, 21, 22, 23, 29, 35, 59, 62, 63 e) Laboratorium Editing No. 15 f) Laboratorium Film No. 2, 24, 25, 26, 31, 34, 35, 36, 37, 38, 48, 49, 52, 53. 9. Surat dukungan dari Agen/Reseller disertai dengan Surat Penunjukan dari Distributor resmi; a) Laboratorium Fotografi No. 1 sampai dengan 9, 18, 29, 31 b) Laboratorium Film No. 3 sampai dengan 14, 10. Surat dukungan dari Dieler/Distributor Resmi disertai dengan Surat Penunjukan Dieler/Distributor Resmi dari produsen (sertifikat ISO); - Laboratorium Besar No. 83 - Laboratorium mini, No, 63 - Laboratorium Film No. 52


7

Berubah: I. BENTUK DOKUMEN PENAWARAN TEKNIS Dokumen Penawaran Teknis [Cantumkan dan jelaskan secara rinci hal-hal berikut. Jika diperlukan, keterangan dapat dicantumkan dalam lembar tersendiri/tambahan] 1. spesifikasi teknis barang (dilengkapi dengan contoh, brosur, dan gambargambar sesuai yang ditetapkan dalam Bab XII Spesifikasi Teknis dan gambar); 2. jangka waktu pelaksanaan/pengiriman barang pekerjaan [tidak melampaui batas waktu sebagaimana tercantum dalam LDP]; 3. Identitas (jenis, tipe dan merek) barang; 4. Surat purnajual dari distributor/agen; 5. surat garansi service, supplies, dan spareparts, garansi dari distributor resmi minimal 1 tahun ; 6. tenaga teknis/terampil yang dibuktikan dengan Ijasah asli dan sertifikat keahlian: d. Memiliki Tenaga Ahli Broadcast • Lulusan S1 Teknik Elektro • Sertifikat Keahlian Broadcast e. Memiliki Tenaga Ahli Kamera • Lulusan S1 Teknik Elektro • Sertifikat Keahlian Kamera Broadcast f. Memiliki Tenaga Ahli Master Control • Lulusan S1 Komputer • Sertifikat Keahlian Master Control/playout otomation; 7. Surat dukungan dari Dieler/Distributor Resmi disertai dengan Surat Penunjukan Dieler/Distributor Resmi dari produsen (LOA); a) Laboratorium Besar No. 1, 3, 4, 5, 6, 8, 9, 10, 11, 15, 29, 30, 36, 37, 38, 39, 40, 41, 42, 43, 44, 89. b) Laboratorium Mini-News No. 1, 2, 5, 6, 10, 17, 18, 19, 20, 21, 22, 28, 34, 55, 58. c) Laboratorium Editing No. 15, 24. d) Laboratorium Fotografi No. 31. e) Laboratorium Audio No. 27 f) Laboratorium Film No. 2, 24, 25, 26, 31, 34, 35, 36, 37, 38, 48, 49, 52, 53. g) Laboratorium Tata Rias No. 14 8. Surat dukungan dari Agen/Reseller disertai dengan Surat Penunjukan dari Distributor resmi; c) Laboratorium Fotografi No. 1 sampai dengan 9, 18, 29 d) Laboratorium Film No. 3, 4, 5, 7, 8, 9, 10, 11, 12 10. Surat dukungan dari Dieler/Distributor Resmi disertai dengan Surat Penunjukan Dieler/Distributor Resmi dari produsen (sertifikat ISO); - Laboratorium Besar No. 82 - Laboratorium mini, No, 63 - Laboratorium Film No. 52


8

Bab XII. Spesifikasi Teknis

Keterangan Pokja ULP menguraikan spesifikasi teknis yang diperlukan dalam pelaksanaan pekerjaan.


9

SPESIFIKASI TEKNIS A. Laboratorium Besar No Awal

No Perubahan

1

2

1

TETAP

Nama Awal 3 Camcorder

Nama Perubahan

Spesifikasi Awal

4 TETAP

5 Minimum Requirements

Spesifikasi Perubahan

Volume Awal

Volume Perubahan

Satuan

6

7

8

9

TETAP

4

TETAP

Unit

TETAP

1

TETAP

Unit

1/2" Exmor Full HD 3CMOS Sensor MPEG HD422 at 50Mbps Lens with 14x Zoom

2

TETAP

Video Switcher

TETAP

Interchangeable Lens Mount System 3.5" 960 x 540 Color LCD Viewfinder Dual ExpressCard/34 SxS Memory Slots SD/HD-SDI & HDMI Outputs Four Channels of 24-bit 48kHz Audio Semi-Shoulder Mount Design Timecode, Genlock, USB 2.0 Interfaces Minimum Requirements Video Formats

Video Input

1080/59.94i, 1080/50i, 1080/29.97PsF, 1080/25PsF, 1080/24PsF, 1080/23.98PsF, 720/59.94p, 720/50p, 525/60 (NTSC), 625/50 (PAL) HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps 75Ω BNC x 16 Frame synchronizer on each input


10

Number of Inputs

16 (SDI)

Number of ME/s

2ME

Control Panel

HD analog component, SD analog component, Analog composite 20 Button

Number of Outputs

DVI-D: XGA to WUXGA (1080i), XGA to WXGA (720p), VGA to XGA (SD) (HDCP incompatible) RGB: XGA to WUXGA (1080i), XGA to WXGA (720p), VGA to XGA (SD) Standard: 16 (SDI), Max.: 24 (with HSDI x 2 or HSDI-A x 2) HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps 75Ω BNC x 8 (PGM x 2, AUX x 6), HDMI (AUX) x 1 (HDCP, AUDIO incompatible) 9

AUX Outputs

6

Signal Processing

4:2:2 Digital component HD/SD-SDI: 10-bit

Number of Inputs Video Output

Quantization Genlock Input

System Phase Adjust Genlock Output

BB: NTSC 0.429 Vp-p / PAL 0.45 Vp-p or Tri-level Sync: 0.6 Vpp, 75Ω BNC x 1, loopthrough (Terminate with 75Ω terminator, if unused.) Horizontal: -1/2H to +1/2H BB: NTSC 0.429 Vp-p / PAL 0.45 Vp-p or Tri-level Sync: 0.6 Vpp, 75Ω BNC x 1


11

I/O Delay

Temperature / Humidity Power Consumption

3

TETAP

Routing System

TETAP

HD: 1 H, SD: 1.7 H (minimum delay) 1 to 2 frames + minimum delay (when FS or up-resize engine used) 2 to 3 frames + minimum delay (when FS or up-resize engine plus DVE used) 3 to 4 frames + minimum delay (when FS or up-resize engine plus output resize engine and DVE used) 0°C to 40°C / 30% to 90% (no condensation) 100 V AC to 240 V AC ±10%, 50/60 Hz 460 W (at 220-240 VAC) 40 Watt

Minimum Requirements General

Input

Output

TETAP Partitioning : up to 8 partitions with independent level assignment Configuration : web browser via Network bridge Phoenix Control Surface via Network bridge Dimensions : 2RU, depth 6.4cm Power Consumption : 30W Power Supply : +15V DC Connection : 75Ω BNC 75Ω BNC 75Ω BNC 32x32 3G/HD/SD/ Recloking SDI Return Loss : >10dB 1.5GHz to 1.5 GHz Connection 75Ω BNC 75Ω BNC 75Ω BNC


1

TETAP

Unit

12

32x32 3G/HD/SD/ Recloking SDI Clocking : automatic reclock at SMPTE 259M, 292M, 344M, 424M & DVB-ASI Level : 800mV p–p ±10% Return Loss : 10dB 1.5GHz to 1.5 GHz 4.

TETAP

Remote Control Panel

TETAP

Minimum Requirements

TETAP

2

TETAP

Unit

TETAP

2

TETAP

Unit

TETAP

1

TETAP

Unit

40 fully illuminated LED backlit buttons Slim design: 1RU, depth 4.4cm Full function programmable control panel Configurable as cut-bus, multi-cutbus or XY control panel Control up to 8 levels, across 16 breakaways

5

TETAP


TETAP

Removable keycaps for labeling of button functions using transparent inserts Can be mounted on the front of any NK-16 router, providing an integrated 1RU routing and control solution Phantom-powered via TBus Minimum Requirements 40 fully illuminated LED backlit buttons Backlit 16x2 LCD display Slim design: 1RU, depth 4.4cm Full function, programmable control panel Configurable as cut-bus, multi-cutbus or XY control panel Control up to 32 levels, across 16 breakaways

6

TETAP

Network Bridge

TETAP

Removable keycaps for labeling of button functions using transparent inserts Universal power supply included Minimum Requirements


13

Network configuration and monitoring

Compact size: 1RU, depth 2.4cm Password protection to prevent unauthorized changes Front panel status and communications indicators 8 port hub for T-Bus compliant devices 10/100 Ethernet port Supports static or DHCP assigned IP addressing Universal power supply included

7

TETAP

Framesync

TETAP

Minimum Requirements Video Formats

Video Input

Video Input (option)

Video Output

Video Output (option)

TETAP 1080/59.94p, 1080/50p (Level-A) 1080/59.94i, 1080/50i, 1080/24PsF, 1080/23.98PsF, 720/59.94p, 720/50p, 525/60 (NTSC), 625/50 (PAL) 3G-SDI: 3 Gbps, HDSDI: 1.5 Gbps or SDSDI: 270 Mbps, 75Ω × 2 BNC Analog Composite: 1.0 Vp-p, 75Ω BNC × 1 HD Analog Component SD Analog Component 3G-SDI: 3 Gbps or HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps, 75Ω BNC × 4 (2 × 2 outputs) Analog Composite: 1.0 Vp-p, 75Ω BNC × 2 HD Analog Component SD Analog Component


2

TETAP

Unit

14

Video I/O Process

Video Processing Quantization

Frequency Responsed>

DG/DP S/N Ratio K-factor (2T pulse) Comb Filter Genlock Input

System Phase Control

Video Delay

3 inputs (standard) or 5 inputs (maximum input) → 1 processing → 2 × 2 outputs 4:2:2 Digital Component 3G/HD/SD-SDI: 10bit Analog Composite: 12bit 100 kHz to 4.2 MHz: ?0.5 dB to +0.5 dB 4.2 MHz to 5.0 MHz: ?1.0 dB to +1.0 dB roll off above 5.0 MHz (NTSC, composite) 100 kHz to 4.2 MHz: ?0.5 dB to +0.5 dB
4.2 MHz to 5.5 MHz: ?1.0 dB to +1.0 dB
roll off above 5.5 MHz (PAL, composite) 1% / 1° (composite) 60 dB or higher (without quantization noise, composite) 1% (composite) 2D or 3D comb filter (selectable, composite) BB: NTSC 0.429 Vpp/PAL 0.45 V p-p or Tri-level Sync: 0.6 Vpp, 75Ω BNC × 1, loopthrough (Terminate with 75Ω terminator, if unused.) Frame Sync mode, Line Sync mode, AVDL mode, Input Sync mode*2 Maximum 8 frames (Frame Sync or Input Sync)


15

Video Functions

Processing

Proc Amp

Video Clip Color Correction Audio Delay Audio Processing (Set per channel)

8

TETAP

Open Frame

Gear

TETAP

Up/Down/Cross converter, Aspect ratio converter, Proc Amp, Color corrector, Automatic Video Optimizer, Logo Generator Video level: 0.0% to 200.0% Chroma level: 0.0% to 200.0% Black level: ?20.0% to 100.0% HUE: ?179.8° to +180° YPBPR mode, RGB mode, Composite mode Balance mode, Differential mode, Sepia mode 2 ms to 1,000 ms (adjustable in 1 ms steps) Sampling rate converter (SRC), Gain control, Down mix, Channel re-mapping, Channel mute Ethernet: 10BASET/100BASETX/1000BASE-T, RJ45 × 2 Remote (GPI): 9-pin D-sub (male) (7 terminals) × 1 TTL negative logic level signal or Make contact

Minimum Requirements 2RU frame houses up to 20 openGear cards Supports any mix of analog, digital, video and audio modules in the same frame Removable front door for easy fan servicing Frames come with cooling

standard


TETAP

2

TETAP

Unit

16

2 independent looping References with connection to each card slot robust 150 watt power supply with integral cooling optional redundant power supply, hot-swappable for 24/7 operation

9

TETAP

Analog Video Amplifier

TETAP

Power switch is accessible from front of rack frame Front loading power supplies optional Ethernet based frame controller for remote setup, monitoring and control optional SNMP control and monitoring Minimum Requirements

TETAP

2

TETAP

Unit

TETAP

1

TETAP

Unit

Precision equalization of 3 selectable coaxial cable types up to 300m Single-control equalization for quick installation AC or DC input coupling 8 outputs Back porch clamping Supports tri-level sync distribution Clamping speed selectable Differential input for ground loop hum rejection ±3dB of gain adjustment 26ns propagation delay 10

TETAP

Playout Server

TETAP

Power: 1.6 watts Minimum Requirements SYSTEM CONFIGURATION MODES:

Multi Parallel Output – 2 simultenious outputs (SDI or/and Streaming) - Simultaneous Mixed Playback with LIVE In Switch and Interactive Graphics & Ingest


17

Software:

- SD AirBox with PRO and Streaming Options: Router Control: Kramer, Leitch,Pesa, Quartz, etc * Video Scaling (Squeeze) of the playlist content * TitleBox Net Control – Control of TitleBox on the same or on remote PCs * MPEG2 and H.264 Live Input Stream Support * DTMF & SCTE 35 (DTMF part) Decoding for Commercial Insertion - SD TitleBox - ListBox

Video Out: Video In: Audio Out: Audio In: Sync Input: Hardware :

11

TETAP

Distribution Amplifier

TETAP

- SD/HD SDI; Analog Component or Composite - SD/HD SDI - Embedded Audio, 2x Unbalanced AES/EBU; 2x Analog XLR - Embedded Audio - Blackburst in SD/ Tri-Sync in HD - 4RU Rackmount Server - Single PSU; Single Intel® CPU; - Two (2) Gigabit Ethernet ports: System Storage Single HDD Video Storage 1TB Single HDD; OS: Microsoft Windows 7 x64;



TETAP

8

TETAP

Unit

18

1x8 / 1x4 distribution amplifier Equalizes all SDI signals from 143Mb/s to 1.485Gb/s Non-inverting outputs perfect for DVB-ASI distribution Input EQ HD - 200m @1.485Gb, SD -500m @270M Automatic detection of incoming data rate Standard and split rear module I/O options Up to 10 channels of 1x8 or 20 channels of 1x4 in a single frame LED indicators for signal presence and data rate for each channel Excellent input / output return loss specifications 12

13

TETAP

TETAP


Remote Control Panel Cable

TETAP


TETAP

4

TETAP

Unit

TETAP

Remote control unit. It provides an even more affordable solution for basic remote camera operations, with added features including the remote control of media and the operation of clips of non-linear media. It can be directly connected to a camera or camcorder as a portable-type remote control unit or it can be connected to a CCU for use as a simple remote control panel. RCP can control a camera from a distance of up to 100m (328 feet) when connected directly to the camera. Minimum Requirements

TETAP

4

TETAP

Unit

TETAP

4

TETAP

Unit

is a control cable for broadcast cameras and remote cameras. The cable let's users control the camera up to 30 meters (98 feet) away. 14

TETAP

Zoom & Focus Control

TETAP

Minimum Requirements Clamp distance: 0mm (0.39in) ~ 30mm (1.18in) Connector cable: 8pin Cable length: 750mm (29.5in) Operation temperature range: -10oC ~ 40oC (State without dew condenstion) Record / Return exchange switch: REC (Record) or RET (Return)


19

REC/RET Button: Start / Stop (Record or Return) ZOOM: Zoom lever can be variable for zoom speed 15

TETAP

Caracter Generator Hardware

TETAP


TETAP

+ Software:

Video Out: Audio Out: Sync Input: Hardware :

TitleBox - Interactive Character Generator or graphics slaved under AirBox Automation mode; - Unlimited layering like Still text, Crawl; Animations (32-bit TGA sequence, Animated GIF, Flash); Analogue and digital clocks, countdowns, timers; Pictures & Banners; Video Objects Playback, Power Point Presentations; Internet webpage dispay; - Total on-air graphics control with dynamic speed control; - Slide Sequencer; Transitions (In/Out); Advanced graphics scheduling; Dynamic data sources (Text, RTF, RSS, ODBC); - AsRun logging; OEM applications via TitleBox API SD/HD SDI; Analog Component or Composite Embedded Audio, 2x Unbalanced AES/EBU; 2x Analog XLR Blackburst in SD/ TriSync in HD 3RU / 1RU Rackmount Server


1

TETAP

Unit

20

- Redundant (1 + 1) PSU; Hot Swap Hard Drives; - Two (2) Gigabit Ethernet ports; System HDDs with RAID 1; Video Storage: 3TB SATA with RAID5; OS: Microsoft Windows 7 x64; 16

TETAP

Quad Channels Master

TETAP


TETAP

1

TETAP

Unit

TETAP

1

TETAP

Unit

TETAP

2

TETAP

Unit

Dual channel, 50-60 Belpack capability Program Input (Mic/Line) with volume control and CHA/CHB Send switches Mic balanced output for paging Remote All mic-Off (Mic-Kill) and all Buzzers-Off (Buzz-Kill) switches to both channels. Dual call/talk switches

17

TETAP

Desk remote Dual Channel

TETAP

Multichannel operation by Master-Slave output Link connectors Internal Batteray operation enabling short time emergency communications on Power dropouts Relay contacts available NO/NC for multipurpose remote control, enabling Tally, radio station PTT switching 200 Ohm System Line Impedance Minimum Requirements Speaker / Goosenec Dual channel desk / wall station Headset Connection with automatic Mic and loudspeaker disabling Dual call A/B switches with high visibilty light Microphone Limiter for confortable communication

18

TETAP

Microphone

TETAP

Programable function Remote Speaker-On, Remote Mic-On, Buzzeroff start-up Minimum Requirements Mikrofon jenis Gooseneck


21

Pola kutub Dinamik omnidirectional Panjang mikrofon 380 mm Panjang kapsul 70 mm Diameter kapsul 3.0 ø 19

20

TETAP

TETAP

Single Channel Beltpack

Single Headset

Muff

TETAP


TETAP

10

TETAP

Unit

TETAP

Metallic (Aluminium) low weight enclosure. Oval shaped. Plastic clip. Mic on/off push switch logic function (push to talk or latching). Remote Mic-off (Mic kill) operation. Remote Buzz-off (Buzz kill) operation. Bright CALL switch with signalling led. Microphone limiter easing comfortable communications. Internal presets for mic gain, mic phantom, limiter disabled, etc. Minimum Requirements

TETAP

10

TETAP

Unit

Mic: Dynamic, 200 ohm directional. Headphones: 200 ohm. 21

22

TETAP

TETAP

Double Headset

Muff

Wireless Intercom Base

TETAP


TETAP

2

TETAP

Unit

TETAP

Mic: Dynamic, 200 ohm directional. Headphones: 200 ohm (2x400 ohm). Minimum Requirements

TETAP

1

TETAP

Unit

Power requirements RF Number of beltpacks per base Connections

90-264 VAC/50-60 Hz/50 VA. Frequency band 1900 MHz 1 to 4 units. 2x wired Intercom Line, PRG in, PA out, dynamic or electret headset.


22

Remote functions 23

TETAP

Charger Wireless Beltpack

for

TETAP

Minimum Requirements Power requirements Beltpack Battery

Charging Time Indicators 24

TETAP

Wireless Beltpack

TETAP

Mic kill, Buzzer kill. TETAP

2

TETAP

Unit

TETAP

10

TETAP

Unit

TETAP

10

TETAP

Unit

30

20

Unit

110-120/220-240 VAC/ 50-60 Hz/15 VA One to fourwireless beltpack and can be recharged at the same time 2-3 hours. Charging in fast mode Charging / trickle , short / open circuit warning

Minimum Requirements Compatibility: base stations Ergonomic, lightweight design. Internal diversity antennas Battery life: 10 hour in conversation mode Call receive mode: up to 50 hour, stand-by use

25

TETAP

Single Headset

Muff

TETAP

Minimum Requirements Mic: Dynamic, 200 ohm directional.

26

TETAP

Lampu Studio

TETAP

Headphones: 200 ohm. Minimum Requirements Power

100-240V

Power consumption

100V195W

Lamp source

9W Led 16 pieces

Lamp life

30,000 hours

Minimum Requirements Power Power consumption Lamp source Lamp life

Color temperature

3100k

Irradiation angle

12-45 degrees


Dimming Dimmer delay linear Dimming curve

100-240V 100V195W 9W Led 16 pieces 30,000 hours +4 type (DIM4) CV1 ( Fast ) -CV3 ( slow

23

) 3 types Dimming Dimmer delay linear Dimming curve

Strobe Operating

Control mode The input and output connectors

27

TETAP

Lighting Console

TETAP

+4 type (DIM4) CV1 ( Fast ) -CV3 ( slow ) 3 types

Strobe

0-20Hz

Operating

range fixed

Control mode

DMX UNO * 1CH DOS * 2CH STP · D 5CH XLR 3F / 3M 5F / 5M

0-20Hz range fixed

The input and output connectors Power input and output

DMX UNO * 1CH DOS * 2CH STP · D 5CH

Power input and output

XLR 3F / 3M 5F / 5M Neutrik power conditioner IN / OUT

Display

7-segment

Operating environment With Stand Lamp

-20 ~ 45 ° C


With Lamp

Neutrik power conditioner IN / OUT

Stand

TETAP

1

TETAP

Unit

TETAP

3

TETAP

Unit

Signal output : (1) Mixer 16 chanel (2)24 channel analog signal 0-10V Direct control ke 96 channel (4 pages). Kontrol CH 97-512 dgn fungsi PATCH. 96 scene (tiap page key dapat menyimpan 24 scene). 24 programmable chaser patterns. Tiap program chaser mampu sampai 64 step

28

TETAP

Tripod

TETAP

2 set individual cross fader Program data bisa disimpan di external memory card Minimum Requirements Payload

16kg / 35.0lb

Counterbalance

FIX


24

29

TETAP

Jimmy jib

TETAP

Drag mode

2STEP

Tilt angle Temperature range

+85°/ -65° -20°C to +60°C / -4°F to +140°F

Bubble level

Non illuminated

Camera plate

Sliding plate

Sliding range

+/-50mm / 2.0"

Plate attachment

3/8" screw × 2

Spare screw

3/8" screw

Weight Height

10.9kg / 24.0lb 91.5 to 187cm / 36.0 to 73.5"

Ball diameter

100mm

Section Minimum Requirements

2STAGE

Camera Jib Arm Material

TETAP High Grade Aluminum HE30

Height from Ground Camera Jib Arm Thickness

3mm

Camera Jib Crane Length

33ft (10.05 Meter)

Finish

Black Powder Coated A union coupling design of Jib Arm is done by washer and Steel bolt and shank with external clamps as well as Pin Lock for double locking System

Coupling Sections

Jib

Arm

Camera Platform Leveling

Stress cable Shape

33ft(10.04 Meter)

By Control Cable High carbon steel with electro galvanized 4mm tested wire at 900kg Octagonal (Reenforced engineering


1

TETAP

Unit

25

for Triple Strength) Telescopic

30

TETAP

Teleprompter

Spreader Minimum Requirements

TETAP

Viewable Size Brightness Signal Input Input Voltage 31

TETAP

Komputer Desktop

PC All One

In

Input Connector Minimum Requirements

Yes Heavy Duty Aluminum Spreader Included for high stability TETAP

TETAP

Unit

1

TETAP

Unit

1

TETAP

Unit

15 Inch 250 NTS SVGA 100 - 240 VAC 15 Pin D Type Minimum Requirements Processor

Processor Hardisk

Intel Core i5-4460 1TB

Hardisk


Memory

2GB DDR3

Memory

2GB DDR3

Vga

NVIDIA GeForce 705 1GB DVD±RW

Vga

Intel HD

Display

20" WXGA

Networking

Wifi

Optical drive

1

Bluetooth Operating system Optical drive 32

TETAP

Scan Converter

TETAP

Minimum Requirements HDTV Input − Up to 1080p Looping 15−pin HD Input ProcAmp Controls Multi−Standard Output − PAL or NTSC


Windows DVD±RW

TETAP

26

Flicker Reduction Freeze Frame Overscan / Underscan

33

TETAP

Standart Devinison Video

TETAP

Control − Front Panel & IR Minimum Requirements

TETAP

1

TETAP

Unit

TETAP

4

2

Unit

TETAP

4

2

Unit

Bandwidth − 5MHz (−0.2dB) SDI Outputs − Reclocked Multi−Standard − PAL, SECAM & NTSC Proc−Amp Control Control − RS−232 34

TETAP

TV LED

TETAP

Minimum Requirements Ukuran 32" Resolution 1920x1080 True Color Accuracy Time Machine II Triple HD Engine Picture Wizard III Port

USB HDMI With Stand Bracket

35

TETAP

TV LED

TETAP

Minimum Requirements Ukuran

42"

Resolution

4K, 1920 x 1080 (Full HD) IPS Panel Triple XD Engine, 4K X-Reality™ PRO


27

Clear Voice II HDMI USB With Stand Bracket 36

TETAP

Portable Recorder

File

TETAP

Minimum Requirements Video

TETAP Inputs: 1x HD/SD-SDI

Loop Through

Supported Input Resolutions: 1080p(23.976, 24) 1080i(50, 59.94, 60), 720p(50, 59.94, 60), 576i, 480i Outputs: 1x HD/SDSDI, 1x HDMI Inputs: 2x Balanced XLR (Analog Stereo Pair 2-Channels) Outputs: 2x Balanced XLR (Stereo Pair 2Channels) Embedding: Stereo Audio embedded to HD/SD-SDI (8Channels) and HDMI (4-Channels) outputs and to saved file Recording Format: PCM 24-bits / 8Channels / 48KHz Sampling Rate 1x HD/SD-SDI

Interface

USB & SATA

Saved File

MXF OP1A

Color Sampling

MOV (currently unsupported in Adobe Premier CC) HD (35-125Mbps): 4:2:2 HD (10-25Mbps): 4:2:0

Audio


2

1

Unit

28

SD (15-50Mbps): 4:2:2 SD (8Mbps): 4:2:0 Hard Drive

320GB HDD Included Compatible with SSD Drives

37

TETAP

Mini Converter

TETAP


TETAP

4

TETAP

Unit

TETAP

6

TETAP

Unit

TETAP

6

4

Unit

Embeds Audio into SDI Signal Single Link 6G-SDI Input Supports SD, HD, UHD 4K & DCI 4K Signals Automatic Input Signal Detection Redundant SDI Input 4x 1/4" Audio Jacks 4 Analog or 8 AES/EBU Audio Channels 24-Bit, 48 kHz Audio

38

TETAP

Mini Converter

TETAP

Control via DIP Switches or Software Minimum Requirements Single Link SD/HD/3G/6G-SDI Input 4K HDMI Output Supports SD, HD, UHD 4K & DCI 4K Signals Automatic Input Signal Detection Redundant SDI Input & Looped SDI Output 24-bit, 48 kHz Audio

39

TETAP

Mini Converter

TETAP

Analog & AES-EBU Digital Audio Outputs Control via DIP Switches or Software Minimum Requirements


29

Single Link SD/HD/3G/6G-SDI Input Component, Composite, & S-Video Output SD, HD, UHD 4K & DCI 4K Input Signals Automatic Input Signal Detection Redundant SDI Input & Looped SDI Output Analog & AES-EBU Digital Audio Outputs 24-bit, 48 kHz Audio 40

41

TETAP

TETAP

Mini Converter

Video Monitor

TETAP


TETAP

4

TETAP

Unit

TETAP

Device to convert analog video sources to SDI video output Embed SDI audio from balanced AES/EBU or analog audio inputs Minimum Requirements

TETAP

1

TETAP

Unit

TETAP

1

TETAP

Unit

Supports SD/HD/3G/6G-SDI Auto Format Sensing & Selection 1 x Loop Through SDI I/O per Monitor Select Video, Waveform, Vectorscope RGB Parade, YUV Parade, Histogram Audio Phase & Levels

42

TETAP

Audio Monitor

TETAP

Software Control via Ethernet Auto Orientation Sensing & Image Flip Minimum Requirements Digital Audio Input Analog Input

2 x Channel AES/EBU L/R Balanced & Unbalanced 2 x 27-Segment LED VU Meters Front Panel Illuminated Keypad


30

Front Panel 1/4" Headphone Jack Supports SD/HD/Ultra HD @ 10-bit via SDI 16 x Channels Audio Output via SDI Out 2 x Channels Embedded Audio via HDMI Out Available Dolby Decoder Upgrade Card 1RU-Sized Unit with Class A/B Amplifier 43

TETAP

SDI Monitoring

TETAP


TETAP

1

TETAP

Unit

TETAP

1

TETAP

Unit

-

1

0

Unit

17" Supports SD/HD/3 Gb/s SDI Formats 1920 x 1080 Resolution and Glossy Screen 3 Gb/s SDI Video Inputs Integrated Tally for Live Broadcast Fully Digital Adjustments

44

TETAP

SDI Monitoring

TETAP

Built-in Ethernet Centralized Network Based Control For Multi-monitor Installations Minimum Requirements 3G/HD/SD-SDI Inputs, Both with Loop-Out Integrated Tally for Live Broadcast Ethernet Input for Adjustments 2K, 1080i/p, 720p & 50/60 Hz SD Support 10-Bit Color & 4:2:2 / 4:4:4 Sampling

45

DIHILANGKAN

Monitor broadcast

TETAP

800 x 480 Resolution Minimum Requirements 1366 x 768


31

1080/60p 10-bit 4:4:4 Processing

Video

900:1 Contrast Ratio 350cd/m²

46

45

47

46

Earpiece Audio 24 Ch

TETAP Mixer

TETAP

16:9 / 4:3 Aspect Ratio Wide 178° Viewing Angles 12-channel Audio Level Meter HD/SD-SDI, DVI-D, Composite Safety Markers & Tally Lamps Complete Earset with ⅛” Straight Connector & eartube Minimum Requirements 24 Mic / Line Inputs (TRS + XLR) 25 Motor Faders 3 Stereo Inputs (TRS) 4 Stereo FX Returns 20 Mix Outputs (XLR) 2 Stereo Groups 2 Stereo Matrix Outs 4 Mute Groups 4 DCA Groups 4 FX Engines 4 FX Sends / Returns 10 Soft Keys USB Audio Streaming DAW MIDI Control AES Digital Out


TETAP TETAP

4 2

TETAP TETAP

Unit Unit

32

Recallable AnaLOGIQTM Preamps Qu-Drive direct Multitrack Recording / Playback on USB drives 800×480 Touchscreen iLive FX Library dSNAKETM Remote Audio Port Compatible with ME Personal Mixing System Qu-Pad iPad App Trim, polarity, HPF, gate, insert, 4-band PEQ, compressor and delay on all Inputs Insert, 4-band PEQ, 1/3 octave GEQ, compressor and delay on all Mix outputs Built-in Signal Generator

48

47

Power Conditioner

TETAP

RTA with Peak Band indication Minimum Requirements Maximum Current: Line Cord:

Output

Pull-out Lights: BNC Socket w/Switch: Operating Voltage: Spike Protection Mode:

TETAP 16 amps 3/1.0MM AWG, 2.5M cord w/IEC female to 16A Schuko plug Two multi-LED, dimmable lamps Rear rack lamp, 12VAC 500MA maxx (lamp not included) 180 to 274 VAC

Response Time:

Line to neutral, zero ground leakage 375 VAC peak @ 3,000 Amps 1 nanosecond

Maximum Surge Current:

6,500 Amps

Noise Attenuation: Power Consumption:

10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz 12 watts

Safety Listing:

CE

Spike Clamping Voltage:


1

TETAP

Unit

33

49

48

Bi-Amplified Active Monitor (Single) for Audio Control room

TETAP


4 TETAP

Inputs

1x XLR balanced

Frequency Response

Crossover Frequency

58 Hz to 20 kHz (± 2 dB) 55 Hz to 21 kHz (-3 dB) 3.0 kHz

LF Amplifier

40W

HF Amplifier

40W

Maximum SPL

100 dB

Low Frequency Driver

5" (130 mm)

High Frequency Driver

0.75" (19 mm) metal dome Volume Dial

Controls

Power Switch Tone Controls:

Mounting Options

Enclosure Material

Treble Tilt (Off, -2 dB @ 5 kHz) Bass Tilt (-2 dB, -4 dB, -6 dB) Bass Roll-Off (Off, -6 dB @ 85 Hz), used with the separately available 7050B subwoofer Tabletop (with included Iso-Pod) 3/8" thread on base Two 0.24 x 0.39" (6 x 10 mm) threaded holes for Omnimount size 20.5 brackets Three mounting points for vertical or horizontal positioning Die-cast aluminum


TETAP

Unit

34

Power Supply (AC)

120V

Voltage Range

±10%

Power Consumption

Idle: 10W Standby: <0.5W Full Output: 80W

50

49

Floor Monitor Speaker @pair with Stand

TETAP


3 TETAP

Frequency Response

Maximum SPL

47 Hz - 20 kHz (-3 dB) 42 Hz - 23 kHz (-10 dB) 128 dB SPL

Dispersion

90˚ x 45˚, (H x V)

Compression Driver

1.4' (36 mm)

Crossover Frequency

3 kHz

Diaphragm

Titanium (tweeter)

Magnet

Ferrite

Woofer Diameter

12.0" (305 mm)

Cone Material

Paper (woofer)

Rated Power

500 W RMS, 1000 W peak (overall) 400 W RMS, 800 W peak (LF) 100 W RMS, 200 W peak (HF) Class D (LF)

Amplification

Class AB (HF) THD

< 1%

Cooling

Convection

Input

Channel 1: Mic/Line, female XLR / 1/4" TRS combo Channel 2: Mic/Line, female XLR / 1/4" TRS


TETAP

Unit

35

combo, stereo RCA Input Impedance

Thru

Power

Input Protection

LED

Construction

Channel 1: 8 kohms balanced , 10 Mohm unbalanced Channel 2: 8 kohms balanced , 25 kohms unbalanced Male XLR balanced Passive when the Ch 1 / Mix switch is in the "out" (Ch 1) position Active when the Ch 1 / Mix switch is in the "in" (Mix) position US Detachable Line Cord: 100 – 120 VAC, 50 – 60 Hz, 160W EU Detachable Line Cord: 220 – 240 VAC, 50 – 60 Hz, 160W AC Connector: 3-pin IEC 250 VAC, 10 A male Power Supply Type: Switchmode Operating Temperature: 0 - 40º C Extended Ambient Temperature: 32 104º F Peak and RMS limiting, power supply and amplifier thermal protection Defeatable front power, input signal/OL, speaker mode, feedback destroyer on/off and active filters, system limiter Cabinet: polypropylene Finish: black, textured finish


36

Grille: perforated metal with weatherresistant coating Fly points: three M 0.4 x .05 x .78" (10 x 1.5 x 20 mm) Monitor angle: 40º 51

50

Dynamic Cardioid Mic

TETAP

Minimum Requirements Transducer Polar Pattern

(Moving Dynamic Cardioid

Frequency Response

50Hz - 15kHz

Maximum Input Sound Level Power Requirements

Not Specified by Manufacturer None Dynamic, Requires No Phantom or Battery Power 150 Ohms (300 Ohms Actual) for Connection to Low Impedance Microphone Inputs. XLR-3M Type

Output Impedance

Output Connectors 52

51

Wireless bodypack microphone system

TETAP

TETAP

8 TETAP

System

RF Carrier Range Overall Response

Frequency

True Diversity UHF Wireless Lavalier System B / 626 - 668 MHz

Frequency

Line: 25Hz - 18kHz Mic: 80Hz - 18kHz

Signal-to-Noise Ratio

> / - 115dBA

Receiver Type of Receiver Type of Outputs

TETAP

Unit

Coil)


Type of System

4

Half-Rack Mountable True Diversity UHF Balanced XLR


Unit TETAP

37

Power Requirements

Unbalanced Phone 1/4" Phone Panel) 12VDC

Battery Type/Approx. Life

Not Applicable

Display

Back-lit LCD Display

Mounting Options

Rackmount (Included) BNC Type x5

Headphone Monitoring

Antenna Type

1/4" (Front

Kit

Transmitter Type of Transmitter

Bodypack Transmitter

Type of Input Connector

Locking 1/8" (3.5mm) Mini Gold Lavalier Microphone Omnidirectional

Type of Microphone Polar Pattern Interchangeable Heads

Mic

Level Control

No (Locking 1/8" mini input on bodypack accommodates compatible microphones) AA 1.5V Batteries x2 (8 Hours Typ.) Programmable Mute Function Yes

Antenna Type

1/4 Wave

Display

Back-Lit LCD

Battery Type/Approx. Life Mute Switch

53

52

Wireless On

Clip

TETAP

Minimum Requirements Camera-Mountable Receiver Bodypack Transmitter Clip-On Lavalier Mic 1680 Tunable Frequencies Across 42 MHz Auto Frequency Finds Open Bands

Scan


TETAP

4

TETAP

Unit

38

3 Level Squelch To Block Interference 20 Banks With 12 Channel Presets Each Compander For Clearer Sound Auto-Lock Prevents Accidental Adjustment 54

53

Wireless Hand microphone

TETAP


10

TETAP

Unit

TETAP

8

TETAP

Unit

TETAP

4

TETAP

Unit

TETAP

Camera Mountable Receiver Handheld Transmitter 1680 Tunable Frequencies Across 42 MHz Auto Frequency Scan Finds Open Bands 3 Level Squelch To Block Interference 20 Banks With 12 Channel Presets Each Compander For Clearer Sound Auto-Lock Prevents Accidental Adjustment 55

54

Rack mount

TETAP

19" Rack mount kit

56

55

Antenna Splitter

TETAP

Minimum Requirements Connector

Frequency Range Operating Voltage Current Consumption Supply Voltage

Input: BNC x 8 Output: BNC x 2 (RF Out) 500 to 870 MHz (-3 dB) 13.8 VDC (with NT 11 mains unit) max 2.0 A with 4 receivers and 2 antenna boosters Supply Voltage of Antenna Booster at ANT RF In A and ANT RF In B: 12 V 130 mA Supply Voltage of Receivers at A1 - A4: 12 V (protected from reverse feed), 350 mA


39

Relative Humidity

5 to 95%

Operating Temperature

14 to 131°F (-10 to +55°C) -4 to 158°F (-20 to +70°C) 120VAC

Storage Temperature Power Requirements 57

58

59

56

57

58

Omnidirectional UHF Antenna

Antenna Booster

Headphone

TETAP

TETAP

TETAP

Minimum Requirements Frequency Range

430 - 960MHz

Angle of Coverage

360°

Gain Mount

0dB 5/8" Thread, Thread Adapter

Connector

BNC Socket, 50 ohms

Max Input Signal

10W

Temperature Minimum Requirements

-20° - +80° C

Amplification

10dB

Bandwidth

42MHz (switching)

Frequency Bands

B: 626-668MHz

Connector Minimum Requirements

BNC

Type Frequency Range

Circumaural, back 8Hz - 25kHz

Impedance

64 Ohms

Sensitivity

102dB SPL/mW

Maximum Input Power

500mW

Connectors

3.5mm stereo mini plug with screw-type 1/4" adapter 10' (3 m) (coiled)

Cable Length

4

TETAP

Unit

TETAP

2

TETAP

Unit

TETAP

5

TETAP

Unit

TETAP

3/8"

closed-


40

60

59

Direct Active

Box

TETAP

Minimum Requirements Input Impedance Max Input

Input Connectors

Output Max Output Output Connectors THD Noise Frequency Response Main/Standby battery Power Consumption Phantom Power 61

60

Computer Direct Box

TETAP

TETAP

2

TETAP

Unit

< 0.005% at 1khz, 0dbu output < -105db unweighted, 22hz-22khz, rms* 30Hz to 20kHz, +0dB/-1dB 9 volt PP3 type, preferably alkaline on phantom: less than 7.5mA, on battery: less than 2mA. +20 volts DC to +48 volts DC TETAP 2 x RCA phono

1 x 1/8" TRS mini stereo phone 2 x XLR 2 x RCA phono Thru

Input Level

Unit

+8dBu into 600 Ohms or greater XLR3-32 or equivalent

1 x 1/4" TRS phone

Output Connectors

TETAP

1 mOhm (pad at 0dB), 47 kOhm (pad at 20dB or -40dB) +9dBu (pad at 0dB), +29dBu (pad at 20dB), +49dBu (pad at -40dB) Two Parallel 1/4" jack connectors (Tip Hot +ve, Sleeve ground), and a parallel XLR connector (unbalanced) (Pin 2 Hot +ve, Pin 1 & 3 ground) Transformer Balanced

Minimum Requirements Input Connections

4

Not specified manufacturer

by


41

Output Level Controls

Not specified manufacturer -10dB pad switch

by

Ground lift switch Frequency Response Power 62

61

Digital Effect Processor

TETAP

40Hz to 20kHz, +/3dB 48V


TETAP

Effects Type

Multi

Channels

2

Presets

122

User Memory

99

Inputs

2 x XLR (analog) 2 x 1/4" TRS phone balanced (Analog) 1 x XLR AES/EBU (digital) 1 x BNC WordClock

Output

2 x XLR (analog) 2 x 1/4" TRS phone balanced (Analog) 1 x XLR AES/EBU (digital) 1 x USB to Host

AD/DA Conversion

24-bit, 128x oversampling (@fs=44.1, 48kHz) 24-bit, 64x oversampling (@fs=88.2, 96kHz) Internal Clock: 44.1, 48, 88.2, 96kHz External Clock: Normal Rate :39.69kHz to 50.88kHz Double rate: 79.38kHz to 101.76kHz


4

TETAP

Unit

42

MIDI

In, Out/Thru

External Storage

USB to Host MIDI SysEx

Display

Frequency Response

Dynamic Range Specialties 63

62

Equalizer Sound

TETAP

16 characters x 2 lines with 5-color back-lit LCD 12 segment (L,R) meter LED 20Hz to 20kHz (0dB + 1.0, -3.0) @48kHz 20Hz to 40kHz (0dB + 1.0, -3.0) @96kHz 106dB AD + DA, input level VR: Max 96kHz audio DSP

Minimum Requirements Filter Type

TETAP

Number of Channels

Graphic, proportional-Q filtering 2

Inputs

2 x XLR

with

6-pin Phoenix Outputs

2 x XLR 6-pin Phoenix

Maximum Input Level

+22dBu

Frequency Bands

2 x 30

Bandwidth

1/3 octave

Range (Boost/Cut)

+/-6dB or +/-12dB, selectable +22dBu into 2kΩ

Maximum Output Level Frequency Response Dynamic Range

20Hz to 20kHz, +/0.5dB >112dB (20Hz to 20kHz unweighted), +/-12dB range


4

TETAP

Unit

43

Specialties

64

63

Noise Gate Management

TETAP

Minimum Requirements Noise gate

Number of Channels

4

Inputs

4 x XLR (2-pin hot)

Outputs

4 x 1/4" TRS phone Key Input 4 x XLR (2-pin hot)

Dynamic Range

>+22dBu balanced or unbalanced Release: 0.01 to 3 seconds >+22dBm balanced, >+20dBm unbalanced 0.35Hz to 200kHz, +0/-3dB >115 dB, unweighted

Gate Threshold

Off to -10dB

Noise

<-96dBu, unweighted, 22kHz measurement bandwidth

Gate Rate Maximum Output Level Frequency Response

64

Microphone Case

TETAP

Minimum Requirements Material

Type of Closure

66

65

Tripod Microphone Long Stand

TETAP

TETAP

Function

Maximum Input Level

65

The unit automatically adjusts for operation on all voltages from 100 to 240V AC

Carrying/Transport Options Minimum Requirements

TETAP

2

TETAP

Unit

4

TETAP

Unit

10

TETAP

Unit

Exterior: Injection molded polypropylene copolymer resin Interior: Custom-cut foam padded Trigger release latch system Cushion grip handle TETAP

Construction

Steel

Base Type

Tripod


44

Base Spread Boom Length 67

66

Tripod Steel Speaker Stand

TETAP

Height Range Minimum Requirements Height Range Maximum Load Capacity Mount Size Construction

68

67

UPS 10 KVA

TETAP

Output Power Capacity Output Power Voltage Input Power Voltage

Dataline Protection From Factor 68

AC SPLIT

TETAP

cm)

31.5" (80 cm) 36.2 to 63" (92 to 160 cm) 10

TETAP

Unit

TETAP

1

TETAP

Unit

TETAP

4

TETAP

Unit

1

TETAP

Unit

TETAP 46 - 76" (118 - 194 cm) 100 lb (45.36 kg) 1-3/8", 1-1/2" with adapter Steel

Minimum Requirements Interface

69

25.6" (65 diameter

USB / Intellislot (Dry Contact / SNMP Card / Modbus Card / RS485 Card) 10000VA / 9000W Single-phase, 220/230/240 VAC 230 / 400 VAC single-phase, 3-wire or 3-phase, 4-wire system Modem and phone line Surge Protection Tower and rack convertible, optional rail kit available

Minimum Requirements AC Split 2 PK Low watt Auto cleaning

70

69

Standard Equipment Rack

TETAP

Filter udara anti baketri Minimum Requirements M series, 45U depth 1100mm, Include PDU, 19"


TETAP

45

71

72

70

71

Meja Console Video & Audio

Kursi Komputer

TETAP


TETAP

Dimensi : custom Material : full metal (plat besi), kaki stabil Finishing : powder coating dark grey Minimum Requirements Bahan Kaki Warna

73

72

Meja Cafe Set

TETAP

Daun meja Rangka bagian bawah

74

75

73

74

Kursi Cafe

Meja Cafe

TETAP

TETAP

TETAP

Unit

TETAP

10

TETAP

Unit

TETAP

4

TETAP

Unit

TETAP

8

TETAP

Unit

TETAP

10

TETAP

Unit

Fabric Powder coating Merah

Minimum Requirements Kursi

2

TETAP

Rangka kaki/ Rel silang: Baja, Dilapis serbuk epoksi/poliester Sisipan: Timah Tempat duduk/ Sandaran: Plastik polipropilena Particleboard, Melamine foil, Plastik ABS Kaki/ Rel samping: Baja, Dilapis serbuk epoksi/poliester Bagian dalam kaki: Baja, Dilapis serbuk berpigmen

Minimum Requirements Lebar

38 cm

Tinggi

7 cm

Panjang

63 cm

Berat

4.38 kg

Warna

Hitam

Dudukan

Bulat

Kaki Penyangga

5



46

Daun meja:

76

75

Sofa

TETAP

77

76

Sofa

TETAP

78

77

Screen Projector

TETAP

79

78

Projector

TETAP

Fibreboard, Melamine foil, Melamine foil, Lacquer akrilik bening Dasar Aluminium, Lapisan serbuk poliester/ epoksi berpigmen, berbentuk bintang Kaki/ Rel Baja, Lapisan serbuk poliester/ epoksi berpigmen Minimum Requirements Warna : putih ~ Ukuran :2 seats ~ Keterangan : Rangka : kayu jati dan Pinus Busa super – per baja spiral – cover kuwalitas pilihan. Dan kaki dari bahan stainless. Minimum Requirements Sofa U, kerangka kayu jati , busa super, per baja spiral, cover Minimum Requirements Viewing area (WxH)mm

4064x3048

Case Leght (mm)

4216

Total height (mm)

3200

Top Bottom Border (mm)

80

Left Right Border (mm)

80

Frame Height Max (mm)

1150

Frame Height Min (mm)

75

Ratio Minimum Requirements

4:03

Sistem Projector 3 LCD Technology Resolusi Native WUXGA (1920 x 1200) Maks. Resolusi WUXGA (1920 x 1200) Brightness 5000 lumens (4000 Eco Mode) Rasio Kontras 3000:1 Rasio Aspek 16:10 Rasio Besaran (Zoom) 2.0:1


TETAP

2

TETAP

Unit

2

TETAP

Set

TETAP

2

TETAP

Unit

TETAP

1

TETAP

Unit

TETAP

47

Ukuran Gambar Maximum Image Size (width, cm) : 1290 Minimum Image Size (width, cm) : 60 Input VGA, 5BNC, Composite, S-Video, Component, 3.5 mm stereo input x 2, RCA stereo input Monitor Output : VGA Stereo RCA Output : 1 Speaker 16W (2 x 8W) Kesesuaian Video Standard (NTSC, NTSC 4.43, PAL/M/N, SECAM), SD (480i, 480p, 576i), HD (720p, 1080i, 1080p) 80

79

Scaffolding

TETAP

81

80

Catwalk Scaffolding

TETAP

82

81

TETAP

83

82

Roda scaffolding Genset 80 KVA

TETAP

Konsumsi Daya 480W at 120V, 455W at 240V Minimum Requirements : Pipa Scaffolding dibuat sedemikian rupa untuk menjadi main frame, cross brace, horizaontal, ladder, cat walk dan perlengkapan scaffolding lainnya yang menggunakan pipa. Ketebalan pipa scaffolding itu sendiri bervariasi, dan untuk mainframe scaffolding Indonesia menggunakan pipa 1 1/4 inch dengan ketebalan 1.8mm full. 1(satu) set scaffolding itu sendiri terdiri dari 2(dua) main frame ukuran 1.9 meter + 2(dua) cross brace + 4(empat) Joinpin Minimum Requirements : Catwalk 0.50, pijakan dan penyeimbang pada scaffolding Minimum Requirements : Svivel Castor 6", 1 set berisi 4 roda, roda untuk scaffolding Minimum Requirements DAYA GENERATOR / TYPE CYLINDER FUEL CONSUMPTION FUEL TANK CAPACITY

TETAP

TETAP TETAP TETAP

20

TETAP

Set

15

TETAP

Pcs

6

TETAP

Set

1

TETAP

Unit

2

TETAP

Set

80 KVA STAMFORD UCI 224 G 4 14 L (75% LOAD), 18.7 L (100% LOAD) 140L

OIL CAPACITY 84

83

Eletrician Tools Kit

TETAP

8L 7 Pcs Long Precision Screwdriver : 2.4x7.5, 3.0x100, 3.8x150, 2.4x75


TETAP

48

#0x75 #0x100 #1x150 10pcs Miniature Combination Wrench (4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11) 9"5 Way Crimping Tool 12pcs Screwdriver : ( Slotted: 6 X 150 , 6 X 100 , 5 X 100 , 6 X 38mm) & (Phillips : 6 X 150 , 6 X 100 , 5 X 100 , 6 X 38mm) 1/4", 3/16" Nut Driver Torx T10, T15 8" Lineman's Plier 6"tweezer Brush 3.6v Cordless Screwdriver Kit Plastic Fliptop Box Digital Multimeter (Optional) 3pcs Soldering Aid Kit Solder Core 6" Stainless Scissors 7pcs Folding Type Hex Wrench (1.3, 1.5, 2, 2.5, 3, 4, 5) Computer Continuity Tester 2pcs Removable Pallets Electric Tape Mini Flash Light Anti-static Strap Soldering Iron Stand Hobby Vise Cleaning Solution (60ml) Head Cleaning Fluid (18ml) Mini Vaccuum Cleaner


49

Utillity Knife Ic Extractor 5"flat Nose Plier 5"bent Nose Plier 5"long Nose Plier 4.5"side Cutting Plier Desoldering Pump 6"adjustable Wrench 30w Soldering Iron With Longlife Tip. 5pcs File Set

85

84

86

85

Lemari Cam Material Instalasi

Store

TETAP TETAP

Tool-carring Case: 18" X 16" X 13" Minimum Requirements : 154 L Capacity with 2 Shelver, 2 Drawers, 2 Door. Kabel (Listrik Serabut (NYY HY), warna hitam, jenis ukuran 2x2.5, jenis ukuran 3x2.5; speaker; microphone; RG-45; genset 3 phase panjang 20-50 m; panel listrik genset; snake cable 32 input-8 output-50 meter ) Konektor (listrik, jack speaker male female; jack XLR male female; jack TRS 1.4 inch, 3.5 mm, 2.5 mm male female; RCA male female; legrand plug dan socket) Instal software

1

TETAP

Unit

TETAP

1

TETAP

Lot

Minimum Requirements 5-inch FFS LCD Panel with LED backlight

3

6

Unit

TETAP

Karpet master control room Peredam suara ringan Panel listrik master control room dan studio Kabel Try

87

86

Viewfinder Monitor

TETAP

Penutup dan pengaman genset Minimum Requirements 1024x600 Resolution


50

3G-SDI, HDMI, & Analog Video Inputs Full HD 1080p up to 60fps 2K Input Support Internal SDI and HDMI Conversions SDI, HDMI & Composite Outputs 12-Bit to 8-Bit Internal Processing Vector Scope / Color / Peaking

False

16-Channel Audio Level Meter 88

87

LED PAR

TETAP

89

88

Moving Head

TETAP

RJ-45 Remote Control Led Par light 54 x 3W Voltage : AC100V-240V 50/60Hz Power : 70W/180W Minimum Requirements Votage: 200V~240V/50~60Hz LCD PANEL DISPLAY Color temperature: 8500K Color:14color+open Gobo:17fixed gobo +open Prism: Rotating eight face prism, can two-way rotation, beams of light effect can be opened and closed Three-phase motor Optical Device: 3-lens yilong optical group Zoom: from zero to 3.8°


800×480 resolution, 500:1 contrast 16:9 display area with 4:3 adjustment Underscan / Overscan, safe area 3G/HD/SDSDI, HDMI, CVBS input Embedded audio monitoring Real time video zoomin and flip Customer editable video TITLE Snap-on DV mount optional TETAP

30

TETAP

Unit

TETAP

4

TETAP

Unit

51

Control Channel:16/20CH Optional 8-facetrotating prism COLOR wheel with 17 fixed gobos + open Frost filter:Mechanical shutter and adjustable speed strobe effect A mechamical shutter speed stroboscopic effect A mechanical dimmer PAN = 540° TILT = 250° Cooling: Quiet cooling fan and aluminum radiator

90

89

Pemadam ringan

api

TETAP

Certificate: CE Working environment: Indoor Operation temp:20~40℃ Media dry chemical powder Kapasitas 6 Kg

TETAP

2

TETAP

Unit

Tekanan Dalam Tabung 15 Bar Jarak Semprot 3 - 12 M Efektif Penyemprotan 95 %

B. Laboratorium Mini News No Awal

No Perubahan

1

2

1

TETAP

Nama Awal

3 Camcorder

Nama Perubahan

Spesifikasi Awal

4 TETAP


Volume Awal

6

7

8

9

TETAP

2

TETAP

Unit

5 Minimum Requirements


Volume Perubahan

Satuan

52

1/2" Exmor Full HD 3CMOS Sensor MPEG HD422 at 50Mbps Lens with 14x Zoom

2

TETAP

Camcorder

TETAP

Interchangeable Lens Mount System 3.5" 960 x 540 Color LCD Viewfinder Dual ExpressCard/34 SxS Memory Slots SD/HD-SDI & HDMI Outputs Four Channels of 24-bit 48kHz Audio Semi-Shoulder Mount Design Timecode, Genlock, USB 2.0 Interfaces Minimum Requirements Signal System

TETAP 1080/60i NTSC 480/60i

Image Device Pixels

Minimum Illumination

1/4" Exmor R CMOS Sensor (back-illuminated) Total: 6,590,000 Effective: 6,140,000 (16:9); 4,600,000 (4:3) 1.6 lux: MAN setting: SS 1/30 sec, Iris F1.8, Gain 33 dB 0.8 lux: MAN setting: SS 1/15 sec, Iris F1.8, Gain 33 dB

Lens Zoom

Optical: 12x Clear Image Zoom: 24x Digital: 200x

Zoom Control

Servo/manual

Focal Length

f= 2.9 to 34.8 mm


4

TETAP

Unit

53

Focusing Distance

35mm Equivalent 16:9: f= 26.8 to 321.6 mm 35mm Equivalent 4:3: f= 32.8 to 393.6 mm f/1.8 to F3.4 -auto/manual selectable Wide: 0.4" / 10 mm to ∞

Focus Control

Telephoto: 31.5" / 800 mm to ∞ Auto/manual selectable

Iris

Image Stabilization Filter Diameter

ON (Standard/ACTIVE)/OFF selectable, shift lens 37 mm

Display LCD Monitor

3" LCD 921,000 dots

Viewfinder

0.39" OLED 1.44 million dots

Exposure Control Shutter Speed Range White Balance

1/8 to 1/10,000 (1/6 to 1/10,000 in 24p mode) Preset: Indoor, Outdoor Color Temperature Set Range: 2300 to 15000K One-push A, B, Auto selectable 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33 dB -- auto selectable

Gain Recording Video Formats

Recording Rate

HD: MPEG-4 AVC/H.264 (AVCHD) SD: DV codec in AVI wrapper HD: PS (28 Mbps) 1920 x 1080: 60p


54

FX (24 Mbps) 1920 x 1080: 60i, 30p, 24p; 1280 x 720: 60p FH (17 Mbps) 1920 x 1080: 60i, 30p, 24p, 16:9, 1280 x 720/60p, 16:9 HQ (9 Mbps) 1280 x 720: 60p SD:

Recording Media

Maximum Time

Recording

DV (25 Mbps) 720 x 480: 60i Internal: 32 GB Memory Card Slot: SD/SDHC/SDXC and Memory Stick Pro Duo Internal Memory / 32 GB SDHC Card: PS (LPCM): 145 minutes FX (LPCM): 170 minutes FH (LPCM): 225 minutes HG (LPCM): minutes DV (LPCM): 140 minutes

Audio Audio Signal Format

Built-In Microphone

HD: Linear PCM 2channel; 16-bit, 48 kHz / Dolby Digital 2-channel, 16-bit, 48 kHz SD: Linear PCM 2channel; 16-bit, 48 kHz Omni-directional stereo electret condenser microphone

Connectivity Outputs

1 x HDMI 1 x Composite on BNC female 1 x Analog Audio on 2 x RCA female 1 x Headphone on 3.5 mm mini-jack


55

USB

Remote Accessory Shoe

1 x USB 2.0 on mini-AB connector -- for data transfer to a computer and connecting a USB mass storage device 1 x LANC on 2.5 mm submini 1 x Multi Interface Shoe 2 x Cold shoe

Built-In LED Luminous Intensity

3.3' / 1 m: 200 lux 1.6' / 0.5 m: 800 lux

Lighting Angle

30°

Color Temperature

5,500K

Wi-Fi Protocol

IEEE 802.11 b/g/n

Frequency

2.4 GHz

Security

WEP/WPA-PSK/WPA2PSK NFC Forum Type 3 Tag compliant

NFC General Power Requirements

Battery Pack: 7.2 VDC AC Adapter: 8.4 VDC

Power Consumption

3.3 W

Battery Life

Operating Temperature

Approximately 285 minutes with NP-F570 battery -- with video light off Approximately 135 minutes with NP-F570 battery -- with video light on 32 to 104°F / 0 to 40°C

Storage Temperature

-4 to 140°F / -20 to 60°C


56

Dimensions (WxHxD)

Weight

3

TETAP

Framesync

TETAP

10.4 x 9.3 x 6.1" / 265 x 235 x 155 mm -- body only 2.6 x 9.4 x 18.1" / 65 x 240 x 460 mm -- with lens hood, lens cap, microphone, and eyecup (excluding the grip belt and including the projecting parts) 6.2 lb / 2.8 kg (body only) 6.8 lb / 3.1 kg (lens hood, lens cap, microphone, eyecup, shoe cap, and NPF570 battery)


Video Input

Video Input (option)

TETAP 1080/59.94p, 1080/50p (Level-A) 1080/59.94i, 1080/50i, 1080/24PsF, 1080/23.98PsF, 720/59.94p, 720/50p, 525/60 (NTSC), 625/50 (PAL) 3G-SDI: 3 Gbps, HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps, 75Ω × 2 BNC Analog Composite: 1.0 Vp-p, 75Ω BNC × 1 HD Analog Component SD Analog Component

Video Output

Video Output (option)

3G-SDI: 3 Gbps or HDSDI: 1.5 Gbps or SD-SDI: 270 Mbps, 75Ω BNC × 4 (2 × 2 outputs) Analog Composite: 1.0 Vp-p, 75Ω BNC × 2 HD Analog Component SD Analog Component


1

TETAP

Unit

57

Video I/O Process

Video Processing

3 inputs (standard) or 5 inputs (maximum input) → 1 processing → 2 × 2 outputs 4:2:2 Digital Component

Quantization

3G/HD/SD-SDI: 10-bit Analog Composite: 12-bit

Frequency Responsed>

DG/DP S/N Ratio K-factor (2T pulse) Comb Filter Genlock Input

System Phase Control

Video Delay Video Functions

Processing

100 kHz to 4.2 MHz: ?0.5 dB to +0.5 dB 4.2 MHz to 5.0 MHz: ?1.0 dB to +1.0 dB roll off above 5.0 MHz (NTSC, composite) 100 kHz to 4.2 MHz: ?0.5 dB to +0.5 dB
4.2 MHz to 5.5 MHz: ?1.0 dB to +1.0 dB
roll off above 5.5 MHz (PAL, composite) 1% / 1° (composite) 60 dB or higher (without quantization noise, composite) 1% (composite) 2D or 3D comb filter (selectable, composite) BB: NTSC 0.429 Vpp/PAL 0.45 V p-p or Trilevel Sync: 0.6 Vp-p, 75Ω BNC × 1, loop-through (Terminate with 75Ω terminator, if unused.) Frame Sync mode, Line Sync mode, AVDL mode, Input Sync mode*2 Maximum 8 frames (Frame Sync or Input Sync) Up/Down/Cross converter, Aspect ratio converter, Proc Amp, Color corrector, Automatic Video Optimizer, Logo


58

Generator

Proc Amp

Video level: 0.0% to 200.0% Chroma level: 0.0% to 200.0% Black level: ?20.0% to 100.0% HUE: ?179.8° to +180°

Video Clip

YPBPR mode, RGB mode, Composite mode Balance mode, Differential mode, Sepia mode 2 ms to 1,000 ms (adjustable in 1 ms steps) Sampling rate converter (SRC), Gain control, Down mix, Channel remapping, Channel mute Ethernet: 10BASET/100BASETX/1000BASE-T, RJ-45 × 2 Remote (GPI): 9-pin Dsub (male) (7 terminals) ×1 TTL negative logic level signal or Make contact

Color Correction Audio Delay Audio Processing (Set per channel)

4

TETAP

Video Switcher

TETAP


TETAP 1080i 50/59.94i 1080PsF 23.98/24/25/29.97 720p 50/59.94 525/60 (NTSC) 625/50 (PAL) Note: Optional expansion card is required to support 1080/59.94p and 1080/50p.


1

TETAP

Unit

59

Video Input

Video Output

8 x SD/HD-SDI, 75 Ω, BNC (FSs on 8 inputs, resize engines on 4 inputs) Using optional HVSXT100DI Input Card: HD-SDI: 1.5 Gb/s or SDSDI: 270 Mb/s, 4 x 75 Ω, BNC (FSs and resize engines on 4 inputs) Using optional HVSXT100AI Input Card: HD analog component, SD analog component, analog composite Using optional HVSXT100PCI Input Card: HDMI: XGA to WUXGA/HDTV (1080i), XGA to WUXGA (720p), VGA to XGA (SD) RGB: XGA to WUXGA/HDTV (1080i), XGA to WUXGA (720p), VGA to XGA (SD) 4 x SD/HD-SDI, 75 Ω, BNC 1 x HDMI Using optional HVSXT100DO Output Card: 2 x SD/HD-SDI, 75 Ω, BNC Using HVS-XT100AO Output Card (sold separately) HD analog component, SD analog component, analog composite Using HVS-XT100PCO Output Card (sold separately) HDMI: XGA to WUXGA/HDTV (1080i), XGA to WUXGA (720p), VGA to XGA (SD)


60

HDCP Compatible Signal Processing Quantization Effect

RGB: XGA to WUXGA/HDTV (1080i), XGA to WUXGA (720p), VGA to XGA (SD) No 4:2:2:4, digital component SD/HD-SDI: 10-bit WIPE: 100 patterns, border and softness 2.5D DVE: 56 patterns or more DVE WIPEs Available Controller: Fader controller, AUTO or CUT button Type: MIX or WIPE (DVE included) 2 channels (with backup feature) 4 channels (2 x KEYER and 2 x DSK), includes 2D DVE that can be freely assigned KEYER: Chroma key and Edge effect Quad-, 10- or 16-way split views with title, tally, and audio level meter display and 1 frame delay for PGM output Equipped with all inputs

Transitions

Still Store Keyer/DSK

Multi-viewer

Proc Amp Event Memory

Macro

Genlock Input

100 events (complementary transition available when loading events) 30 commands (up to 230 series of operations can be registered per command) Black Burst (NTSC): 0.429 Vpp Black Burst (PAL): 0.45 Vpp Tri-level Sync: 0.6 Vpp, 1 x 75 Ω, BNC, loopthrough (to be terminated with 75 Ω terminator, if


61

unused)

Genlock Output

System Phase Adjust

Black Burst (NTSC): 0.429 Vpp Black Burst (PAL): 0.45 Vpp Tri-level Sync: 0.6 Vpp, 1 x 75 Ω, BNC -1/2 to +1/2 Horizontal

I/O Delay

1H (minimum delay)

External Memory

1 to 2 frames +1H (when FS or re-size engine used) 2 to 3 frames +1H (when FS or re-size engine plus DVE used) 3 to 4 frames +1H (when FS or re-size engine plus output resize engine and DVE used) USB flash drive

Interface

Ethernet (10/100BaseTX): 1 x RJ-45 TO OU: 1 x RJ-45 GPI-IN/OUT: 1 x 25-pin D-sub (female) (24 inputs/24 outputs), TTL negative logic pulse or Make-contact RS-422: 1 x 9-pin D-sub (female) (for the HVS30RU Remote Front Panel with Remote Cable and tally unit connection) EDITOR: 1 x 9-pin D-sub (female), BVS-3000 and GVG-100 protocols ARCNET: 2 x 75 Ω, BNC, loop-through (to be terminated with 75 Ω terminator, if unused)(for control panel an dAUX remote panel connection)


62

Temperature

32 to 104°F (0 to 40°C)

Humidity (Noncondensing) Power / Consumption

10 to 90%

Consumables

Dimensions (W x H x D)

Weight

5

TETAP

Playout Server

TETAP

HVS-XT100 Switcher: 100 to 240 VAC ±10%, 50/60 Hz / approximately 240 W HVS-XT100OU Control Panel: 100 to 240 VAC ±10%, 50/60 Hz / approximately 23 W Power supply unit (to be replaced every 5 years) Cooling fan (to be replaced every 6 years) HVS-XT100 Switcher: Approximately 16.9 x 3.5 x 8.9" (43.0 x 8.8 x 22.5 cm) HVS-XT100OU Control Panel: Approximately 16.5 x 3.4 x 9.7" (42.0 x 8.7 x 24.6 cm) HVS-XT100 Switcher: Approximately 11.0 lb (5.0 kg) HVS-XT100OU Control Panel: Approximately 5.7 lb (2.6 kg)

Minimum Requirements SYSTEM CONFIGURATION MODES:

Software:

TETAP - Multi Parallel Output – 2 simultenious outputs (SDI or/and Streaming) - Simultaneous Mixed Playback with LIVE In Switch and Interactive Graphics & Ingest - SD AirBox with PRO and Streaming Options: Router Control: Kramer, Leitch,Pesa, Quartz, etc * Video Scaling (Squeeze) of the playlist content


1

TETAP

Unit

63

* TitleBox Net Control – Control of TitleBox on the same or on remote PCs * MPEG2 and H.264 Live Input Stream Support * DTMF & SCTE 35 (DTMF part) Decoding for Commercial Insertion - SD TitleBox - ListBox Video Out:

- SD/HD SDI; Analog Component or Composite - SD/HD SDI

Video In: Audio Out:

- Embedded Audio, 2x Unbalanced AES/EBU; 2x Analog XLR - Embedded Audio

Audio In: Sync Input:

- Blackburst in SD/ TriSync in HD - 4RU Rackmount Server

Hardware :

- Single PSU; Single Intel® CPU; - Two (2) Gigabit Ethernet ports: System Storage Single HDD Video Storage 1TB Single HDD; OS: Microsoft Windows 7 x64; 6

TETAP

Virtual System

Studio

TETAP

Minimum Requirements 3D Virtual Studio System provides a comprehensive and user friendly solution for a realtime 3D Virtual Studio Environment for Live broadcast, Post-production and e-learning - Up to 10 input channels, each channel can support SD or HD signals from live camera or recorder or other signal source

Minimum Requirements Software :

3D Virtual Studio System provides a comprehensive and user friendly solution for a realtime 3D Virtual Studio Environment for Live broadcast, Post-production and e-learning


1

TETAP

Unit

64

- 12 virtual cameras in any location in the virtual set, each can be treated like a node and be connected by preset string, realize the swinging of camera and make a tracking shot like tracking system.

- 12 Virtual cameras which can be rotated in 360 degree and can quickly switch between any two - All virtual objects in the virtual set can be adjusted by clicks on the full graphical operating board separately in real time Controllable illumination on the scene, adjustable reflection on the floor and other objects - Background animation function for creating fancy animation of any object in the scene.

- Up to 10 input channels, each channel can support SD or HD signals from live camera or recorder or other signal source - 12 virtual cameras in any location in the virtual set, each can be treated like a node and be connected by preset string, realize the swinging of camera and make a tracking shot like tracking system. - 12 Virtual cameras which can be rotated in 360 degree and can quickly switch between any two - All virtual objects in the virtual set can be adjusted by clicks on the full graphical operating board separately in real time - Controllable illumination on the scene, adjustable reflection on the floor and other objects - Background animation function for creating fancy animation of any object in the scene. Hardware : Intel i7 -3 Gen 4770k 4x DDR3 8 GB PC3-12800 (8 GB x 2) 4x SSD 840 Series (120 GB) 16x DVD+RW Super Multi SATA 1st Drive Nvidia Geforce GTX970 Gigabit Lan Windows 7 Ultimate 64


65

Bit 2x Declink studio 4K Extreme Server rackmount chasis with hotswap KVM USB+ Mouse + Keyboard 2x Monitor 27" LED 7

TETAP

Remote Panel

Control

TETAP


TETAP

2

TETAP

Unit

TETAP

2

TETAP

Unit

TETAP

2

TETAP

Unit

TETAP

1

TETAP

Unit

Remote control unit. It provides an even more affordable solution for basic remote camera operations, with added features including the remote control of media and the operation of clips of nonlinear media. It can be directly connected to a camera or camcorder as a portable-type remote control unit or it can be connected to a CCU for use as a simple remote control panel. RCP can control a camera from a distance of up to 100m (328 feet) when connected directly to the camera. 8

TETAP

Remote Control Panel Cable

TETAP

Minimum Requirements control cable for BVP broadcast cameras and remote cameras. The cable let's users control the camera up to 30 meters (98 feet) away.

9

TETAP

Zoom & Control

Focus

TETAP

Minimum Requirements Clamp distance: 0mm (0.39in) ~ 30mm (1.18in) Connector cable: 8pin Cable length: 750mm (29.5in) Operation temperature range: -10oC ~ 40oC (State without dew condenstion) Record / Return exchange switch: REC (Record) or RET (Return) REC/RET Button: Start / Stop (Record or Return) ZOOM: Zoom lever can be variable for zoom speed

10

TETAP

Caracter Generator

TETAP

Minimum Requirements Software:

TitleBox


66

- Interactive Character Generator or graphics slaved under AirBox Automation mode; - Unlimited layering like Still text, Crawl; Animations (32-bit TGA sequence, Animated GIF, Flash); Analogue and digital clocks, countdowns, timers; Pictures & Banners; Video Objects Playback, Power Point Presentations; Internet webpage dispay; - Total on-air graphics control with dynamic speed control; Slide Sequencer; Transitions (In/Out); Advanced graphics scheduling; - Dynamic data sources (Text, RTF, RSS, ODBC); - AsRun logging; OEM applications via TitleBox API SD/HD SDI; Analog Component or Composite Embedded Audio, 2x Unbalanced AES/EBU; 2x Analog XLR Blackburst in SD/ TriSync in HD - 3RU / 1RU Rackmount Server - Redundant (1 + 1) PSU; Hot Swap Hard Drives; - Two (2) Gigabit Ethernet ports; System HDDs with RAID 1; Video Storage: 3TB SATA with RAID5; OS: Microsoft Windows 7 x64;

Video Out: Audio Out: Sync Input: Hardware :

11

TETAP

Quad Master

Channels

TETAP



TETAP

1

TETAP

Unit

67

Dual channel, 50-60 Belpack capability Program Input (Mic/Line) with volume control and CHA/CHB Send switches Mic balanced output for paging Remote All mic-Off (Mic-Kill) and all Buzzers-Off (Buzz-Kill) switches to both channels. Dual call/talk switches

12

TETAP

Desk remote Dual Channel

TETAP

Multichannel operation by Master-Slave output Link connectors Internal Batteray operation enabling short time emergency communications on Power dropouts Relay contacts available NO/NC for multipurpose remote control, enabling Tally, radio station PTT switching 200 Ohm System Line Impedance Minimum Requirements

TETAP

1

TETAP

Unit

TETAP

2

TETAP

Unit

TETAP

6

TETAP

Unit

Speaker / Goosenec Dual channel desk / wall station Headset Connection with automatic Mic loudspeaker disabling Dual call A/B switches with high visibilty light

and

Microphone Limiter for confortable communication

13

TETAP

Microphone

TETAP

Programable function Remote Speaker-On, Remote Mic-On, Buzzer-off start-up Minimum Requirements Mikrofon jenis Gooseneck Pola kutub Dinamik omnidirectional Panjang mikrofon 380 mm Panjang kapsul 70 mm Diameter kapsul 3.0 ø

14

TETAP

Single Beltpack

Channel

TETAP

Minimum Requirements Metallic (Aluminium) low weight enclosure. Oval shaped. Plastic clip. Mic on/off push switch logic function (push to talk or latching).


68

15

TETAP

Single Muff Headset

TETAP

Remote Mic-off (Mic kill) operation. Remote Buzz-off (Buzz kill) operation. Bright CALL switch with signalling led. Microphone limiter easing comfortable communications. Internal presets for mic gain, mic phantom, limiter disabled, etc. Minimum Requirements

TETAP

6

TETAP

Unit

Mic: Dynamic, 200 ohm directional. Headphones: 200 ohm. 16

17

TETAP

DIHILANGKAN

Double Headset

Muff

Monitor broadcast

TETAP


TETAP

3

TETAP

Unit

TETAP

Mic: Dynamic, 200 ohm directional. Headphones: 200 ohm (2x400 ohm). Minimum Requirements

-

1

0

Unit

TETAP

1

TETAP

Unit

1366 x 768 1080/60p 10-bit 4:4:4 Processing

Video

900:1 Contrast Ratio 350cd/m²

18

17

SDI Monitoring

TETAP

16:9 / 4:3 Aspect Ratio Wide 178° Viewing Angles 12-channel Audio Level Meter HD/SD-SDI, DVI-D, Composite Safety Markers & Tally Lamps Minimum Requirements 17" Supports SD/HD/3 Gb/s SDI Formats 1920 x 1080 Resolution and Glossy Screen


69

3 Gb/s SDI Video Inputs Integrated Tally for Live Broadcast Fully Digital Adjustments

19

18

Video Monitor

TETAP

Built-in Ethernet Centralized Network Based Control For Multi-monitor Installations Minimum Requirements

TETAP

1

TETAP

Unit

TETAP

1

TETAP

Unit

Supports SD/HD/3G/6G-SDI Auto Format Sensing & Selection 1 x Loop Through SDI I/O per Monitor Select Video, Waveform, Vectorscope RGB Parade, YUV Parade, Histogram Audio Phase & Levels

20

19

Audio Monitor

TETAP

Software Control via Ethernet Auto Orientation Sensing & Image Flip Minimum Requirements 2 x Channel AES/EBU Digital Audio Input L/R Balanced & Unbalanced Analog Input 2 x 27-Segment LED VU Meters Front Panel Illuminated Keypad Front Panel 1/4" Headphone Jack Supports SD/HD/Ultra HD @ 10-bit via SDI 16 x Channels Audio Output via SDI Out 2 x Channels Embedded Audio via HDMI Out


70

21

20

SDI Monitoring

TETAP

Available Dolby Decoder Upgrade Card 1RU-Sized Unit with Class A/B Amplifier Minimum Requirements

TETAP

2

TETAP

Unit

3G/HD/SD-SDI Inputs, Both with Loop-Out Integrated Tally for Live Broadcast Ethernet Input for Adjustments 2K, 1080i/p, 720p & 50/60 Hz SD Support 10-Bit Color & 4:2:2 / 4:4:4 Sampling 22

23

21

22

Mini Converter

Mini Converter

TETAP

800 x 480 Resolution Minimum Requirements

TETAP

3

TETAP

Unit

TETAP

Device to convert analog video sources to SDI video output Embed SDI audio from balanced AES/EBU or analog audio inputs Minimum Requirements

TETAP

4

TETAP

Unit

TETAP

4

TETAP

Unit

Single Link SD/HD/3G/6G-SDI Input Component, Composite, & S-Video Output SD, HD, UHD 4K & DCI 4K Input Signals Automatic Input Signal Detection Redundant SDI Input & Looped SDI Output Analog & AES-EBU Digital Audio Outputs 24-bit, 48 kHz Audio 24

23

Distribution Amplifier

TETAP

Minimum Requirements Max. Data Rate − 1.485 Gbps SDI, HD−SDI & Dual Link HD−SDI Dual−Mode − Two 1:2 or one dual link 1:2 DA


71

HD−SDI & SDI Input Indication LEDs. Rack Kit Audio - E 25

24

Multi-Standard Video and Audio Signal Generator

TETAP


TETAP

1

TETAP

Unit

TETAP

2

TETAP

Unit

TETAP

Beryllium Copper & Gold-plated Contacts 2RU Lightweight Alloy Body Slim BNC Crimp Plug/Easy Maintenance Minimum Requirements

TETAP

10

TETAP

Unit

TETAP

Video Jackfields Very High Density Minimum Requirements

TETAP

2

TETAP

Unit

8 Color Bar Patterns Color Bar or Black Burst − Each output SCH / Phase Adjust. Looping Analog Genlock Input . Audio Outputs − 2 XLR, 2 RCA , AES−3id & AES/EBU Control − RS−232 Size - 19” (1U) "ears" included. Audio - B/D/U 26

25

Video Patch Panel

TETAP

Rack

Minimum Requirements 75ohm Dual Video Jacks For HD-SDI / Serial Digital Video Bandwidth - DC to 3.0 Ghz Return Loss > 10 dB

27

28

26

27

Video (Black) Tripod

Patchcord

Payload

16kg / 35.0lb


72

29

28

Teleprompter

TETAP

Counterbalance

FIX

Drag mode

2STEP

Tilt angle Temperature range

+85°/ -65° -20°C to +60°C / -4°F to +140°F

Bubble level

Non illuminated

Camera plate

Sliding plate

Sliding range

+/-50mm / 2.0"

Plate attachment

3/8" screw × 2

Spare screw

3/8" screw

Weight Height

10.9kg / 24.0lb 91.5 to 187cm / 36.0 to 73.5"

Ball diameter

100mm

Section Minimum Requirements

2STAGE

Viewable Size

15 Inch 250 NTS

Brightness

TETAP

1

TETAP

Unit

1

TETAP

Unit

SVGA

Signal Input Input Voltage

100 - 240 VAC 15 Pin D Type

30

29

Komputer Desktop

PC All In One

Input Connector Minimum Requirements Processor Hardisk


Memory Vga Optical drive

Minimum Requirements Processor Hardisk


2GB DDR3

Memory

2GB DDR3

NVIDIA GeForce 705 1GB

Vga

Intel HD

DVD±RW

Display

20" WXGA

Networking

Wifi


73

Bluetooth Operating system Optical drive 31

30

Scan Converter

TETAP


Windows DVD±RW TETAP

1

TETAP

Unit

TETAP

2

TETAP

Unit

TETAP

3

2

Unit

HDTV Input − Up to 1080p Looping 15−pin HD Input ProcAmp Controls Multi−Standard Output − PAL or NTSC Flicker Reduction Freeze Frame Overscan / Underscan

32

31

Standart Devinison Video

TETAP

Control − Front Panel & IR Minimum Requirements Bandwidth − 5MHz (−0.2dB) SDI Outputs − Reclocked Multi−Standard − PAL, SECAM & NTSC Proc−Amp Control Control − RS−232

33

32

TV LED

TETAP

Minimum Requirements Ukuran Resolution

32" 1920x1080 True Color Accuracy Time Machine II Triple HD Engine Picture Wizard III


74

Port

USB HDMI With Stand Bracket

34

33

TV LED

TETAP

Minimum Requirements Ukuran

42"

Resolution

4K, 1920 x 1080 (Full HD) IPS Panel

TETAP

3

2

Unit

TETAP

1

TETAP

Unit

Triple XD Engine, 4K XReality™ PRO Clear Voice II HDMI USB With Stand Bracket 35

34

Portable Recorder

File

TETAP

Minimum Requirements Video

Audio

Inputs: 1x HD/SD-SDI Supported Input Resolutions: 1080p(23.976, 24) 1080i(50, 59.94, 60), 720p(50, 59.94, 60), 576i, 480i Outputs: 1x HD/SD-SDI, 1x HDMI Inputs: 2x Balanced XLR (Analog Stereo Pair 2Channels) Outputs: 2x Balanced XLR (Stereo Pair 2-Channels) Embedding: Stereo Audio embedded to HD/SD-SDI (8-Channels) and HDMI (4-Channels) outputs and to saved file Recording Format: PCM 24-bits / 8-Channels / 48KHz Sampling Rate


75

Loop Through

1x HD/SD-SDI

Interface

USB & SATA

Saved File

MXF OP1A

Color Sampling

MOV (currently unsupported in Adobe Premier CC) HD (35-125Mbps): 4:2:2 HD (10-25Mbps): 4:2:0 SD (15-50Mbps): 4:2:2 SD (8Mbps): 4:2:0

Hard Drive

320GB HDD Included Compatible Drives

36

35

Talent Receiver

TETAP

37

36

Earset Kit

TETAP

38

37

16-Channel FireWire Recording Mixer

TETAP

with

SSD

Minimum Requirements Earphone Type: Dynamic Earphone Impedance: >30 ohms Max. Output Level: +20 dBm Power Required: 10 mA quiescent at 28 VDC supplied by IFB line Headset Connector: 3-pin female XLR (at end of 6'cord) Complete Earset with ⅛” Straight Connector & eartube Minimum Requirements Total # Of Inputs

16

Mic/Line Inputs

8 x Microphone Inputs

Stereo Line Inputs AUX Sends

12 x Line Inputs (channels 1 & 2 can be switched to Hi-Z instrument level) 3-band Perkins EQ on stereo line channels 4


TETAP

3

TETAP

Unit

TETAP

4

TETAP

Unit

TETAP

1

TETAP

Unit

76

AUX Returns

4 Stereo Returns

Inserts

8 x Channel Inserts

BUS (Group) Outputs

None

2 Trk Master I/O

2 x Balanced XLR Outputs with Mic or Line-Level Output Button 2 x TRS 1/4" Alt. Output

ALT I/O

Monitor Outputs

EQ Section

Solo/Mute Channel Level Control Trim/Gain Control Phantom Power Metering

Frequency Response

Stereo RCA Tape Input & Output 2 x Balanced TRS 1/4" Control Room Outputs (with dedicated volume knob) 1 x Stereo 1/4" Headphone Output (with dedicated volume knob) 8 x 4-Band EQ with a High Mid Sweep and a Low Mid Sweep 4 x 3-Band EQ (on stereo channels) Yes, on every channel 60mm Channel & Master Faders Rotary Knob Yes, +48V (on every mic channel with individual buttons) 12-Segment LED Master Meter 2-Segment LED Meter On Every Channel Mic input to any output with all gain stages at unity: +0/-0.5 dB, 20 Hz to 20 kHz Stereo channel line input to any output with all gain stages at unity: +0/0.5 dB, 20 Hz to 20 kHz FireWire In & Out at 44.1 kHz: +/-0.5 dB, 20 Hz to 20 kHz, -3 dB at 21 kHz


77

FireWire In & Out at 96 kHz: +/-0.5 dB, 20 Hz to 20 kHz, -3 dB at 45 kHz Total Harmonic Distortion (THD)

(+4 dBu in, 0 dB gain, +4 dBu out): 0.0057% Universal AC Power Supply, 100 VAC - 240 VAC, 50 - 60 Hz

Power Supply 39

38

Clip on Wireless

TETAP

20 Hz to 20 Hz, 20 Hz to 80 kHz Bandwidth Mic Input at Insert


TETAP

System Type of System RF Carrier Frequency Range Approx. Working Range Overall Response

Frequency

True Diversity Wireless Lavalier System A (516-558 MHz)

UHF Mic

Not Specified Manufacturer Line: 25Hz - 18kHz

By

Mic: 80Hz - 18kHz Signal-to-Noise Ratio

> / - 110dBA

# Of Channels

1680

# Of Systems Receiver

Simultaneous

Type of Receiver Type of Outputs

20 Channel Banks, 1 Fixed Bank, 12 Factory Preset Channels Each Not Specified By Manufacturer EM 100 G3 Rackmount Receiver Balanced XLR Unbalanced 1/4" Phone


1/4" Phone (Front Panel)

Power Requirements

12VDC

Battery Life

Not Applicable

Type/Approx.


4

TETAP

Unit

78

Display


Mounting Options

Optional GA 3 Rackmount Kit (Not Included) BNC Type x2

Antenna Type Dimensions

7.48 x 8.35 x 1.69" (190 x 212 x 43mm) 1.99 lb (900g)

Weight Transmitter Type of Transmitter Type of Input Connector Type of Microphone Polar Pattern Interchangeable Mic Heads Battery Type/Approx. Life Mute Switch

40

39

Boom Mic

TETAP

SK 100 Bodypack Transmitter Locking 1/8" (3.5mm) Mini ME 4 Lavalier Microphone Cardioid Not Applicable

Level Control

AA 1.5V Batteries x2 (8 Hours Typ.) Programmable Mute Function Yes

Antenna Type

1/4 Wave

Display

Back-Lit LCD

Minimum Requirements Transducer Polar Pattern Frequency Response

TETAP Pressure Gradient/Interference Receiver Condenser Low, Mid: Hypercardioid Above 2 kHz: Lobar 40 to 20,000 Hz

Dynamic Range (Typical) Signal-to-Noise Ratio

117 dB

Maximum Input Sound Level

130 dB, (@ 1 KHz)

Power Requirements

81 dB

Sensitivity 25 mV/Pa +/1dB Phantom Power 48v, (± 12v)


2

TETAP

Unit

79

Output Impedance

41

40

Circumaural Closed-Back Monitor Headphones

TETAP

Output Connectors

Nominal Impedance: 25 Ohms Minimum Terminating Impedance: 800 Ohms XLR-3M Type

Pad

None

Low Frequency Roll-Off

None

Applications

Film, Radio and Television, Especially for Outside Broadcast Applications.


Type

Circumaural, closed-back

Frequency Range

8Hz - 25kHz

Impedance

64 Ohms

Sensitivity

102dB SPL/mW

Maximum Input Power

500mW

Connectors

3.5mm stereo mini plug with screw-type 1/4" adapter 10' (3 m) (coiled)

Cable Length 42

41

Active Speaker

TETAP

Minimum Requirements Frequency Response

57 Hz - 20 kHz, (-3 dB)

SPL

102 dB SPL @ 1m (+4 dBu into balanced input) 108 dB SPL @ 1m (per pair) Low frequency: 5.25" (133 mm hyperbolic curved cone woofer) High frequency: 1" (neodymium magnet driven 25 mm silk dome tweeter) Low frequency power: 30 watts, 4 ohm load, 60 watts peak

Maximum SPL Transducer

Amplifier


TETAP

2

TETAP

Unit

TETAP

1

TETAP

Pair

80

AC Power

High frequency power: 20 watts, 8 ohm load, 40 watts peak Type: monolithic IC, class AB with DMOS power stage Crossover type: 24 dB/octave Crossover frequency: 3 kHz Sensitivity: +4 dBu at 300 Hz for full output Input Impedance: 20 kohm balanced bridging; 10 kohm unbalanced Low frequency EQ: +2 dB/+4 dB @ 100 Hz, shelving High frequency EQ: +/- 2 dB @ 3 kHz, shelving 120 VAC, 60 Hz (US)

Fuse

3-pin IEC 250 VAC, 16 A male connector 115 VAC: T 1 AL / 250 V

Crossover

Equalization

Power Consumption

Enclosure

.47" (12 mm) thick MDF with .98" (25 mm) MDF front panel Adiabatic batting

Damping Dimensions

11.3 x 7.8 x 10.9" (286 x 197 x 276 mm) 12.1 lb (5.5 kg)

Weight 43

42

Portable Powered Loudspeaker

TETAP

230 VAC: T 500 mAL / 250 V 90 watts with music, loud mix 7 watts quiescent (idle)

Minimum Requirements Frequency Response

TETAP 47 Hz - 20 kHz (-3 dB) 42 Hz - 23 kHz (-10 dB)

Maximum SPL

128 dB SPL


2

TETAP

Unit

81

Dispersion

90˚ x 45˚, (H x V)

Compression Driver

1.4' (36 mm)

Crossover Frequency

3 kHz

Diaphragm

Titanium (tweeter)

Magnet

Ferrite

Woofer Diameter

12.0" (305 mm)

Cone Material

Paper (woofer)

Rated Power

500 W RMS, 1000 W peak (overall) 400 W RMS, 800 W peak (LF) 100 W RMS, 200 W peak (HF) Class D (LF)

Amplification

Class AB (HF) THD

< 1%

Cooling

Convection

Input

Channel 1: Mic/Line, female XLR / 1/4" TRS combo Channel 2: Mic/Line, female XLR / 1/4" TRS combo, stereo RCA Channel 1: 8 kohms balanced , 10 Mohm unbalanced Channel 2: 8 kohms balanced , 25 kohms unbalanced Male XLR balanced

Input Impedance

Thru

Power

Passive when the Ch 1 / Mix switch is in the "out" (Ch 1) position Active when the Ch 1 / Mix switch is in the "in" (Mix) position US Detachable Line Cord: 100 – 120 VAC, 50 – 60 Hz, 160W


82

EU Detachable Line Cord: 220 – 240 VAC, 50 – 60 Hz, 160W AC Connector: 3-pin IEC 250 VAC, 10 A male Power Supply Type: Switchmode Operating Temperature: 0 - 40º C Extended Ambient Temperature: 32 - 104º F Input Protection

LED

Construction

Peak and RMS limiting, power supply and amplifier thermal protection Defeatable front power, input signal/OL, speaker mode, feedback destroyer on/off and active filters, system limiter Cabinet: polypropylene Finish: black, textured finish Grille: perforated metal with weather-resistant coating Fly points: three M 0.4 x .05 x .78" (10 x 1.5 x 20 mm) Monitor angle: 40º

44

43

4 Channel Compressor/Limiter and Peak Limiter

TETAP

Minimum Requirements Function

TETAP

Number of Channels

4-channel compressor/limiter peak limiter Four

Inputs

4 x XLR

and

4 x 1/4" TRS phone Outputs

4 x XLR 4 x 1/4" TRS phone


1

TETAP

Unit

83

Maximum Input Level

+21dBu

Compression Threshold

-40dB to +20dB, variable

Compression Ratio

1:1 to infinity:1, variable

Attack Time

Automatic

Release Time

Automatic

Gate Threshold

Not applicable

Gate Rate

Not applicable

Maximum Output Level

+21dBu

Make-up Gain

-20dB to +20dB, variable

Frequency Response

0.35Hz to 200kHz, +0/3dB Not specified by manufacturer >95dBu, unweighted

Dynamic Range Noise Specialties 45

46

47

48

44

45

46

47

Light LED camera

Battery Charger

Lithium Battery

Tripod

for

Channels 1/2 and 3/4 can be linked for dual stereo operation

TETAP


TETAP

6

TETAP

Unit

TETAP

Light Source 160 LED, Color Temperature 5500K, Color Rendering Index Approx. 87,5%, Power 10w, Lumens 1280, Luminance Angle 55 degrees, Average Service Life 20000H, Weight 720g, Size lebar 15cm x tinggi 12cm x dalam 6cm Minimum Requirements

TETAP

6

TETAP

Unit

6

TETAP

Unit

6

TETAP

Unit

TETAP

TETAP

Output Voltage

DC 8.4 V / 1.8 A

Power Requirements

100-240 V, 50/60 Hz

Minimum Requirements Chemistry

Lithium-Ion

Output Voltage

7.2 V

Capacity

6300 mAh



TETAP

84

Complete Tripod Kit Aluminum Construction Supports Up to 6.5 lb (3.0 kg) 59" Maximum Height Head with SpringLoaded Counter Balance 65mm Leveling Ball Sliding Quick Release Plate Two-Stage Leg Design with Built-in Brace Spiked Rubber Feet Carrying Case Included 49

48

Handy Recorder

Audio

TETAP


TETAP

2

TETAP

Unit

TETAP

12

TETAP

Unit

Accessories Included True X/Y Stereo Mics Selectable Recording Patterns Records up to 24bit/96kHz Records to SD/SDHC XLR/TRS Combo Inputs Built-In Speaker USB 2.0 Connectivity Backlit LCD Display Uses AA Batteries 50

49

Memory Card

TETAP

Minimum Requirements Card Type

microSDHC

Storage Capacity

32 GB

Speed Class

10

UHS Speed Class

U1


85

Bus Interface Speed

UHS Class I

Data Transfer

Read Speed 40 MB/s Maximum Write Speed 10 MB/s Minimum Temperature Extremes, Waterproof -13 to 185°F/ -25 to 85°C FAT32

Durability Operating Temperature File System 51

52

53

50

51

52

Soft carrying case

Drone + Camera 3 axis Gimbal

Floresence Lighting 6 Bank

TETAP


TETAP

6

TETAP

Unit

TETAP

Waterproofed Cordura Nylon Minimum Requirements

TETAP

2

TETAP

Unit

TETAP

Capture 4K Video and 12MP Stills 3-Axis Gimbal Stabilizes Camera Up to 1.2 Mile Radio Range GPS-Based Stabilization System Optical Flow Sensor for Indoor Flying Lightbridge System Integrated Live 720p HD Monitoring with Lightbridge Retractable Carbon Fiber Arms Unobstructed 360° Shooting Dual Transmitter Operation Supported Minimum Requirements

9

6

Unit

5m cable with Pro video switch. Equipped with barn doors. Universal bracket is compatible with all standard light stands Video Translucent paper

Minimum Requirements Dimmable with remote control Distance of radio control 15 M High frequency no flicker High RI Supply excellent light for


86

included.

DV and Photography

Shutter speed up to 1/250 OSRAM DULUX L 954 (3000K OSRAM DULUX L 930 avalaible to be chosen) 55W TUBE color temperature 5500K,CRI>90.

Color temperature 5400K Ra>90 Power W

54

53

Lighting Control

TETAP


330 TETAP

1

TETAP

Unit

TETAP

12

TETAP

Unit

TETAP

1

TETAP

Unit

Signal output : (1) Mixer 16 chanel (2)24 channel analog signal 0-10V Direct control ke 96 channel (4 pages). Kontrol CH 97-512 dgn fungsi PATCH. 96 scene (tiap page key dapat menyimpan 24 scene). 24 programmable chaser patterns. Tiap program chaser mampu sampai 64 step 2 set individual cross fader Program data bisa disimpan di external memory card 55

59

54

55

Lighting Stand

ProJib

TETAP

TETAP

Minimum Requirements Minimum Height

19.3" (49cm)

Maximum Height

6.2' (1.9 m)

Closed Length

~19" (48.3cm)

Footprint Diameter

3.3' (1 m)

Weight

~2 lbs (0.93kg)

Maximum Load

3.3 lbs (1.5kg)

Attachment Size

5/8" stud with 3/8" threaded top, 1/4"-20 threaded adapter

Minimum Requirements Jib Tripod mount of 100mm diameter Robust Aluminum & Stainless Steel construction


87

At Max Height Length of Jib Arm - 12ft Pan Radius of 360 Degrees Tripod Max length of tripod 62 inch Minimum length of tripod - 27 inch Collapsible height - 32 inch Tripod tubes made of Aluminum Diameter of tripod tubes - 20mm and 14mm Load capacity – 45kg/100lb Include : 100mm Camera mounts Assembly Hubs 100mm Bowl Tripod stands Tripod Spreaders Underslung heads 60

56

AC SPLIT 2 PK

TETAP


TETAP

10

4

Unit

TETAP

1

TETAP

Lot

AC Split 2 PK Low watt Auto cleaning Filter udara anti baketri 61

57

Material Instalasi

TETAP

Kabel (Listrik Serabut (NYY HY), warna hitam, jenis ukuran 2x2.5, jenis ukuran 3x2.5; speaker; microphone; RG-45; video; snake cable 16 input-4 output-30 meter) Konektor (listrik, jack speaker male female; jack XLR male female; jack TRS 1.4 inch, 3.5 mm, 2.5 mm male female; RCA male female) Instal software


88

Karpet master control room Panel listrik master control room dan studio Peredam suara ringan Kabel Try Standard Equipment Rack Meja Console Video & Audio Lemari Store Cam Penutup Ruangan 62

58

Pemadam ringan

api

TETAP

Media dry chemical powder Kapasitas 6 Kg

TETAP

2

TETAP

Unit

TETAP

1

TETAP

Unit

TETAP

1

TETAP

set

TETAP

2

TETAP

Unit

Tekanan Dalam Tabung 15 Bar Jarak Semprot 3 - 12 M Efektif 95 % 63

59

Outside Broadcast

TETAP

Mobile Broadcast

TETAP

Chasis

TETAP

Karoseri

TETAP

Penyemprotan

Mesin

Diesel

Transmissi

Manual

Body Dudukan Genset Panel Instrument Instalasi

Peralatan

TETAP

Handycam Camcorder

TETAP

Minimum Requirements 1/4" Exmor R CMOS Sensor 26.8mm Equivalent Wide-Angle Lens


89

Production Switcher

TETAP

Records SD in DV AVI File Viewfinder with 1.44 Million Dots Flip-Up 3" LCD with 921k Dot Resolution Wi-Fi Connectivity with NFC Internal 32GB Flash Memory Sony Multi-Interface Hot Shoe BNC Connector on Composite Output SDXC/Memory Stick Card Slot Minimum Requirements Video Switcher Monitor LED 32" Datavideo System Include :

Intercom

Main System

Main System

Beltpack

Beltpack

Headset

Headset

Mixer 12 Ch Behringer Xenyx 1202FX Active speaker 1 pair genelec 6010A

Mixer 12 Ch

Portable File Recorder 3G Bonding Streaming with 6 SimCard Mini Converter

TETAP

Minimum Requirements Video Switcher Monitor Broadcast Intercom System Include :

1

TETAP

Set

4

TETAP

Unit

Active speaker (pair) Portable File Recorder 3G Bonding Streaming with 4 SimCard

Minimum Requirements Device to convert analog video sources to SDI video output Embed SDI audio from balanced AES/EBU or analog audio inputs


TETAP

90

Clip on Wireless

TETAP


TETAP

System Type of System RF Carrier Frequency Range Approx. Working Range Overall Response

Frequency

True Diversity Wireless Lavalier System A (516-558 MHz)

UHF Mic

Not Specified Manufacturer Line: 25Hz - 18kHz

By

Mic: 80Hz - 18kHz Signal-to-Noise Ratio

> / - 110dBA

# Of Channels

1680

# Of Systems Receiver

Simultaneous

Type of Receiver Type of Outputs

20 Channel Banks, 1 Fixed Bank, 12 Factory Preset Channels Each Not Specified By Manufacturer EM 100 G3 Rackmount Receiver Balanced XLR Unbalanced 1/4" Phone


1/4" Phone (Front Panel)

Power Requirements

12VDC

Battery Life Display

Not Applicable

Type/Approx.


Mounting Options Antenna Type Dimensions Weight

Optional GA 3 Rackmount Kit (Not Included) BNC Type x2 7.48 x 8.35 x 1.69" (190 x 212 x 43mm) 1.99 lb (900g)

Transmitter


2

TETAP

Unit

91

Type of Transmitter Type of Input Connector Type of Microphone Polar Pattern Interchangeable Mic Heads Battery Type/Approx. Life Mute Switch

Floresence Lighting 6 Bank

TETAP

SK 100 Bodypack Transmitter Locking 1/8" (3.5mm) Mini ME 4 Lavalier Microphone Cardioid Not Applicable

Level Control

AA 1.5V Batteries x2 (8 Hours Typ.) Programmable Mute Function Yes

Antenna Type

1/4 Wave

Display

Back-Lit LCD

Minimum Requirements Thickness - 5mm Operating Temperature - 20° C - +80° C Power - 15v DC input Size of light - 39x39cm Weight - 5 lbs. (2.29 Kg) Volumetric - 6.5kg Wide dispersion beam angle of 60 degrees Box size - L 47 x W 43 x H 15 cms Weight of light stands 1.6kg each AC Adaptor 100-240V 12 square (30.48cm) 2 stage riser sections extend to 7' 50,000 + hour lamp life 1.7 meter DC cable 4 way barn doors


TETAP

3

TETAP

Unit

92

Include : 2 x 1000 White LED Lights with Barn Door V-Mount Battery Plate 2 x Gel Filter Albums 2 x AC Adapters 2 x Universal Adapters 2 x Light Stands Genset

TETAP

Minimum Requirements Type Displacement Net Power (SAE J1349)*

Max. Net Torque (SAE J1349)* Fuel tank capacity

8.7kW (11.7 HP)/3600 min-1 rpm 7.0kW (9.4 HP)/3600 min-1 rpm 26.5 N.m (2.7 kgf.m, 19.5 lbf.ft)/2500 min-1 24 L

Starting system

Recoil, Electric starter

Continuous operating hour Operating noise level

8.1 hr

Rated power output

Oil capacity AC Pemadam Ringan

Api

Air Cooled, 4-stroke OHV, Single cylinder 389 cm3

Minimum Requirements Genset Portable Inverter Silence Daya Output Maksimum Daya Output Rata-rata Frekuensi Rata-rata Voltase Ratarata Starting system

1

TETAP

Unit

3.0 KVA / 3000 Watt 2.8 KVA / 2800 Watt 50 Hz AC 220 V/ 1 Phase Recoil, starter

Electric

(7m) : 72 dB, (Lwa) : 99 dB 1.1 L

TETAP

Kekuatan 1/2 PK

1

TETAP

Unit

TETAP

Media dry chemical powder Kapasitas 2 Kg

1

TETAP

Unit

Tekanan Dalam Tabung 15 Bar Jarak Semprot 2 - 6 M Efektif 95 %

Penyemprotan


93

64

60

Pemancar Radio

TETAP

FM Transmitter FM 1000 WATT * Exciter 30 watt -Sertifikasi A Postel -Broad Band Frequency 87.5 - 108 MHz Amplifier 1000 wattDigital Version Amplifier 1000 wat garansi service 1 tahun garansi speart part 6 bulan ANTENA FM 4 BAYS max power 4 kw * Antena 4Bay System sierra * Power Divider * 4unit Jumper Coaxial Cabel 7/8 Connector 7/8" MATERIAL INSTALASI Rubber Tape Accesories Cable tie Grounding Kit Heliax Clamp Pemasangan ( Diluar Transport dan Akomodasi ) Ongkos kirim

1

TETAP

Paket

C. Laboratorium Editing No 1 1

Nama Awal

Nama Perubahan

2 PC All in one

3 TETAP

Spesifikasi Awal

Display

4 3.5GHz Quad-core Intel Core i5, Turbo Boost up to 3.9GHz 8GB 1600MHz DDR3 SDRAM 2x4GB 1TB Fusion Drive AMD Radeon R9 M290X 2GB GDDR5 27-inch with Retina 5K Display

Operation System Optical Drive

Mac OS X Yosemite DVD-RW

Networking

Bluetooth, Wifi

Min. Processor Memory

Req

Hardisk VGA


Volume Awal

Volume Perubahan

Satuan

5 TETAP

6 25

7 20

8 Unit


94

Accesories Camera 2

3

Komputer Desktop

Speaker

TETAP

TETAP

Min. Processor Memory

Keyboard, Mouse Yes Req.

Hardisk VGA

1 TB Nvidia Geforce GTX745 4 GB

Display Operation System

LCD 23" Windows 8

Optical Drive Networking

DVD-RW Wifi

Accesories

Keyboard, Mouse

Min. Req. Speaker Satelit Subwoofer

7.5 watts per channel 13 watts

Subwoofer Driver Respon Frekuensi Suplai Daya

4

Laptop

TETAP

Min. Processor

TETAP

20

TETAP

Unit

TETAP

5

TETAP

Set

5

TETAP

Unit

Intel Core i7 4790 3,6 GHz 8 GB

Req.

One 6.5” (165 mm) side-firing subwoofer 40 Hz – 15 KHz Four 1” (28 mm) highfrequency micro drivers Two 3” (75 mm) mid-bass drivers 2.8GHz Quad-core Intel Core i7, Turbo Boost up to 4.0GHz

Memory

Min. Req. Processor Memory

16GB 1600MHz DDR3L SDRAM Hardisk

Hardisk 1TB PCIe-based Flash Storage

VGA

VGA Intel Iris Pro Graphics + AMD Radeon R9 M370X with 2GB GDDR5 memory Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

2.5GHz Quad-core Intel Core i7, Turbo Boost up to 3.7 GHz 16GB 1600MHz DDR3L SDRAM 512 GB PCIe-based Flash Storage Intel Iris Pro Graphics + AMD Radeon R9 M370X with 2GB GDDR5 memory

95

Display

5

Software

TETAP

6

Laptop

TETAP

7

Hardisk external Printer

8

Display

Operation System

15-inch with Retina display Mac OS X Yosemite

Networking Camera

Wifi Yes

15-inch with Retina display Mac OS

Operation System Networking Camera

Wifi Yes

Setara (Care protection plan) Min. Req.Intel Core i5, 2.5 Ghz, Wifi, DDR3 4 GB, HDD 500 GB Sata, DVD-RW, Vga Intel, Camera, LCD 13.3", Mac OS

TETAP

5

TETAP

Unit

TETAP

20

TETAP

Unit

TETAP

Min. Req.Hard Disk External 16 TB G-Speed Studio RAID with Thunderbolt 2 storage solution

TETAP

1

TETAP

unit

TETAP

Min. Req. Platform Colour Laser Metode Cetak Laser, Maks. Besaran Kertas A3S , Maks. Resolusi 1200 Effective Print Resolution 1200 x 2400 dpi, Kecepatan Cetak B/W 55 ppm, Kecepatan Cetak Warna 50 ppm ppm, Monthly Usage Volume 260,000 pages/month, Konektivitas USB Kesesuaian Sistem Operasi Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows Vista x 64, Microsoft Windows 7 x 64, Microsoft Windows Server 2003, Microsoft Windows Server 2003 x 64, Microsoft Windows Server 2008, Microsoft Windows Server 2008 x 64, Mac 9.2.2, Mac OSX 10.3.9 – 10.4.11 (excluding 10.4.7), 10.5/10.6 Prosessor New ASIC 933MHz CPU, Memori Standar 1 GB Maks. Memori 2 GB, Bahasa PCL, Adobe Postscript 3, XPS, PDF, Jaringan Available, Input Tray #1 590 sheets : 500 sheets (1 Tray) + Bypass (90 sheets), Compatible Media Sizes Input Paper Size (IOT 1 Tray) : Min : A5 or 139.7 x 182 mm

TETAP

3

2


Unit

96

9

Harddisk External

TETAP

Max : A3S or 297 x 431.8 mm Input Paper Size (Bypass Tray) : Min : PostCard size or 88.9 x 98.4 mm Max : SRA3S, 12 x 19S or 320 x 1219 mm Duplex Printing Available, Power Consumption During Sleep Mode : 2W or less, During Standby : 75W , During Continuous Printing : 900W , Dimensi 640 x 600 x 699mm (WxHxD), Berat 81.6 kg Min. Req. Capacity 4 Tb USB 3.0 + eSata Device TypeHard drive - external ( desktop ) Capacity4 TB InterfaceFireWire 800 / USB 3.0 / eSATA-300 Width7.2 in

TETAP


TETAP 8

Unit

97

10

Harddisk External

TETAP

Min. Req. Device TypeHard drive array Installed Devices / Modules Qty2 Supported Devices / Modules Qty2 Total Array Capacity6 TB HDD Array External InterfaceFireWire 800, USB 3.0 Storage Controller Type1 x RAID integrated Max Storage Devices Qty2 RAID LevelRAID 0, RAID 1 TypePlug-in module Capacity2 x 3 TB Spindle Speed7200 rpm Expansion / Connectivity Interfaces2 x FireWire 800 - 9 pin FireWire 800 1 x USB 3.0 System Requirements OS RequiredApple MacOS X 10.5 or later, Microsoft Windows Vista / XP / 7 / 8 Cables Included1 x SuperSpeed USB cable 1 x IEEE 1394b cable Software IncludedGenie Backup Manager Pro, Intego Backup Manager Pro, LaCie Desktop Manager Included AccessoriesStand Power DeviceExternal power adapter Voltage Required50/60 Hz Dimensi:Width3.6 in; Depth6.8 in; Height7.9 in; Weight7.9 lbs Manufacturer Warranty :Service & Support3 years warranty Service & Support DetailsLimited warranty - 3 yearsm

TETAP


TETAP 8

Unit

98

11

12

Harddisk external

TETAP

Software

TETAP

Min. Req. Capacity : 2 Tb Interface : USB 3.0 port (USB 2.0compatible) Rotational Speed (rpm) : 5400 for item #'s 301555, 301558, and 9000193 7200 for item # 301556 Interface Transfer Rate : USB 3.0: up to 5Gb/s USB 2.0: up to 480Mb/s Maximum Drop Height : 1.2 m / 47.2 in. in nonoperating mode (dropping is not recommended in operating mode) Size : 86 x 135 x 19 mm / 3.4 x 5.3 x 0.75 in. Weight : 240 g / 8.5 oz. System Requirements : Computer with a USB 3.0 or USB 2.0 port** Latest version of Windows® XP, Windows Vista®, Windows 7, Windows 8 / Mac OS® X 10.5 (Intel Only), 10.6, 10.7, 10.8 Minimum free disk space: 600MB recommended Check www.lacie.com/usb3mac for USB 3.0 Mac compatibility Box Content : LaCie Rugged Mini USB 3.0 Hard Disk USB 3.0 cable (USB 2.0compatible) Quick Install Guide Complete Software suite: Pr (preloaded: PrivatePublic, Backup Assistant, EcoMode

TETAP

Min .Req. Used for Application External monitoring of video Used for Editing and Timeline Used for editing Trimming Used for editing Effects

TETAP

TETAP

Unit

25

Unit

8


30

99

Used for editing Audio Minimum System Requirements

OS X v10.10.2 or later 4GB of RAM Intel HD Graphics 3000 or later 256MB of VRAM 4.15GB of disk space

13

Software

TETAP

Min. Req Used for Industry-Standard Encoding Support Used for Built-in Distributed Encoding Used for Dolby Digital Plus Professional Encoding Used for Video Filters Used for Audio Effects Minimum System Requirements

TETAP

30

25

Unit

TETAP

30

25

Unit

OS X v10.10.2 or later 4GB of RAM Intel HD Graphics 3000 or later 256MB of VRAM 1.2GB of disk space

14

Software

TETAP

Used for 3D Compositing Environment Minimum System Requirements

OS X v10.10.2 or later 4GB of RAM Intel HD Graphics 3000 or later 256MB of VRAM 4.7GB of disk space (3.55GB app, 1.2GB supplemental Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

100

content) 15

Editing System

TETAP

Hardware Editing

High Resolution LCD Displays (5 super bright full color displays show menus and indicators for a massive 32 soft knobs and 30 soft keys. Menus update automatically to show the quickest and most direct keys to every feature so you never waste time searching through long menus.), Illuminated Keys (Custom backlit keys feature RGB color and intensity to suit your mood and taste! No other control surface looks as amazing in a darkened room), Soft Knobs (Each soft knob allows super fine parameter adjustment and with a simple push, you can set each parameter back to the default.), Shadows, Tones and Highlights (With a single key you can switch your trackballs to grading shadows, mid tones and highlights using log controls with high and low range, contrast and master pivot.), Individual Camera RAW Controls (You get direct GPU debayer controls on the panel for exposure, contrast, lift, gain, color temperature, tint, highlight and lowlight recovery, saturation, color boost and mid tone detail. Adjusting camera RAW files has never been easier or faster.), Slide out Keyboard (Use the slide out keyboard when you need to enter clip metadata,

TETAP


1

TETAP

Set

101

name files, nodes or put notes on markers. When your finished the keyboard retracts into the control surface.), Transport Controls (The jog/shuttle knob and transport control keys give you full control of your project timeline or deck.)

PC

Intel Xeon E5 dengan cache L3 sebesar 10 MB dan Turbo Boost hingga 3,9 GHz, 12 GB (tiga 4 GB) dari memori DDR3 ECC 1866 MHz, Prosesor grafis AMD FirePro D300 ganda dengan masing-masing 2 GB GDDR5 VRAM, 1280 prosesor streaming, Bus memori selebar 256 bit, Bandwidth memori 160 GB/dtk, Performa 2 teraflop, Mac OS,


102

Monitor (2 unit)

16

Software

TETAP

Graphic design software used for

Thunderbolt, Resolusi: 2560x1440 piksel, Warna (maksimum): 16,7 juta, Rasio aspek: 16:9, Sudut penayangan: 178° horizontal; 178° vertikal, Kecerahan: 375 cd/m2, Rasio kontras: 1000:1, Waktu respons: 12 md Vector illustration & page layout

TETAP

20

TETAP

Unit

TETAP

5

TETAP

Unit

Versatile drawing and tracing tools Professional photo editing Minimum System Requirements

17

Software

TETAP

Easy website design Microsoft Windows 8/8.1 (32bit or 64-bit editions), Windows 7 (32-bit or 64-bit editions), all with latest service packs installed. Intel Core 2 Duo or AMD Athlon 64. 2 GB RAM

1 GB hard disk space (for installation without content) Mouse, tablet or multi-touch screen 1280 x 768 screen resolution DVD drive (required for box installation) Microsoft Internet Explorer 8 or higher Retouch images with astonishing ease, control, and precision in Adobe Photoshop Extended Dive into 3D artwork creation with intuitive oncanvas and in-context scene editing. Drag shadows into place, animate 3D objects


103

Enhance any clip using full range of familiar tools in Photoshop Extended, and combine clips and stills with transitions, audio, and effects Quickly create photographic blur effects

18

Switch Hub

TETAP

19

Standard Equipment Rack

TETAP

20

UPS

TETAP

Easily create seamlessly tiled vector patterns in Adobe Illustrator Min. Req 48 10/100/1000BASE-TX Ports Ports 4 Combo 10/100/1000BASE-T Ports/SFP Slots Media interfaces

RJ 45

Manageable

Yes

Min. Req Close Rack 19" 20U depth 855mm Acyrilic Front Door & Back Metal Door 1 Set Roof Fan Include 2 Fan 1 Set Vertical Power 6 Outlets , European Type 50 Set Cage Nut + Screw + Ring Min. Req Form Factor Daya Keluar Voltase Masuk

Tower

TETAP

2

TETAP

Unit

TETAP

1

TETAP

Set

TETAP

45

40

Unit

600VA / 360W Voltage Range : 140-300 VAC Frequency : >40 Hz

Voltase Keluar

Voltage : 230V Voltage Regulation (Batt Mode) : ± 10% Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

104

Frequency : 50 Hz Frequency Regulation (Batt Mode) : ± 1% Output Waveform : Simulated Sinewave Baterai

21

22

AC SPLIT

Meja Komputer

TETAP

Meja Komputer + Kursi

Battery Type & Number : 12V/7AH - 1 PC Recharge Time : 8 hours to 90% after complete discharge

Kabel power belum tersedia Aliran Udara Optimal Kompresor BLDC Plasmaster Cyclotron Filter Energy Saving (Hemat Energi) Cooling Capacity kBtu/hr (Min - Rating - Max) 18200 Power Input (Rating) Cooling(W) 1780 2 PK Min. Material

Req

Board Thickness

Particle kg/m3

Board

density

Top Table 30 mm Modesty Panel 18 mm

680

Minimum Requirements AC Split 2 PK Low watt

Half Rounded

Profiling Process

Soft Forming

TETAP

Unit

45

40

Unit

Auto cleaning Filter udara anti baketri

Meja Komputer Min. Req Material Board Thickness

Table Leg 30 mm / 18 mm Top Table Profile

2

Top Profile

Table


Particle Board density 680 kg/m3 Top Table 30 mm Modesty Panel 18 mm Table Leg 30 mm / 18 mm Half Rounded

105

Laminate Material Edging Material

Decorative Paper Coated Plastic Molding

Melamine

Hardware

Imported from Germany

Color Available

Beech / Grey / Mahogany

Profiling Process Laminate Material Edging Material Hardware

Soft Forming Decorative Paper Melamine Coated Plastic Molding Imported from Germany Beech / Grey / Mahogany

Color Available Kursi Dimension WxDxH (mm) Seat Height (mm) Seat & Back Material Frame Finishing Upholstery Color 23

Material Instalasi

TETAP

Kabel (Listrik Serabut (NYY HY), warna hitam, jenis ukuran 2x2.5, jenis ukuran 3x2.5; RG-45; LAN) Konektor (jack listrik dan terminal kabel listrik) Panel listrik ruangan Kabel Try

460 x 440 x 952 440 Vinyl Powder Coating Black TETAP

1

TETAP

Lot

TETAP

2

TETAP

Unit

Instal software Penutup Ruangan 24

Pemadam Api Ringan

TETAP

Media dry chemical powder Kapasitas 6 Kg Tekanan Dalam


106

Tabung 15 Bar Jarak Semprot 3 12 M Efektif Penyemprotan 95 %

D. Laboratorium Foto Grafi No 1 1

Nama Barang

Spesifikasi

2 Kamera Digital

3 Minimum Requirements Resolusi Gambar

24.2 Megapixels

Sensor

DX-Format CMOS

Ukuran Gambar

6000 x 4000

Format Gambar

Still Images: JPEG, RAW Movies: MPEG-4 AVC/H.264 Audio: Linear PCM (Stereo)

Lens Mount

F

Auto Fokus

Auto & Manual

Sistem Metering

3D Color Matrix Metering, Center-weighted average metering, Matrix, Spot metering Auto, 100-25600 (Extended Mode: 51200102400) Type: Electronic & Mechanical

ISO Sensitivity Shutter

Speed: 30 - 1/8000 second, Time Mode Lensa

AF-S 18-105mm VR Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

Volume Awal

Volume Perubahan

Satuan

4 3

5 2

6 Unit

107

2

Kamera Digital

Minimum Requirements Resolusi Gambar

2

Sensor

16.2 million CMOS, 36.0 x 23.9 mm

Image Processor

EXPEED 4

Dust Reduction System

Yes

Format Gambar

Still Images : JPEG, RAW, TIFF

Video Recording

Yes, NTSC/PAL

Format Video

Movies: MOV, MPEG-4 AVC/H.264

Lens Mount

F

Auto Fokus

Auto & Manual

Ragam Auto Fokus

Automatic (A), Continuous-servo AF (C), Full-time Servo (F), Manual Focus (M), Single-servo AF (S) 3D Color Matrix Metering, Center-weighted average metering, Spot metering -3 EV to +1 EV (in 1/3, 1/2 or 1 EV steps)

Sistem Metering Exposure Compensation ISO Sensitivity Shutter

Auto/Manual, 200 - 25600, Expandable to 409600 Type : Electronic & Mechanical Speed : 30 - 1/8000 sec, Bulb Mode

White Balance Viewfinder

Auto, Cloudy, Color Temperature, Direct Sunlight, Flash, Fluorescent, Incandescent, Preset Manual, Shade Type : Pentaprism Eye Point : 18.00 mm Magnification : Approx. 0.70x

LCD Monitor

3.2" Rear Screen LCD (921,000)

Internal Flash

1st Curtain Sync Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

TETAP

Unit

108

Hi-Speed Sync Rear Curtain/Slow Sync Rear Sync Red-eye Reduction Slow Sync Slow Sync/Red-eye Reduction

3

Kamera Digital

Media Penyimpanan

CompactFlash, XQD

Konektivitas

1/8" Headphone, 1/8" Microphone, HDMI C (Mini), NIkon 10-Pin, USB 2.0, X-Sync Socket

Minimum Requirements Pixels

2 Actual: 15 Megapixel Effective: 12.8 Megapixel

Sensor

1.5" (18.7 x 12.5 mm) CMOS

Bit Depth

14-bit

File Formats

Still Images: JPEG, RAW Movies: MP4, MPEG-4 AVC/H.264 Audio: AAC LC

Max Resolution

4352 x 2904

Aspect Ratio

1:1, 3:2, 4:3, 4:5, 16:9

Image Stabilization

Optical

Optics Lens

14 elements in 11 groups EFL: 12.5-62.5mm (35 mm equivalent: 24120mm) Aperture: f/2 (W) - 3.9 (T)

Zoom

Optical: 5x Digital: 4x Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

TETAP

Unit

109

Focus Range

Wide: 1.97" (5 cm) - Infinity Telephoto: 1.31' (40 cm) - Infinity Wide Macro: 1.97" (5 cm) - 1.64' (50 cm) Quick: 4.92' (1.5 m) - 65.62' (20 m)

Exposure Control ISO Sensitivity

Auto, 100-12800

Shutter

1 - 1/4000 15 - 1/4000 in Shutter Priority Mode 60 - 1/4000 in Manual Mode

Exposure Metering

Center-weighted, Evaluative, Spot

Exposure Modes

Modes: Aperture Priority, Auto, C1, C2, Creative Filters, Creative Shot, Custom, Hybrid Auto, Manual, Movie, Program, SCN, Scene Modes, Shutter Priority Compensation: -3 EV to +3 EV (in 1/3 EV steps) Auto, Cloudy, Custom 1, Custom 2, Daylight, Flash, Fluorescent, Fluorescent H, Multi-Area White Balance, Shade, Tungsten, Underwater

White Balance Modes

Flash Flash Modes

Auto Flash On Off Slow Sync

Built-in Flash

Yes

Maximum Effective Flash Range

Wide: 1.64 - 22.31' (0.5 - 6.8 m) Telephoto: 4.59 - 11.48' (1.4 - 3.5 m)

External Flash Connection

Hot Shoe

Memory Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

110

Memory Card Type

SD SDHC SDXC

Recording Video Recording

Yes, NTSC/PAL

Resolution

1920 x 1080: 30 fps, 15 fps 1280 x 720: 30 fps, 6 fps, 3 fps, 1.5 fps 640 x 480: 30 fps, 6 fps, 3 fps, 1.5 fps

Video Audio Recording

Built-in Mic: With Video, Stereo

Viewfinder/Display Screen Screen Coverage 4

5

Lensa Kamera

Lensa Kamera

3.0" LCD Rear Touch Screen Tilt (1,040,000 pixels) 100%

Minimum Requirements Focal Length

50mm

Lens

Telephoto Prime G

Image Stabilization

No

Lens Motor

Yes

Berat

280g

Min. Jarak Fokus

1.5' (0.45 m)

Jarak F Stop

1.4

Angle of View

46° (FX-format); 31°30' (DX-format)

Groups / Elements

7/8

Aperture Blade

9

Kelengkapan Paket

Lens Cap, Rear Cap, Lens Hood, Lens Case

Minimum Requirements Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

5

4

Unit

1

TETAP

Unit

111

Focal Length

600mm

Aperture

Comparable 35mm Equivalent on DX Format Focal Length: 900 mm Maximum: f/4 Minimum: f/22

Angle of View

4° 10' DX Picture Angle: 2° 40'

6

Lensa Kamera

Minimum Focus Distance

15.7' (4.79 m)

Magnification

0.14x

Maximum Reproduction Ratio

1:07

Elements/Groups

15-Des

Diaphragm Blades

9, Rounded

Image Stabilization

Yes

Autofocus

Yes

Tripod Collar

Yes Fixed - rotating


2

Focal Length

28 - 300mm

Aperture

Comparable 35mm Equivalent on APS-C Format Focal Length: 42 - 450 mm Maximum: f/3.5 - 5.6 Minimum: f/22

Angle of View

74° - 8° 10' DX Picture Angle: 53° - 5° 20'


1.64' (50 cm)

Magnification

0.32x

Elements/Groups

19/14

Diaphragm Blades

9


TETAP

Unit

112

7

Lensa Kamera

Image Stabilization

Yes

Autofocus

Yes

Tripod Collar

No


1

TETAP

Unit

1

TETAP

Unit

70 - 200mm Comparable 35mm Equivalent on DX Format Focal Length: 105 - 300 mm

Aperture

Maximum: f/2.8 Minimum: f/22

Angle of View

34° 20' - 12° 20' DX Picture Angle: 22° 50' - 8°

8

Lensa Kamera


4.6' (1.40 m)

Magnification

0.12x

Elements/Groups

21/16

Diaphragm Blades

9

Image Stabilization

Yes

Autofocus

Yes

Tripod Collar

Yes Removable - rotating


16 - 35mm

Aperture

Comparable 35mm Equivalent on DX Format Focal Length: 24 - 52.5 mm Maximum: f/4 Minimum: f/22

Angle of View

107° - 63° DX Picture Angle: 83° - 44°


11.42" (29 cm)


113

9

Lensa Kamera

Magnification

0.25x


1:04

Elements/Groups

17-Des

Diaphragm Blades

9, Rounded

Image Stabilization

Yes

Autofocus

Yes

Tripod Collar

No


10 - 24mm

Aperture

Comparable 35mm Equivalent on DX Format Focal Length: 15 - 36 mm Maximum: f/3.5 - 4.5

1

TETAP

Unit

5

4

Unit

Minimum: f/22

10

Filter

Angle of View

109° - 61°


9.45" (24 cm)

Magnification

0.20x


1:05

Elements/Groups

14-Sep

Diaphragm Blades

7, Rounded

Image Stabilization

No

Autofocus

Yes

Tripod Collar

No

Min. Req. These filters serve as lens protectors and do not affect color balance. Multilayer coating diminishes internal reflections and improves color rendition

77mm Filter


114

11

Filter

12

Filter

13

Monopod

Min. Req. These filters serve as lens protectors and do not affect color balance. Multilayer coating diminishes internal reflections and improves color rendition Min. Req. These filters serve as lens protectors and do not affect color balance. Multilayer coating diminishes internal reflections and improves color rendition Minimum Requirements

52mm Screw-On

2

TETAP

Unit

58mm Filter NC

2

TETAP

Unit

1

TETAP

Unit

attachment (top)

1/4'' and 3/8'' screw attachment type

bubble spirit level (no.)

1 number

Center Of Gravity

55 mm

Color

black color

counterbalance

yes

Counterbalanced Weight

2.4 kg

front tilt

-70° / +90° tilt range

independent tilt lock

yes

material

aluminum

maximum working temperature

60 °C

minimum working temperature

-10 °C

plate type

500PLONG

quick release

yes

Safety Payload Weight

5 kg

tilt drag

fluid cartridge with fixed drag

leg sections

4 number Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

115

Maximum Height

200.5 cm

Minimum Height

77 cm 39x72 Kit with 3 Scrims 37 x 72' Aluminum Frame Fabric for Frame, White/Soft Gold (39x72', 1x1.8m) Fabric for Frame, White Translucent (39x72', 1x1.8m) GripJaw Clamp Heavy Duty Grip Swivel - 2.5' (6.4cm) Low power consumption & maintenance cost; long battery life. LED indicators on both receiver and transmitter. Test button on transmitter for test firing. Additional receivers can be purchased for multi-flash set-ups to trigger all lights wirelessly. Typical battery life of about 20,000 usages. Maximum effective distance range of approximately 21 yards (20m) Product Dimensions: 12 x 10 x 3 inches ; 1 pounds

1

TETAP

Unit

2

TETAP

Unit

14

Reflector


15

Trigger


16

Baterai


EN-EL15, original battery rechargeable batteries provide extended life and consistent power, even in colder conditions

5

TETAP

Unit

17

Baterai


EN-EL18, original battery rechargeable batteries provide extended life and consistent power, even in colder conditions

5

TETAP

Unit

18

Lampu studio


Protective Cup 3 pcs lighting

2

TETAP

set

Transmiter 1 pc Synchro Cord 1 pc Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

116

Head Bag 1 pc Light stand set A 1 set Portalite 66 x 66 2 pc 19

20

Tripod

Flash meter

Minimum Requirements Material

Aluminum Alloy

Load Capacity

8.8 lb (4.0 kg)

Maximum Height

56.7" (144 cm)

Maximum Height w/o Column Extended Minimum Height

48.4" (123 cm)

Folded Length

15.75" (40 cm)

Type

Rapid

Sections

1

Column Cross Section

3 Faceted

Column Diameter

22 mm

Finish

Black

Head Type

Ball head

Quick Release

Yes, with included 200PL plate

Camera Attachment

1/4"-20 Threaded stud

Measuring Modes

TETAP

Unit

1

TETAP

Unit

13.4" (34 cm)

Minimum Requirements Measuring System

1

Incident or reflected for flash and ambient light; Silicon photo diode Ambient and flash (cord, cordless) - incident and reflected (40 degrees)

Receptor Head

Non-rotating, non-interchangeable

Aperture/Shutter Priority

Shutter speed priority


117

Display Readout

ISO Range f/Stop Display Range

Improved LCD - Digital LCD; Enhanced icons and symbols for better readability; 1/10th of a stop increment displayed; ASA and battery indications are always on ISO 3 ~ 8000 in 1/3 increments

Shutter Speed - Ambient

f/0.5 ~ f/90 9/10; Full, 1/2 and 1/3 selectable f/stop increments 60 sec. ~ 1/8000 sec

Shutter Speed - Flash

1 sec. ~ 1/500 sec

EV Range (ISO-100)

Display range: EV -5 ~ EV 26.2 Measuring Range: EV 0 ~ EV 19.9

Cine Speeds

8 ~ 128fps Radio Remote Control Includes Transmitter, DC Receiver Effective to 590' Indoors, 200' Outdoors Sync Up to 1/250s Transmitter Uses One 3V CR2450 Battery Receiver Uses 2 AA Batteries (Included)

21

Radio slave


22

Stand+background


2

TETAP

set

1

TETAP

Unit

1

TETAP

Unit

Accepts 11' Seamless or 12' Muslins Adjust. 4 Section Crossbar - 6,8 or 12' Two Heavy-Duty Stands w/Non-Skid Feet Adjustable Stands - 39" to 10.5' 16-Gauge Aluminum Tubing Versatile (3/8" Spigot, 1/4"-20 & 5/8") 100% Cotton Fabric is Machine Washable Incl. Seamless with 4" Rod Pocket on Top Canvas Carry Bag with Individual Sleeves 23

Whitebox still life

Minimum Requirements Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

118

Accepts 11' Seamless or 12' Muslins Adjust. 4 Section Crossbar - 6,8 or 12' Two Heavy-Duty Stands w/Non-Skid Feet Adjustable Stands - 39" to 10.5' 16-Gauge Aluminum Tubing Versatile (3/8" Spigot, 1/4"-20 & 5/8") 100% Cotton Fabric is Machine Washable Incl. Seamless with 4" Rod Pocket on Top Canvas Carry Bag with Individual Sleeves 24

Memory card


SDHC, extreme pro

Storage Capacity

16 GB

Speed Class

10

UHS Speed Class

U1

Speed (X-rating)

633x

Bus Interface Speed

UHS Class I

Data Transfer

Read Speed 95 MB/s Maximum

5

TETAP

Unit

5

TETAP

Unit

Write Speed 90 MB/s Maximum File System 25

Memory card

FAT32


SDHC, extreme pro

Storage Capacity

32 GB

Speed Class

10

UHS Speed Class

U1

Speed (X-rating)

633x

Bus Interface Speed

UHS Class I


119

Data Transfer

Read Speed 95 MB/s Maximum Write Speed 90 MB/s Maximum

File System 26

Memory card

FAT32


CompactFlash Type I

Storage Capacity

32 GB

Speed Class

1067x

UHS Speed Class

U1

Speed (X-rating)

633x

Video Performance Guarantee

VPG- 65

Data Transfer

Read Speed 160 MB/s Maximum

2

TETAP

Unit

3

TETAP

Unit

3

TETAP

Unit

Write Speed 150 MB/s Maximum File System

FAT32 120 L Capacity with 4 Drawers, Hygrometer, External and Internal Humidity Control

27

Dry box


28

Speedlight

Minimum Requirements Electronic construction Guide number (at 35 mm zoom head position, in FX format, standard illumination pattern, 20°C/68°F) Illumination pattern

Effective flash output distance range (in i-TTL, auto aperture flash or non-TTL auto flash mode)

Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry 34/111.5 (ISO 100, m/ft), 48/157.5 (ISO 200, m/ft) There are three illumination patterns: standard, even and center-weighted The light distribution angle is automatically adjusted to the camera's image area in both FX and DX formats 0.6 m to 20 m (2 to 66 ft.) (varies depending on camera's image area setting, illumination pattern, ISO sensitivity, zoom head position, and lens aperture in use)


120

Flash mode Other functions Multiple flash-unit photography operation Flash exposure control set on the camera

Bounce capability

Power source

i-TTL, Auto aperture flash, Non-TTL auto flash, Distance-priority manual flash, Manual flash, Repeating flash Test firing, monitor pre-flashes, AF-assist illumination for multi-point AF, and modeling illumination Advanced Wireless Lighting, SU-4 type wireless multiple flash-unit photography The SB-910 is fully recycled: lights up Insufficient flash output for correct exposure (in i-TTL, auto aperture flash, non-TTL auto flash or distance-priority manual flash mode): blinks Flash head tilts down to 7° or up to 90° with click-stops at -7°, 0°, 45°, 60°, 75°, 90° Flash head rotates horizontally 180° to the left and right with click-stops at 0°, 30°, 60°, 75°, 90°, 120°, 150°, 180° Use four AA-size batteries of the same brand from any of the following types: 1.5 V LR6 (AA-size) alkaline batteries 1.5 V FR6 (AA-size) lithium batteries

Flash-ready indicator

1.2 V HR6 (AA-size) rechargeable Ni-MH batteries The SB-910 is fully recycled: lights up

Flash-ready indicator

Insufficient flash output for correct exposure (in i-TTL, auto aperture flash, non-TTL auto flash or distance-priority manual flash mode): blinks The SB-910 is fully recycled: blinks


121

(in remote mode)

29

Radio slave

Flash duration

Insufficient flash output for correct exposure (in i-TTL, auto aperture flash or non-TTL auto flash mode, or AUTO mode in SU-4 type wireless multiple flash-unit photography): blinks Approx. 1/880 sec. at full output


Very Small Remote Control System

5

TETAP

Unit

Lithium Iron Phosphate (LiFePO4) Battery Power Inverter, Continuous 800W Output 3 minutes, Delivers up to 500 flashes from a 500ws flash head, Supports up to 3000ws flash units, Large Storage Capacity 12,000m Ah Battery Kabel (Listrik Serabut (NYY HY), warna hitam, jenis ukuran 2x2.5, jenis ukuran 3x2.5) Konektor (jack listrik dan terminal kabel listrik) Panel listrik ruangan

5

TETAP

Unit

1

TETAP

media dry chemical powder

2

TETAP

Can Sync At Up to 1/150s in Normal Mode 8 Frequencies Available 4 Workgroups Possible Range: Indoor-165'/Outdoor-395' Movable Antenna Optimizes Reception 30

Baterai pack

Materi instalasi

31

Pemadam api ringan


Kapasitas 6 Kg Tekanan Dalam Tabung 15 Bar Jarak Semprot 3 - 12 M Efektif Penyemprotan 95 %


Unit

122

E. Laboratorium Audio Tetap

F. Laboratorium Film No 1

Nama TV Monitor

Spesifikasi Awal


Volume Awal

Volume Perubahan

Satuan

TETAP

2

TETAP

Unit

TETAP

1

TETAP

Unit

Minimum Requirement 1024 x 600 High-Resolution Display IPS Screen with 170° Viewing Angle 1000:1 Contrast / 800 Nit Brightness 3G-SDI Input and Loop-Through Output HDMI Input and Output Icon-Driven Operating System 2-Bar Waveform / Stereo Headphone Out DSLR Ratio Adjustment with 4 Presets Numerous Focus / Exposure Features Polycarbonate Screen Protection

2

Kamera Film

Minimum Requirement 3840 x 2160p Global Shutter CMOS Sensor, EF Lens Mount for Broad Compatibility 12 Stops of Dynamic Range 10.1", 1080p Flip-Out LCD Screen Dual 5" Touchscreens for Menu Access Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

123

Records CinemaDNG RAW and ProRes 12G-SDI Output for 10-Bit 4:2:2 4K 2x XLR Audio Inputs with Phantom Power Aluminum Frame with 3/8"-16 Mounting LANC Port for START/STOP, Iris, Focus Dual CFast 2.0 Card Slots Include : Memory Card

128GB Capacity 3400x (510MB/s) Read Transfer Speed Capture 1080p Full HD, 3D, and 4K Video For Camcorders/Digital Cameras Compatible with Memory Cards USB 3.0 Connectivity

USB 3.0 Reader

Modular Design Use with A Hub or Onthe-Go 3

Kamera Film

Minimum Requirement

TETAP

4K RAW (4096 x 2160) Output EF Lens Mount for Broad Compatibility 8.8 Mp Super 35mm-Size CMOS Sensor Also Puts Out 2K, Quad HD & Full HD 2x 3G-SDI Outputs 50 Mb/s Proxy HD Recording to CF Card 10-Bit 4K RAW at Up to 60p 10-Bit 4K Half RAW at Up to 120p Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

1

TETAP

Unit

124

12-Bit 2K 4:4:4 Signal at Up to 60p Log Gamma 4

Kamera Digital

Minimum Requirement

TETAP

3

2

Unit

TETAP

8

TETAP

Unit

22.3 MP Full-Frame CMOS Sensor, EF Lens Mount for Broad Compatibility DIGIC 5+ Image Processor 3.2" 1.04m-Dot ClearView II LCD Monitor Full HD 1080p Video Recording at 30 fps 61-Point High Density Reticular AF Native ISO 25600, Extended to ISO 102400 6 fps Shooting in RAW+JPEG 63-Zone Dual Layer Metering Sensor Magnesium Alloy Body, SD/CF Card Slots With EF 24-105mm f/4L IS USM Lens 5

Kamera Digital

Minimum Requirement 18MP CMOS Sensor dan DIGIC 5 Image Processor, EF Lens Mount for Broad Compatibility 3.0" Vari-angle Touchscreen LCD Monitor 14-bit A/D Conversion Hybrid CMOS AF Multi Shot Noise Reduction Scene Intelligent Auto Scene Mode Position Lens Aberration Correction Photobook Set-up With EF-S 18-135mm f/3.5-5.6 IS STM Lens Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

125

6

Kamera Digital

Minimum Requirement

TETAP

3

TETAP

Unit

TETAP

2

TETAP

Unit

TETAP

2

TETAP

Unit

12.2-megapixel 35mm full-frame Exmor™ CMOS sensor Wide ISO Sensitivity (ISO 50 - 409,600*2) and impressive dynamic range World’s first full-frame sensor capable of full pixel read-out without binning process for Full HD/4K video output*3 *4 Pro-Quality video functions such as Picture Profile, S-Log2 gamma, time code & more BIONZ X™ image processing engine High-contrast, high-resolution XGA OLED Tru-Finder 7

Lensa Kamera

Minimum Requirement 50mm T1.3, EF Mount Prime, Cinema Lens 11-Blade Rounded Diaphragm Stepless and Manual Diaphragm Ring 300˚ Barrel Rotation Superb Available Light Performance Strong Bokeh and Circular Highlights Supports 4K Recording Quality

8

Lensa Kamera

Swaps Easily with 24 and 85mm Relatives Minimum Requirement 85mm T1.3 EF Mount Prime, Cinema Lens Achieves Telephoto Look 11-Blade Rounded Diaphragm Stepless and Manual Diaphragm Ring 300˚ Barrel Rotation Superb Available Light Performance Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

126

Strong Bokeh and Circular Highlights Supports 4K Recording Quality

9

Lensa Kamera

Swaps Easily with 24 and 50mm Relatives Minimum Requirement

TETAP

2

TETAP

Unit

TETAP

2

TETAP

Unit

TETAP

2

1

Unit

24mm T1.5 Wide-Angle EF Mount Prime, Cinema Lens 11-Blade Rounded Diaphragm Stepless and Manual Diaphragm Ring Superb Low Light Performance Strong Bokeh and Circular Highlights Supports 4K Recording Quality Swaps Easily with 50 and 85mm Relatives 10

Lensa Kamera

Minimum Requirement 135mm T2.2 Telephoto Prime for Full-Frame Format, EF Mount Prime EF Mount Prime, Cinema Lens T2.2 Maximum Aperture with 11 Blade Iris Markings on Both Sides of the Barrel

11

Lensa Kamera

Similar Dimensions to Other CNE Lenses Minimum Requirement Engineered for 4K Resolution Cameras, EF Mount Prime, Cinema Lens Covers APS-C & Super 35 Sensor Sizes 11 Blade Iris for Attractive Bokeh f/2.8 Aperture for Low Lit Scenes 300° Rotation For Focus Reduced M.O.D. of 23.6" Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

127

12

Lensa Kamera

Minimum Requirement

TETAP

1

TETAP

Unit

TETAP

3

TETAP

Unit

TETAP

3

TETAP

Unit

30-105mm T2.8 Covers APS-C & Super 35 Sensor Sizes, EF Mount Prime, Cinema Lens Suitable for 4K Image Capture 11-Blade Iris for Smooth Bokeh Geared Inner Focusing Reduces Breathing Easy-to-Read Engraved Markings 160° Rotation for Zoom 300° Rotation for Focus 13

Lensa Kamera

Minimum Requirement 24-70mm F2.8 Carl Zeiss Vario Sonar

14

Lensa Kamera

Lens Groups / Elements

13 / 17

Aspherical Lenses

2

Angle of View (35mm)

84° - 34°

Angle of View (APS)

61° - 23°

Aperture Blades

9

Circular Aperture

Yes

Maximum Magnification Ratio

0.25

Minimum Aperture

22

Minimum Focus

0.34m

Filter Diameter

77mm

Minimum Requirement 70-400MM F/4-5.6G SSM Mount for Full-Frame Sensors Aperture Range: f/4-32 Super Sonic Wave Autofocus Motor Two Extra-Low Dispersion Glass Elements Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

128

Nano AR Coating Three Focus Hold Buttons Rounded Nine-Blade Aperture 15

16

Minimum Requirement

Filter Lensa

Circular Filter

Polarizing

Type

UV/protection

Size

67 mm

Grade

UV

Filter Factor

0

Effect Construction

Absorbs UV rays and reduces bluish cast from daylight ColorCore technology

Front Filter Thread Size

67 mm

Front Lens Cap Size

67 mm

Minimum Requirement

TETAP

11

TETAP

Unit

TETAP

3

TETAP

Unit

TETAP

5

TETAP

Unit

TETAP

20

TETAP

Unit

Canon 52mm Drop-In Circular Polarizer Filter works with Canon's super telephoto lenses. Compatible with most IS super telephoto lenses. 17

18

Filter Lensa

Memory Card

Minimum Requirement Type

UV protector

Size

77 mm

Filter Factor

0

Effect Front Filter Thread Size

Protects front lens element and reduces bluish cast from daylight 77 mm

Front Lens Cap Size

77 mm

Minimum Requirement Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

129

16GB Data Storage Capacity Class 10 Speed Ultra High Speed Class 1 Max. Read Speed: 95 MB/s 19

Memory Card

Minimum Requirement

TETAP

20

TETAP

Unit

TETAP

10

TETAP

Unit

TETAP

10

TETAP

Unit

TETAP

6

TETAP

Unit

8

TETAP

Unit

32GB Data Storage Capacity Class 10 Speed Ultra High Speed Class 3 Max. Read Speed: 95 MB/s 20

Memory Card

Minimum Requirement 32GB Storage Capacity Optimized for 4K Video Recording Up to 160MB/s Read Speed Up to 150MB/s Write Speed

21

Memory Card

Minimum Requirement 128GB Storage Capacity Read Speed up to 515 MB/s Write Speed up to 440 MB/s Full HD & 4K Video Recording Tested Under Extreme Conditions

22

23

Baterai

Baterai

Minimum Requirement Chemistry

Lithium-ion

Capacity

1865 mAh

Output Voltage

7.2 VDC

Minimum Requirement 128GB Storage Capacity

Minimum Requirement Chemistry Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

Lithium-Ion

130

Read Speed up to 515 MB/s

Capacity

1120 mAh

Write Speed up to 440 MB/s

Output Voltage

7.2 V

Full HD & 4K Video Recording

Watt-Hours

8.1 Wh

Tested Under Extreme Conditions 24

Dslr Rig

Minimum Requirement

TETAP

2

TETAP

Unit

TETAP

2

TETAP

Unit

Shoulder Support, Follow Focus X9, MB-600 Matte Box, 6" Cage Brackets, Flexible Gear Belt, Speed Crank, Mic Suspension with 15mm Cold Shoe Adapter, Pro Zoom, Wire Organizer Clamp, Screw Tightening Key, Shoulder rig Support Rod. Specifications: Gear arm adjustable distance: 55 mm Adjustable height distance: 40 mm Gear dia: 48 mm Construction: black anodized aluminum Fit rail distance: 60 mm Fit rail dia: 15 mm Gears nylon and ABS dial index adjustment: 360 degrees Dial outside diameter: 75 mm (white wheel) Gear wt.: 30 gms Follow focus wt.: 286 gm 25

Steady cam

Minimum Requirement Dengan panel rotasi di dekat pemberat yang dapat diatur beratnya sesuai dengan kebutuhan. Tas sudah termaksud dalam standar pembelian. Panjang/ Tinggi maksimum dari Steady Cam ini adalah 80cm.

26

Slider

Minimum Requirement

TETAP

2

TETAP

Unit

27

Steady cam

8ft track dolly slider with free camera mounting clamp Minimum Requirement

TETAP

2

TETAP

Unit

Camera Steadycam System with Comfort Arm and Vest Supporting Cameras weighing upto 5kg/11lbs - FREE Arm Brace & Table Clamp Minimum Requirement

TETAP

5

TETAP

Unit

28

Action Camera / sporty camera

Effective Sensor Resolution

12 Megapixels Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

131

Media Format

Digital Still Camera Function

Video Format: H.264 compression, saved as Windows& Maccompatible MPEG4 (.mp4) file Video Resolution 4K; 4K 17:9; 2.7K; 2.7K 17:9; 1440p; 1080p; 1080p SuperView; 960p; 720p; 720p SuperView; WVGA Available Still Photo Resolution 12MP (Default), Wide, 4000 x 3000 7MP, Wide, Medium, 3000 x 2250 5MP, Medium, 2560 x 1920 Time Lapse Mode : 0.5, 1, 2, 5, 10, 30 and 60 seconds Burst Photo 0 photos/1 second (Default), 30 photos/2 seconds, 30 photos/3 seconds 10 photos/1 second, 10 photos/2 seconds,10 photos/3 seconds 5 photos/1 second 3 photos/1 second Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

132

Continuous Photo (up to 30 seconds) 3 photos/1 second (Default) 5 photos/1 second 10 photos/1 second NightShot System

Auto Low Light Automatically adjusts frame rates according to lighting conditions for enhanced low-light performance. Night Lapse

Shutter Speed

Video I/O

apture a series of photos at specific intervals and exposure times. 15, 20, 30 and 60 seconds 2, 5, 30 and 60 minutesv Auto (Default) Up to 2 seconds Fixed 10, 15, 20 or 30 seconds Mini USB Micro HDMI

Audio I/O PC Connectivity

Internal Microphone : Mono Approximately 2x greater dynamic range USB Mini, HDMI C

PC Compatibility

PC Windows and Mac

Digital Storage Media

MicroSD

Battery

Rechargeable ion battery

lithium-


133

Rated at 1160mAH, 3.8V, 4.4Wh 29

Accesoris camera

action

Minimum Requirement

TETAP

2

TETAP

Unit

30

Accesoris camera

action

Hunt Cage Kit for Action Camera Minimum Requirement

TETAP

2

TETAP

Unit

31

Projib

Action Camera Suction Mount Minimum Requirement

TETAP

2

TETAP

Unit

TETAP

2

TETAP

Unit

7' Wave DSLR Video Jib Crane with 100mm Tripod Stand Supporting Cameras weighing upto 10kg / 22lbs 32

Tripod Video

Minimum Requirement Load Capacity

35 lbs (16kg)

Maximum Height

66.5" (169cm)

Minimum Height

29.1" (73.91cm)

Folded Length

32.8" (83.31cm)

Counter Balance System

Adjustable Spring

Quick Release/Wedge Plate

Yes

Balance Plate

Yes, Sliding

Tilt Drag

0 Plus 3-Step

Tilt Range

-70/+70°

Tilt Lock

Yes

Spring Loaded Counter Balance

0 Plus 3-Step

Pan Range

360°

Pan Lock

Yes

Material legs

Aluminum

Head Attachment Fitting

3/8" Screw

Leg Stages/Sections

42065 Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

134

33

Lighting

Leg Lock Type

Flip Levers

Independent Leg Spread

Yes

Spiked/Retractable Feet

Rubber Feet and Floor Spreader

Minimum Requirement

TETAP

2

1

Unit

TETAP

2

TETAP

Unit

TETAP

2

TETAP

set

1200-watt-hmi-fresnel-kit-90-250vac Glass reflector Has a glass relfector instead of metal, making it better suited for working in a Theater setting or fixed location Accessory holder The front accessory holder is a baffle type seal used to prevent light leaks when used in a Theater setting Smooth and even A 6.9" (175mm) short focal length lens provides a smooth, even field of light 34

Lighting

Minimum Requirement Max. power draw (Watts) : 104 Comparative output : 200W HMI Including : Fresnel fixture with 6-inch lens 4-Way (8-Leaf) Barndoor Manual Yoke Power Supply

35

Lighting

US & EU Power Cord Minimum Requirement Lighting package for 3-point lighting Including : 2 unit Daylight Spot 2 unit Daylight Flood 3 unit Manual Yoke 3 unit Power Supply Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

135

3 unit Power Supply Mounting Bracket 3 unit eu Power Cord 3 unit Kit Stand 36

Dolly Pad

1 unit Trolley Case Minimum Requirement

TETAP

1

TETAP

Unit

TETAP

5

TETAP

Unit

TETAP

2

TETAP

Unit

Wheel Dia: 10” (inch) length of dolly platfoam: 48'' Width of dolly platfoam: 24'' Max Height of bazooka : 45'' Minimum Height of bazooka : 37'' Wheel material : Hard Rubber Bowl head : 100mm

37

Lighting

Dolly made from : Aluminum construction Minimum Requirement Max. power draw (Watts) : 104 Comparative output : 200W HMI Including : Fresnel fixture with 6-inch lens 4-Way (8-Leaf) Barndoor Manual Yoke Power Supply

38

Lighting

US & EU Power Cord Minimum Requirement Max. power draw (Watts) : 190 Comparative output : 1kW Tungsten Including : Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

136

Fresnel fixture with 9-inch lens 4-Way (8-Leaf) Barndoor Manual Yoke Power Supply 39

Light Stand

US & EU Power Cord Minimum Requirement

TETAP

4

TETAP

Unit

TETAP

12

TETAP

Unit

TETAP

2

TETAP

Unit

Footprint: 43" (1092mm) Weight: 13 lbs (6kg) Min/Max Height: 49.5"/136" (1257mm/3454mm) Load Capacity: 90 lbs (40kg) Folded Base: 5" (127mm) 40

Light Stand

Minimum Requirement 4-8' Lightweight Telescoping Hanger w/ Pipe Clamp & Stirrup Designed for use with light weight fluorescent or other fixtures weighing no more than 25 lbs.(11.4kg.) Engineered to telescope from the grid with nominal ceiling clearance. Telescoping Hangers are available in a wide range of lengths and attachment options for both temporary and permanent placement of lighting fixtures. Constructed of aluminum with internally welded safety collars and cast aluminum fittings. Hanger will accept all pipe clamps currently being manufactured. Size and weight is less than 50% of conventional hangers. Hangers come standard with Bolt Mount.

41

Short Shotgun Mic

Minimum Requirement Transducer

Condenser

Polar Pattern

Supercardioid/Lobar

Frequency Response

50 Hz - 20 kHz, (-3 dB)

Dynamic Range (Typical)

119 dB Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

137

Signal-to-Noise Ratio

88 dB

Maximum Input Sound Level Power Requirements

125 dB, (142 dB with 10 dB Attenuation) Phantom 48v, (+/- 4v)

Output Impedance

150 Ohms

Output Connectors

XLR-3M Type

Pad

-10 dB Attenuation Switch Yes, 5 dB/Octave @ 100 kHz Treble Emphasis Switch: 5 dB/Octave @ 10 kHz Film, Video and Broadcast Production. Treble Emphasis Switch: 5 dB/Octave @ 10 kHz Film, Video and Broadcast Production.

Low Frequency Roll-Off

Applications

42

Perangkat Komunikasi HT

Minimum Requirement

TETAP

10

TETAP

Unit

TETAP

10

TETAP

Unit

TETAP

2

TETAP

Unit

Frequency Range# 136-174MHz Memory Channels 99 CH Channel Spacing 12.5/ 25 kHz switchable Operating Temperature Range -30° C to + 60° C ( Radio) 43

Minimum Requirement

Headset HT

Headset support for handytalkie 44

Sound portable

recorder

Minimum Requirement Records 4 Channels Simultaneously Camera & Tripod Mountable Records up to 24-bit/96kHz WAV/BWF Files 2 Combo XLR/TRS & 1 Stereo 1/8" Inputs Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

138

Supports High-Output Microphones Supplies Phantom & Plug-In Power Camera Output with Level Control Built-In Mixer Powered by 4 AA Batteries Records to SD or SDHC Cards Include :

45

Handy recorder

Audio Waveform Editor Windows/ Mac Minimum Requirement

for TETAP

2

TETAP

Unit

TETAP

1

TETAP

Unit

Modular Mic and Input System Includes XY Microphone Module Includes Mid-Side Microphone Module Four XLR/TRS Inputs Record up to 6 Simultaneous Channels Record up to 24-bit/96kHz Audio Doubles as USB Audio Interface Uses SDXC Memory Cards Optional Shotgun Mic and XLR/TRS Inputs Optional Hot Shoe Mount 46

Mixer Audio

Minimum Requirement 8+2 and 12+2 channel frame sizes Built-in 24 bit Lexicon digital effects processor 32 FX settings Tap Tempo and FX setting store function 1 FX send on each channel Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

139

1 configurable auxiliary bus XLR-type and ¼” metal jack connector sockets RCA phono stereo playback inputs and record outputs 3-band EQ with a swept mid on mono inputs 3-band EQ on stereo inputs TRS insert sockets and inserts on all mono inputs Ten-segment LED output metering Intuitive and comprehensive solo system Headphone output Easily rack mountable

h

Custom Karaoke preset 47

Penyimpanan kamera

Minimum Requirement

TETAP

6

TETAP

Unit

TETAP

1

TETAP

Unit

Outside Dimensions : W809 x D372 x H845mm Inside Dimensions : W780 x D345 x H795mm Capacity

: 214L

Drawers

:2

Sheft 48

Dolly Camera

:3

Minimum Requirement Machined from heavy duty rugged use aluminum Adjustment rise from a low of 36" - to 48" with the head 3 or 4 leg dolly mounting option Accepts 75mm - 100mm - hh 150mm - heads Designed for cameras up to 20kg/44lbs 4 legs with leg locks Includes a set of 2 wheel rollers used for curve track travel Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

140

49

Long Flexi Track

Minimum Requirement

TETAP

2

TETAP

Unit

TETAP

5

TETAP

Unit

TETAP

5

TETAP

Unit

Lightweight and portabl. Constructed for heavy duty use. can be shaped into curves of any arc. Easily & simply rolled up in a few minutes. Operator can walk between rails with no worries of tripping or knocking spacers. Convenient storage/shipping container. Total length - 36ft (11meter) Diameter - 1 inch Colour - Black 50

Hard Case Lamp

Minimum Requirement 12mm Plywood with Laminated PVC Grey Carpet Interior Hinged Lid Recessed MOL Twist Latches Recessed Rubber-gripped Handles Four Caster Wheels

51

Hard Case Camera

Minimum Requirement Virtually Indestructible Waterproof Case Engineered Hard Polypropylene Exterior Three-piece Foam Set Automatic Pressure Equalization Valve Six Quick-release Easy-opening Latches Waterproof up to a Depth of 16.5' Cushioned Handle Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

141

Retractable Tow Handle Built-in wheels 52

Genset

Minimum Requirement

TETAP

Genset Frequency : 50 Hz Speed : 1500 rpm Prime power : 45 kVA Standby power : 50 kVA Phase : 3 Noise @7 m : 70 dB(A) Tank capacity : 200 liters Engine Cylinders : 3 vertical in-line Cycle : 4 stroke Compression ratio : 17,25:1 Bore x Stroke : 105 mm x 127 mm Displacement : 3,3 liters Oil Capacity : 7,9 liters Fuel consumption : 10,8 liters (100% of prime power) 8,23 liters (75% of prime power) 5,83 liters (50% of prime power) Alternator Insulation system : Class H Protection : IP23 Rated power factor : 0.8 Stator winding : Double layer concentric Standar Dokumen Pengadaan Secara Elektronik Pengadaan Barang Metode e-Lelang [Umum/Sederhana] Dengan Pascakualifikasi

1

TETAP

Unit

142

Winding pitch : Two thirds Portable Genset (pake roda) 53

Pemadam Api Ringan

Minimum Requirement

TETAP

2

TETAP

Unit

TETAP

1

TETAP

Lot

media dry chemical powder Kapasitas 6 Kg Tekanan Dalam Tabung 15 Bar Jarak Semprot 3 - 12 M Efektif Penyemprotan 95 % 54

Materia Instalasi

Minimum Requirement Kabel (Listrik Serabut (NYY HY), warna hitam, jenis ukuran 2x2.5, jenis ukuran 3x2.5; speaker; microphone; RG-45; video; genset panjang 20m; panel listrik) Konektor (listrik, jack speaker male female; jack XLR male female; jack TRS 1.4 inch, 3.5 mm, 2.5 mm male female; RCA male female) Kabel Try Penutup Ruangan

G. Laboratorium Tata Rias Tetap


143


144


2015. Tanggal: 20 Agustus untuk

Recommend Documents